using System;
class Runner
{
static void Main()
{
A a = new A();
// how to say a.PrintStuff() without a 'using'
Console.Read();
}
}
class A { }
namespace ExtensionMethod
{
static class AExtensions
{
public static void PrintStuff(this A a)
{
Console.WriteLine("text");
}
}
}
How would I call the extension method without a 'using'? And not ExtensionMethod.AExtensions.PrintStuff(a), since that doesn't make use of extension method.
It is possible to directly call your extension like so since it is simply a static method, passing the instance it will act on as the first this parameter:
A a = new A();
ExtensionMethod.AExtensions.PrintStuff(a);
This might be confusing to other developers who happen across this code if you followed this pattern for more commonly used extension methods. It would also make chaining extension calls such as LINQ appear more like a functional language because you would be nesting each call instead of chaining them.
that is possible if Extension Method and class A in same namespace,
If you have to use different namespaces then you have to use using, i don't think there is a way to do this without using. But you may reduce the number of using by putting all the extensions in one namespace like for Linq (System.Linq.Extensions)
Note : You can remove the namespace for Extension methods, then it will make them globally available
It needs the using to know where the function lives.
One example of this in Linq. Without the System.Linq using - you won't have linq enabled for any of your IEnumerable<T>'s
However, you can define the extension method in the same namespace as the caller to avoid putting in a using. This approach will however not work if it's needed in many namespaces
This makes me feel dirty, but you can put your extension methods in the System namespace.
This namespace is included by default in your question
using System;
class Runner
{
static void Main()
{
A a = new A();
// how to say a.PrintStuff() without a 'using'
Console.Read();
}
}
class A { }
namespace System
{
static class AExtensions
{
public static void PrintStuff(this A a)
{
Console.WriteLine("text");
}
}
}
Ruminations on the creation of extension methods for a type ExtendableType:
Name the class ExtendableTypeExtensions
Declare the extension class partial so that clients can add extension methods following the same pattern; and
Put the extension methods in the same namespace as the base type
unless you have a very good reason to follow a model like that of LINQ:
A substantial family of extension methods,
That all apply to multiple base classes.
As of C# v6.0 (circa 2015) you can use using static to access a specific class's static members without including it's whole namespace.
An example, using your code, would be:
using System;
using static ExtensionMethod.AExtensions;
class Runner
{
static void Main()
{
A a = new A();
a.PrintStuff();
Console.Read();
}
}
class A { }
namespace ExtensionMethod
{
static class AExtensions
{
public static void PrintStuff(this A a)
{
Console.WriteLine("text");
}
}
}
You can add extensions method without namespace.
This will affect the whole systems which is not recommended.
public static class StringExtensions
{
public static void HelloWorld(this String s)
{
Console.Write("Hello World");
}
}
string str = "s";
str.HelloWorld();
In our projects extensions are placed in the same namespace as class extension for. Your example:
A.cs:
using System;
namespace ANamespace
{
class A { }
}
AExtensions.cs:
namespace ANamespace
{
static class AExtensions
{
public static void PrintStuff(this A a)
{
Console.WriteLine("text");
}
}
}
Now when you add using for ANamespace for using the A class, all extensions for A class will be included too.
Related
I have a static ExceptionHelper that looks like this:
public static class ExceptionHelper
{
public static async void ShowDialog(string message)
{
// Show message
}
}
Whenever I want to call this method I do it like this at the moment:
ExceptionHelper.ShowDialog("This is a message.");
I now thought of defining an alias for the ExceptionHelper to not having to write the whole word each time I want to use it.
I know I can achieve it with using:
using Ex = MyNamespaces.ExceptionHelper;
But then I'd have to define it in each file I want to use the method. Is there a way I can define the alias globally without changing the name of the class? Or is there any attribute I can set above the class declaration?
Extension Method
You could make it an extension method on string.
public static class ExceptionHelper
{
public static async void ShowDialog(this string message)
{
// Show message
}
}
Then you would use it like so:
using WhateverNamespaceExceptionHelperLivesIn;
public class TestClass
{
public void TestMethod()
{
"This is a message".ShowDialog();
}
}
This makes your question moot - you don't have to define an alias at all.
Static imports
An alternative approach is to import the class statically. You won't need an alias, because you can reference the ShowDialog method directly. This will require C#6/Visual Studio 2015.
using static WhateverNamespaceExceptionHelperLivesIn.ExceptionHelper;
public class TestClass
{
public void TestMethod()
{
ShowDialog("This is a message");
}
}
In C# 6.0 you can use static usings:
using static MyNamespace.ExceptionHelper;
Of course not globally, that works only for defines. But in a file where you use this line, you can use the members of the ExceptionHelper without any prefix.
As of C# 10, you can now define gloabl usings.
// GlobalUsing.cs
global using static WhateverNamespaceExceptionHelperLivesIn.ExceptionHelper;
And it will now be available globally, without having to define the class name, or the namespace, at the top of each class.
// Available Globally in the Project
public class TestClass
{
public void TestMethod()
{
ShowDialog("This is a message");
}
}
This might apply, even though you are using a method. You could use an ENUM type instead that lies outside of any namespace and access globals values that way. Place the enum in a file outside of any namespace. You can access it globally that way, or if you have trouble, using the "global" keyword below if you have any trouble referencing it:
enum Size
{
SMALL = 1,
MEDIUM = 5,
LARGE = 10
}
class Test {
int mysize1 = (int)Size.SMALL;
int mysize2 = (int)global::Size.MEDIUM;
}
I'm attempting to extend my custom classes and running into a problem where it cannot find the extension method.. I have and can extend any built in classes or even ones contained within DLL's. I don't know if this is a compilation error or if I'm doing something wrong. Threw together a small program for an example, won't compile..
Here's the extension:
namespace ExtensionMethodTesting.Extension
{
public static class Extension
{
public static void DoSomething(this ExtensionMethodTesting.Blah.CustomClass r)
{
}
}
}
Here's the Custom Class:
namespace ExtensionMethodTesting.Blah
{
public class CustomClass
{
public static void DoNothing()
{
}
}
}
Here's the code calling it:
using ExtensionMethodTesting.Blah;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using ExtensionMethodTesting.Extension;
namespace ExtensionMethodTesting
{
class Program
{
static void Main(string[] args)
{
CustomClass.DoNothing();
CustomClass.DoSomething();
}
}
}
I must be missing something... Anyways the exact error just for clarification is:
Error 1 'ExtensionMethodTesting.Blah.CustomClass' does not contain a definition for 'DoSomething' c:\users\damon\documents\visual studio 2013\Projects\ExtensionMethodTesting\ExtensionMethodTesting\Program.cs 16 25 ExtensionMethodTesting
Extension methods require an instance of an object. You'll have to new up a CustomClass to use it.
var custom = new CustomClass();
custom.DoSomething();
See this answer as to why that is.
You need to instantiate an object of the CustomClass to use its extension method.
CustomClass obj = new CustomClass();
obj.DoSomething();
Is there any way to call a function that is inside of a namespace without declaring the class inside c#.
For Example, if I had 2 methods that are the exact same and should be used in all of my C# projects, is there any way to just take those functions and make it into a dll and just say 'Using myTwoMethods' on top and start using the methods without declaring the class?
Right now, I do:
MyClass.MyMethod();
I want to do:
MyMethod();
Thanks,
Rohit
Update for 2015:
No you cannot create "free functions" in C#, but starting with C# 6 you'll be able to call static functions without mentioning the class name. C# 6 will have the "using static" feature allowing this syntax:
static class MyClass {
public static void MyMethod();
}
SomeOtherFile.cs:
using static MyClass;
void SomeMethod() {
MyMethod();
}
You can't declare methods outside of a class, but you can do this using a static helper class in a Class Library Project.
public static class HelperClass
{
public static void HelperMethod() {
// ...
}
}
Usage (after adding a reference to your Class Library).
HelperClass.HelperMethod();
Depends on what type of method we are talking, you could look into extension methods:
http://msdn.microsoft.com/en-us/library/bb383977.aspx
This allows you to easily add extra functionality to existing objects.
Following on from the suggestion to use extension methods, you could make the method an extension method off of System.Object, from which all classes derive. I would not advocate this, but pertaining to your question this may be an answer.
namespace SomeNamespace
{
public static class Extensions
{
public static void MyMethod(this System.Object o)
{
// Do something here.
}
}
}
You could now write code like MyMethod(); anywhere you have a using SomeNamespace;, unless you are in a static method (then you would have to do Extensions.MyMethod(null)).
Lets say I have 2 extension methods to string, in 2 different namespaces:
namespace test1
{
public static class MyExtensions
{
public static int TestMethod(this String str)
{
return 1;
}
}
}
namespace test2
{
public static class MyExtensions2
{
public static int TestMethod(this String str)
{
return 2;
}
}
}
These methods are just for example, they don't really do anything.
Now lets consider this piece of code:
using System;
using test1;
using test2;
namespace blah {
public static class Blah {
public Blah() {
string a = "test";
int i = a.TestMethod(); //Which one is chosen ?
}
}
}
The Question:
I know that only one of the extension methods will be chosen.
Which one will it be ? and why ?
Edit:
This also bothers me, but not as much because it's a static method in a static class after all:
How can I choose a certain method from a certain namespace ?
Usually I'd use Namespace.ClassNAME.Method() ... But that just beats the whole idea of extension methods. And I don't think you can use Variable.Namespace.Method()
No method will be chosen: the call is ambiguous and will not compile.
Why can't you do Namespace.ClassNAME.Method()? Certainly there is nothing that prevents you from treating extension methods as normal static methods, and in fact this is the only way for you to fix the ambiguity and have the program compile.
I had this exact question so I found this post two years later. However, I think it is important to note that this will only not compile and give the "The call is ambiguous" error if the code calling the duplicate extension methods is not in the same namespace as one of them.
If the OP were to change the namespace of his class Blah to either test1 or test2, then the code compiles, and the extension in the same namespace as the caller is used - even when both namespaces are represented in the usings. So if Blah is in the test1 namespace, "1" is returned, and if Blah is in the test2 namespace, "2" is returned.
I think this is important to add to the above answers, because I think one mainstream use-case is to have extensions in a local class library that references external extension libraries (e.g. devs share a common utility library, but have some local custom extensions that might unwittingly have the same name). By maintaining the custom local extensions in the same namespace as the code that uses them, you can maintain the extension call syntax and not have to revert to treating them as static method calls.
As Jon says, if both of these exist when you do the compilation, the compilation will just fail.
But if only one exists at the time of compilation and a external library later gets updated to add the second, the code you compiled will still continue to use the first one. This is because the compiler interally turns your code into the longhand form of calling namespace.classname.method.
I migrated big solution from .Net 4.7.1 to .Net 4.7.2. We use LINQ in our code, and we use well known and established library with name MoreLinq https://www.nuget.org/packages/morelinq/.
.Net 4.7.1 does not have .ToHashSet() methods. We used .ToHashSet() from MoreLinq library. And in the same class in the same cs-file we have both using System.Linq; and using MoreLinq;.
I retargeted a project to .Net 4.7.2 and the compiler showed The call is ambiguous error as described above. The reason was that .Net 4.7.2 added new extension methods with the same name .ToHashSet().
I cannot reimplement huge code base. I cannot replace MoreLinq with another library. This is what I did. I created a new class in a new file where I have using System.Linq; but not using MoreLinq;. This is the file (ToHashsetHelpers.cs):
using System.Collections.Generic;
using System.Linq;
namespace Common.Helpers
{
/// <summary>
/// This class with only one method helps to resolve
/// name conflict between .Net 4.7.2 and MoreLinq libraries.
///
/// .Net 4.7.2 introduced a new extension method named '.ToHashSet()'.
/// But MoreLinq already has the same method.
///
/// After migrating our solution from .Net 4.7.1 to 4.7.2
/// C# compiler shows "The call is ambiguous" error.
///
/// We cannot have both "using System.Linq;" and "using MoreLinq;" in the same C# file that
/// uses '.ToHashSet()'.
///
/// The solution is to have method with different name in a file like this.
/// </summary>
public static class ToHashsetHelpers
{
/// <summary>
/// The name of this method is ToHashset (not ToHashSet)
/// </summary>
public static HashSet<TSource> ToHashset<TSource>(this IEnumerable<TSource> source)
{
// Calling System.Linq.Enumerable.ToHashSet()
return source.ToHashSet();
}
}
}
And I renamed all .ToHashSet() to .ToHashset() in entire solution.
I was wondering about the same question and I did a quick test inside an asp.net core 6 project.
If you try this, it does not compile. Pretty much similar as other ambiguous calls or statements not involving extension methods.
using TestExtNs;
using TestExtNs2;
namespace YourBlazorProject.Server
{
public class TestMe
{
public void Test() { }
}
}
namespace TestNs
{
public static class Tester
{
public static void RunTest() // Exec this
{
var x = new YourBlazorProject.Server.TestMe();
x.Test();
x.TestExt(); // does not compile !!! error CS0121
TestExtNs.TesterExt.TestExt(x); //explicit call as working alternative
}
}
}
namespace TestExtNs
{
public static class TesterExt
{
public static void TestExt(this YourBlazorProject.Server.TestMe y)
{
Console.WriteLine("ExtNs");
System.Diagnostics.Debug.WriteLine("#> DIAG: ExtNs");
}
}
}
namespace TestExtNs2
{
public static class TesterExt
{
public static void TestExt(this YourBlazorProject.Server.TestMe y)
{
Console.WriteLine("ExtNs2");
System.Diagnostics.Debug.WriteLine("#> DIAG: ExtNs2");
}
}
}
Alternative: If there is an extension method in the same namespace, this 'closer one' is used; otherwise it won't compile.
// SomeTest.cs (example for 'closer namespace')
using TestExtNs; // This is hard REQUIREMENT for bringing the extension method from TestExtNs into scope !!!
namespace YourBlazorProject.Server
{
public class TestMe
{
public void Test() { }
}
}
namespace TestNs
{
public static class Tester
{
public static void RunTest() // Exec this
{
var x = new YourBlazorProject.Server.TestMe();
x.Test();
x.TestExt(); //Ns
TestExt(x); //Ns
TestExtNs.TesterExt.TestExt(x); //ExtNs
}
public static void TestExt(this YourBlazorProject.Server.TestMe y)
{
Console.WriteLine("Ns"); //writes to the Console Window of the *.Server.exe if its out-of-process hosted. if hosted on IISExp then its visbible in if IISExp is launched from console according to stackoverflow.
System.Diagnostics.Debug.WriteLine("#> DIAG: Ns"); //writes to the VS output console
}
}
}
namespace TestExtNs
{
public static class TesterExt
{
public static void TestExt(this YourBlazorProject.Server.TestMe y)
{
Console.WriteLine("ExtNs");
System.Diagnostics.Debug.WriteLine("#> DIAG: ExtNs");
}
}
}
Output:
Ns
Ns
ExtNs
Why I'm unable to extend an abstract class. Is there any work around to achieve this?
In silverlight, Enum.GetNames is missing. So, I would like to extend it and have it in my utility assembly. By then, got into this.
The problem here is not that you can't add an extension method to an abstract class (you can - you can add an extension method to any type) - it's that you can't add a static method to a type with extension methods.
Extension methods are static methods that present themselves in C# as instance methods. But they're still static. Adding a static method to a type requires the ability to redefine the type, which you can only do if you have the source code :)
Best bet, if you want this method, is to write your own static and see if you can perhaps rip the code out of reflector.
However, it's entirely possible that it's not there because it's physically not supported in Silverlight (I don't know - I haven't investigate)
EDIT
Following on from your comment - and I hope that I've understood you here - I think what you want to be able to do is something like this (targetting object to prove the point):
public static class ExtraObjectStatics
{
public static void NewStaticMethod()
{
}
}
public class Test
{
public void foo()
{
//You can't do this - the static method doesn't reside in the type 'object'
object.NewStaticMethod();
//You can, of course, do this
ExtraObjectStatics.NewStaticMethod();
}
}
If you think about it - of course you can't inject new static methods into an existing type because, like I said in paragraph two, you have to be able to recompile the underlying type; and there simply is no way around that.
What you can do is (and I don't actually recommend this - but it's an option) create yourself a new type called Enum and place it inside a new namespace:
namespace MySystem
{
public class Enum
{
public static string[] GetNames()
{
//don't actually know how you're going to implement it :)
}
}
}
And now - when you want to use it, what you can't do is this:
using System;
using MySystem;
namespace MyCode
{
public class TestClass
{
public static void Test()
{
Enum.GetNames(); //error: ambiguous between System and MySystem
}
}
}
Because the using in the outermost scope to both 'System' and 'MySystem' will cause the compiler not to be able to resolve the correct Enum type.
What you can do, however, is this:
using System;
namespace MyCode
{
using MySystem; //move using to inside the namespace
public class TestClass
{
public static void Test()
{
//will now work, and will target the 'MySystem.Enum.GetNames()'
//method.
Enum.GetNames();
}
}
}
Now, code within that namespace (within that file only) will always resolve Enum to the one in your namespace because that's the nearest using directive in terms of scope.
So, you can think of this as overriding the whole Enum type for the benefit of a given namespace that includes a using MySystem; in it.
But, it does exactly that - it replaces the existing System.Enum with MySystem.Enum - meaning that you lose all the members of the System.Enum type.
You could get around this by writing wrapper methods in your Enum type around the System.Enum versions - making sure that you fully-qualify the type as System.Enum.
Having looked at the implementation of the GetNames method in Reflector - it relies on internal data that I don't think you're going to be able to build... but I would be very interested to hear if you are actually able to reproduce the method in Silverlight.
public abstract class Foo
{
public abstract void Bar();
}
public static class FooExtensions
{
// most useless extension method evar
public static void CallBar(this Foo me)
{
me.Bar();
}
}
Sure, no problem.