I was wondering if there was a way to do something like this in C#:
some loop here
{
Console.WriteLine("Please enter a or b");
switch (Console.ReadLine().ToLower())
{
case "a":
//some code here
break;
case "b":
//some code here
break;
default:
Console.WriteLine("Error, enter a or b");
repeat loop
}
}
It's probably a stupid question but something like that would be greatly beneficial to my assignment.
Why not. Run a while loop that exists only when a or b is entered.
bool condition = false;
Console.WriteLine("Please enter a or b");
string str = string.Empty;
while (!condition)
{
str = Console.ReadLine().ToLower();
switch (str)
{
case "a":
//some code here
condition = true;
break;
case "b":
//some code here
condition = true;
break;
default:
Console.WriteLine("Error, enter a or b");
break;
}
}
Console.WriteLine("You have entered {0} ", str);
Console.ReadLine();
What about something like this?
var acceptedValues = new List<string>()
{
"a",
"b",
};
Console.WriteLine("Please enter {0}", string.Join("or", acceptedValues));
var enteredValue = string.Empty;
do
{
enteredValue = Console.ReadLine().ToLower();
} while (!acceptedValues.Contains(enteredValue));
Related
I'm trying to make a question repeat if the input isn't right. Here's the code:
Console.WriteLine("choose a name");
string userInput = Console.ReadLine();
Boolean input = true;
switch (userInput)
{
case "joe":
Console.WriteLine("you chose a joe");
break;
case "bob":
Console.WriteLine("you chose a bob");
break;
}
How do I make it if it isn't one of the two answers it reasks the question?
Use the default case.
If none of the cases in a switch statement match, the default case runs.
Here's an example.
Console.WriteLine("choose a name");
string userInput = Console.ReadLine();
switch (userInput)
{
case "joe":
// ...
break;
case "bob":
// ...
break;
default:
// This runs if userInput is neither "joe" nor "bob"
}
Then you can make a method that writes choose a name to the console, takes the user's input, and runs the switch statement - and the default case would call the same method.
void GetName()
{
// Write "choose a name" to the console
// Take the user's input
switch (userInput)
{
case "joe":
// ...
break;
case "bob":
// ...
break;
default:
GetName();
return;
}
}
You need a loop (either while or do-while) to repeat the iteration but not a switch-case.
While switch-case is used to control the flag (isCorrectInput) that stops the loop.
bool isCorrectInput = false;
do
{
Console.WriteLine("choose a name");
string userInput = Console.ReadLine();
switch (userInput)
{
case "joe":
Console.WriteLine("you chose a joe");
isCorrectInput = true;
break;
case "bob":
Console.WriteLine("you chose a bob");
isCorrectInput = true;
break;
}
} while (!isCorrectInput);
Reference
Iteration statement
You should use a bool variable, that will determine whether you need to repeat the logic or not. Combine it with a loop and you get this:
bool keepAsking = true;
while (keepAsking)
{
Console.WriteLine("choose a name");
string userInput = Console.ReadLine();
Boolean input = true;
switch (userInput)
{
case "joe":
Console.WriteLine("you chose a joe");
keepAsking = false;
break;
case "bob":
Console.WriteLine("you chose a bob");
keepAsking= false;
break;
}
}
You can try something like this. BUt you need to slightly change your code.
class XYZ
{
static void Main(string[] args)
{
GetData()
}
}
static void GetData()
{
string userInput = Console.ReadLine();
checkcondition(userInput);
}
static void checkcondition(userInput)
{
switch (userInput)
{
case "joe":
Console.WriteLine("you chose a joe");
break;
case "bob":
Console.WriteLine("you chose a bob");
break;
default:
GetData();
break;
}
}
You can also achieve the same results using a smaller code but with a while loop instead of switch statement
while(true){
Console.Write("Choose a Name: ");
var name = Console.ReadLine().ToLower();
if(name == "joe" || name == "bob"){
Console.WriteLine("You chose a " + name + "!");
break;
}else{
Console.WriteLine("Invalid Selection, Try Again");
}
}
Objective: Request users to input yes or no again when they type "idk" until they reply yes or no, how to rerun the ask and ans above?
Requirement: Not to use boolean.
static void Main(string[] args)
{
string ask = "Yes or No?";
Console.WriteLine(ask);
string ans = Console.ReadLine();
switch(ans)
{
case "yes":
yes();
break;
case "no":
no();
break;
case "idk":
//run "ask" again
}
}
Hmmm.. Normally you would use booleans and loop while the boolean is still true and set it to false when you get what you want.
But if you want to avoid booleans you can use an infinite loop and just return out of the function you are in when you are done:
class Program
{
static void Main(string[] args)
{
string ask = "Yes or No?";
for (;;)
{
Console.WriteLine(ask);
string ans = Console.ReadLine();
switch(ans.ToLower())
{
case "yes":
yes();
return;
case "no":
no();
return;
}
}
}
static void yes() => Console.WriteLine("Yes selected");
static void no() => Console.WriteLine("No selected");
}
I will be suggesting you use a do-while loop rather then goto statment
static void Main(string[] args)
{
NotFound:
string ask = "Yes or No?";
Console.WriteLine(ask);
string ans = Console.ReadLine();
switch (ans)
{
case "yes":
yes();
break;
case "no":
no();
break;
case "idk":
goto NotFound;
}
}
private static void no()
{
}
private static void yes()
{
}
switch(exp)
{
case "+":
Console.WriteLine("Enter Yor Number");
int PlusA = Convert.ToInt32(Console.ReadLine());
Console.WriteLine("Enter Yor Number");
int PlusB = Convert.ToInt32(Console.ReadLine());
Console.WriteLine("Answer =");
Console.WriteLine(PlusA + PlusB);
One more question I want to make a plus calculator, I want to let the user type more then 2 numbers, until they type the symbol ; how to do that?
When I'm doing the code without the goto command it works, but when I add the :Start it get an 8 error.
Here is the relevant code:
:Start
Console.Write("Do you want the yes or no?");
string what = Console.ReadLine();
switch (what)
{
case "yes":
Console.WriteLine("You choose yes");
break;
case "no":
Console.WriteLine("You choose no");
break;
default:
Console.WriteLine("{0},is not a word",what);
goto Start;
}
The correct syntax is Start:. But, instead of goto, you should set this up in a loop:
bool invalid = true;
while (invalid)
{
Console.Write("Do you want the yes or no?");
string what = Console.ReadLine();
switch (what)
{
case "yes":
Console.WriteLine("You choose yes");
invalid = false;
break;
case "no":
Console.WriteLine("You choose no");
invalid = false;
break;
default:
Console.WriteLine("{0},is not a word",what);
}
}
Try "Start:" instead of ":Start"
like this:
Start:
Console.Write("Do you want the yes or no?");
string what = Console.ReadLine();
switch (what)
{
case "yes":
Console.WriteLine("You choose yes");
break;
case "no":
Console.WriteLine("You choose no");
break;
default:
Console.WriteLine("{0},is not a word", what);
goto Start;
}
http://msdn.microsoft.com/en-us/library/aa664740(v=vs.71).aspx
The correct syntax for a label is Start:, not :Start
You can refactor your code to omit the goto statement instead (better):
bool continue = true;
while (continue) {
Console.Write("Do you want the yes or no?");
string what = Console.ReadLine();
switch (what)
{
case "yes":
Console.WriteLine("You choose yes");
continue = false;
break;
case "no":
Console.WriteLine("You choose no");
continue = false;
break;
default:
Console.WriteLine("{0}, is not a word",what);
break;
}
}
I'm trying to determine the best way to get the following code to iterate until the user enters a valid number(1-6). As long as the user inputs a number that is greater than 6, the program should continue to prompt the user for a valid number.
static void Main(string[] args)
{
string favoriteBand;
Console.WriteLine("What is your favorite rock band?");
Console.WriteLine("");
Console.WriteLine("1.) Journey");
Console.WriteLine("2.) Boston");
Console.WriteLine("3.) Styx");
Console.WriteLine("4.) Kansas");
Console.WriteLine("5.) Foreigner");
Console.WriteLine("Press 6 to exit the program.");
Console.WriteLine("");
favoriteBand = (Console.ReadLine());
switch (favoriteBand)
{
case "1": Console.WriteLine("Don't Stop Believin'!"); break;
case "2": Console.WriteLine("More Than a Feeling!"); break;
case "3": Console.WriteLine("Come Sail Away!"); break;
case "4": Console.WriteLine("Dust in the Wind!"); break;
case "5": Console.WriteLine("Hot Blooded!"); break;
case "6": return;
default: Console.WriteLine("Error, invalid choice. Please choose a valid number."); break;
}
Console.WriteLine("Press any key to continue.");
Console.ReadKey();
}
How can I get this program to continue prompting for a valid number using a loop?
Just for fun, here we can remove the switch
(not really needed for a simple switch with only 6 cases)
bool isValid = true;
Dictionary<string, Action> command = new Dictionary<string, Action>();
command.Add("1", () => {Console.WriteLine("Don't Stop Believin'!");isValid = false;});
command.Add("2", () => {Console.WriteLine("More Than a Feeling!");isValid = false;});
command.Add("3", () => {Console.WriteLine("Come Sail Away!");isValid = false;});
command.Add("4", () => {Console.WriteLine("Dust in the Wind!");isValid = false;});
command.Add("5", () => {Console.WriteLine("Hot Blooded!");isValid = false;});
command.Add("6", () => isValid = false);
while(isValid)
{
string line = Console.ReadLine();
if(command.Keys.Contains(line))
command[line].Invoke();
else
Console.WriteLine("Choose from 1 to 6");
}
Use a bool variable with while
bool control = true;
while(control)
{
favoriteBand = (Console.ReadLine());
switch (favoriteBand)
{
case "1": Console.WriteLine("Don't Stop Believin'!"); control = false;break;
case "2": Console.WriteLine("More Than a Feeling!");control = false; break;
case "3": Console.WriteLine("Come Sail Away!"); control = false;break;
case "4": Console.WriteLine("Dust in the Wind!"); control = false;break;
case "5": Console.WriteLine("Hot Blooded!"); control = false;break;
case "6": control = false; break;
default: Console.WriteLine("Error, invalid choice. Please choose a valid number."); break;
}
}
I am not understanding what is going on in my case statement to determine if I want to redo the users input. Should I make another loop outside of my while loop? I attempted such and my case statement becomes unreachable code. Maybe I am not understanding case-switch statements.
class Program
{
static void Main(string[] args)
{
string _a = "";
constructor con = new constructor();
Console.WriteLine("Enter enter exit to end the program...");
Console.WriteLine("Enter C for constructor, M for method, A for an array...");
Console.WriteLine("Please reference source code to have full details and understanding...");
bool control = true;
while (control)
{
_a = Console.ReadLine();
switch (_a.ToUpper())
{
case "EXIT":
Console.WriteLine("Thank you for using AJ's program...");
control = false;
break;
case "C":
Console.WriteLine(con.a);
Console.WriteLine("Would you like to test another scenario?");
Console.ReadLine();
if (_a.ToUpper() == "Y")
{
Console.ReadLine();
return;
}
control = false;
break;
case "M":
control = false;
metroid();
break;
case "A":
control = false;
Array();
break;
default: Console.WriteLine("No match");
break;
}
}
}
public class constructor
{
public string a = "This is a constructor!";
}
static public void metroid()
{
string b = "This is a method!";
Console.WriteLine(b);
}
static public void Array()
{
try
{
Console.WriteLine("This is a random array. Please enter the size.");
string sSize = Console.ReadLine();
int arraySize = Convert.ToInt32(sSize);
int[] size = new int[arraySize];
Random rd = new Random();
Console.WriteLine();
for (int i = 0; i < arraySize; i++)
{
size[i] = rd.Next(arraySize);
Console.WriteLine(size[i].ToString());
}
}
catch (System.FormatException)
{
Console.WriteLine("Not correct format, restarting array process.");
Array();
}
}
}
}
Here's what I came up with. You had too many ways of exiting your loop, so I removed all of the control = false lines except where the user typed "EXIT"
Also, in case "C" you return out of the method if they choose "Y", I changed that to continue so that the loop would continue.
Finally, I moved the 3 instruction statements into the loop, so when the user hit "Y" it would print those again.
static void Main(string[] args)
{
string _a = "";
constructor con = new constructor();
bool control = true;
while (control)
{
Console.WriteLine("Enter enter exit to end the program...");
Console.WriteLine("Enter C for constructor, M for method, A for an array...");
Console.WriteLine("Please reference source code to have full details and understanding...");
_a = Console.ReadLine();
switch (_a.ToUpper())
{
case "EXIT":
Console.WriteLine("Thank you for using AJ's program...");
control = false;
break;
case "C":
Console.WriteLine(con.a);
Console.WriteLine("Would you like to test another scenario?");
_a = Console.ReadLine(); //<==problem #1 you didnt set your var name
if (_a.ToUpper() == "Y")
{
continue; //<==problem #2 return exits the program, continue, just keeps going
}
control = false;
break;
case "M":
metroid();
break;
case "A":
Array();
break;
default:
Console.WriteLine("No match");
break;
}
}
}
I think you should considering goto in this case. Yes you need to put some extra effort, but it will help you overcoming the While loop.
A sample below:
switch (_a.ToUpper())
{
case "EXIT":
Console.WriteLine("Thank you for using AJ's program...");
control = false;
// execute goto when your all line executes successfully
goto case "New";
case "New":
// some logic
}
See working sample here Goto-Switch
string NewInput= Console.ReadLine();
if (NewInput.ToUpper() == "Y")
{
//print some thing with console.writeline
//if after this you want to restart the loop then instead of return use
continue;
}
Try putting the Console.Writeline inside the while loop like this:
static void Main(string[] args)
{
bool control = true;
while (control)
{
Console.WriteLine("Enter enter exit to end the program...");
Console.WriteLine("Enter C for constructor, M for method, A for an array...");
Console.WriteLine("Please reference source code to have full details and understanding...");
string _a = Console.ReadLine();
switch (_a.ToUpper())
{
case "EXIT":
Console.WriteLine("Thank you for using AJ's program...");
control = false;
break;
case "C":
Console.WriteLine("press c");
Console.WriteLine("Would you like to test another scenario?");
Console.ReadLine();
if (_a.ToUpper() == "Y")
{
Console.ReadLine();
return;
}
control = false;
break;
case "M":
control = false;
metroid();
break;
case "A":
control = false;
Array();
break;
default: Console.WriteLine("No match");
break;
}
}
}
Additional reading about switch here and here.
Just add comment for the result, thanks. Hope this helped!
may be you want to change
Console.ReadLine();
if (_a.ToUpper() == "Y")
{
Console.ReadLine();
return;
}
as
_a = Console.ReadLine();
if (_a.ToUpper() == "Y")
{
_a = Console.ReadLine();
continue;
}