We Keep Coding

Using C# Lambda to split string and search value

I have a string with the following value:
0:12211,90:33221,23:09011
In each pair, the first value (before the : (colon)) is an employee id, the second value after is a payroll id.
So If I want to get the payroll id for employee id 23 right now I have to do:
var arrayValues=mystring.split(',');
and then for each arrayValues do the same:
var employeeData = arrayValue.split(':');
That way I will get the key and the value.
Is there a way to get the Payroll ID by a given employee id using lambda?
If the employeeId is not in the string then by default it should return the payrollid for employeeid 0 zero.

Using a Linq pipeline and anonymous objects:
"0:12211,90:33221,23:09011"
.Split(',')
.Select(x => x.Split(':'))
.Select(x => new { employeeId = x[0], payrollId = x[1] })
.Where(x=> x.employeeId == "23")
Results in this:
{
employeeId = "23",
payrollId = "09011"
}
These three lines represent your data processing and projection logic:
.Split(',')
.Select(x => x.Split(':'))
.Select(x => new { employeeId = x[0], payrollId = x[1] })
Then you can add any filtering logic with Where after this the second Select

You can try something like that
"0:12211,90:33221,23:09011"
.Split(new char[] { ',' })
.Select(c => {
var pair = c.Split(new char[] { ':' });
return new KeyValuePair<string, string>(pair[0], pair[1]);
})
.ToList();
You have to be aware of validations of data

If I were you, I'd use a dictionary. Especially if you're going to do more than one lookup.
Dictionary<int, int> employeeIDToPayrollID = "0:12211,90:33221,23:09011"
.Split(',') //Split on comma into ["0:12211", "90:33221", "23:09011"]
.Select(x => x.Split(':')) //Split each string on colon into [ ["0", "12211"]... ]
.ToDictionary(int.Parse(x => x[0]), int.Parse(x => x[1]))
and now, you just have to write employeeIDtoPayrollID[0] to get 12211 back. Notice that int.Parse will throw an exception if your IDs aren't integers. You can remove those calls if you want to have a Dictionary<string, string>.

You can use string.Split along with string.Substring.
var result =
str.Split(',')
.Where(s => s.Substring(0,s.IndexOf(":",StringComparison.Ordinal)) == "23")
.Select(s => s.Substring(s.IndexOf(":",StringComparison.Ordinal) + 1))
.FirstOrDefault();
if this logic will be used more than once then I'd put it to a method:
public string GetPayrollIdByEmployeeId(string source, string employeeId){
return source.Split(',')
.Where(s => s.Substring(0, s.IndexOf(":", StringComparison.Ordinal)) == employeeId)
.Select(s => s.Substring(s.IndexOf(":", StringComparison.Ordinal) + 1))
.FirstOrDefault();
}

Assuming you have more than three pairs in the string (how long is that string, anyway?) you can convert it to a Dictionary and use that going forward.
First, split on the comma and then on the colon and put in a Dictionary:
var empInfo = src.Split(',').Select(p => p.Split(':')).ToDictionary(pa => pa[0], pa => pa[1]);
Now, you can write a function to lookup payroll IDs from employee IDs:
string LookupPayrollID(Dictionary<string, string> empInfo, string empID) => empInfo.TryGetValue(empID, out var prID) ? prID : empInfo["0"];
And you can call it to get the answer:
var emp23prid = LookupPayrollID(empInfo, "23");
var emp32prid = LookupPayrollID(empInfo, "32");
If you just have three employees in the string, creating a Dictionary is probably overkill and a simpler answer may be appropriate, such as searching the string.

LINQ Query to find string of multidimensional array with most duplicates

I have written a function that gives me an multidimensional array of an Match with multiple regex strings. (FileCheck[][])
FileCheck[0] // This string[] contains all the filenames
FileCheck[1] // This string[] is 0 or 1 depending on a Regex match is found.
FileCheck[2] // This string[] contains the Index of the first found Regex.
foreach (string File in InputFolder)
{
int j = 0;
FileCheck[0][k] = Path.GetFileName(File);
Console.WriteLine(FileCheck[0][k]);
foreach (Regex Filemask in Filemasks)
{
if (string.IsNullOrEmpty(FileCheck[1][k]) || FileCheck[1][k] == "0")
{
if (Filemask.IsMatch(FileCheck[0][k]))
{
FileCheck[1][k] = "1";
FileCheck[2][k] = j.ToString(); // This is the Index of the Regex thats Valid
}
else
{
FileCheck[1][k] = "0";
}
j++;
}
Console.WriteLine(FileCheck[1][k]);
}
k++;
}
Console.ReadLine();
// I need the Index of the Regex with the most valid hits
I'm trying to write a function that gives me the string of the RegexIndex that has the most duplicates.
This is what I tried but did not work :( (I only get the count of the string the the most duplicates but not the string itself)
// I need the Index of the Regex with the most valid hits
var LINQ = Enumerable.Range(0, FileCheck[0].GetLength(0))
.Where(x => FileCheck[1][x] == "1")
.GroupBy(x => FileCheck[2][x])
.OrderByDescending(x => x.Count())
.First().ToList();
Console.WriteLine(LINQ[1]);
Example Data
string[][] FileCheck = new string[3][];
FileCheck[0] = new string[]{ "1.csv", "TestValid1.txt", "TestValid2.txt", "2.xml", "TestAlsoValid.xml", "TestValid3.txt"};
FileCheck[1] = new string[]{ "0","1","1","0","1","1"};
FileCheck[2] = new string[]{ null, "3", "3", null,"1","2"};
In this example I need as result of the Linq query:
string result = "3";

With your current code, substituting 'ToList()' with 'Key' would do the trick.
var LINQ = Enumerable.Range(0, FileCheck[0].GetLength(0))
.Where(x => FileCheck[1][x] == "1")
.GroupBy(x => FileCheck[2][x])
.OrderByDescending(x => x.Count())
.First().Key;
Since the index is null for values that are not found, you could also filter out null values and skip looking at the FileCheck[1] array. For example:
var maxOccurringIndex = FileCheck[2].Where(ind => ind != null)
.GroupBy(ind=>ind)
.OrderByDescending(x => x.Count())
.First().Key;
However, just a suggestion, you can use classes instead of a nested array, e.g.:
class FileCheckInfo
{
public string File{get;set;}
public bool Match => Index.HasValue;
public int? Index{get;set;}
public override string ToString() => $"{File} [{(Match ? Index.ToString() : "no match")}]";
}
Assuming InputFolder is an enumerable of string and Filemasks an enumerable of 'Regex', an array can be filled with:
FileCheckInfo[] FileCheck = InputFolder.Select(f=>
new FileCheckInfo{
File = f,
Index = Filemasks.Select((rx,ind) => new {ind, IsMatch = rx.IsMatch(f)}).FirstOrDefault(r=>r.IsMatch)?.ind
}).ToArray();
Getting the max occurring would be much the same:
var maxOccurringIndex = FileCheck.Where(f=>f.Match).GroupBy(f=>f.Index).OrderByDescending(gr=>gr.Count()).First().Key;
edit PS, the above is all assuming you need to reuse the results, if you only have to find the maximum occurrence you're much better of with an approach such as Martin suggested!
If the goal is only to get the max occurrence, you can use:
var maxOccurringIndex = Filemasks.Select((rx,ind) => new {ind, Count = InputFolder.Count(f=>rx.IsMatch(f))})
.OrderByDescending(m=>m.Count).FirstOrDefault()?.ind;

Your question and code seems very convoluted. I am guessing that you have a list of file names and another list of file masks (regular expressions) and you want to find the file mask that matches most file names. Here is a way to do that:
var fileNames = new[] { "1.csv", "TestValid1.txt", "TestValid2.txt", "2.xml", "TestAlsoValid.xml", "TestValid3.txt" };
var fileMasks = new[] { #"\.txt$", #"\.xml$", "valid" };
var fileMaskWithMostMatches = fileMasks
.Select(
fileMask => new {
FileMask = fileMask,
FileNamesMatched = fileNames.Count(
fileName => Regex.Match(
fileName,
fileMask,
RegexOptions.IgnoreCase | RegexOptions.CultureInvariant
)
.Success
)
}
)
.OrderByDescending(x => x.FileNamesMatched)
.First()
.FileMask;
With the sample data the value of fileMaskWithMostMatches is valid.
Note that the Regex class will do some caching of regular expressions but if you have many regular expressions it will be more effecient to create the regular expressions outside the implied fileNames.Count for-each loop to avoid recreating the same regular expression again and again (creating a regular expression may take a non-trivial amount of time depending on the complexity).

As an alternative to Martin's answer, here's a simpler version to your existing Linq query that gives the desired result;
var LINQ = FileCheck[2]
.ToLookup(x => x) // Makes a lookup table
.OrderByDescending(x => x.Count()) // Sorts by count, descending
.Select(x => x.Key) // Extract the key
.FirstOrDefault(x => x != null); // Return the first non null key
// or null if none found.

Isn't this much more easier?
string result = FileCheck[2]
.Where(x => x != null)
.GroupBy(x => x)
.OrderByDescending(x => x.Count())
.FirstOrDefault().Key;

Get distinct output from an array

From a string array
string[] str1={"u1-u2","u1-u2","u1-u4","u4-u1"};
string[] str2 = str1.Distinct().ToArray();
Distinct elements in a arry is:"u1-u2","u1-u4","u4-u1"
But i have to get distinct output like this: "u1-u2","u1-u4".
so please help me out

You can do like this:
string[] output = str1.Select(s => new { Value = s, NormalizedValue = string.Join("-", s.Split('-').OrderBy(_ => _)) })
.GroupBy(p => p.NormalizedValue)
.Select(g => g.OrderBy(p => p.Value).First().Value)
.ToArray();

You can convert all values to their normalized form and the call Distinct() on that:
string[] output = str1.Select(string.Join("-", s.Split('-').OrderBy(x => x)))
.Distinct()
.ToArray();
(This is based on the code from Ulugbek Umirov's answer.)

LINQ approach to parse lines with keys/values

I have the following string
MyKey1=MyVal1
MyKey2=MyVal2
MyKey3=MyVal3
MyKey3=MyVal3
So first, in need to split into lines, then I need to split each line by '=' char to get key and value from that line. What I want, as a result, is a List<KeyValuePair<string, string>> (why not a Dictionary? => there may be duplicate keys inside the list), so I can't use the .ToDictionary() extension.
I'm pretty stuck with the following:
List<KeyValuePair<string, string>> fields =
(from lines in Regex.Split(input, #"\r?\n|\r", RegexOptions.None)
where !String.IsNullOrWhiteSpace(lines)
.Select(x => x.Split(new [] { '='}, 2, StringSplitOptions.RemoveEmptyEntries))
.ToList()
--> select new KeyValuePair? Or with 'let' for splitting by '='?
what about exception handling (e.g. ignoring empty values)

If you're concerned about duplicate keys, you could use an ILookup instead:
var fields =
(from line in Regex.Split(input, #"\r?\n|\r", RegexOptions.None)
select line.Split(new [] { '=' }, 2))
.ToLookup(x => x[0], x => x[1]);
var items = fields["MyKey3"]; // [ "MyVal3", "MyVal3" ]

You could use a Lookup<TKey, TValue> instead of a dictionary:
var keyValLookup = text.Split(new[] { Environment.NewLine }, StringSplitOptions.RemoveEmptyEntries)
.Select(l =>
{
var keyVal = l.Split('=');
return new { Key = keyVal[0].Trim(), Value = keyVal.ElementAtOrDefault(1) };
})
.Where(x => x.Key.Length > 0) // not required, just to show how to handle invalid data
.ToLookup(x => x.Key, x => x.Value);
IEnumerable<string> values = keyValLookup["MyKey3"];
Console.Write(string.Join(", ",values)); // MyVal3, MyVal3
A lookup always returns a value even if the key is not present. Then it's an empty sequence. The key must not be unique, so you don't need to group by or remove duplicates before you use ToLookup.

You're pretty close (I changed your example to all method syntax for consistency):
List<KeyValuePair<string, string>> fields =
Regex.Split(input, #"\r?\n|\r", RegexOptions.None)
.Where(s => !String.IsNullOrWhiteSpace(s))
.Select(x => x.Split(new [] {'='}, 2, StringSplitOptions.RemoveEmptyEntries)
.Where(p => p.Length == 2) // to avoid IndexOutOfRangeException
.Select(p => new KeyValuePair(p[0], p[1]));
Although I agree with Jon's comment that a grouping would be cleaner if you have duplicate keys:
IEnumerable<IGrouping<string, string>> fields =
Regex.Split(input, #"\r?\n|\r", RegexOptions.None)
.Where(s => !String.IsNullOrWhiteSpace(s))
.Select(x => x.Split(new [] {'='}, 2, StringSplitOptions.RemoveEmptyEntries))
.GroupBy(p => p[0]);

I suggest you try matching the Key/Value instead of splitting. If you want a dictionary with multiple values for a key, you could use ToLookup (an ILookup):
var result = Regex.Matches(input, #"(?<key>[^=\r\n]+)=(?<value>[^=\r\n]+)")
.OfType<Match>()
.ToLookup(m => m.Groups["key"].Value,
m => m.Groups["value"].Value);
If you need to add to that list later on or want to keep using a list:
var result = Regex.Matches(input, #"(?<key>[^=\r\n]+)=(?<value>[^=\r\n]+)")
.OfType<Match>()
.Select(m => new KeyValuePair<string, string>(m.Groups["key"].Value, m.Groups["value"].Value))
.ToList();
Note: the Regex used might not be suited for your uses as we don't know the inputs you might have.

IEnumerable<string> to Dictionary<char, IEnumerable<string>>

I suppose that this question might partially duplicate other similar questions, but i'm having troubles with such a situation:
I want to extract from some string sentences
For example from
`string sentence = "We can store these chars in separate variables. We can also test against other string characters.";`
I want to build an IEnumerable words;
var separators = new[] {',', ' ', '.'};
IEnumerable<string> words = sentence.Split(separators, StringSplitOptions.RemoveEmptyEntries);
After that, go throught all these words and take firs character into a distinct ascending ordered collection of characters.
var firstChars = words.Select(x => x.ToCharArray().First()).OrderBy(x => x).Distinct();
After that, go through both collections and for each character in firstChars get all items from words which has the first character equal with current character and create a Dictionary<char, IEnumerable<string>> dictionary.
I'm doing this way:
var dictionary = (from k in firstChars
from v in words
where v.ToCharArray().First().Equals(k)
select new { k, v })
.ToDictionary(x => x);
and here is the problem: An item with the same key has already been added.
Whis is because into that dictionary It is going to add an existing character.
I included a GroupBy extension into my query
var dictionary = (from k in firstChars
from v in words
where v.ToCharArray().First().Equals(k)
select new { k, v })
.GroupBy(x => x)
.ToDictionary(x => x);
The solution above gives makes all OK, but it gives me other type than I need.
What I should do to get as result an Dictionary<char, IEnumerable<string>>dictionary but not Dictionary<IGouping<'a,'a>> ?
The result which I want is as in the bellow image:
But here I have to iterate with 2 foreach(s) which will Show me wat i want... I cannot understand well how this happens ...
Any suggestion and advice will be welcome. Thank you.

As the relation is one to many, you can use a lookup instead of a dictionary:
var lookup = words.ToLookup(word => word[0]);
loopkup['s'] -> store, separate... as an IEnumerable<string>
And if you want to display the key/values sorted by first char:
for (var sortedEntry in lookup.OrderBy(entry => entry.Key))
{
Console.WriteLine(string.Format("First letter: {0}", sortedEntry.Key);
foreach (string word in sortedEntry)
{
Console.WriteLine(word);
}
}

You can do this:
var words = ...
var dictionary = words.GroupBy(w => w[0])
.ToDictionary(g => g.Key, g => g.AsEnumerable());
But for matter, why not use an ILookup?
var lookup = words.ToLookup(w => w[0]);