When should I use an interface and when should I use a base class?
Should it always be an interface if I don't want to actually define a base implementation of the methods?
If I have a Dog and Cat class. Why would I want to implement IPet instead of PetBase? I can understand having interfaces for ISheds or IBarks (IMakesNoise?), because those can be placed on a pet by pet basis, but I don't understand which to use for a generic Pet.
Let's take your example of a Dog and a Cat class, and let's illustrate using C#:
Both a dog and a cat are animals, specifically, quadruped mammals (animals are waaay too general). Let us assume that you have an abstract class Mammal, for both of them:
public abstract class Mammal
This base class will probably have default methods such as:
Feed
Mate
All of which are behavior that have more or less the same implementation between either species. To define this you will have:
public class Dog : Mammal
public class Cat : Mammal
Now let's suppose there are other mammals, which we will usually see in a zoo:
public class Giraffe : Mammal
public class Rhinoceros : Mammal
public class Hippopotamus : Mammal
This will still be valid because at the core of the functionality Feed() and Mate() will still be the same.
However, giraffes, rhinoceros, and hippos are not exactly animals that you can make pets out of. That's where an interface will be useful:
public interface IPettable
{
IList<Trick> Tricks{get; set;}
void Bathe();
void Train(Trick t);
}
The implementation for the above contract will not be the same between a cat and dog; putting their implementations in an abstract class to inherit will be a bad idea.
Your Dog and Cat definitions should now look like:
public class Dog : Mammal, IPettable
public class Cat : Mammal, IPettable
Theoretically you can override them from a higher base class, but essentially an interface allows you to add on only the things you need into a class without the need for inheritance.
Consequently, because you can usually only inherit from one abstract class (in most statically typed OO languages that is... exceptions include C++) but be able to implement multiple interfaces, it allows you to construct objects in a strictly as required basis.
Well, Josh Bloch said himself in Effective Java 2d:
Prefer interfaces over abstract classes
Some main points:
Existing classes can be easily retrofitted to implement a new
interface. All you have to do is add
the required methods if they don’t yet
exist and add an implements clause to
the class declaration.
Interfaces are ideal for defining mixins. Loosely speaking, a
mixin is a type that a class can
implement in addition to its “primary
type” to declare that it provides
some optional behavior. For example,
Comparable is a mixin interface that
allows a class to declare that its
instances are ordered with respect to
other mutually comparable objects.
Interfaces allow the construction of nonhierarchical type
frameworks. Type hierarchies are
great for organizing some things, but
other things don’t fall neatly into a
rigid hierarchy.
Interfaces enable safe, powerful functionality enhancements via the
wrap- per class idiom. If you use
abstract classes to define types, you
leave the programmer who wants to add
functionality with no alternative but
to use inheritance.
Moreover, you can combine the virtues
of interfaces and abstract classes by
providing an abstract skeletal
implementation class to go with each
nontrivial interface that you export.
On the other hand, interfaces are very hard to evolve. If you add a method to an interface it'll break all of it's implementations.
PS.: Buy the book. It's a lot more detailed.
Interfaces and base classes represent two different forms of relationships.
Inheritance (base classes) represent an "is-a" relationship. E.g. a dog or a cat "is-a" pet. This relationship always represents the (single) purpose of the class (in conjunction with the "single responsibility principle").
Interfaces, on the other hand, represent additional features of a class. I'd call it an "is" relationship, like in "Foo is disposable", hence the IDisposable interface in C#.
Modern style is to define IPet and PetBase.
The advantage of the interface is that other code can use it without any ties whatsoever to other executable code. Completely "clean." Also interfaces can be mixed.
But base classes are useful for simple implementations and common utilities. So provide an abstract base class as well to save time and code.
Interfaces
Most languages allow you to implement multiple interfaces
Modifying an interface is a breaking change. All implementations need to be recompiled/modified.
All members are public. Implementations have to implement all members.
Interfaces help in Decoupling. You can use mock frameworks to mock out anything behind an interface
Interfaces normally indicate a kind of behavior
Interface implementations are decoupled / isolated from each other
Base classes
Allows you to add some default implementation that you get for free by derivation (From C# 8.0 by interface you can have default implementation)
Except C++, you can only derive from one class. Even if could from multiple classes, it is usually a bad idea.
Changing the base class is relatively easy. Derivations do not need to do anything special
Base classes can declare protected and public functions that can be accessed by derivations
Abstract Base classes can't be mocked easily like interfaces
Base classes normally indicate type hierarchy (IS A)
Class derivations may come to depend on some base behavior (have intricate knowledge of parent implementation). Things can be messy if you make a change to the base implementation for one guy and break the others.
In general, you should favor interfaces over abstract classes. One reason to use an abstract class is if you have common implementation among concrete classes. Of course, you should still declare an interface (IPet) and have an abstract class (PetBase) implement that interface.Using small, distinct interfaces, you can use multiples to further improve flexibility. Interfaces allow the maximum amount of flexibility and portability of types across boundaries. When passing references across boundaries, always pass the interface and not the concrete type. This allows the receiving end to determine concrete implementation and provides maximum flexibility. This is absolutely true when programming in a TDD/BDD fashion.
The Gang of Four stated in their book "Because inheritance exposes a subclass to details of its parent's implementation, it's often said that 'inheritance breaks encapsulation". I believe this to be true.
This is pretty .NET specific, but the Framework Design Guidelines book argues that in general classes give more flexibility in an evolving framework. Once an interface is shipped, you don't get the chance to change it without breaking code that used that interface. With a class however, you can modify it and not break code that links to it. As long you make the right modifications, which includes adding new functionality, you will be able to extend and evolve your code.
Krzysztof Cwalina says on page 81:
Over the course of the three versions of the .NET Framework, I have talked about this guideline with quite a few developers on our team. Many of them, including those who initially disagreed with the guidelines, have said that they regret having shipped some API as an interface. I have not heard of even one case in which somebody regretted that they shipped a class.
That being said there certainly is a place for interfaces. As a general guideline always provide an abstract base class implementation of an interface if for nothing else as an example of a way to implement the interface. In the best case that base class will save a lot of work.
Juan,
I like to think of interfaces as a way to characterize a class. A particular dog breed class, say a YorkshireTerrier, may be a descended of the parent dog class, but it is also implements IFurry, IStubby, and IYippieDog. So the class defines what the class is but the interface tells us things about it.
The advantage of this is it allows me to, for example, gather all the IYippieDog's and throw them into my Ocean collection. So now I can reach across a particular set of objects and find ones that meet the criteria I am looking at without inspecting the class too closely.
I find that interfaces really should define a sub-set of the public behavior of a class. If it defines all the public behavior for all the classes that implement then it usually does not need to exist. They do not tell me anything useful.
This thought though goes counter to the idea that every class should have an interface and you should code to the interface. That's fine, but you end up with a lot of one to one interfaces to classes and it makes things confusing. I understand that the idea is it does not really cost anything to do and now you can swap things in and out with ease. However, I find that I rarely do that. Most of the time I am just modifying the existing class in place and have the exact same issues I always did if the public interface of that class needs changing, except I now have to change it in two places.
So if you think like me you would definitely say that Cat and Dog are IPettable. It is a characterization that matches them both.
The other piece of this though is should they have the same base class? The question is do they need to be broadly treated as the same thing. Certainly they are both Animals, but does that fit how we are going to use them together.
Say I want to gather all Animal classes and put them in my Ark container.
Or do they need to be Mammals? Perhaps we need some kind of cross animal milking factory?
Do they even need to be linked together at all? Is it enough to just know they are both IPettable?
I often feel the desire to derive a whole class hierarchy when I really just need one class. I do it in anticipation someday I might need it and usually I never do. Even when I do, I usually find I have to do a lot to fix it. That’s because the first class I am creating is not the Dog, I am not that lucky, it is instead the Platypus. Now my entire class hierarchy is based on the bizarre case and I have a lot of wasted code.
You might also find at some point that not all Cats are IPettable (like that hairless one). Now you can move that Interface to all the derivative classes that fit. You will find that a much less breaking change that all of a sudden Cats are no longer derived from PettableBase.
Here is the basic and simple definiton of interface and base class:
Base class = object inheritance.
Interface = functional inheritance.
cheers
It is explained well in this Java World article.
Personally, I tend to use interfaces to define interfaces - i.e. parts of the system design that specify how something should be accessed.
It's not uncommon that I will have a class implementing one or more interfaces.
Abstract classes I use as a basis for something else.
The following is an extract from the above mentioned article JavaWorld.com article, author Tony Sintes, 04/20/01
Interface vs. abstract class
Choosing interfaces and abstract classes is not an either/or proposition. If you need to change your design, make it an interface. However, you may have abstract classes that provide some default behavior. Abstract classes are excellent candidates inside of application frameworks.
Abstract classes let you define some behaviors; they force your subclasses to provide others. For example, if you have an application framework, an abstract class may provide default services such as event and message handling. Those services allow your application to plug in to your application framework. However, there is some application-specific functionality that only your application can perform. Such functionality might include startup and shutdown tasks, which are often application-dependent. So instead of trying to define that behavior itself, the abstract base class can declare abstract shutdown and startup methods. The base class knows that it needs those methods, but an abstract class lets your class admit that it doesn't know how to perform those actions; it only knows that it must initiate the actions. When it is time to start up, the abstract class can call the startup method. When the base class calls this method, Java calls the method defined by the child class.
Many developers forget that a class that defines an abstract method can call that method as well. Abstract classes are an excellent way to create planned inheritance hierarchies. They're also a good choice for nonleaf classes in class hierarchies.
Class vs. interface
Some say you should define all classes in terms of interfaces, but I think recommendation seems a bit extreme. I use interfaces when I see that something in my design will change frequently.
For example, the Strategy pattern lets you swap new algorithms and processes into your program without altering the objects that use them. A media player might know how to play CDs, MP3s, and wav files. Of course, you don't want to hardcode those playback algorithms into the player; that will make it difficult to add a new format like AVI. Furthermore, your code will be littered with useless case statements. And to add insult to injury, you will need to update those case statements each time you add a new algorithm. All in all, this is not a very object-oriented way to program.
With the Strategy pattern, you can simply encapsulate the algorithm behind an object. If you do that, you can provide new media plug-ins at any time. Let's call the plug-in class MediaStrategy. That object would have one method: playStream(Stream s). So to add a new algorithm, we simply extend our algorithm class. Now, when the program encounters the new media type, it simply delegates the playing of the stream to our media strategy. Of course, you'll need some plumbing to properly instantiate the algorithm strategies you will need.
This is an excellent place to use an interface. We've used the Strategy pattern, which clearly indicates a place in the design that will change. Thus, you should define the strategy as an interface. You should generally favor interfaces over inheritance when you want an object to have a certain type; in this case, MediaStrategy. Relying on inheritance for type identity is dangerous; it locks you into a particular inheritance hierarchy. Java doesn't allow multiple inheritance, so you can't extend something that gives you a useful implementation or more type identity.
I recommend using composition instead of inheritence whenever possible. Use interfaces but use member objects for base implementation. That way, you can define a factory that constructs your objects to behave in a certain way. If you want to change the behavior then you make a new factory method (or abstract factory) that creates different types of sub-objects.
In some cases, you may find that your primary objects don't need interfaces at all, if all of the mutable behavior is defined in helper objects.
So instead of IPet or PetBase, you might end up with a Pet which has an IFurBehavior parameter. The IFurBehavior parameter is set by the CreateDog() method of the PetFactory. It is this parameter which is called for the shed() method.
If you do this you'll find your code is much more flexible and most of your simple objects deal with very basic system-wide behaviors.
I recommend this pattern even in multiple-inheritence languages.
Also keep in mind not to get swept away in OO (see blog) and always model objects based on behavior required, if you were designing an app where the only behavior you required was a generic name and species for an animal then you would only need one class Animal with a property for the name, instead of millions of classes for every possible animal in the world.
I have a rough rule-of-thumb
Functionality: likely to be different in all parts: Interface.
Data, and functionality, parts will be mostly the same, parts different: abstract class.
Data, and functionality, actually working, if extended only with slight changes: ordinary (concrete) class
Data and functionality, no changes planned: ordinary (concrete) class with final modifier.
Data, and maybe functionality: read-only: enum members.
This is very rough and ready and not at all strictly defined, but there is a spectrum from interfaces where everything is intended to be changed to enums where everything is fixed a bit like a read-only file.
Source: http://jasonroell.com/2014/12/09/interfaces-vs-abstract-classes-what-should-you-use/
C# is a wonderful language that has matured and evolved over the last 14 years. This is great for us developers because a mature language provides us with a plethora of language features that are at our disposal.
However, with much power becomes much responsibility. Some of these features can be misused, or sometimes it is hard to understand why you would choose to use one feature over another. Over the years, a feature that I have seen many developers struggle with is when to choose to use an interface or to choose to use an abstract class. Both have there advantages and disadvantages and the correct time and place to use each. But how to we decide???
Both provide for reuse of common functionality between types. The most obvious difference right away is that interfaces provide no implementation for their functionality whereas abstract classes allow you to implement some “base” or “default” behavior and then have the ability to “override” this default behavior with the classes derived types if necessary.
This is all well and good and provides for great reuse of code and adheres to the DRY (Don’t Repeat Yourself) principle of software development. Abstract classes are great to use when you have an “is a” relationship.
For example: A golden retriever “is a” type of dog. So is a poodle. They both can bark, as all dogs can. However, you might want to state that the poodle park is significantly different than the “default” dog bark. Therefor, it could make sense for you to implement something as follows:
public abstract class Dog
{
public virtual void Bark()
{
Console.WriteLine("Base Class implementation of Bark");
}
}
public class GoldenRetriever : Dog
{
// the Bark method is inherited from the Dog class
}
public class Poodle : Dog
{
// here we are overriding the base functionality of Bark with our new implementation
// specific to the Poodle class
public override void Bark()
{
Console.WriteLine("Poodle's implementation of Bark");
}
}
// Add a list of dogs to a collection and call the bark method.
void Main()
{
var poodle = new Poodle();
var goldenRetriever = new GoldenRetriever();
var dogs = new List<Dog>();
dogs.Add(poodle);
dogs.Add(goldenRetriever);
foreach (var dog in dogs)
{
dog.Bark();
}
}
// Output will be:
// Poodle's implementation of Bark
// Base Class implementation of Bark
//
As you can see, this would be a great way to keep your code DRY and allow for the base class implementation be called when any of the types can just rely on the default Bark instead of a special case implementation. The classes like GoldenRetriever, Boxer, Lab could all could inherit the “default” (bass class) Bark at no charge just because they implement the Dog abstract class.
But I’m sure you already knew that.
You are here because you want to understand why you might want to choose an interface over an abstract class or vice versa. Well one reason you may want to choose an interface over an abstract class is when you don’t have or want to prevent a default implementation. This is usually because the types that are implementing the interface not related in an “is a” relationship. Actually, they don’t have to be related at all except for the fact that each type “is able” or has “the ablity” to do something or have something.
Now what the heck does that mean? Well, for example: A human is not a duck…and a duck is not a human. Pretty obvious. However, both a duck and a human have “the ability” to swim (given that the human passed his swimming lessons in 1st grade :) ). Also, since a duck is not a human or vice versa, this is not an “is a” realationship, but instead an “is able” relationship and we can use an interface to illustrate that:
// Create ISwimable interface
public interface ISwimable
{
public void Swim();
}
// Have Human implement ISwimable Interface
public class Human : ISwimable
public void Swim()
{
//Human's implementation of Swim
Console.WriteLine("I'm a human swimming!");
}
// Have Duck implement ISwimable interface
public class Duck: ISwimable
{
public void Swim()
{
// Duck's implementation of Swim
Console.WriteLine("Quack! Quack! I'm a Duck swimming!")
}
}
//Now they can both be used in places where you just need an object that has the ability "to swim"
public void ShowHowYouSwim(ISwimable somethingThatCanSwim)
{
somethingThatCanSwim.Swim();
}
public void Main()
{
var human = new Human();
var duck = new Duck();
var listOfThingsThatCanSwim = new List<ISwimable>();
listOfThingsThatCanSwim.Add(duck);
listOfThingsThatCanSwim.Add(human);
foreach (var something in listOfThingsThatCanSwim)
{
ShowHowYouSwim(something);
}
}
// So at runtime the correct implementation of something.Swim() will be called
// Output:
// Quack! Quack! I'm a Duck swimming!
// I'm a human swimming!
Using interfaces like the code above will allow you to pass an object into a method that “is able” to do something. The code doesn’t care how it does it…All it knows is that it can call the Swim method on that object and that object will know which behavior take at run-time based on its type.
Once again, this helps your code stay DRY so that you would not have to write multiple methods that are calling the object to preform the same core function (ShowHowHumanSwims(human), ShowHowDuckSwims(duck), etc.)
Using an interface here allows the calling methods to not have to worry about what type is which or how the behavior is implemented. It just knows that given the interface, each object will have to have implemented the Swim method so it is safe to call it in its own code and allow the behavior of the Swim method be handled within its own class.
Summary:
So my main rule of thumb is use an abstract class when you want to implement a “default” functionality for a class hierarchy or/and the classes or types you are working with share a “is a” relationship (ex. poodle “is a” type of dog).
On the other hand use an interface when you do not have an “is a” relationship but have types that share “the ability” to do something or have something (ex. Duck “is not” a human. However, duck and human share “the ability” to swim).
Another difference to note between abstract classes and interfaces is that a class can implement one to many interfaces but a class can only inherit from ONE abstract class (or any class for that matter). Yes, you can nest classes and have an inheritance hierarchy (which many programs do and should have) but you cannot inherit two classes in one derived class definition (this rule applies to C#. In some other languages you are able to do this, usually only because of the lack of interfaces in these languages).
Also remember when using interfaces to adhere to the Interface Segregation Principle (ISP). ISP states that no client should be forced to depend on methods it does not use. For this reason interfaces should be focused on specific tasks and are usually very small (ex. IDisposable, IComparable ).
Another tip is if you are developing small, concise bits of functionality, use interfaces. If you are designing large functional units, use an abstract class.
Hope this clears things up for some people!
Also if you can think of any better examples or want to point something out, please do so in the comments below!
Interfaces should be small. Really small. If you're really breaking down your objects, then your interfaces will probably only contain a few very specific methods and properties.
Abstract classes are shortcuts. Are there things that all derivatives of PetBase share that you can code once and be done with? If yes, then it's time for an abstract class.
Abstract classes are also limiting. While they give you a great shortcut to producing child objects, any given object can only implement one abstract class. Many times, I find this a limitation of Abstract classes, and this is why I use lots of interfaces.
Abstract classes may contain several interfaces. Your PetBase abstract class may implement IPet (pets have owners) and IDigestion (pets eat, or at least they should). However, PetBase will probably not implement IMammal, since not all pets are mammals and not all mammals are pets. You may add a MammalPetBase that extends PetBase and add IMammal. FishBase could have PetBase and add IFish. IFish would have ISwim and IUnderwaterBreather as interfaces.
Yes, my example is extensively over-complicated for the simple example, but that's part of the great thing about how interfaces and abstract classes work together.
The case for Base Classes over Interfaces was explained well in the Submain .NET Coding Guidelines:
Base Classes vs. Interfaces
An interface type is a partial
description of a value, potentially
supported by many object types. Use
base classes instead of interfaces
whenever possible. From a versioning
perspective, classes are more flexible
than interfaces. With a class, you can
ship Version 1.0 and then in Version
2.0 add a new method to the class. As long as the method is not abstract,
any existing derived classes continue
to function unchanged.
Because interfaces do not support
implementation inheritance, the
pattern that applies to classes does
not apply to interfaces. Adding a
method to an interface is equivalent
to adding an abstract method to a base
class; any class that implements the
interface will break because the class
does not implement the new method.
Interfaces are appropriate in the
following situations:
Several unrelated classes want to support the protocol.
These classes already have established base classes (for
example,
some are user interface (UI) controls,
and some are XML Web services).
Aggregation is not appropriate or practicable. In all other
situations,
class inheritance is a better model.
One important difference is that you can only inherit one base class, but you can implement many interfaces. So you only want to use a base class if you are absolutely certain that you won't need to also inherit a different base class. Additionally, if you find your interface is getting large then you should start looking to break it up into a few logical pieces that define independent functionality, since there's no rule that your class can't implement them all (or that you can define a different interface that just inherits them all to group them).
When I first started learning about object-oriented programming, I made the easy and probably common mistake of using inheritance to share common behavior - even where that behavior was not essential to the nature of the object.
To further build on an example much used in this particular question, there are lots of things that are petable - girlfriends, cars, fuzzy blankets... - so I might have had a Petable class that provided this common behavior, and various classes inheriting from it.
However, being petable is not part of the nature of any of these objects. There are vastly more important concepts that are essential to their nature - the girlfriend is a person, the car is a land vehicle, the cat is a mammal...
Behaviors should be assigned first to interfaces (including the default interface of the class), and promoted to a base class only if they are (a) common to a large group of classes that are subsets of a larger class - in the same sense that "cat" and "person" are subsets of "mammal".
The catch is, after you understand object-oriented design sufficiently better than I did at first, you'll normally do this automatically without even thinking about it. So the bare truth of the statement "code to an interface, not an abstract class" becomes so obvious you have a hard time believing anyone would bother to say it - and start trying to read other meanings into it.
Another thing I'd add is that if a class is purely abstract - with no non-abstract, non-inherited members or methods exposed to child, parent, or client - then why is it a class? It could be replaced, in some cases by an interface and in other cases by Null.
Prefer interfaces over abstract classes
Rationale,
the main points to consider [two already mentioned here] are :
Interfaces are more flexible, because a class can implement multiple
interfaces. Since Java does not have multiple inheritance, using
abstract classes prevents your users from using any other class
hierarchy. In general, prefer interfaces when there are no default
implementations or state. Java collections offer good examples of
this (Map, Set, etc.).
Abstract classes have the advantage of allowing better forward
compatibility. Once clients use an interface, you cannot change it;
if they use an abstract class, you can still add behavior without
breaking existing code. If compatibility is a concern, consider using
abstract classes.
Even if you do have default implementations or internal state,
consider offering an interface and an abstract implementation of it.
This will assist clients, but still allow them greater freedom if
desired [1].
Of course, the subject has been discussed at length
elsewhere [2,3].
[1] It adds more code, of course, but if brevity is your primary concern, you probably should have avoided Java in the first place!
[2] Joshua Bloch, Effective Java, items 16-18.
[3] http://www.codeproject.com/KB/ar...
Previous comments about using abstract classes for common implementation is definitely on the mark. One benefit I haven't seen mentioned yet is that the use of interfaces makes it much easier to implement mock objects for the purpose of unit testing. Defining IPet and PetBase as Jason Cohen described enables you to mock different data conditions easily, without the overhead of a physical database (until you decide it's time to test the real thing).
Don't use a base class unless you know what it means, and that it applies in this case. If it applies, use it, otherwise, use interfaces. But note the answer about small interfaces.
Public Inheritance is overused in OOD and expresses a lot more than most developers realize or are willing to live up to. See the Liskov Substitutablity Principle
In short, if A "is a" B then A requires no more than B and delivers no less than B, for every method it exposes.
Another option to keep in mind is using the "has-a" relationship, aka "is implemented in terms of" or "composition." Sometimes this is a cleaner, more flexible way to structure things than using "is-a" inheritance.
It may not make as much sense logically to say that Dog and Cat both "have" a Pet, but it avoids common multiple inheritance pitfalls:
public class Pet
{
void Bathe();
void Train(Trick t);
}
public class Dog
{
private Pet pet;
public void Bathe() { pet.Bathe(); }
public void Train(Trick t) { pet.Train(t); }
}
public class Cat
{
private Pet pet;
public void Bathe() { pet.Bathe(); }
public void Train(Trick t) { pet.Train(t); }
}
Yes, this example shows that there is a lot of code duplication and lack of elegance involved in doing things this way. But one should also appreciate that this helps to keep Dog and Cat decoupled from the Pet class (in that Dog and Cat do not have access to the private members of Pet), and it leaves room for Dog and Cat to inherit from something else--possibly the Mammal class.
Composition is preferable when no private access is required and you don't need to refer to Dog and Cat using generic Pet references/pointers. Interfaces give you that generic reference capability and can help cut down on the verbosity of your code, but they can also obfuscate things when they are poorly organized. Inheritance is useful when you need private member access, and in using it you are committing yourself to highly coupling your Dog and Cat classes to your Pet class, which is a steep cost to pay.
Between inheritance, composition, and interfaces there is no one way that is always right, and it helps to consider how all three options can be used in harmony. Of the three, inheritance is typically the option that should be used the least often.
Conceptually, an interface is used to formally and semi-formally define a set of methods that an object will provide. Formally means a set of method names and signatures, and semi-formally means human readable documentation associated with those methods.
Interfaces are only descriptions of an API (after all, API stands for application programming interface), they can't contain any implementation, and it's not possible to use or run an interface. They only make explicit the contract of how you should interact with an object.
Classes provide an implementation, and they can declare that they implement zero, one or more Interfaces. If a class is intended to be inherited, the convention is to prefix the class name with "Base".
There is a distinction between a base class and an abstract base classes (ABC). ABCs mix interface and implementation together. Abstract outside of computer programming means "summary", that is "abstract == interface". An abstract base class can then describe both an interface, as well as an empty, partial or complete implementation that is intended to be inherited.
Opinions on when to use interfaces versus abstract base classes versus just classes is going to vary wildly based on both what you are developing, and which language you are developing in. Interfaces are often associated only with statically typed languages such as Java or C#, but dynamically typed languages can also have interfaces and abstract base classes. In Python for example, the distinction is made clear between a Class, which declares that it implements an interface, and an object, which is an instance of a class, and is said to provide that interface. It's possible in a dynamic language that two objects that are both instances of the same class, can declare that they provide completely different interfaces. In Python this is only possible for object attributes, while methods are shared state between all objects of a class. However, in Ruby, objects can have per-instance methods, so it's possible that the interface between two objects of the same class can vary as much as the programmer desires (however, Ruby doesn't have any explicit way of declaring Interfaces).
In dynamic languages the interface to an object is often implicitly assumed, either by introspecting an object and asking it what methods it provides (look before you leap) or preferably by simply attempting to use the desired interface on an object and catching exceptions if the object doesn't provide that interface (easier to ask forgiveness than permission). This can lead to "false positives" where two interfaces have the same method name, but are semantically different. However, the trade-off is that your code is more flexible since you don't need to over specify up-front to anticipate all possible uses of your code.
It depends on your requirements. If IPet is simple enough, I would prefer to implement that. Otherwise, if PetBase implements a ton of functionality you don't want to duplicate, then have at it.
The downside to implementing a base class is the requirement to override (or new) existing methods. This makes them virtual methods which means you have to be careful about how you use the object instance.
Lastly, the single inheritance of .NET kills me. A naive example: Say you're making a user control, so you inherit UserControl. But, now you're locked out of also inheriting PetBase. This forces you to reorganize, such as to make a PetBase class member, instead.
I usually don't implement either until I need one. I favor interfaces over abstract classes because that gives a little more flexibility. If there's common behavior in some of the inheriting classes I move that up and make an abstract base class. I don't see the need for both, since they essentially server the same purpose, and having both is a bad code smell (imho) that the solution has been over-engineered.
Regarding C#, in some senses interfaces and abstract classes can be interchangeable. However, the differences are: i) interfaces cannot implement code; ii) because of this, interfaces cannot call further up the stack to subclass; and iii) only can abstract class may be inherited on a class, whereas multiple interfaces may be implemented on a class.
By def, interface provides a layer to communicate with other code. All the public properties and methods of a class are by default implementing implicit interface. We can also define an interface as a role, when ever any class needs to play that role, it has to implement it giving it different forms of implementation depending on the class implementing it. Hence when you talk about interface, you are talking about polymorphism and when you are talking about base class, you are talking about inheritance. Two concepts of oops !!!
I've found that a pattern of Interface > Abstract > Concrete works in the following use-case:
1. You have a general interface (eg IPet)
2. You have a implementation that is less general (eg Mammal)
3. You have many concrete members (eg Cat, Dog, Ape)
The abstract class defines default shared attributes of the concrete classes, yet enforces the interface. For example:
public interface IPet{
public boolean hasHair();
public boolean walksUprights();
public boolean hasNipples();
}
Now, since all mammals have hair and nipples (AFAIK, I'm not a zoologist), we can roll this into the abstract base class
public abstract class Mammal() implements IPet{
#override
public walksUpright(){
throw new NotSupportedException("Walks Upright not implemented");
}
#override
public hasNipples(){return true}
#override
public hasHair(){return true}
And then the concrete classes merely define that they walk upright.
public class Ape extends Mammal(){
#override
public walksUpright(return true)
}
public class Catextends Mammal(){
#override
public walksUpright(return false)
}
This design is nice when there are lots of concrete classes, and you don't want to maintain boilerplate just to program to an interface. If new methods were added to the interface, it would break all of the resulting classes, so you are still getting the advantages of the interface approach.
In this case, the abstract could just as well be concrete; however, the abstract designation helps to emphasize that this pattern is being employed.
An inheritor of a base class should have an "is a" relationship. Interface represents An "implements a" relationship.
So only use a base class when your inheritors will maintain the is a relationship.
Use Interfaces to enforce a contract ACROSS families of unrelated classes. For example, you might have common access methods for classes that represent collections, but contain radically different data i.e. one class might represent a result set from a query, while the other might represent the images in a gallery. Also, you can implement multiple interfaces, thus allowing you to blend (and signify) the capabilities of the class.
Use Inheritance when the classes bear a common relationship and therefore have a similair structural and behavioural signature, i.e. Car, Motorbike, Truck and SUV are all types of road vehicle that might contain a number of wheels, a top speed
I want to know the reason behind the design of restricting Abstract Methods in Non Abstract Class (in C#).
I understand that the class instance won't have the definition and thus they wont be callable, but when static methods are defined,they are excluded from the instance too. Why abstract methods are not handled that way, any specific reason for the same?
They could be allowed in concrete class and the deriving class can be forced to implement methods, basically that is what, is done in case of abstract methods in an abstract class.
First, I think that what you're asking doesn't logically make sense. If you have an abstract method, it basically means that the method is unfinished (as #ChrisSinclair pointed out). But that also means the whole class is unfinished, so it also has to be abstract.
Or another way to put it: if you had an abstract method on a class that wasn't abstract, that would mean you had a method that cannot be called. But that means the method is not useful, you could remove it and it would all work the same.
Now, I'll try to be more concrete by using an example: imagine the following code:
Animal[] zoo = new Animal[] { new Monkey(), new Fish(), new Animal() };
foreach (Animal animal in zoo)
animal.MakeSound();
Here, Animal is the non-abstract base class (which is why I can put it directly into the array), Monkey and Fish are derived from Animal and MakeSound() is the abstract method. What should this code do? You didn't state that clearly, but I can imagine few options:
You can't call MakeSound() on a variable typed as Animal, you can call it only using a variable typed as one of the derived classes, so this is a compile error.
This is not a good solution, because the whole point of abstract is to be able to treat instances of derived classes as the base class, and still get behaviour that's specific to the derived class. If you want this, just put a normal (no abstract, virtual or override) method into each derived class and don't do anything with the base class.
You can't call MakeSound() on an object whose runtime type is actually Animal, so this is a runtime error (an exception).
This is also not a good solution. C# is a statically typed language and so it tries to catch errors like “you can't call this method” at compile time (with obvious exceptions like reflection and dynamic), so making this into a runtime error wouldn't fit with the rest of the language. Besides, you can do this easily by creating a virtual method in the base class that throws an exception.
To sum up, you want something that doesn't make much sense, and smells of bad design (a base class that behaves differently than its derived classes) and can be worked around quite easily. These are all signs of a feature that should not be implemented.
So, you want to allow
class C { abstract void M(); }
to compile. Suppose it did. What do you then want to happen when someone does
new C().M();
? You want an execution-time error? Well, in general C# prefers compile-time errors to execution-time errors. If you don't like that philosophy, there are other languages available...
I think you've answered your own question, an abstract method isn't defined initially. Therefore the class cannot be instanciated. You're saying it should ignore it, but by definition when adding an abstract method you're saying "every class created from this must implement this {abstract method}" hence the class where you define the abstract class must also be abstract because the abstract method is still undefined at that point.
The abstract class may contain abstract member. There is the only method declaration if any method has an abstract keyword we can't implement in the same class. So the abstract class is incompleted. That is why the object is not created for an abstract class.
Non-abstract class can't contain abstract member.
Example:
namespace InterviewPreparation
{
public abstract class baseclass
{
public abstract void method1(); //abstract method
public abstract void method2(); //abstract method
public void method3() { } //Non- abstract method----->It is necessary to implement here.
}
class childclass : baseclass
{
public override void method1() { }
public override void method2() { }
}
public class Program //Non Abstract Class
{
public static void Main()
{
baseclass b = new childclass(); //create instance
b.method1();
b.method2();
b.method3();
}
}
}
You can achieve what you want using "virtual" methods but using virtual methods can lead to more runtime business logic errors as a developer is not "forced" to implement the logic in the child class.
I think there's a valid point here. An abstract method is the perfect solution as it would "enforce" the requirement of defining the method body in children.
I have come across many many situations where the parent class had to (or it would be more efficient to) implement some logic but "Only" children could implement rest of the logic"
So if the opportunity was there I would happily mix abstract methods with complete methods.
#AakashM, I appreciate C# prefers compile time errors. So do I. And so does anybody. This is about thinking out-of-the-box.
And supporting this will not affect that.
Let's think out of the box here, rather than saying "hurrah" to big boy decisions.
C# compiler can detect and deny someone of using an abstract class directly because it uses the "abstract" keyword.
C# also knows to force any child class to implement any abstract methods. How? because of the use of the "abstract" keyword.
This is pretty simple to understand to anyone who has studied the internals of a programming language.
So, why can't C# detect an "abstract" keyword next to a method in a normal class and handle it at the COMPILE TIME.
The reason is it takes "reworking" and the effort is not worth supporting the small demand.
Specially in an industry that lacks people who think out of the boxes that big boys have given them.
It's still not clear why you would want that, but an alternative approach could be to force derived classes to provide a delegate instance. Something like this
class MyConcreteClass
{
readonly Func<int, DateTime, string> methodImpl;
// constructor requires a delegate instance
public MyConcreteClass(Func<int, DateTime, string> methodImpl)
{
if (methodImpl == null)
throw new ArgumentNullException();
this.methodImpl = methodImpl;
}
...
}
(The signature string MethodImpl(int, DateTime) is just an example, of course.)
Otherwise, I can recommend the other answers to explain why your wish probably isn't something which would make the world better.
So the answers above are correct: having abstract methods makes the class inherently abstract. If you cannot instance part of a class, then you cannot instance the class itself. However, the answers above didn't really discuss your options here.
First, this is mainly an issue for public static methods. If the methods aren't intended to be public, then you could have protected non-abstract methods, which are allowed in an abstract class declaration. So, you could just move these static methods to a separate static class without much issue.
As an alternative, you could keep those methods in the class, but then instead of having abstract methods, declare an interface. Essentially, you have a multiple-inheritance problem as you want the derived class to inherit from two conceptually different objects: a non-abstract parent with public static members, and an abstract parent with abstract methods. Unlike some other frameworks, C# does permit multiple inheritance. Instead, C# offers a formal interface declaration that is intended to fill this purpose. Moreover, the whole point of abstract methods, really, is just to impose a certain conceptual interface.
I have a scenario very similar to what the OP is trying to achieve. In my case the method that I want to make abstract would be a protected method and would only be known to the base class. So the "new C().M();" does not apply because the method in question is not public. I want to be able to instantiate and call public methods on the base class (therefore it needs to be non-abstract), but I need these public methods to call a protected implementation of the protected method in the child class and have no default implementation in the parent. In a manner of speaking, I need to force descendants to override the method. I don't know what the child class is at compile time due to dependency injection.
My solution was to follow the rules and use a concrete base class and a virtual protected method. For the default implementation, though, I throw a NotImplementedException with the error "The implementation for method name must be provided in the implementation of the child class."
protected virtual void MyProtectedMethod()
{
throw new NotImplementedException("The implementation for MyProtectedMethod must be provided in the implementation of the child class.");
}
In this way a default implementation can never be used and implementers of descendant implementations will quickly see that they missed an important step.
first question here, so hopefully you'll all go gently on me!
I've been reading an awful lot over the past few days about polymorphism, and trying to apply it to what I do in c#, and it seems there are a few different ways to implement it. I hope I've gotten a handle on this, but I'd be delighted even if I haven't for clarification.
From what I can see, I've got 3 options:
I can just inherit from a base
class and use the keyword
'virtual' on any methods that I
want my derived classes to
override.
I could implement an abstract class with virtual methods
and do it that way,
I could use an interface?
From what I can see, if I don't require any implementation logic in the base, then an interface gives me the most flexibility (as I'm then not limiting myself with regards multiple inheritance etc.), but if I require the base to be able to do something on top of whatever the derived classes are doing, then going with either 1 or 2 would be the better solution?
Thanks for any input on this guys - I have read so much this weekend, both on this site and elsewhere, and I think I understand the approaches now, yet I just want to clarify in a language specific way if I'm on the right track. Hopefully also I've tagged this correctly.
Cheers,
Terry
An interface offers the most abstraction; you aren't tied to any specific implementation (useful if the implementation must, for other reasons, have a different base class).
For true polymorphism, virtual is a must; polymorphism is most commonly associated with type subclassing...
You can of course mix the two:
public interface IFoo {
void Bar();
}
class Foo : IFoo {
public virtual void Bar() {...}
}
class Foo2 : Foo {
public override ...
}
abstract is a separate matter; the choice of abstract is really: can it be sensibly defined by the base-class? If there is there no default implementation, it must be abstract.
A common base-class can be useful when there is a lot of implementation details that are common, and it would be pointless to duplicate purely by interface; but interestingly - if the implementation will never vary per implementation, extension methods provide a useful way of exposing this on an interface (so that each implementation doesn't have to do it):
public interface IFoo {
void Bar();
}
public static class FooExtensions {
// just a silly example...
public static bool TryBar(this IFoo foo) {
try {
foo.Bar();
return true;
} catch {
return false;
}
}
}
All three of the above are valid, and useful in their own right.
There is no technique which is "best". Only programming practice and experience will help you to choose the right technique at the right time.
So, pick a method that seems appropriate now, and implement away.
Watch what works, what fails, learn your lessons, and try again.
Interfaces are usually favored, for several reasons :
Polymorphisme is about contracts, inheritance is about reuse
Inheritance chains are difficult to get right (especially with single inheritance, see for instance the design bugs in the Windows Forms controls where features like scrollability, rich text, etc. are hardcoded in the inheritance chain
Inheritance causes maintenance problems
That said, if you want to leverage common functionnality, you can use interfaces for polymorphism (have your methods accept interfaces) but use abstract base classes to share some behavior.
public interface IFoo
{
void Bar();
enter code here
}
will be your interface
public abstract class BaseFoo : IFoo
{
void Bar
{
// Default implementation
}
}
will be your default implementation
public class SomeFoo : BaseFoo
{
}
is a class where you reuse your implementation.
Still, you'll be using interfaces to have polymorphism:
public class Bar
{
int DoSometingWithFoo(IFoo foo)
{
foo.Bar();
}
}
notice that we're using the interface in the method.
The first thing you should ask is "why do I need to use polymorphism?", because polymorphism is not and end by itself, but a mean to reach an end. Once you have your problem well defined, it should be more clear which approach to use.
Anyway, those three aproaches you commented are not exclusive, you still can mix them if you need to reuse logic between just some classes but not others, or need some distinct interfaces...
use abstract classes to enforce a class structure
use interfaces for describing behaviors
It really depends on how you want to structure your code and what you want to do with it.
Having a base class of type Interface is good from the point of view of testing as you can use mock objects to replace it.
Abstract classes are really if you wish to implement code in some functions and not others, as if an abstract class has nothing other than abstract functions it is effectively an Interface.
Remember that an abstract class cannot be instantiated and so for working code you must have a class derived from it.
In practice all are valid.
I tend to use an abstract class if I have a lot of classes which derive from it but on a shallow level (say only 1 class down).
If I am expecting a deep level of inheritence then I use a class with virtual functions.
Eitherway it's best to keep classes simple, along with their inheritence as the more complex they become the more likelyhood of introducing bugs.
I'm a bit confused about the usage of Abstract classes in C#. In C++, it makes sense to define a template which classes inheriting the abstract class can follow. But, in C# doesn't Interface serve the same purpose?
True that abstract classes can have default implementation which is not provided by Interfaces. So if implementation doesn't need to be included in base class, is it better to go for Interfaces?
I still like to provide a default abstract implementation of an interface, assuming it's a substantial interface (and it makes sense). You never know when you might add something to the interface that has an easy default implementation that could be included and given "for free" to anyone who inherits from the abstract base class.
This CodeProject article has a lot of information on the difference between the two including a table comparing and contrasting the features of each.
Interfaces define the contract between classes - the ways classes call each other. A class can implement multiple interfaces, but can only inherit from one abstract class.
True that abstract classes can have default implementation which is not provided by Interfaces. So if implementation doesn't need to be included in base class, is it better to go for Interfaces?
Yes :). If it makes sense to implement some methods in the base class which will be common to all inhereted class you should use an abstract class. If the base class would only be used to define an interface but there is no common logic between the inherited classes, use an interface.
Interfaces and abstract classes serve different goals. Interfaces are used to declare contracts for classes while abstract classes are used to share a common implementation.
If you only use abstract classes, your classes cannot inherit from other classes because C# does not support multiple inheritance. If you only use interfaces, your classes cannot share common code.
public interface IFoo
{
void Bar();
}
public abstract class FooBase : IFoo
{
public abstract void Bar()
{
// Do some stuff usually required for IFoo.
}
}
Now we can use the interface and base implementation in various situations.
public class FooOne : FooBase
{
public override void Bar()
{
base.Bar(); // Use base implementation.
// Do specialized stuff.
}
}
public class FooTwo : FooBase
{
public override void Bar()
{
// Do other specialized stuff.
base.Bar(); // Use base implementation.
// Do more specialized stuff.
}
}
// This class cannot use the base implementation from FooBase because
// of inheriting from OtherClass but it can still implement IFoo.
public class FooThree : OtherClass, IFoo
{
public virtual void Bar()
{
// Do stuff.
}
}
For your first question, Yes.
For your second answer i'll give you some tips I've followed.
Use abstract classes and interfaces in combination to optimize your design trade-offs.
Use an abstract class
When creating a class library which will be widely distributed or reused—especially to clients, use an abstract class in preference to an interface; because, it simplifies versioning.
Use an abstract class to define a common base class for a family of types.
Use an abstract class to provide default behavior.
Subclass only a base class in a hierarchy to which the class logically belongs.
Use an interface
When creating a standalone project which can be changed at will, use an interface in preference to an abstract class; because, it offers more design flexibility.
Use interfaces to introduce polymorphic behavior without subclassing and to model multiple inheritance—allowing a specific type to support numerous behaviors.
Use an interface to design a polymorphic hierarchy for value types.
Use an interface when an immutable contract is really intended.
A well-designed interface defines a very specific range of functionality. Split up interfaces that contain unrelated functionality.
You can implement any number of Interfaces, but can only inherit one Class. So Classes and Interfaces are quite different beasts in C# and you cannot use them interchangeably. In C# abstract classes are still classes, not interfaces.
If you don't have any default/common code, then go with an interface.
An abstract class can also serve as a template, where it defines the steps of some algorithm and the order in which they are called, and derived classes provide the implementation of these steps:
public abstract class Processor
{
// this is the only public method
// implements the order of the separate steps
public void Process()
{
Step1();
Step2();
//...
}
// implementation is provided by derived classes
protected abstract void Step1();
protected abstract void Step2();
}
Whilst it's true that an abstract class with no implementation is equivalent to an interface, interfaces and abstract classes are used for different things.
Interfaces can be used for polymorphism in the most general sense. For example, ICollection is used to define the interface for all collections (there are quite a few). Here it is defining the operations that you want to perform on a certain kind of type. There are many other uses (such as testability, dependency injection etc). Also, interfaces can be mixed and this works both conceptually and technically.
Abstract classes are more to do with templateable behaviour, where virtual methods are a place to 'fill in the gaps'. Obviously you can't mix abstract classes (at least, not in C#).
In C# a large deterrent for the use of abstract classes is that you can only use one. With interfaces you have the advantage of not limiting the base class for the implementation. To this end, I always use an interface even if I create an abstract base class to aid with the implementation.
Often another annoyance of base abstract classes is that they tend to rely on template arguments. This can make it very difficult for the rest of your code to utilize. The easy answer for this is to provide an interface to talk to the abstract class without knowing the type argument of the template class.
Others seem to be typing their answer faster, but allow me to summarize...
Use an interface. If you need to share implementation, you can also create an abstract base class that provides common implementation details.
Note that with C#3, you can provide default behavior for interfaces through the use of extension methods. There are some limitations, though, and abstract classes still have their place.
The rule I follow when modeling is:
Classes(abstract included) and structs model entities.Interfaces model behavior.
Entities implementing an interface can be considered as exhibiting behaviors that the interface(contract) exposes.
This is hinted at in a few of the answers but not explicitly stated.
The fact that you can implement multiple interfaces and only inherit from one base class, as if they were two sides of the same coin, isn't a good way to look at it.
Don't think of interfaces as part of an object hierarchy. They are usually just small parts of functionality (or at least specific if not small) that your real object heirarchy can declare as implementing. Take IDisposable for instance. If you were the one writing that, would you ask yourself whether it should have been an abstract class or an interface? It seems obvious that in this case they are two completely different things. I want to BE disposable. Think ICloneable and IEnumerable. You can implement those in your class without having to try and make your class derive from some unrelated classes like List or Array. Or take IEnumerator. Simply gives a MoveNext type of view to an object. My class can provide that functionality without having to awkwardly be derived from some other sequential collection data type that has nothing to do with my class.
I always prefer interfaces as long as the base class don't have some really "heavy duty" implementation that will save lots of time to the implementers.
giving that .net allows only one base class inheritance, forcing your users to inherit is a huge limitation.
You should always prefer programming to interfaces than to concrete classes.
If you also want to have a default implementation you can still create a base class which implements your interface(s).