We Keep Coding

Regex only letters except set of numbers

I'm using Replace(#"[^a-zA-Z]+", "");
leave only letters, but I have a set of numbers or characters that I want to keep as well, ex: 122456 and 112466. But I'm having trouble leaving it only if it's this sequence:
ex input:
abc 1239 asm122456000
I want to:
abscasm122456
tried this: ([^a-zA-Z])+|(?!122456)

My answer doesn't applying Replace(), but achieves a similar result:
(?:[a-zA-Z]+|\d{6})
which captures the group (non-capturing group) with the alphabetic character(s) or a set of digits with 6 occurrences.
Regex 101 & Test Result
Join all the matching values into a single string.
using System.Linq;
Regex regex = new Regex("(?:[a-zA-Z]+|\\d{6})");
string input = "abc 1239 asm12245600";
string output = "";
var matches = regex.Matches(input);
if (matches.Count > 0)
output = String.Join("", matches.Select(x => x.Value));
Sample .NET Fiddle

Alternate way,
using .Split() and .All(),
string input = "abc 1239 asm122456000";
string output = string.Join("", input.Split().Where(x => !x.All(char.IsDigit)));
.NET Fiddle

It is very simple: you need to match and capture what you need to keep, and just match what you need to remove, and then utilize a backreference to the captured group value in the replacement pattern to put it back into the resulting string.
Here is the regex:
(122456|112466)|[^a-zA-Z]
See the regex demo. Details:
(122456|112466) - Capturing group with ID 1: either of the two alternatives
| - or
[^a-zA-Z] - a char other than an ASCII letter (use \P{L} if you need to match any char other than any Unicode letter).
Note the removed + quantifier as [^A-Za-z] also matches digits.
You need to use $1 in the replacement:
var result = Regex.Replace(text, #"(122456|112466)|[^a-zA-Z]", "$1");

Regex to find special pattern

I have a string to parse. First I have to check if string contains special pattern:
I wanted to know if there is substrings which starts with "$(",
and end with ")",
and between those start and end special strings,there should not be
any white-empty space,
it should not include "$" character inside it.
I have a little regex for it in C#
string input = "$(abc)";
string pattern = #"\$\(([^$][^\s]*)\)";
Regex rgx = new Regex(pattern, RegexOptions.IgnoreCase);
MatchCollection matches = rgx.Matches(input);
foreach (var match in matches)
{
Console.WriteLine("value = " + match);
}
It works for many cases but failed at input= $(a$() , which inside the expression is empty. I wanted NOT to match when input is $().[ there is nothing between start and end identifiers].
What is wrong with my regex?

Note: [^$] matches a single character but not of $
Use the below regex if you want to match $()
\$\(([^\s$]*)\)
Use the below regex if you don't want to match $(),
\$\(([^\s$]+)\)
* repeats the preceding token zero or more times.
+ Repeats the preceding token one or more times.
Your regex \(([^$][^\s]*)\) is wrong. It won't allow $ as a first character inside () but it allows it as second or third ,, etc. See the demo here. You need to combine the negated classes in your regex inorder to match any character not of a space or $.

Your current regex does not match $() because the [^$] matches at least 1 character. The only way I can think of where you would have this match would be when you have an input containing more than one parens, like:
$()(something)
In those cases, you will also need to exclude at least the closing paren:
string pattern = #"\$\(([^$\s)]+)\)";
The above matches for example:
abc in $(abc) and
abc and def in $(def)$()$(abc)(something).

Simply replace the * with a + and merge the options.
string pattern = #"\$\(([^$\s]+)\)";
+ means 1 or more
* means 0 or more

Regex removing empty spaces when using replace

My situation is not about removing empty spaces, but keeping them. I have this string >[database values] which I would like to find. I created this RegEx to find it then go in and remove the >, [, ]. The code below takes a string that is from a document. The first pattern looks for anything that is surrounded by >[some stuff] it then goes in and "removes" >, [, ]
string decoded = "document in string format";
string pattern = #">\[[A-z, /, \s]*\]";
string pattern2 = #"[>, \[, \]]";
Regex rgx = new Regex(pattern);
Regex rgx2 = new Regex(pattern2);
foreach (Match match in rgx.Matches(decoded))
{
string replacedValue= rgx2.Replace(match.Value, "");
Console.WriteLine(match.Value);
Console.WriteLine(replacedValue);
What I am getting in first my Console.WriteLine is correct. So I would be getting things like >[123 sesame St]. But my second output shows that my replace removes not just the characters but the spaces so I would get something like this 123sesameSt. I don't see any space being replaced in my Regex. Am I forgetting something, perhaps it is implicitly in a replace?

The [A-z, /, \s] and [>, \[, \]] in your patterns are also looking for commas and spaces. Just list the characters without delimiting them, like this: [A-Za-z/\s]
string pattern = #">\[[A-Za-z/\s]*\]";
string pattern2 = #"[>,\[\]]";
Edit to include Casimir's tip.

After rereading your question (if I understand well) I realize that your two steps approach is useless. You only need one replacement using a capture group:
string pattern = #">\[([^]]*)]";
Regex rgx = new Regex(pattern);
string result = rgx.Replace(yourtext, "$1");
pattern details:
>\[ # literals: >[
( # open the capture group 1
[^]]* # all that is not a ]
) # close the capture group 1
] # literal ]
the replacement string refers to the capture group 1 with $1

By defining [>, \[, \]] in pattern2 you define a character group consisting of single characters like >, ,, , [ and every other character you listed in the square brackets. But I guess you don't want to match space and ,. So if you don't want to match them leave them out like
string pattern2 = #"[>\[\]]";
Alternatively, you could use
string pattern2 = #"(>\[|\])";
Thereby, you either match >[ or ] which better expresses your intention.

C# RegEx - get only first match in string

I've got an input string that looks like this:
level=<device[195].level>&name=<device[195].name>
I want to create a RegEx that will parse out each of the <device> tags, for example, I'd expect two items to be matched from my input string: <device[195].level> and <device[195].name>.
So far I've had some luck with this pattern and code, but it always finds both of the device tags as a single match:
var pattern = "<device\\[[0-9]*\\]\\.\\S*>";
Regex rgx = new Regex(pattern);
var matches = rgx.Matches(httpData);
The result is that matches will contain a single result with the value <device[195].level>&name=<device[195].name>
I'm guessing there must be a way to 'terminate' the pattern, but I'm not sure what it is.

Use non-greedy quantifiers:
<device\[\d+\]\.\S+?>
Also, use verbatim strings for escaping regexes, it makes them much more readable:
var pattern = #"<device\[\d+\]\.\S+?>";
As a side note, I guess in your case using \w instead of \S would be more in line with what you intended, but I left the \S because I can't know that.

depends how much of the structure of the angle blocks you need to match, but you can do
"\\<device.+?\\>"

I want to create a RegEx that will parse out each of the <device> tags
I'd expect two items to be matched from my input string:
1. <device[195].level>
2. <device[195].name>
This should work. Get the matched group from index 1
(<device[^>]*>)
Live demo
String literals for use in programs:
#"(<device[^>]*>)"

Change your repetition operator and use \w instead of \S
var pattern = #"<device\[[0-9]+\]\.\w+>";
String s = #"level=<device[195].level>&name=<device[195].name>";
foreach (Match m in Regex.Matches(s, #"<device\[[0-9]+\]\.\w+>"))
Console.WriteLine(m.Value);
Output
<device[195].level>
<device[195].name>

Use named match groups and create a linq entity projection. There will be two matches, thus separating the individual items:
string data = "level=<device[195].level>&name=<device[195].name>";
string pattern = #"
(?<variable>[^=]+) # get the variable name
(?:=<device\[) # static '=<device'
(?<index>[^\]]+) # device number index
(?:]\.) # static ].
(?<sub>[^>]+) # Get the sub command
(?:>&?) # Match but don't capture the > and possible &
";
// Ignore pattern whitespace is to document the pattern, does not affect processing.
var items = Regex.Matches(data, pattern, RegexOptions.IgnorePatternWhitespace)
.OfType<Match>()
.Select (mt => new
{
Variable = mt.Groups["variable"].Value,
Index = mt.Groups["index"].Value,
Sub = mt.Groups["sub"].Value
})
.ToList();
items.ForEach(itm => Console.WriteLine ("{0}:{1}:{2}", itm.Variable, itm.Index, itm.Sub));
/* Output
level:195:level
name:195:name
*/

Get sub-strings from a string that are enclosed using some specified character

Suppose I have a string
Likes (20)
I want to fetch the sub-string enclosed in round brackets (in above case its 20) from this string. This sub-string can change dynamically at runtime. It might be any other number from 0 to infinity. To achieve this my idea is to use a for loop that traverses the whole string and then when a ( is present, it starts adding the characters to another character array and when ) is encountered, it stops adding the characters and returns the array. But I think this might have poor performance. I know very little about regular expressions, so is there a regular expression solution available or any function that can do that in an efficient way?

If you don't fancy using regex you could use Split:
string foo = "Likes (20)";
string[] arr = foo.Split(new char[]{ '(', ')' }, StringSplitOptions.None);
string count = arr[1];
Count = 20
This will work fine regardless of the number in the brackets ()
e.g:
Likes (242535345)
Will give:
242535345

Works also with pure string methods:
string result = "Likes (20)";
int index = result.IndexOf('(');
if (index >= 0)
{
result = result.Substring(index + 1); // take part behind (
index = result.IndexOf(')');
if (index >= 0)
result = result.Remove(index); // remove part from )
}
Demo

For a strict matching, you can do:
Regex reg = new Regex(#"^Likes\((\d+)\)$");
Match m = reg.Match(yourstring);
this way you'll have all you need in m.Groups[1].Value.
As suggested from I4V, assuming you have only that sequence of digits in the whole string, as in your example, you can use the simpler version:
var res = Regex.Match(str,#"\d+")
and in this canse, you can get the value you are looking for with res.Value
EDIT
In case the value enclosed in brackets is not just numbers, you can just change the \d with something like [\w\d\s] if you want to allow in there alphabetic characters, digits and spaces.

Even with Linq:
var s = "Likes (20)";
var s1 = new string(s.SkipWhile(x => x != '(').Skip(1).TakeWhile(x => x != ')').ToArray());

const string likes = "Likes (20)";
int likesCount = int.Parse(likes.Substring(likes.IndexOf('(') + 1, (likes.Length - likes.IndexOf(')') + 1 )));

Matching when the part in paranthesis is supposed to be a number;
string inputstring="Likes (20)"
Regex reg=new Regex(#"\((\d+)\)")
string num= reg.Match(inputstring).Groups[1].Value
Explanation:
By definition regexp matches a substring, so unless you indicate otherwise the string you are looking for can occur at any place in your string.
\d stand for digits. It will match any single digit.
We want it to potentially be repeated several times, and we want at least one. The + sign is regexp for previous symbol or group repeated 1 or more times.
So \d+ will match one or more digits. It will match 20.
To insure that we get the number that is in paranteses we say that it should be between ( and ). These are special characters in regexp so we need to escape them.
(\d+) would match (20), and we are almost there.
Since we want the part inside the parantheses, and not including the parantheses we tell regexp that the digits part is a single group.
We do that by using parantheses in our regexp. ((\d+)) will still match (20), but now it will note that 20 is a subgroup of this match and we can fetch it by Match.Groups[].
For any string in parantheses things gets a little bit harder.
Regex reg=new Regex(#"\((.+)\)")
Would work for many strings. (the dot matches any character) But if the input is something like "This is an example(parantesis1)(parantesis2)", you would match (parantesis1)(parantesis2) with parantesis1)(parantesis2 as the captured subgroup. This is unlikely to be what you are after.
The solution can be to do the matching for "any character exept a closing paranthesis"
Regex reg=new Regex(#"\(([^\(]+)\)")
This will find (parantesis1) as the first match, with parantesis1 as .Groups[1].
It will still fail for nested paranthesis, but since regular expressions are not the correct tool for nested paranthesis I feel that this case is a bit out of scope.
If you know that the string always starts with "Likes " before the group then Saves solution is better.