when converting html to pdf using itextsharp the style iam applying with css for the web page is not working in the converted pdf.
here is my css code :
<style type="text/css">
.cssformat
{
width:300px;
height:200px;
border:2px solid black;
background-color:white;
border-top-left-radius:60px 90px;
border-bottom-right-radius:60px 90px;
}
</style>
here is my html code :
<div id="divpdf" runat="server">
<table id="tid" runat="server">
<tr>
<td>
<asp:Label ID="Label1" runat="server" Text="this is new way of pdf" CssClass="cssformat"></asp:Label>
</td>
</tr>
</table>
</div>
The following is what i have tried with c# :
Response.ContentType = "application/pdf";
Response.AddHeader("content-disposition", "attachment;filename=TestPage.pdf");
Response.Cache.SetCacheability(HttpCacheability.NoCache);
StringBuilder sb = new StringBuilder();
StringWriter sw = new StringWriter();
HtmlTextWriter hw = new HtmlTextWriter(sw);
Document pdfDoc = new Document(PageSize.A4, 60f, 80f, -2f, 35f);
divpdf.RenderControl(hw);
StringReader sr = new StringReader(sw.ToString());
HTMLWorker htmlparser = new HTMLWorker(pdfDoc);
PdfWriter writer = PdfWriter.GetInstance(pdfDoc, Response.OutputStream);
pdfDoc.Open();
hw1.Parse(new StringReader(sttt));
htmlparser.Parse(sr);
pdfDoc.Close();
Response.Write(pdfDoc);
Response.End();
sw.Close();
sr.Close();
hw.Close();
I struggled quite a bit to convert from HTML to PDF using iTextSharp and eventually gave up because I could not get a converted PDF that looked 100% the same as my HTML5/CSS3 page. So I'm giving you the alternative that eventually worked for me.
There is surprisingly very little options available when you are not prepared to pay for a commercial library. I had the same requirement from one of my clients(to convert from HTML to PDF) that did not want to pay for any third party tools, so I had to make a plan. This is what I did, not the best solution, but it got the job done
I downloaded the newest version of wkhtmltopdf. Unfortunately the wkhtmltopdf tool did not display some of my google graphs embedded in my HTML when converting to PDF. So I used the wkhtmltoimage tool also included to convert to a PNG, which woked as expected and displayed all the graphs.
I then downloaded the newest version of imagemagick and converted the PNG to PDF.
I automated this process using C#.
Unfortunately this is not the most elegant solution because you have to perform two conversions and do a bit of work to automate everything, but this is the best solution I could come up with that gave me the desired results and quality.
Of course there are lots of commercial software out there that will do a faster and better job.
Just a side note:
The web page that I had to convert was devloped in HTML5 and CSS3 using version 3 of bootstrap and it contained some google graphs and charts. Everything was converted without any problems.
Below is the example to convert HTML content containing the inline CSS Code.
public static class PdfCreator {
public static string ConvertHtmlToPdf(string htmlContent, string fileNameWithoutExtension, string filePath, string cssContent = "") {
if (!Directory.Exists(filePath)) {
Directory.CreateDirectory(filePath);
}
var fileNameWithPath = Path.Combine(filePath, fileNameWithoutExtension + ".pdf");
using(var stream = new FileStream(fileNameWithPath, FileMode.Create)) {
using(var document = new Document()) {
var writer = PdfWriter.GetInstance(document, stream);
document.Open();
// instantiate custom tag processor and add to `HtmlPipelineContext`.
var tagProcessorFactory = Tags.GetHtmlTagProcessorFactory();
tagProcessorFactory.AddProcessor(new TableData(), new string[] {
HTML.Tag.TD
});
var htmlPipelineContext = new HtmlPipelineContext(null);
htmlPipelineContext.SetTagFactory(tagProcessorFactory);
var pdfWriterPipeline = new PdfWriterPipeline(document, writer);
var htmlPipeline = new HtmlPipeline(htmlPipelineContext, pdfWriterPipeline);
// get an ICssResolver and add the custom CSS
var cssResolver = XMLWorkerHelper.GetInstance().GetDefaultCssResolver(true);
cssResolver.AddCss(cssContent, "utf-8", true);
var cssResolverPipeline = new CssResolverPipeline(
cssResolver, htmlPipeline);
var worker = new XMLWorker(cssResolverPipeline, true);
var parser = new XMLParser(worker);
using(var stringReader = new StringReader(htmlContent)) {
parser.Parse(stringReader);
}
}
}
return fileNameWithPath;
}
}
The output format of <asp:Lable> is "span", which is inline type of display. So change the display to block. Enjoy..
Related
I'm trying to create a CV builder that saves the CV edited by the user to a folder in my project for further processing of sending it through email, I have reached as far as using itext to create a PDF of an HTML div, but has no CSS or any of the text values I have returned from my database. Through some research i find that my problem could be solved by using itext 7 and an add-on pdfHTML but can not find any proper examples of how to use it with my ASP.NET code. Would really appreciate any help.
Bellow is the code for the on-click button event I use to generate the PDF
protected void ButtonDownload_Click(object sender, EventArgs e)
{
Response.ContentType = "application/pdf";
//Response.AddHeader("content-disposition", "attachment;filename=Panel.pdf");
Response.Cache.SetCacheability(HttpCacheability.NoCache);
StringWriter sw = new StringWriter();
HtmlTextWriter hw = new HtmlTextWriter(sw);
contentdiv.RenderControl(hw); //convert the div to PDF
StringReader sr = new StringReader(sw.ToString());
Document pdfDoc = new Document(PageSize.A4, 10f, 10f, 10f, 0f);
HTMLWorker htmlparser = new HTMLWorker(pdfDoc);
PdfWriter.GetInstance(pdfDoc, Response.OutputStream);
pdfDoc.Open();
htmlparser.Parse(sr);
pdfDoc.Close();
string filename = base.Server.MapPath("~/PDF/" + "UserCV.pdf");
HttpContext.Current.Request.SaveAs(filename, false);
Response.End();
}
This picture shows the pdf result i get when i click the download button
And this is html page it is trying to convert
The text bellow the headings on the HTML page are Labels whose values are being set by retrieving values form a database
This is an example on how to use pdfHTML
This example is quite extensive, as it also sets document properties, and registers a custom Font.
public void createPdf(String src, String dest, String resources) throws IOException {
try {
FileOutputStream outputStream = new FileOutputStream(dest);
WriterProperties writerProperties = new WriterProperties();
//Add metadata
writerProperties.addXmpMetadata();
PdfWriter pdfWriter = new PdfWriter(outputStream, writerProperties);
PdfDocument pdfDoc = new PdfDocument(pdfWriter);
pdfDoc.getCatalog().setLang(new PdfString("en-US"));
//Set the document to be tagged
pdfDoc.setTagged();
pdfDoc.getCatalog().setViewerPreferences(new PdfViewerPreferences().setDisplayDocTitle(true));
//Set meta tags
PdfDocumentInfo pdfMetaData = pdfDoc.getDocumentInfo();
pdfMetaData.setAuthor("Joris Schellekens");
pdfMetaData.addCreationDate();
pdfMetaData.getProducer();
pdfMetaData.setCreator("JS");
pdfMetaData.setKeywords("example, accessibility");
pdfMetaData.setSubject("PDF accessibility");
//Title is derived from html
// pdf conversion
ConverterProperties props = new ConverterProperties();
FontProvider fp = new FontProvider();
fp.addStandardPdfFonts();
fp.addDirectory(resources);//The noto-nashk font file (.ttf extension) is placed in the resources
props.setFontProvider(fp);
props.setBaseUri(resources);
//Setup custom tagworker factory for better tagging of headers
DefaultTagWorkerFactory tagWorkerFactory = new AccessibilityTagWorkerFactory();
props.setTagWorkerFactory(tagWorkerFactory);
HtmlConverter.convertToPdf(new FileInputStream(src), pdfDoc, props);
pdfDoc.close();
} catch (Exception e) {
e.printStackTrace();
}
}
The most relevant line here is
HtmlConverter.convertToPdf(new FileInputStream(src), pdfDoc, props);
Which essentially tells pdfHTML to perform the conversion of the inputstream (specified by src), put the content in pdfDoc and use the given ConverterProperties (specified by props).
I am using ITextSharp to convert HTML to PDF but i want the PDF to be generated of size 5cm width. I used the following code
var pgSize = new iTextSharp.text.Rectangle(2.05f, 2.05f);
Document doc = new Document(pgSize);
but it is just resizing the pdf and my data disappeared in the pdf or get hide.
How can i align the data in the center in PDF or resize the pdf? Here is my code
public void ConvertHTMLToPDF(string HTMLCode)
{
try
{
System.IO.StringWriter stringWrite = new StringWriter();
System.Web.UI.HtmlTextWriter htmlWrite = new HtmlTextWriter(stringWrite);
StringReader reader = new StringReader(HTMLCode);
var pgSize = new iTextSharp.text.Rectangle(2.05f, 2.05f);
Document doc = new Document(pgSize);
HTMLWorker parser = new HTMLWorker(doc);
PdfWriter.GetInstance(doc, new FileStream(Server.MapPath("~") + "/App_Data/HTMLToPDF.pdf",
FileMode.Create));
doc.Open();
foreach (IElement element in HTMLWorker.ParseToList(
new StringReader(HTMLCode), null))
{
doc.Add(element);
}
doc.Close();
Response.End();
}
catch (Exception ex)
{
}
}
You are creating a PDF that measures 0.0723 cm by 0.0723 cm. That is much too small to add any content. If you want to create a PDF of 5 cm by 5 cm, you need to create your document like this:
var pgSize = new iTextSharp.text.Rectangle(141.732f, 141.732f);
Document doc = new Document(pgSize);
As for the alignment, that should be defined in the HTML, but you are using an old version of iText and you are using the deprecated HTMLWorker.
You should upgrade to iText 7 and pdfHTML as described here: Converting HTML to PDF using iText
Also: the size of the page can be defined in the #page-rule of the CSS. See Huge white space after header in PDF using Flying Saucer
Why would you make it difficult for yourself by using an old iText version, when the new version allows you to do this:
#page {
size: 5cm 5cm;
}
I want to convert the below HTML to PDF using iTextSharp but don't know where to start:
<style>
.headline{font-size:200%}
</style>
<p>
This <em>is </em>
<span class="headline" style="text-decoration: underline;">some</span>
<strong>sample<em> text</em></strong>
<span style="color: red;">!!!</span>
</p>
First, HTML and PDF are not related although they were created around the same time. HTML is intended to convey higher level information such as paragraphs and tables. Although there are methods to control it, it is ultimately up to the browser to draw these higher level concepts. PDF is intended to convey documents and the documents must "look" the same wherever they are rendered.
In an HTML document you might have a paragraph that's 100% wide and depending on the width of your monitor it might take 2 lines or 10 lines and when you print it it might be 7 lines and when you look at it on your phone it might take 20 lines. A PDF file, however, must be independent of the rendering device, so regardless of your screen size it must always render exactly the same.
Because of the musts above, PDF doesn't support abstract things like "tables" or "paragraphs". There are three basic things that PDF supports: text, lines/shapes and images. (There are other things like annotations and movies but I'm trying to keep it simple here.) In a PDF you don't say "here's a paragraph, browser do your thing!". Instead you say, "draw this text at this exact X,Y location using this exact font and don't worry, I've previously calculated the width of the text so I know it will all fit on this line". You also don't say "here's a table" but instead you say "draw this text at this exact location and then draw a rectangle at this other exact location that I've previously calculated so I know it will appear to be around the text".
Second, iText and iTextSharp parse HTML and CSS. That's it. ASP.Net, MVC, Razor, Struts, Spring, etc, are all HTML frameworks but iText/iTextSharp is 100% unaware of them. Same with DataGridViews, Repeaters, Templates, Views, etc. which are all framework-specific abstractions. It is your responsibility to get the HTML from your choice of framework, iText won't help you. If you get an exception saying The document has no pages or you think that "iText isn't parsing my HTML" it is almost definite that you don't actually have HTML, you only think you do.
Third, the built-in class that's been around for years is the HTMLWorker however this has been replaced with XMLWorker (Java / .Net). Zero work is being done on HTMLWorker which doesn't support CSS files and has only limited support for the most basic CSS properties and actually breaks on certain tags. If you do not see the HTML attribute or CSS property and value in this file then it probably isn't supported by HTMLWorker. XMLWorker can be more complicated sometimes but those complications also make it more extensible.
Below is C# code that shows how to parse HTML tags into iText abstractions that get automatically added to the document that you are working on. C# and Java are very similar so it should be relatively easy to convert this. Example #1 uses the built-in HTMLWorker to parse the HTML string. Since only inline styles are supported the class="headline" gets ignored but everything else should actually work. Example #2 is the same as the first except it uses XMLWorker instead. Example #3 also parses the simple CSS example.
//Create a byte array that will eventually hold our final PDF
Byte[] bytes;
//Boilerplate iTextSharp setup here
//Create a stream that we can write to, in this case a MemoryStream
using (var ms = new MemoryStream()) {
//Create an iTextSharp Document which is an abstraction of a PDF but **NOT** a PDF
using (var doc = new Document()) {
//Create a writer that's bound to our PDF abstraction and our stream
using (var writer = PdfWriter.GetInstance(doc, ms)) {
//Open the document for writing
doc.Open();
//Our sample HTML and CSS
var example_html = #"<p>This <em>is </em><span class=""headline"" style=""text-decoration: underline;"">some</span> <strong>sample <em> text</em></strong><span style=""color: red;"">!!!</span></p>";
var example_css = #".headline{font-size:200%}";
/**************************************************
* Example #1 *
* *
* Use the built-in HTMLWorker to parse the HTML. *
* Only inline CSS is supported. *
* ************************************************/
//Create a new HTMLWorker bound to our document
using (var htmlWorker = new iTextSharp.text.html.simpleparser.HTMLWorker(doc)) {
//HTMLWorker doesn't read a string directly but instead needs a TextReader (which StringReader subclasses)
using (var sr = new StringReader(example_html)) {
//Parse the HTML
htmlWorker.Parse(sr);
}
}
/**************************************************
* Example #2 *
* *
* Use the XMLWorker to parse the HTML. *
* Only inline CSS and absolutely linked *
* CSS is supported *
* ************************************************/
//XMLWorker also reads from a TextReader and not directly from a string
using (var srHtml = new StringReader(example_html)) {
//Parse the HTML
iTextSharp.tool.xml.XMLWorkerHelper.GetInstance().ParseXHtml(writer, doc, srHtml);
}
/**************************************************
* Example #3 *
* *
* Use the XMLWorker to parse HTML and CSS *
* ************************************************/
//In order to read CSS as a string we need to switch to a different constructor
//that takes Streams instead of TextReaders.
//Below we convert the strings into UTF8 byte array and wrap those in MemoryStreams
using (var msCss = new MemoryStream(System.Text.Encoding.UTF8.GetBytes(example_css))) {
using (var msHtml = new MemoryStream(System.Text.Encoding.UTF8.GetBytes(example_html))) {
//Parse the HTML
iTextSharp.tool.xml.XMLWorkerHelper.GetInstance().ParseXHtml(writer, doc, msHtml, msCss);
}
}
doc.Close();
}
}
//After all of the PDF "stuff" above is done and closed but **before** we
//close the MemoryStream, grab all of the active bytes from the stream
bytes = ms.ToArray();
}
//Now we just need to do something with those bytes.
//Here I'm writing them to disk but if you were in ASP.Net you might Response.BinaryWrite() them.
//You could also write the bytes to a database in a varbinary() column (but please don't) or you
//could pass them to another function for further PDF processing.
var testFile = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.Desktop), "test.pdf");
System.IO.File.WriteAllBytes(testFile, bytes);
2017's update
There are good news for HTML-to-PDF demands. As this answer showed, the W3C standard css-break-3 will solve the problem... It is a Candidate Recommendation with plan to turn into definitive Recommendation this year, after tests.
As not-so-standard there are solutions, with plugins for C#, as showed by print-css.rocks.
As of 2018, there is also iText7 (A next iteration of old iTextSharp library) and its HTML to PDF package available: itext7.pdfhtml
Usage is straightforward:
HtmlConverter.ConvertToPdf(
new FileInfo(#"Path\to\Html\File.html"),
new FileInfo(#"Path\to\Pdf\File.pdf")
);
Method has many more overloads.
Update: iText* family of products has dual licensing model: free for open source, paid for commercial use.
#Chris Haas has explained very well how to use itextSharp to convert HTML to PDF, very helpful
my add is:
By using HtmlTextWriter I put html tags inside HTML table + inline CSS i got my PDF as I wanted without using XMLWorker .
Edit: adding sample code:
ASPX page:
<asp:Panel runat="server" ID="PendingOrdersPanel">
<!-- to be shown on PDF-->
<table style="border-spacing: 0;border-collapse: collapse;width:100%;display:none;" >
<tr><td><img src="abc.com/webimages/logo1.png" style="display: none;" width="230" /></td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla.</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla.</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:11px;color:#10466E;padding:0px;text-align:center;"><i>blablabla</i> Pending orders report<br /></td></tr>
</table>
<asp:GridView runat="server" ID="PendingOrdersGV" RowStyle-Wrap="false" AllowPaging="true" PageSize="10" Width="100%" CssClass="Grid" AlternatingRowStyle-CssClass="alt" AutoGenerateColumns="false"
PagerStyle-CssClass="pgr" HeaderStyle-ForeColor="White" PagerStyle-HorizontalAlign="Center" HeaderStyle-HorizontalAlign="Center" RowStyle-HorizontalAlign="Center" DataKeyNames="Document#"
OnPageIndexChanging="PendingOrdersGV_PageIndexChanging" OnRowDataBound="PendingOrdersGV_RowDataBound" OnRowCommand="PendingOrdersGV_RowCommand">
<EmptyDataTemplate><div style="text-align:center;">no records found</div></EmptyDataTemplate>
<Columns>
<asp:ButtonField CommandName="PendingOrders_Details" DataTextField="Document#" HeaderText="Document #" SortExpression="Document#" ItemStyle-ForeColor="Black" ItemStyle-Font-Underline="true"/>
<asp:BoundField DataField="Order#" HeaderText="order #" SortExpression="Order#"/>
<asp:BoundField DataField="Order Date" HeaderText="Order Date" SortExpression="Order Date" DataFormatString="{0:d}"></asp:BoundField>
<asp:BoundField DataField="Status" HeaderText="Status" SortExpression="Status"></asp:BoundField>
<asp:BoundField DataField="Amount" HeaderText="Amount" SortExpression="Amount" DataFormatString="{0:C2}"></asp:BoundField>
</Columns>
</asp:GridView>
</asp:Panel>
C# code:
protected void PendingOrdersPDF_Click(object sender, EventArgs e)
{
if (PendingOrdersGV.Rows.Count > 0)
{
//to allow paging=false & change style.
PendingOrdersGV.HeaderStyle.ForeColor = System.Drawing.Color.Black;
PendingOrdersGV.BorderColor = Color.Gray;
PendingOrdersGV.Font.Name = "Tahoma";
PendingOrdersGV.DataSource = clsBP.get_PendingOrders(lbl_BP_Id.Text);
PendingOrdersGV.AllowPaging = false;
PendingOrdersGV.Columns[0].Visible = false; //export won't work if there's a link in the gridview
PendingOrdersGV.DataBind();
//to PDF code --Sam
string attachment = "attachment; filename=report.pdf";
Response.ClearContent();
Response.AddHeader("content-disposition", attachment);
Response.ContentType = "application/pdf";
StringWriter stw = new StringWriter();
HtmlTextWriter htextw = new HtmlTextWriter(stw);
htextw.AddStyleAttribute("font-size", "8pt");
htextw.AddStyleAttribute("color", "Grey");
PendingOrdersPanel.RenderControl(htextw); //Name of the Panel
Document document = new Document();
document = new Document(PageSize.A4, 5, 5, 15, 5);
FontFactory.GetFont("Tahoma", 50, iTextSharp.text.BaseColor.BLUE);
PdfWriter.GetInstance(document, Response.OutputStream);
document.Open();
StringReader str = new StringReader(stw.ToString());
HTMLWorker htmlworker = new HTMLWorker(document);
htmlworker.Parse(str);
document.Close();
Response.Write(document);
}
}
of course include iTextSharp Refrences to cs file
using iTextSharp.text;
using iTextSharp.text.pdf;
using iTextSharp.text.html.simpleparser;
using iTextSharp.tool.xml;
Hope this helps!
Thank you
I use the following code to create PDF
protected void CreatePDF(Stream stream)
{
using (var document = new Document(PageSize.A4, 40, 40, 40, 30))
{
var writer = PdfWriter.GetInstance(document, stream);
writer.PageEvent = new ITextEvents();
document.Open();
// instantiate custom tag processor and add to `HtmlPipelineContext`.
var tagProcessorFactory = Tags.GetHtmlTagProcessorFactory();
tagProcessorFactory.AddProcessor(
new TableProcessor(),
new string[] { HTML.Tag.TABLE }
);
//Register Fonts.
XMLWorkerFontProvider fontProvider = new XMLWorkerFontProvider(XMLWorkerFontProvider.DONTLOOKFORFONTS);
fontProvider.Register(HttpContext.Current.Server.MapPath("~/Content/Fonts/GothamRounded-Medium.ttf"), "Gotham Rounded Medium");
CssAppliers cssAppliers = new CssAppliersImpl(fontProvider);
var htmlPipelineContext = new HtmlPipelineContext(cssAppliers);
htmlPipelineContext.SetTagFactory(tagProcessorFactory);
var pdfWriterPipeline = new PdfWriterPipeline(document, writer);
var htmlPipeline = new HtmlPipeline(htmlPipelineContext, pdfWriterPipeline);
// get an ICssResolver and add the custom CSS
var cssResolver = XMLWorkerHelper.GetInstance().GetDefaultCssResolver(true);
cssResolver.AddCss(CSSSource, "utf-8", true);
var cssResolverPipeline = new CssResolverPipeline(
cssResolver, htmlPipeline
);
var worker = new XMLWorker(cssResolverPipeline, true);
var parser = new XMLParser(worker);
using (var stringReader = new StringReader(HTMLSource))
{
parser.Parse(stringReader);
document.Close();
HttpContext.Current.Response.ContentType = "application /pdf";
if (base.View)
HttpContext.Current.Response.AddHeader("content-disposition", "inline;filename=\"" + OutputFileName + ".pdf\"");
else
HttpContext.Current.Response.AddHeader("content-disposition", "attachment;filename=\"" + OutputFileName + ".pdf\"");
HttpContext.Current.Response.Cache.SetCacheability(HttpCacheability.NoCache);
HttpContext.Current.Response.WriteFile(OutputPath);
HttpContext.Current.Response.End();
}
}
}
Here's the link I used as a guide. Hope this helps!
Converting HTML to PDF using ITextSharp
protected void Page_Load(object sender, EventArgs e)
{
try
{
string strHtml = string.Empty;
//HTML File path -http://aspnettutorialonline.blogspot.com/
string htmlFileName = Server.MapPath("~") + "\\files\\" + "ConvertHTMLToPDF.htm";
//pdf file path. -http://aspnettutorialonline.blogspot.com/
string pdfFileName = Request.PhysicalApplicationPath + "\\files\\" + "ConvertHTMLToPDF.pdf";
//reading html code from html file
FileStream fsHTMLDocument = new FileStream(htmlFileName, FileMode.Open, FileAccess.Read);
StreamReader srHTMLDocument = new StreamReader(fsHTMLDocument);
strHtml = srHTMLDocument.ReadToEnd();
srHTMLDocument.Close();
strHtml = strHtml.Replace("\r\n", "");
strHtml = strHtml.Replace("\0", "");
CreatePDFFromHTMLFile(strHtml, pdfFileName);
Response.Write("pdf creation successfully with password -http://aspnettutorialonline.blogspot.com/");
}
catch (Exception ex)
{
Response.Write(ex.Message);
}
}
public void CreatePDFFromHTMLFile(string HtmlStream, string FileName)
{
try
{
object TargetFile = FileName;
string ModifiedFileName = string.Empty;
string FinalFileName = string.Empty;
/* To add a Password to PDF -http://aspnettutorialonline.blogspot.com/ */
TestPDF.HtmlToPdfBuilder builder = new TestPDF.HtmlToPdfBuilder(iTextSharp.text.PageSize.A4);
TestPDF.HtmlPdfPage first = builder.AddPage();
first.AppendHtml(HtmlStream);
byte[] file = builder.RenderPdf();
File.WriteAllBytes(TargetFile.ToString(), file);
iTextSharp.text.pdf.PdfReader reader = new iTextSharp.text.pdf.PdfReader(TargetFile.ToString());
ModifiedFileName = TargetFile.ToString();
ModifiedFileName = ModifiedFileName.Insert(ModifiedFileName.Length - 4, "1");
string password = "password";
iTextSharp.text.pdf.PdfEncryptor.Encrypt(reader, new FileStream(ModifiedFileName, FileMode.Append), iTextSharp.text.pdf.PdfWriter.STRENGTH128BITS, password, "", iTextSharp.text.pdf.PdfWriter.AllowPrinting);
//http://aspnettutorialonline.blogspot.com/
reader.Close();
if (File.Exists(TargetFile.ToString()))
File.Delete(TargetFile.ToString());
FinalFileName = ModifiedFileName.Remove(ModifiedFileName.Length - 5, 1);
File.Copy(ModifiedFileName, FinalFileName);
if (File.Exists(ModifiedFileName))
File.Delete(ModifiedFileName);
}
catch (Exception ex)
{
throw ex;
}
}
You can download the sample file. Just place the html you want to convert in the files folder and run. It will automatically generate the pdf file and place it in the same folder. But in your case, you can specify your html path in the htmlFileName variable.
I want to convert the below HTML to PDF using iTextSharp but don't know where to start:
<style>
.headline{font-size:200%}
</style>
<p>
This <em>is </em>
<span class="headline" style="text-decoration: underline;">some</span>
<strong>sample<em> text</em></strong>
<span style="color: red;">!!!</span>
</p>
First, HTML and PDF are not related although they were created around the same time. HTML is intended to convey higher level information such as paragraphs and tables. Although there are methods to control it, it is ultimately up to the browser to draw these higher level concepts. PDF is intended to convey documents and the documents must "look" the same wherever they are rendered.
In an HTML document you might have a paragraph that's 100% wide and depending on the width of your monitor it might take 2 lines or 10 lines and when you print it it might be 7 lines and when you look at it on your phone it might take 20 lines. A PDF file, however, must be independent of the rendering device, so regardless of your screen size it must always render exactly the same.
Because of the musts above, PDF doesn't support abstract things like "tables" or "paragraphs". There are three basic things that PDF supports: text, lines/shapes and images. (There are other things like annotations and movies but I'm trying to keep it simple here.) In a PDF you don't say "here's a paragraph, browser do your thing!". Instead you say, "draw this text at this exact X,Y location using this exact font and don't worry, I've previously calculated the width of the text so I know it will all fit on this line". You also don't say "here's a table" but instead you say "draw this text at this exact location and then draw a rectangle at this other exact location that I've previously calculated so I know it will appear to be around the text".
Second, iText and iTextSharp parse HTML and CSS. That's it. ASP.Net, MVC, Razor, Struts, Spring, etc, are all HTML frameworks but iText/iTextSharp is 100% unaware of them. Same with DataGridViews, Repeaters, Templates, Views, etc. which are all framework-specific abstractions. It is your responsibility to get the HTML from your choice of framework, iText won't help you. If you get an exception saying The document has no pages or you think that "iText isn't parsing my HTML" it is almost definite that you don't actually have HTML, you only think you do.
Third, the built-in class that's been around for years is the HTMLWorker however this has been replaced with XMLWorker (Java / .Net). Zero work is being done on HTMLWorker which doesn't support CSS files and has only limited support for the most basic CSS properties and actually breaks on certain tags. If you do not see the HTML attribute or CSS property and value in this file then it probably isn't supported by HTMLWorker. XMLWorker can be more complicated sometimes but those complications also make it more extensible.
Below is C# code that shows how to parse HTML tags into iText abstractions that get automatically added to the document that you are working on. C# and Java are very similar so it should be relatively easy to convert this. Example #1 uses the built-in HTMLWorker to parse the HTML string. Since only inline styles are supported the class="headline" gets ignored but everything else should actually work. Example #2 is the same as the first except it uses XMLWorker instead. Example #3 also parses the simple CSS example.
//Create a byte array that will eventually hold our final PDF
Byte[] bytes;
//Boilerplate iTextSharp setup here
//Create a stream that we can write to, in this case a MemoryStream
using (var ms = new MemoryStream()) {
//Create an iTextSharp Document which is an abstraction of a PDF but **NOT** a PDF
using (var doc = new Document()) {
//Create a writer that's bound to our PDF abstraction and our stream
using (var writer = PdfWriter.GetInstance(doc, ms)) {
//Open the document for writing
doc.Open();
//Our sample HTML and CSS
var example_html = #"<p>This <em>is </em><span class=""headline"" style=""text-decoration: underline;"">some</span> <strong>sample <em> text</em></strong><span style=""color: red;"">!!!</span></p>";
var example_css = #".headline{font-size:200%}";
/**************************************************
* Example #1 *
* *
* Use the built-in HTMLWorker to parse the HTML. *
* Only inline CSS is supported. *
* ************************************************/
//Create a new HTMLWorker bound to our document
using (var htmlWorker = new iTextSharp.text.html.simpleparser.HTMLWorker(doc)) {
//HTMLWorker doesn't read a string directly but instead needs a TextReader (which StringReader subclasses)
using (var sr = new StringReader(example_html)) {
//Parse the HTML
htmlWorker.Parse(sr);
}
}
/**************************************************
* Example #2 *
* *
* Use the XMLWorker to parse the HTML. *
* Only inline CSS and absolutely linked *
* CSS is supported *
* ************************************************/
//XMLWorker also reads from a TextReader and not directly from a string
using (var srHtml = new StringReader(example_html)) {
//Parse the HTML
iTextSharp.tool.xml.XMLWorkerHelper.GetInstance().ParseXHtml(writer, doc, srHtml);
}
/**************************************************
* Example #3 *
* *
* Use the XMLWorker to parse HTML and CSS *
* ************************************************/
//In order to read CSS as a string we need to switch to a different constructor
//that takes Streams instead of TextReaders.
//Below we convert the strings into UTF8 byte array and wrap those in MemoryStreams
using (var msCss = new MemoryStream(System.Text.Encoding.UTF8.GetBytes(example_css))) {
using (var msHtml = new MemoryStream(System.Text.Encoding.UTF8.GetBytes(example_html))) {
//Parse the HTML
iTextSharp.tool.xml.XMLWorkerHelper.GetInstance().ParseXHtml(writer, doc, msHtml, msCss);
}
}
doc.Close();
}
}
//After all of the PDF "stuff" above is done and closed but **before** we
//close the MemoryStream, grab all of the active bytes from the stream
bytes = ms.ToArray();
}
//Now we just need to do something with those bytes.
//Here I'm writing them to disk but if you were in ASP.Net you might Response.BinaryWrite() them.
//You could also write the bytes to a database in a varbinary() column (but please don't) or you
//could pass them to another function for further PDF processing.
var testFile = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.Desktop), "test.pdf");
System.IO.File.WriteAllBytes(testFile, bytes);
2017's update
There are good news for HTML-to-PDF demands. As this answer showed, the W3C standard css-break-3 will solve the problem... It is a Candidate Recommendation with plan to turn into definitive Recommendation this year, after tests.
As not-so-standard there are solutions, with plugins for C#, as showed by print-css.rocks.
As of 2018, there is also iText7 (A next iteration of old iTextSharp library) and its HTML to PDF package available: itext7.pdfhtml
Usage is straightforward:
HtmlConverter.ConvertToPdf(
new FileInfo(#"Path\to\Html\File.html"),
new FileInfo(#"Path\to\Pdf\File.pdf")
);
Method has many more overloads.
Update: iText* family of products has dual licensing model: free for open source, paid for commercial use.
#Chris Haas has explained very well how to use itextSharp to convert HTML to PDF, very helpful
my add is:
By using HtmlTextWriter I put html tags inside HTML table + inline CSS i got my PDF as I wanted without using XMLWorker .
Edit: adding sample code:
ASPX page:
<asp:Panel runat="server" ID="PendingOrdersPanel">
<!-- to be shown on PDF-->
<table style="border-spacing: 0;border-collapse: collapse;width:100%;display:none;" >
<tr><td><img src="abc.com/webimages/logo1.png" style="display: none;" width="230" /></td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla.</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla.</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:11px;color:#10466E;padding:0px;text-align:center;"><i>blablabla</i> Pending orders report<br /></td></tr>
</table>
<asp:GridView runat="server" ID="PendingOrdersGV" RowStyle-Wrap="false" AllowPaging="true" PageSize="10" Width="100%" CssClass="Grid" AlternatingRowStyle-CssClass="alt" AutoGenerateColumns="false"
PagerStyle-CssClass="pgr" HeaderStyle-ForeColor="White" PagerStyle-HorizontalAlign="Center" HeaderStyle-HorizontalAlign="Center" RowStyle-HorizontalAlign="Center" DataKeyNames="Document#"
OnPageIndexChanging="PendingOrdersGV_PageIndexChanging" OnRowDataBound="PendingOrdersGV_RowDataBound" OnRowCommand="PendingOrdersGV_RowCommand">
<EmptyDataTemplate><div style="text-align:center;">no records found</div></EmptyDataTemplate>
<Columns>
<asp:ButtonField CommandName="PendingOrders_Details" DataTextField="Document#" HeaderText="Document #" SortExpression="Document#" ItemStyle-ForeColor="Black" ItemStyle-Font-Underline="true"/>
<asp:BoundField DataField="Order#" HeaderText="order #" SortExpression="Order#"/>
<asp:BoundField DataField="Order Date" HeaderText="Order Date" SortExpression="Order Date" DataFormatString="{0:d}"></asp:BoundField>
<asp:BoundField DataField="Status" HeaderText="Status" SortExpression="Status"></asp:BoundField>
<asp:BoundField DataField="Amount" HeaderText="Amount" SortExpression="Amount" DataFormatString="{0:C2}"></asp:BoundField>
</Columns>
</asp:GridView>
</asp:Panel>
C# code:
protected void PendingOrdersPDF_Click(object sender, EventArgs e)
{
if (PendingOrdersGV.Rows.Count > 0)
{
//to allow paging=false & change style.
PendingOrdersGV.HeaderStyle.ForeColor = System.Drawing.Color.Black;
PendingOrdersGV.BorderColor = Color.Gray;
PendingOrdersGV.Font.Name = "Tahoma";
PendingOrdersGV.DataSource = clsBP.get_PendingOrders(lbl_BP_Id.Text);
PendingOrdersGV.AllowPaging = false;
PendingOrdersGV.Columns[0].Visible = false; //export won't work if there's a link in the gridview
PendingOrdersGV.DataBind();
//to PDF code --Sam
string attachment = "attachment; filename=report.pdf";
Response.ClearContent();
Response.AddHeader("content-disposition", attachment);
Response.ContentType = "application/pdf";
StringWriter stw = new StringWriter();
HtmlTextWriter htextw = new HtmlTextWriter(stw);
htextw.AddStyleAttribute("font-size", "8pt");
htextw.AddStyleAttribute("color", "Grey");
PendingOrdersPanel.RenderControl(htextw); //Name of the Panel
Document document = new Document();
document = new Document(PageSize.A4, 5, 5, 15, 5);
FontFactory.GetFont("Tahoma", 50, iTextSharp.text.BaseColor.BLUE);
PdfWriter.GetInstance(document, Response.OutputStream);
document.Open();
StringReader str = new StringReader(stw.ToString());
HTMLWorker htmlworker = new HTMLWorker(document);
htmlworker.Parse(str);
document.Close();
Response.Write(document);
}
}
of course include iTextSharp Refrences to cs file
using iTextSharp.text;
using iTextSharp.text.pdf;
using iTextSharp.text.html.simpleparser;
using iTextSharp.tool.xml;
Hope this helps!
Thank you
I use the following code to create PDF
protected void CreatePDF(Stream stream)
{
using (var document = new Document(PageSize.A4, 40, 40, 40, 30))
{
var writer = PdfWriter.GetInstance(document, stream);
writer.PageEvent = new ITextEvents();
document.Open();
// instantiate custom tag processor and add to `HtmlPipelineContext`.
var tagProcessorFactory = Tags.GetHtmlTagProcessorFactory();
tagProcessorFactory.AddProcessor(
new TableProcessor(),
new string[] { HTML.Tag.TABLE }
);
//Register Fonts.
XMLWorkerFontProvider fontProvider = new XMLWorkerFontProvider(XMLWorkerFontProvider.DONTLOOKFORFONTS);
fontProvider.Register(HttpContext.Current.Server.MapPath("~/Content/Fonts/GothamRounded-Medium.ttf"), "Gotham Rounded Medium");
CssAppliers cssAppliers = new CssAppliersImpl(fontProvider);
var htmlPipelineContext = new HtmlPipelineContext(cssAppliers);
htmlPipelineContext.SetTagFactory(tagProcessorFactory);
var pdfWriterPipeline = new PdfWriterPipeline(document, writer);
var htmlPipeline = new HtmlPipeline(htmlPipelineContext, pdfWriterPipeline);
// get an ICssResolver and add the custom CSS
var cssResolver = XMLWorkerHelper.GetInstance().GetDefaultCssResolver(true);
cssResolver.AddCss(CSSSource, "utf-8", true);
var cssResolverPipeline = new CssResolverPipeline(
cssResolver, htmlPipeline
);
var worker = new XMLWorker(cssResolverPipeline, true);
var parser = new XMLParser(worker);
using (var stringReader = new StringReader(HTMLSource))
{
parser.Parse(stringReader);
document.Close();
HttpContext.Current.Response.ContentType = "application /pdf";
if (base.View)
HttpContext.Current.Response.AddHeader("content-disposition", "inline;filename=\"" + OutputFileName + ".pdf\"");
else
HttpContext.Current.Response.AddHeader("content-disposition", "attachment;filename=\"" + OutputFileName + ".pdf\"");
HttpContext.Current.Response.Cache.SetCacheability(HttpCacheability.NoCache);
HttpContext.Current.Response.WriteFile(OutputPath);
HttpContext.Current.Response.End();
}
}
}
Here's the link I used as a guide. Hope this helps!
Converting HTML to PDF using ITextSharp
protected void Page_Load(object sender, EventArgs e)
{
try
{
string strHtml = string.Empty;
//HTML File path -http://aspnettutorialonline.blogspot.com/
string htmlFileName = Server.MapPath("~") + "\\files\\" + "ConvertHTMLToPDF.htm";
//pdf file path. -http://aspnettutorialonline.blogspot.com/
string pdfFileName = Request.PhysicalApplicationPath + "\\files\\" + "ConvertHTMLToPDF.pdf";
//reading html code from html file
FileStream fsHTMLDocument = new FileStream(htmlFileName, FileMode.Open, FileAccess.Read);
StreamReader srHTMLDocument = new StreamReader(fsHTMLDocument);
strHtml = srHTMLDocument.ReadToEnd();
srHTMLDocument.Close();
strHtml = strHtml.Replace("\r\n", "");
strHtml = strHtml.Replace("\0", "");
CreatePDFFromHTMLFile(strHtml, pdfFileName);
Response.Write("pdf creation successfully with password -http://aspnettutorialonline.blogspot.com/");
}
catch (Exception ex)
{
Response.Write(ex.Message);
}
}
public void CreatePDFFromHTMLFile(string HtmlStream, string FileName)
{
try
{
object TargetFile = FileName;
string ModifiedFileName = string.Empty;
string FinalFileName = string.Empty;
/* To add a Password to PDF -http://aspnettutorialonline.blogspot.com/ */
TestPDF.HtmlToPdfBuilder builder = new TestPDF.HtmlToPdfBuilder(iTextSharp.text.PageSize.A4);
TestPDF.HtmlPdfPage first = builder.AddPage();
first.AppendHtml(HtmlStream);
byte[] file = builder.RenderPdf();
File.WriteAllBytes(TargetFile.ToString(), file);
iTextSharp.text.pdf.PdfReader reader = new iTextSharp.text.pdf.PdfReader(TargetFile.ToString());
ModifiedFileName = TargetFile.ToString();
ModifiedFileName = ModifiedFileName.Insert(ModifiedFileName.Length - 4, "1");
string password = "password";
iTextSharp.text.pdf.PdfEncryptor.Encrypt(reader, new FileStream(ModifiedFileName, FileMode.Append), iTextSharp.text.pdf.PdfWriter.STRENGTH128BITS, password, "", iTextSharp.text.pdf.PdfWriter.AllowPrinting);
//http://aspnettutorialonline.blogspot.com/
reader.Close();
if (File.Exists(TargetFile.ToString()))
File.Delete(TargetFile.ToString());
FinalFileName = ModifiedFileName.Remove(ModifiedFileName.Length - 5, 1);
File.Copy(ModifiedFileName, FinalFileName);
if (File.Exists(ModifiedFileName))
File.Delete(ModifiedFileName);
}
catch (Exception ex)
{
throw ex;
}
}
You can download the sample file. Just place the html you want to convert in the files folder and run. It will automatically generate the pdf file and place it in the same folder. But in your case, you can specify your html path in the htmlFileName variable.
I want to convert the below HTML to PDF using iTextSharp but don't know where to start:
<style>
.headline{font-size:200%}
</style>
<p>
This <em>is </em>
<span class="headline" style="text-decoration: underline;">some</span>
<strong>sample<em> text</em></strong>
<span style="color: red;">!!!</span>
</p>
First, HTML and PDF are not related although they were created around the same time. HTML is intended to convey higher level information such as paragraphs and tables. Although there are methods to control it, it is ultimately up to the browser to draw these higher level concepts. PDF is intended to convey documents and the documents must "look" the same wherever they are rendered.
In an HTML document you might have a paragraph that's 100% wide and depending on the width of your monitor it might take 2 lines or 10 lines and when you print it it might be 7 lines and when you look at it on your phone it might take 20 lines. A PDF file, however, must be independent of the rendering device, so regardless of your screen size it must always render exactly the same.
Because of the musts above, PDF doesn't support abstract things like "tables" or "paragraphs". There are three basic things that PDF supports: text, lines/shapes and images. (There are other things like annotations and movies but I'm trying to keep it simple here.) In a PDF you don't say "here's a paragraph, browser do your thing!". Instead you say, "draw this text at this exact X,Y location using this exact font and don't worry, I've previously calculated the width of the text so I know it will all fit on this line". You also don't say "here's a table" but instead you say "draw this text at this exact location and then draw a rectangle at this other exact location that I've previously calculated so I know it will appear to be around the text".
Second, iText and iTextSharp parse HTML and CSS. That's it. ASP.Net, MVC, Razor, Struts, Spring, etc, are all HTML frameworks but iText/iTextSharp is 100% unaware of them. Same with DataGridViews, Repeaters, Templates, Views, etc. which are all framework-specific abstractions. It is your responsibility to get the HTML from your choice of framework, iText won't help you. If you get an exception saying The document has no pages or you think that "iText isn't parsing my HTML" it is almost definite that you don't actually have HTML, you only think you do.
Third, the built-in class that's been around for years is the HTMLWorker however this has been replaced with XMLWorker (Java / .Net). Zero work is being done on HTMLWorker which doesn't support CSS files and has only limited support for the most basic CSS properties and actually breaks on certain tags. If you do not see the HTML attribute or CSS property and value in this file then it probably isn't supported by HTMLWorker. XMLWorker can be more complicated sometimes but those complications also make it more extensible.
Below is C# code that shows how to parse HTML tags into iText abstractions that get automatically added to the document that you are working on. C# and Java are very similar so it should be relatively easy to convert this. Example #1 uses the built-in HTMLWorker to parse the HTML string. Since only inline styles are supported the class="headline" gets ignored but everything else should actually work. Example #2 is the same as the first except it uses XMLWorker instead. Example #3 also parses the simple CSS example.
//Create a byte array that will eventually hold our final PDF
Byte[] bytes;
//Boilerplate iTextSharp setup here
//Create a stream that we can write to, in this case a MemoryStream
using (var ms = new MemoryStream()) {
//Create an iTextSharp Document which is an abstraction of a PDF but **NOT** a PDF
using (var doc = new Document()) {
//Create a writer that's bound to our PDF abstraction and our stream
using (var writer = PdfWriter.GetInstance(doc, ms)) {
//Open the document for writing
doc.Open();
//Our sample HTML and CSS
var example_html = #"<p>This <em>is </em><span class=""headline"" style=""text-decoration: underline;"">some</span> <strong>sample <em> text</em></strong><span style=""color: red;"">!!!</span></p>";
var example_css = #".headline{font-size:200%}";
/**************************************************
* Example #1 *
* *
* Use the built-in HTMLWorker to parse the HTML. *
* Only inline CSS is supported. *
* ************************************************/
//Create a new HTMLWorker bound to our document
using (var htmlWorker = new iTextSharp.text.html.simpleparser.HTMLWorker(doc)) {
//HTMLWorker doesn't read a string directly but instead needs a TextReader (which StringReader subclasses)
using (var sr = new StringReader(example_html)) {
//Parse the HTML
htmlWorker.Parse(sr);
}
}
/**************************************************
* Example #2 *
* *
* Use the XMLWorker to parse the HTML. *
* Only inline CSS and absolutely linked *
* CSS is supported *
* ************************************************/
//XMLWorker also reads from a TextReader and not directly from a string
using (var srHtml = new StringReader(example_html)) {
//Parse the HTML
iTextSharp.tool.xml.XMLWorkerHelper.GetInstance().ParseXHtml(writer, doc, srHtml);
}
/**************************************************
* Example #3 *
* *
* Use the XMLWorker to parse HTML and CSS *
* ************************************************/
//In order to read CSS as a string we need to switch to a different constructor
//that takes Streams instead of TextReaders.
//Below we convert the strings into UTF8 byte array and wrap those in MemoryStreams
using (var msCss = new MemoryStream(System.Text.Encoding.UTF8.GetBytes(example_css))) {
using (var msHtml = new MemoryStream(System.Text.Encoding.UTF8.GetBytes(example_html))) {
//Parse the HTML
iTextSharp.tool.xml.XMLWorkerHelper.GetInstance().ParseXHtml(writer, doc, msHtml, msCss);
}
}
doc.Close();
}
}
//After all of the PDF "stuff" above is done and closed but **before** we
//close the MemoryStream, grab all of the active bytes from the stream
bytes = ms.ToArray();
}
//Now we just need to do something with those bytes.
//Here I'm writing them to disk but if you were in ASP.Net you might Response.BinaryWrite() them.
//You could also write the bytes to a database in a varbinary() column (but please don't) or you
//could pass them to another function for further PDF processing.
var testFile = Path.Combine(Environment.GetFolderPath(Environment.SpecialFolder.Desktop), "test.pdf");
System.IO.File.WriteAllBytes(testFile, bytes);
2017's update
There are good news for HTML-to-PDF demands. As this answer showed, the W3C standard css-break-3 will solve the problem... It is a Candidate Recommendation with plan to turn into definitive Recommendation this year, after tests.
As not-so-standard there are solutions, with plugins for C#, as showed by print-css.rocks.
As of 2018, there is also iText7 (A next iteration of old iTextSharp library) and its HTML to PDF package available: itext7.pdfhtml
Usage is straightforward:
HtmlConverter.ConvertToPdf(
new FileInfo(#"Path\to\Html\File.html"),
new FileInfo(#"Path\to\Pdf\File.pdf")
);
Method has many more overloads.
Update: iText* family of products has dual licensing model: free for open source, paid for commercial use.
#Chris Haas has explained very well how to use itextSharp to convert HTML to PDF, very helpful
my add is:
By using HtmlTextWriter I put html tags inside HTML table + inline CSS i got my PDF as I wanted without using XMLWorker .
Edit: adding sample code:
ASPX page:
<asp:Panel runat="server" ID="PendingOrdersPanel">
<!-- to be shown on PDF-->
<table style="border-spacing: 0;border-collapse: collapse;width:100%;display:none;" >
<tr><td><img src="abc.com/webimages/logo1.png" style="display: none;" width="230" /></td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla.</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla.</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:9px;color:#10466E;padding:0px;text-align:right;">blablabla</td></tr>
<tr style="line-height:10px;height:10px;"><td style="display:none;font-size:11px;color:#10466E;padding:0px;text-align:center;"><i>blablabla</i> Pending orders report<br /></td></tr>
</table>
<asp:GridView runat="server" ID="PendingOrdersGV" RowStyle-Wrap="false" AllowPaging="true" PageSize="10" Width="100%" CssClass="Grid" AlternatingRowStyle-CssClass="alt" AutoGenerateColumns="false"
PagerStyle-CssClass="pgr" HeaderStyle-ForeColor="White" PagerStyle-HorizontalAlign="Center" HeaderStyle-HorizontalAlign="Center" RowStyle-HorizontalAlign="Center" DataKeyNames="Document#"
OnPageIndexChanging="PendingOrdersGV_PageIndexChanging" OnRowDataBound="PendingOrdersGV_RowDataBound" OnRowCommand="PendingOrdersGV_RowCommand">
<EmptyDataTemplate><div style="text-align:center;">no records found</div></EmptyDataTemplate>
<Columns>
<asp:ButtonField CommandName="PendingOrders_Details" DataTextField="Document#" HeaderText="Document #" SortExpression="Document#" ItemStyle-ForeColor="Black" ItemStyle-Font-Underline="true"/>
<asp:BoundField DataField="Order#" HeaderText="order #" SortExpression="Order#"/>
<asp:BoundField DataField="Order Date" HeaderText="Order Date" SortExpression="Order Date" DataFormatString="{0:d}"></asp:BoundField>
<asp:BoundField DataField="Status" HeaderText="Status" SortExpression="Status"></asp:BoundField>
<asp:BoundField DataField="Amount" HeaderText="Amount" SortExpression="Amount" DataFormatString="{0:C2}"></asp:BoundField>
</Columns>
</asp:GridView>
</asp:Panel>
C# code:
protected void PendingOrdersPDF_Click(object sender, EventArgs e)
{
if (PendingOrdersGV.Rows.Count > 0)
{
//to allow paging=false & change style.
PendingOrdersGV.HeaderStyle.ForeColor = System.Drawing.Color.Black;
PendingOrdersGV.BorderColor = Color.Gray;
PendingOrdersGV.Font.Name = "Tahoma";
PendingOrdersGV.DataSource = clsBP.get_PendingOrders(lbl_BP_Id.Text);
PendingOrdersGV.AllowPaging = false;
PendingOrdersGV.Columns[0].Visible = false; //export won't work if there's a link in the gridview
PendingOrdersGV.DataBind();
//to PDF code --Sam
string attachment = "attachment; filename=report.pdf";
Response.ClearContent();
Response.AddHeader("content-disposition", attachment);
Response.ContentType = "application/pdf";
StringWriter stw = new StringWriter();
HtmlTextWriter htextw = new HtmlTextWriter(stw);
htextw.AddStyleAttribute("font-size", "8pt");
htextw.AddStyleAttribute("color", "Grey");
PendingOrdersPanel.RenderControl(htextw); //Name of the Panel
Document document = new Document();
document = new Document(PageSize.A4, 5, 5, 15, 5);
FontFactory.GetFont("Tahoma", 50, iTextSharp.text.BaseColor.BLUE);
PdfWriter.GetInstance(document, Response.OutputStream);
document.Open();
StringReader str = new StringReader(stw.ToString());
HTMLWorker htmlworker = new HTMLWorker(document);
htmlworker.Parse(str);
document.Close();
Response.Write(document);
}
}
of course include iTextSharp Refrences to cs file
using iTextSharp.text;
using iTextSharp.text.pdf;
using iTextSharp.text.html.simpleparser;
using iTextSharp.tool.xml;
Hope this helps!
Thank you
I use the following code to create PDF
protected void CreatePDF(Stream stream)
{
using (var document = new Document(PageSize.A4, 40, 40, 40, 30))
{
var writer = PdfWriter.GetInstance(document, stream);
writer.PageEvent = new ITextEvents();
document.Open();
// instantiate custom tag processor and add to `HtmlPipelineContext`.
var tagProcessorFactory = Tags.GetHtmlTagProcessorFactory();
tagProcessorFactory.AddProcessor(
new TableProcessor(),
new string[] { HTML.Tag.TABLE }
);
//Register Fonts.
XMLWorkerFontProvider fontProvider = new XMLWorkerFontProvider(XMLWorkerFontProvider.DONTLOOKFORFONTS);
fontProvider.Register(HttpContext.Current.Server.MapPath("~/Content/Fonts/GothamRounded-Medium.ttf"), "Gotham Rounded Medium");
CssAppliers cssAppliers = new CssAppliersImpl(fontProvider);
var htmlPipelineContext = new HtmlPipelineContext(cssAppliers);
htmlPipelineContext.SetTagFactory(tagProcessorFactory);
var pdfWriterPipeline = new PdfWriterPipeline(document, writer);
var htmlPipeline = new HtmlPipeline(htmlPipelineContext, pdfWriterPipeline);
// get an ICssResolver and add the custom CSS
var cssResolver = XMLWorkerHelper.GetInstance().GetDefaultCssResolver(true);
cssResolver.AddCss(CSSSource, "utf-8", true);
var cssResolverPipeline = new CssResolverPipeline(
cssResolver, htmlPipeline
);
var worker = new XMLWorker(cssResolverPipeline, true);
var parser = new XMLParser(worker);
using (var stringReader = new StringReader(HTMLSource))
{
parser.Parse(stringReader);
document.Close();
HttpContext.Current.Response.ContentType = "application /pdf";
if (base.View)
HttpContext.Current.Response.AddHeader("content-disposition", "inline;filename=\"" + OutputFileName + ".pdf\"");
else
HttpContext.Current.Response.AddHeader("content-disposition", "attachment;filename=\"" + OutputFileName + ".pdf\"");
HttpContext.Current.Response.Cache.SetCacheability(HttpCacheability.NoCache);
HttpContext.Current.Response.WriteFile(OutputPath);
HttpContext.Current.Response.End();
}
}
}
Here's the link I used as a guide. Hope this helps!
Converting HTML to PDF using ITextSharp
protected void Page_Load(object sender, EventArgs e)
{
try
{
string strHtml = string.Empty;
//HTML File path -http://aspnettutorialonline.blogspot.com/
string htmlFileName = Server.MapPath("~") + "\\files\\" + "ConvertHTMLToPDF.htm";
//pdf file path. -http://aspnettutorialonline.blogspot.com/
string pdfFileName = Request.PhysicalApplicationPath + "\\files\\" + "ConvertHTMLToPDF.pdf";
//reading html code from html file
FileStream fsHTMLDocument = new FileStream(htmlFileName, FileMode.Open, FileAccess.Read);
StreamReader srHTMLDocument = new StreamReader(fsHTMLDocument);
strHtml = srHTMLDocument.ReadToEnd();
srHTMLDocument.Close();
strHtml = strHtml.Replace("\r\n", "");
strHtml = strHtml.Replace("\0", "");
CreatePDFFromHTMLFile(strHtml, pdfFileName);
Response.Write("pdf creation successfully with password -http://aspnettutorialonline.blogspot.com/");
}
catch (Exception ex)
{
Response.Write(ex.Message);
}
}
public void CreatePDFFromHTMLFile(string HtmlStream, string FileName)
{
try
{
object TargetFile = FileName;
string ModifiedFileName = string.Empty;
string FinalFileName = string.Empty;
/* To add a Password to PDF -http://aspnettutorialonline.blogspot.com/ */
TestPDF.HtmlToPdfBuilder builder = new TestPDF.HtmlToPdfBuilder(iTextSharp.text.PageSize.A4);
TestPDF.HtmlPdfPage first = builder.AddPage();
first.AppendHtml(HtmlStream);
byte[] file = builder.RenderPdf();
File.WriteAllBytes(TargetFile.ToString(), file);
iTextSharp.text.pdf.PdfReader reader = new iTextSharp.text.pdf.PdfReader(TargetFile.ToString());
ModifiedFileName = TargetFile.ToString();
ModifiedFileName = ModifiedFileName.Insert(ModifiedFileName.Length - 4, "1");
string password = "password";
iTextSharp.text.pdf.PdfEncryptor.Encrypt(reader, new FileStream(ModifiedFileName, FileMode.Append), iTextSharp.text.pdf.PdfWriter.STRENGTH128BITS, password, "", iTextSharp.text.pdf.PdfWriter.AllowPrinting);
//http://aspnettutorialonline.blogspot.com/
reader.Close();
if (File.Exists(TargetFile.ToString()))
File.Delete(TargetFile.ToString());
FinalFileName = ModifiedFileName.Remove(ModifiedFileName.Length - 5, 1);
File.Copy(ModifiedFileName, FinalFileName);
if (File.Exists(ModifiedFileName))
File.Delete(ModifiedFileName);
}
catch (Exception ex)
{
throw ex;
}
}
You can download the sample file. Just place the html you want to convert in the files folder and run. It will automatically generate the pdf file and place it in the same folder. But in your case, you can specify your html path in the htmlFileName variable.