We Keep Coding

string format money , [duplicate]

I need to display a number with commas and a decimal point.
Eg:
Case 1 : Decimal number is 432324 (This does not have commas or decimal points).
Need to display it as: 432,324.00.
Not: 432,324
Case 2 : Decimal number is 2222222.22 (This does not have commas).
Need to display it as: 2,222,222.22
I tried ToString("#,##0.##"), but it is not formatting it correctly.

int number = 1234567890;
number.ToString("#,##0.00");
You will get the result 1,234,567,890.00.

Maybe you simply want the standard format string "N", as in
number.ToString("N")
It will use thousand separators, and a fixed number of fractional decimals. The symbol for thousands separators and the symbol for the decimal point depend on the format provider (typically CultureInfo) you use, as does the number of decimals (which will normally by 2, as you require).
If the format provider specifies a different number of decimals, and if you don't want to change the format provider, you can give the number of decimals after the N, as in .ToString("N2").
Edit: The sizes of the groups between the commas are governed by the
CultureInfo.CurrentCulture.NumberFormat.NumberGroupSizes
array, given that you don't specify a special format provider.

Try with
ToString("#,##0.00")
From MSDN
*The "0" custom format specifier serves as a zero-placeholder symbol. If the value that is being formatted has a digit in the position where the zero appears in the format string, that digit is copied to the result string; otherwise, a zero appears in the result string. The position of the leftmost zero before the decimal point and the rightmost zero after the decimal point determines the range of digits that are always present in the result string.
The "00" specifier causes the value to be rounded to the nearest digit preceding the decimal, where rounding away from zero is always used. For example, formatting 34.5 with "00" would result in the value 35.*

I had the same problem. I wanted to format numbers like the "General" format in spreadsheets, meaning show decimals if they're significant, but chop them off if not. In other words:
1234.56 => 1,234.56
1234 => 1,234
It needs to support a maximum number of places after the decimal, but don't put trailing zeros or dots if not required, and of course, it needs to be culture friendly. I never really figured out a clean way to do it using String.Format alone, but a combination of String.Format and Regex.Replace with some culture help from NumberFormatInfo.CurrentInfo did the job (LinqPad C# Program).
string FormatNumber<T>(T number, int maxDecimals = 4) {
return Regex.Replace(String.Format("{0:n" + maxDecimals + "}", number),
#"[" + System.Globalization.NumberFormatInfo.CurrentInfo.NumberDecimalSeparator + "]?0+$", "");
}
void Main(){
foreach (var test in new[] { 123, 1234, 1234.56, 123456.789, 1234.56789123 } )
Console.WriteLine(test + " = " + FormatNumber(test));
}
Produces:
123 = 123
1234 = 1,234
1234.56 = 1,234.56
123456.789 = 123,456.789
1234.56789123 = 1,234.5679

Try with
ToString("#,##0.###")
Produces:
1234.55678 => 1,234.556
1234 => 1,234

For Razor View:
$#string.Format("{0:#,0.00}",item.TotalAmount)

CultureInfo us = new CultureInfo("en-US");
TotalAmount.ToString("N", us)

Your question is not very clear but this should achieve what you are trying to do:
decimal numericValue = 3494309432324.00m;
string formatted = numericValue.ToString("#,##0.00");
Then formatted will contain: 3,494,309,432,324.00

All that is needed is "#,0.00", c# does the rest.
Num.ToString("#,0.00"")
The "#,0" formats the thousand separators
"0.00" forces two decimal points

If you are using string variables you can format the string directly using a : then specify the format (e.g. N0, P2, etc).
decimal Number = 2000.55512016465m;
$"{Number:N}" #Outputs 2,000.55512016465
You can also specify the number of decimal places to show by adding a number to the end like
$"{Number:N1}" #Outputs 2,000.5
$"{Number:N2}" #Outputs 2,000.55
$"{Number:N3}" #Outputs 2,000.555
$"{Number:N4}" #Outputs 2,000.5551

string Mynewcurrency = DisplayIndianCurrency("7743450.00");
private string DisplayIndianCurrency(string EXruppesformate)
{
string fare = EXruppesformate;
decimal parsed = decimal.Parse(fare, CultureInfo.InvariantCulture);
CultureInfo hindi = new CultureInfo("en-IN");
// string text = string.Format(hindi, "{0:c}", parsed);if you want <b>Rs 77,43,450.00</b>
string text = string.Format(hindi, "{0:N}", parsed); //if you want <b>77,43,450.00</b>
return ruppesformate = text;
}

For anyone looking at this now, and getting the "No overload for method 'ToString' takes 1 argument" when using:
TotalNumber.ToString("N")
My solution has been to use :
TotalNumber.Value.ToString("N")
I often get stuck on this when working directly inside an MVC View, the following wasn't working:
#Model.Sum(x => x.Number).ToString("N")
Whereas this works:
#Model.Sum(x => x.Number).Value.ToString("N")

Issue with parsing and multiplying by 1000 in order to get ms instead of seconds

I'm having an issue after submitting a form with the following error:
Input string was not in a correct format.
My code:
Decimal intervalStart = Decimal.Parse(IntervalTime.Text);
Decimal intervalTotal = intervalStart * 1000;
string interval = intervalTotal.ToString();
I am trying to get a total in whole number rather than decimal, but the decimal is crucial in order to get that whole number (when multiplied by 1000).
For example, my small application reads a video file and puts the total in seconds in the "IntervalTime.Text" box. This is then converted into milliseconds and becomes a whole number.
Video: 87.524 seconds. Multiply it by 1000, you get 87524. <- This is what I need but continue getting the above error.

The Decimal.Parse(String) parse the number which is in this format:
[ws][sign][digits,]digits[.fractional-digits][ws]
Be carefull that
, is a culture-specific thousands separator symbol.
. is a culture-specific decimal point symbol
This means that both 87,524 and 87.524 could be valid decimal number strings depending on the system culture.

This doesn't work:
string b = "87.524";
Decimal intervalStart2 = Decimal.Parse(a);
But this does:
string a = "87,524";
Decimal intervalStart1 = Decimal.Parse(a);
Problem is in delimiter.
One of possible solutions could be:
string b = "87.524";
b = b.Replace(".", ",");
Decimal intervalStart = Decimal.Parse(b);
Also in this question it is shown how to define delimiter yourself:
decimal.Parse("87.524", new NumberFormatInfo() { NumberDecimalSeparator = "." })
Another way is to define specific CultureInfo:
decimal.Parse("87.524", new CultureInfo("en-US"));

C# convert string to decimal 4dp

I need to take a string object and convert it to a decimal to 4 dp.
So for example:
string val = "145.83011";
decimal sss = Math.Round(Convert.ToDecimal(val), 4);
bring back 145.8301 - good
However:
string val = "145.8300";
decimal sss = Math.Round(Convert.ToDecimal(val), 4);
brings back 145.83
I need it to be 145.8300
I need it in a decimal format so can't use string format options.
Thanks
rob

One option would be to use string manipulation three times:
Parse the original text to a decimal value (this will preserve the original number of decimal places)
Use string formatting to end up with a string with exactly 4 decimal places. (Math.Round ensures there are at most 4DP, but not exactly 4DP.)
Parse the result of the formatting to get back to a decimal value with exactly 4DP.
So something like this:
public static decimal Force4DecimalPlaces(string input)
{
decimal parsed = decimal.Parse(input, CultureInfo.InvariantCulture);
string intermediate = parsed.ToString("0.0000", CultureInfo.InvariantCulture);
return decimal.Parse(intermediate, CultureInfo.InvariantCulture);
}
I recoil from using string conversions like this, but the alternatives are relatively tricky. You could either get the raw bits, split out the different parts to find the mantissa and scale, then adjust appropriately... or you could potentially work out some sequence of arithmetic operations to get to the right scale. (Jeppe's approach of multiplying by 1.0000m may well be entirely correct - I just don't know whether it's documented to be correct. It would at least be worth adding in appropriate tests for the sorts of numbers you expect to see.)
Note that the above code will perform round up on halves, as far as I can tell, so 1.12345 will be converted to 1.1235 for example.
Sample with output in comments:
using System;
using System.Globalization;
class Test
{
static void Main()
{
Console.WriteLine(Force4DecimalPlaces("0.0000001")); // 0.0000
Console.WriteLine(Force4DecimalPlaces("1.000000")); // 1.0000
Console.WriteLine(Force4DecimalPlaces("1.5")); // 1.5000
Console.WriteLine(Force4DecimalPlaces("1.56789")); // 1.5679
}
public static decimal Force4DecimalPlaces(string input)
{
decimal parsed = decimal.Parse(input, CultureInfo.InvariantCulture);
string intermediate = parsed.ToString("0.0000", CultureInfo.InvariantCulture);
return decimal.Parse(intermediate, CultureInfo.InvariantCulture);
}
}

Both Convert.ToDecimal and decimal.Parse do preserve trailing zeroes in the string (a System.Decimal can have at most 28-29 digits in total, so in most cases there's still room for all the trailing zeroes).
And Math.Round(..., 4) preserves trailing zeroes up to the fourth place after the decimal period.
Therefore the premise of the question is wrong. Your example does bring back what you want.
In any case, consider specifying the overload that takes in an IFormatProvider as well, and give CultureInfo.InvariantCulture as argument. Then the conversion is independent of the local culture.
If instead you want to handle strings like "145.83" and append trailing zeroes that were not in the string, use:
string val = "145.83";
decimal sss = Math.Round(
decimal.Parse(val, CultureInfo.InvariantCulture) * 1.0000m,
4);
Epilog: If you don't like multiplying and dividing by numbers like 1.0000m, use decimal.GetBits to get the internal representation. Adjust the integer "part" by multiplying or dividing by the appropriate power of ten, and adjust the scale "part" by subtracting or adding the corresponding number. The scale counts the number of places to move the decimal point to the left, starting from the 96-bit integer.

Remove decimal from currency

I am converting data for an export.
The file shows data in cents, not dollars.
So 1234.56 needs to be printed as 123456
Is there a way to do that with string.Format?
Or is the only solution to multiply by 100?

You can use string.Replace(".", string.empty). But that isn't exactly localized. You could add in cases where you check for "," as well for international currency. But that's what I would do.
[Edit]
Also just found this:
http://msdn.microsoft.com/en-us/library/dwhawy9k.aspx
The "N" numeric specifier allows you to change the symbol used to separate whole number and decimal parts.
<code>
decimal num = 123.456m;
NumberFormatInfo ci = CultureInfo.CurrentCulture.NumberFormat;
ci.CurrencyDecimalSeparator = " "; // You can't use string.Empty here, as it throws an exception.
string str = num.ToString("N", ci).Replace(" ", string.Empty);
</code>
Something like that should do the trick, and is localized!

That's a rendering issue. Certainly multiplying by 100 to get cents will do the job.
The United States uses the decimal point to separate dollars from cents. But not all countries do that. Your "multiply by 100" solution is only correct for currencies that use 100 fractional units to represent a single whole. (Not the case in Japan for yen.)

If it is that simple, just do String.Replace('.','');

if you know that the values will always have 2 Decimal Positions then do this it's very simple
var strVar = 1234.56;
var somevalues = string.Format("{0:######}", strVar * 100);
output = 123456

Formatting a double with decimals C#

Is it possible to format a double, so he doesn't chance the text 2140.76 to 214076 but instead letting it be 2140.76?
I can't use ',' for the decimal numbers, since the entire text file that I'm reading are numbers using '.' for separating the decimals, 10000 records, every day, so ...
EDIT:
double natMB = 0;
boolean check = double.TryParse(splitline[8], NumberStyles.AllowDecimalPoint, CultureInfo.InvariantCulture, out natMB);
if (check == false)
{
natMB = 0;
}
else
{
natMB = natMB * 1024;
}
double intMB = 0;
boolean check2 = double.TryParse(splitline[9], NumberStyles.AllowDecimalPoint, CultureInfo.InvariantCulture, out intMB);
if (check2==false)
{
intMB=0;
}
else
{
intMB = intMB * 1024;
}
The 0 value is necessary since I need to enter these values in an SQL statement, and they need to show up as 0, not as null.

Your question is not clear, Do you want to parse a double from a string with dot decimal separator ?
If yes try with this :
double.Parse("2140.76", CultureInfo.InvariantCulture)

You can use the invariant culture to format a number with a decimal period, regardless of your local culture settings:
string formatted = someDouble.ToString(CultureInfo.InvariantCulture);

Start reading here:
http://msdn.microsoft.com/en-us/library/system.globalization.numberformatinfo.aspx
Basically, you create an NumberFormatInfo that you can customise to use with String.Format to use any format you want.

Is it possible to format a double so he doesn't chance the text 2140.76 to 214076 but instead
letting it be 2140.76?
Yes. Let me play ignorant - I have no idea how you can even ask that and have the poroblem given the extensive formatting methods.
I can't use ',' for the decimal numbers, since the entire text file that i'm reading are numbers
using '.' for separating the decimals, 10000 records, every day, so ...
So the problem likely is that you ahve a culture issue at hand and an ignorant developer on the other side. Ignorant because files exchagned should always be english formatted always, to avoid that.
Anyhow, basically:
* Change your culture info in the thread to english or
* Use english culture info for parsing and text generation.
Read the documentation for the methods you use -there areo verlaods that allow you to tune the formatting.