I have an operation on the site that takes crops an image, however the resultant, cropped image is coming out significantly larger in terms of file size (original is 24k and the cropped image is like 650k). So I found that I need to apply some compression to the image before saving it. I came up with the following:
public static System.Drawing.Image CropImage(System.Drawing.Image image, Rectangle cropRectangle, ImageFormat format)
{
var croppedImage = new Bitmap(cropRectangle.Width, cropRectangle.Height);
using (var g = Graphics.FromImage(croppedImage))
{
g.InterpolationMode = InterpolationMode.HighQualityBicubic;
g.DrawImage(
image,
new Rectangle(new Point(0,0), new Size(cropRectangle.Width, cropRectangle.Height)),
cropRectangle,
GraphicsUnit.Pixel);
return CompressImage(croppedImage, format);
}
}
public static System.Drawing.Image CompressImage(System.Drawing.Image image, ImageFormat imageFormat)
{
var bmp = new Bitmap(image);
var codecInfo = EncoderFactory.GetEncoderInfo(imageFormat);
var encoder = System.Drawing.Imaging.Encoder.Quality;
var parameters = new EncoderParameters(1);
var parameter = new EncoderParameter(encoder, 10L);
parameters.Param[0] = parameter;
using (var ms = new MemoryStream())
{
bmp.Save(ms, codecInfo, parameters);
var resultImage = System.Drawing.Image.FromStream(ms);
return resultImage;
}
}
I set the quality low just to see if there was any change at all. There isn't. The crop is being saved correctly appearance-wise but compression is a no joy. If I bypass CompressImage() altogether, neither the file size nor the image quality appear to be any different.
So, 2 questions. Why is nothing happening? Is there a simpler way to compress the resultant image to "web-optimize" similar to how photoshop saves web images (I thought it just stripped a lot of info out of it to reduce the size).
Your problem is you must 'compress' (really encode) the image as you save it, not before you save it. An Image object in your program is always uncompressed.
By saving to the MemoryStream and reading back out from the stream will encode the image and then decode it back to the same size again (with some quality loss in the process if you are using JPEG). However, if you save it to a file with the compression parameters, you will get a compressed image file.
Using this routine with JPEG quality level 90 on a 153 KB source image gives an output image of 102 KB. If you want a smaller file size (with more encoding artifacts) change the encoder parameter to something smaller than 90.
public static void SaveJpegImage(System.Drawing.Image image, string fileName)
{
ImageCodecInfo codecInfo = ImageCodecInfo.GetImageEncoders()
.Where(r => r.CodecName.ToUpperInvariant().Contains("JPEG"))
.Select(r => r).FirstOrDefault();
var encoder = System.Drawing.Imaging.Encoder.Quality;
var parameters = new EncoderParameters(1);
var parameter = new EncoderParameter(encoder, 90L);
parameters.Param[0] = parameter;
using (FileStream fs = new FileStream(fileName, FileMode.Create))
{
image.Save(fs, codecInfo, parameters);
}
}
I believe you shouldn't dispose of the MemoryStream while you are using an image created using Image.FromStream that refers to the stream. Creating a Bitmap directly from the stream also doesn't work.
Try this:
private static Image CropAndCompressImage(Image image, Rectangle rectangle, ImageFormat imageFormat)
{
using(Bitmap bitmap = new Bitmap(image))
{
using(Bitmap cropped = bitmap.Clone(rectangle, bitmap.PixelFormat))
{
using (MemoryStream memoryStream = new MemoryStream())
{
cropped.Save(memoryStream, imageFormat);
return new Bitmap(Image.FromStream(memoryStream));
}
}
}
}
Related
I have svg icon that I am trying to convert to PNG. I am trying to make the PNG 100x100 pixels, but instead of scaling the image to this size, it gets cropped. What I am doing wrong?
using (StreamReader reader = File.OpenText(svgpath))
{
SvgReader svgReader = new SvgReader(reader);
Graphic gr = svgReader.Graphic;
Size size = new Size(100, 100);
var c = PlatformSupport.CreateImageCanvas(size);
gr.Draw(c);
MemoryStream stream = new MemoryStream();
c.GetImage().SaveAsPng(stream);
byte[] fileContent = stream.ToArray();
File.WriteAllBytes(resultPath, fileContent);
}
I have a simple C# script that generates a Bitmap, saves it to the hard drive (PNG), checks the file Size and based on the size of the file it will move or delete the image.
Bitmap bmp = new Bitmap(1024, 768);
bmp.save(#"C:\User\...\image.png");
FileInfo fi = new FileInfo (#"C:\User\...\image.png");
if (fi.length > 50000){
//do Something
}
Is there any other way to get the compressed (RLE) size of the Bitmap without storing it locally?
You can save the image to a MemoryStream instead:
Bitmap bmp = new Bitmap(1024, 768);
using (var ms = new MemoryStream())
{
bmp.Save(ms, ImageFormat.Png);
if (ms.Length > 50000){
//do Something
}
}
Hi I wanna convert binary array to bitmap and show image in a picturebox. I wrote the following code but I got exception that says that the parameter is not valid .
public static Bitmap ByteToImage(byte[] blob)
{
MemoryStream mStream = new MemoryStream();
byte[] pData = blob;
mStream.Write(pData, 0, Convert.ToInt32(pData.Length));
Bitmap bm = new Bitmap(mStream);
mStream.Dispose();
return bm;
}
It really depends on what is in blob. Is it a valid bitmap format (like PNG, BMP, GIF, etc?). If it is raw byte information about the pixels in the bitmap, you can not do it like that.
It may help to rewind the stream to the beginning using mStream.Seek(0, SeekOrigin.Begin) before the line Bitmap bm = new Bitmap(mStream);.
public static Bitmap ByteToImage(byte[] blob)
{
using (MemoryStream mStream = new MemoryStream())
{
mStream.Write(blob, 0, blob.Length);
mStream.Seek(0, SeekOrigin.Begin);
Bitmap bm = new Bitmap(mStream);
return bm;
}
}
Don't dispose of the MemoryStream. It now belongs to the image object and will be disposed when you dispose the image.
Also consider doing it like this
var ms = new MemoryStream(blob);
var img = Image.FromStream(ms);
.....
img.Dispose(); //once you are done with the image.
System.IO.MemoryStream mStrm = new System.IO.MemoryStream(your byte array);
Image im = Image.FromStream(mStrm);
im.Save("image.bmp");
Try this. If you still get any error or exception; please post your bytes which you are trying to convert to image. There should be problem in your image stream....
I'm trying to send a bitmap screenshot over network, so I need to compress it before sending it. Is there a library or method for doing this?
When you save an Image to a stream, you have to select a format. Almost all bitmap formats (bmp, gif, jpg, png) use 1 or more forms of compression. So just select an appropriate format, and make make sure that sender and receiver agree on it.
If you are looking for something to compress the image in quality, here it is-
private Image GetCompressedBitmap(Bitmap bmp, long quality)
{
using (var mss = new MemoryStream())
{
EncoderParameter qualityParam = new EncoderParameter(System.Drawing.Imaging.Encoder.Quality, quality);
ImageCodecInfo imageCodec = ImageCodecInfo.GetImageEncoders().FirstOrDefault(o => o.FormatID == ImageFormat.Jpeg.Guid);
EncoderParameters parameters = new EncoderParameters(1);
parameters.Param[0] = qualityParam;
bmp.Save(mss, imageCodec, parameters);
return Image.FromStream(mss);
}
}
Use it -
var compressedBmp = GetCompressedBitmap(myBmp, 60L);
Try the System.IO.DeflateStream class.
May be you can use:
private Bitmap compressImage(Bitmap image) {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
image.compress(Bitmap.CompressFormat.JPEG, 100, baos);//
int options = 100;
while ( baos.toByteArray().length / 1024>100) { //
baos.reset();
image.compress(Bitmap.CompressFormat.JPEG, options, baos);//
options -= 10;// 10
}
ByteArrayInputStream isBm = new ByteArrayInputStream(baos.toByteArray());//
Bitmap bitmap = BitmapFactory.decodeStream(isBm, null, null);//
return bitmap;
}
Is there any way to convert a bmp image to jpg/png without losing the quality in C#? Using Image class we can convert bmp to jpg but the quality of output image is very poor. Can we gain the quality level as good as an image converted to jpg using photoshop with highest quality?
var qualityEncoder = Encoder.Quality;
var quality = (long)<desired quality>;
var ratio = new EncoderParameter(qualityEncoder, quality );
var codecParams = new EncoderParameters(1);
codecParams.Param[0] = ratio;
var jpegCodecInfo = <one of the codec infos from ImageCodecInfo.GetImageEncoders() with mime type = "image/jpeg">;
bmp.Save(fileName, jpegCodecInfo, codecParams); // Save to JPG
public static class BitmapExtensions
{
public static void SaveJPG100(this Bitmap bmp, string filename)
{
EncoderParameters encoderParameters = new EncoderParameters(1);
encoderParameters.Param[0] = new EncoderParameter(System.Drawing.Imaging.Encoder.Quality, 100L);
bmp.Save(filename, GetEncoder(ImageFormat.Jpeg), encoderParameters);
}
public static void SaveJPG100(this Bitmap bmp, Stream stream)
{
EncoderParameters encoderParameters = new EncoderParameters(1);
encoderParameters.Param[0] = new EncoderParameter(System.Drawing.Imaging.Encoder.Quality, 100L);
bmp.Save(stream, GetEncoder(ImageFormat.Jpeg), encoderParameters);
}
public static ImageCodecInfo GetEncoder(ImageFormat format)
{
ImageCodecInfo[] codecs = ImageCodecInfo.GetImageDecoders();
foreach (ImageCodecInfo codec in codecs)
{
if (codec.FormatID == format.Guid)
{
return codec;
}
}
return null;
}
}
Provided BitmapExtensions by jestro are great, I used them. However would like to show the corrected version - works for Image parent class which is more convenient as I think and provides a way to supply quality:
public static class ImageExtensions
{
public static void SaveJpeg(this Image img, string filePath, long quality)
{
var encoderParameters = new EncoderParameters(1);
encoderParameters.Param[0] = new EncoderParameter(Encoder.Quality, quality);
img.Save(filePath, GetEncoder(ImageFormat.Jpeg), encoderParameters);
}
public static void SaveJpeg(this Image img, Stream stream, long quality)
{
var encoderParameters = new EncoderParameters(1);
encoderParameters.Param[0] = new EncoderParameter(Encoder.Quality, quality);
img.Save(stream, GetEncoder(ImageFormat.Jpeg), encoderParameters);
}
static ImageCodecInfo GetEncoder(ImageFormat format)
{
ImageCodecInfo[] codecs = ImageCodecInfo.GetImageDecoders();
return codecs.Single(codec => codec.FormatID == format.Guid);
}
}
Fundamentally you won't be able to keep the same quality because jpg is (so far as I'm aware) always lossy even with the highest possible quality settings.
If bit-accurate quality is really important, consider using png, which has some modes which are lossless.
Just want to say that JPEG is by nature a lossy format. So in thoery even at the highest settings you are going to have some information loss, but it depends a lot on the image.But png is lossless.
I am working on an expense report app, and I am really pleased with the default quality settings for JPG (and PNG) when saving from a Bitmap object.
https://msdn.microsoft.com/en-us/library/9t4syfhh%28v=vs.110%29.aspx
Bitmap finalBitmap = ....; //from disk or whatever
finalBitmap.Save(xpsFileName + ".final.jpg", ImageFormat.Jpeg);
finalBitmap.Save(xpsFileName + ".final.png", ImageFormat.Png);
I'm on .NET 4.6...perhaps the quality has improved in subsequent framework releases.
You can try:
Bitmap.InterpolationMode = InterpolationMode.HighQualityBicubic;
and
Bitmap.CompositingQuality = CompositingQuality.HighQuality;
Which does keep the quality fairly high, but not the highest possible.