I'm using the following code which is working just fine for most of the services but some time in the URL last I got User;v=2;mp and I need to get just User,how should I handle it?
I need some general solution since I guess in some other URL I can get different spacial charters
if the URL
https://ldmrrt.ct/odata/GBSRM/User;v=2;mp
string serviceName = _uri.Segments.LastOrDefault();
if the URL is https://ldmrrt.ct/odata/GBSRM/User its working fine...
Just replace:
string serviceName = _uri.Segments.LastOrDefault();
With:
string serviceName = _uri.Segments.LastOrDefault().Split(new[]{';'}).First();
If you need something more flexible, where you can specify what characters to include or skip, you could do something like this (slightly messy, you should probably extract parts of this as separate variables, etc):
// Note the _ and - characters in this example:
Uri _uri = new Uri("https://ldmrrt.ct/odata/GBSRM/User_ex1-ex2;v=2;mp");
// This will return a string: "User_ex1-ex2"
string serviceName =
new string(_uri.Segments
.LastOrDefault()
.TakeWhile(c => Char.IsLetterOrDigit(c)
|| (new char[]{'_', '-'}).Contains(c))
.ToArray());
Update, in response to what I understand to be a question below :) :
You could just use a String.Replace() for that, or you could use filtering by doing something like this:
// Will return: "Userexex2v=2mp"
string serviceName =
new string(_uri.Segments
.LastOrDefault()
.Where(c =>
!Char.IsPunctuation(c) // Ignore punctuation
// ..and ignore any "_" or "-":
&& !(new char[]{'_', '-'}).Contains(c))
.ToArray());
If you use this in production, mind you, be sure to clean it up a little, e.g. by splitting into several variables, and defining your char[]-array prior to usage.
In your case you can try to split a "User;v=2;mp" string.
string [] split = words.Split(new Char [] { ';' });
Returns a string array that contains the substrings in this instance that are delimited by elements of a specified Unicode character array.
split.First();
or:
split[0];
Related
So I have this string which I have to trim and manipulate a little with it.
My string example:
string test = "studentName_123.pdf";
Now, what I want to do is somehow extract only the _123 part and at the end I need to have studentName.pdf
What I have tried:
string test_extracted = test.Substring(0, test.LastIndexOf("_") )+".pdf";
This also works but the thing is that I don't want to add the ".pdf" suffix at the end of the string manually because I can have strings that are not pdf, for ex. studentName.docx , studentName.png.
So basically I just want the "_123" part removed but still keep the remain part after that.
I think this might help you:
string test = "studentName_123.pdf";
string test_extracted = test.Substring(0, test.LastIndexOf("_") )+ test.Substring(test.LastIndexOf("."),test.Length - test.LastIndexOf(".") );
Using Remove(int startIndex, int count):
string test = "studentName_123.pdf";
string test_extracted = test.Remove(test.LastIndexOf("_"), test.LastIndexOf(".") - test.LastIndexOf("_"));
Sounds like you mean something like this?
string extension = Path.GetExtension(test);
string pdfName = Path.GetFileNameWithoutExtension(test).Split('_')[0];
string fullName = pdfName + extension;
Since you know what value you will always be replacing in your strings, "_123", to base on your example, just utilize the replace method and replace it with nothing since the method expects two arguments;
string test_extracted = test.replace('_123', '');
This could be solved with a regular expression like this
(\w*)_.*(\.\w*) where the first capture group (\w*) matches everything before the underscore and the second group (\.\w*) matches the file extensions.
Lastly we just have to concat the groups without the stuff inbetween like so:
string test = "studentName_123.pdf";
var regex = Regex.Match(test, #"(\w*)_.*(\.\w*)");
string newString = regex.Groups[1].Value + regex.Groups[2].Value;
I'm currently trying to strip a string of data that is may contain the hyphen symbol.
E.g. Basic logic:
string stringin = "test - 9894"; OR Data could be == "test";
if (string contains a hyphen "-"){
Strip stringin;
output would be "test" deleting from the hyphen.
}
Console.WriteLine(stringin);
The current C# code i'm trying to get to work is shown below:
string Details = "hsh4a - 8989";
var regexItem = new Regex("^[^-]*-?[^-]*$");
string stringin;
stringin = Details.ToString();
if (regexItem.IsMatch(stringin)) {
stringin = stringin.Substring(0, stringin.IndexOf("-") - 1); //Strip from the ending chars and - once - is hit.
}
Details = stringin;
Console.WriteLine(Details);
But pulls in an Error when the string does not contain any hyphen's.
How about just doing this?
stringin.Split('-')[0].Trim();
You could even specify the maximum number of substrings using overloaded Split constructor.
stringin.Split('-', 1)[0].Trim();
Your regex is asking for "zero or one repetition of -", which means that it matches even if your input does NOT contain a hyphen. Thereafter you do this
stringin.Substring(0, stringin.IndexOf("-") - 1)
Which gives an index out of range exception (There is no hyphen to find).
Make a simple change to your regex and it works with or without - ask for "one or more hyphens":
var regexItem = new Regex("^[^-]*-+[^-]*$");
here -------------------------^
It seems that you want the (sub)string starting from the dash ('-') if original one contains '-' or the original string if doesn't have dash.
If it's your case:
String Details = "hsh4a - 8989";
Details = Details.Substring(Details.IndexOf('-') + 1);
I wouldn't use regex for this case if I were you, it makes the solution much more complex than it can be.
For string I am sure will have no more than a couple of dashes I would use this code, because it is one liner and very simple:
string str= entryString.Split(new [] {'-'}, StringSplitOptions.RemoveEmptyEntries)[0];
If you know that a string might contain high amount of dashes, it is not recommended to use this approach - it will create high amount of different strings, although you are looking just for the first one. So, the solution would look like something like this code:
int firstDashIndex = entryString.IndexOf("-");
string str = firstDashIndex > -1? entryString.Substring(0, firstDashIndex) : entryString;
you don't need a regex for this. A simple IndexOf function will give you the index of the hyphen, then you can clean it up from there.
This is also a great place to start writing unit tests as well. They are very good for stuff like this.
Here's what the code could look like :
string inputString = "ho-something";
string outPutString = inputString;
var hyphenIndex = inputString.IndexOf('-');
if (hyphenIndex > -1)
{
outPutString = inputString.Substring(0, hyphenIndex);
}
return outPutString;
I have a URL like the following
http://yellowcpd.testpace.net
How can I get yellowcpd from this? I know I can do that with string parsing, but is there a builtin way in C#?
Assuming your URLs will always be testpace.net, try this:
var subdomain = Request.Url.Host.Replace("testpace.net", "").TrimEnd('.');
It'll just give you the non-testpace.net part of the Host. If you don't have Request.Url.Host, you can do new Uri(myString).Host instead.
try this
string url = Request.Url.AbsolutePath;
var myvalues= url.Split('.');
How can I get yellowcpd from this? I know I can do that with string
parsing, but is there a builtin way in C#?
.Net doesn't provide a built-in feature to extract specific parts from Uri.Host. You will have to use string manipulation or a regular expression yourself.
The only constant part of the domain string is the TLD. The TLD is the very last bit of the domain string, eg .com, .net, .uk etc. Everything else under that depends on the particular TLD for its position (so you can't assume the next to last part is the "domain name" as, for .co.uk it would be .co
This fits the bill.
Split over two lines:
string rawURL = Request.Url.Host;
string domainName = rawURL .Split(new char[] { '.', '.' })[1];
Or over one:
string rawURL = Request.Url.Host.Split(new char[] { '.', '.' })[1];
The simple answer to your question is no there isn't a built in method to extract JUST the sub-domain. With that said this is the solution that I use...
public enum GetSubDomainOption
{
ExcludeWWW,
IncludeWWW
};
public static class Extentions
{
public static string GetSubDomain(this Uri uri,
GetSubDomainOption getSubDomainOption = GetSubDomainOption.IncludeWWW)
{
var subdomain = new StringBuilder();
for (var i = 0; i < uri.Host.Split(new char[]{'.'}).Length - 2; i++)
{
//Ignore any www values of ExcludeWWW option is set
if(getSubDomainOption == GetSubDomainOption.ExcludeWWW && uri.Host.Split(new char[]{'.'})[i].ToLowerInvariant() == "www") continue;
//I use a ternary operator here...this could easily be converted to an if/else if you are of the ternary operators are evil crowd
subdomain.Append((i < uri.Host.Split(new char[]{'.'}).Length - 3 &&
uri.Host.Split(new char[]{'.'})[i+1].ToLowerInvariant() != "www") ?
uri.Host.Split(new char[]{'.'})[i] + "." :
uri.Host.Split(new char[]{'.'})[i]);
}
return subdomain.ToString();
}
}
USAGE:
var subDomain = Request.Url.GetSubDomain(GetSubDomainOption.ExcludeWWW);
or
var subDomain = Request.Url.GetSubDomain();
I currently have the default set to include the WWW. You could easilly reverse this by switching the optional parameter value in the GetSubDomain() method.
In my opinion this allows for an option that looks nice in code and without digging in appears to be 'built-in' to c#. Just to confirm your expectations...I tested three values and this method will always return just the "yellowcpd" if the exclude flag is used.
www.yellowcpd.testpace.net
yellowcpd.testpace.net
www.yellowcpd.www.testpace.net
One assumption that I use is that...splitting the hostname on a . will always result in the last two values being the domain (i.e. something.com)
As others have pointed out, you can do something like this:
var req = new HttpRequest(filename: "search", url: "http://www.yellowcpd.testpace.net", queryString: "q=alaska");
var host = req.Url.Host;
var yellow = host.Split('.')[1];
The portion of the URL you want is part of the hostname. You may hope to find some method that directly addresses that portion of the name, e.g. "the subdomain (yellowcpd) within TestSpace", but this is probably not possible, because the rules for valid host names allow for any number of labels (see Valid Host Names). The host name can have any number of labels, separated by periods. You will have to add additional restrictions to get what you want, e.g. "Separate the host name into labels, discard www if present and take the next label".
If I have the following string:
/lorem/ipsum/dolor
and I want this to become:
/lorem/ipsum
What is the short-hand way of removing the last forward slash, and all characters following it?
I know how I can do this by spliting the string into a List<> and removing the last item, and then joining, but is there a shorter way of writing this?
My question is not URL specific.
You can use Substring() and LastIndexOf():
str = str.Substring(0, str.LastIndexOf('/'));
EDIT (suggested comment)
To prevent any issues when the string may not contain a /, you could use something like:
int lastSlash = str.LastIndexOf('/');
str = (lastSlash > -1) ? str.Substring(0, lastSlash) : str;
Storing the position in a temp-variable would prevent the need to call .LastIndexOf('/') twice, but it could be dropped in favor of a one-line solution instead.
If there is '/' at the end of the url, remove it.
If not; just return the original one.
var url = this.Request.RequestUri.ToString();
url = url.EndsWith("/") ? url.Substring(0, url.Length - 1) : url;
url += #"/mycontroller";
You can do something like str.Remove(str.LastIndexOf("/")), but there is no built-in method to do what you want.
Edit: you could also use the Uri object to traverse directories, although it does not give exactly what you want:
Uri baseUri = new Uri("http://domain.com/lorem/ipsum/dolor");
Uri myUri = new Uri(baseUri, ".");
// myUri now contains http://domain.com/lorem/ipsum/
One simple way would be
String s = "domain.com/lorem/ipsum/dolor";
s = s.Substring(0, s.LastIndexOf('/'));
Console.WriteLine(s);
Another maybe
String s = "domain.com/lorem/ipsum/dolor";
s = s.TrimEnd('/');
Console.WriteLine(s);
You can use the regex /[^/]*$ and replace with the empty string:
var fixed = new Regex("/[^/]*$").Replace("domain.com/lorem/ipsum/dolor", "")
But it's probably overkill here. #newfurniturey's answer of Substring with LastIndexOf is probably best.
I like to create a String Extension for stuff like this:
/// <summary>
/// Returns with suffix removed, if present
/// </summary>
public static string TrimIfEndsWith(
this string value,
string suffix)
{
return
value.EndsWith(suffix) ?
value.Substring(0, value.Length - suffix.Length) :
value;
}
You can then use like this:
var myString = "/lorem/ipsum/dolor";
myStringClean = myString.TrimIfEndsWith("/dolor");
You now have a re-usable extension across all of your projects that can be used to remove one trailing character or multiple.
using System.IO;
mystring.TrimEnd(Path.AltDirectorySeparatorChar); // To remove "/"
mystring.TrimEnd(Path.DirectorySeparatorChar); // To remove "\"
while (input.Last() == '/' || input.Last() == '\\')
{
input = input.Substring(0, input.Length - 1);
}
Thank you #Curt for your question.
I slightly improved #newfurniturey's code, and here is my version.
if(str.Contains('/')){
str = str.Substring(0, str.LastIndexOf('/'));
}
I'm way late to the party, but if you're using C# 8.0+, another clean approach would be to use the range operator:
if (urlStr.EndsWith("/")) urlStr = urlStr[..^1];
If you're curious as to how this works, take a look at the spec for ranges in C#:
https://learn.microsoft.com/en-us/dotnet/csharp/language-reference/proposals/csharp-8.0/ranges
tldr; urlStr[..^1] roughly translates to something along the lines of "Give me a substring comprised of the characters contained within the range of index 0 to whatever index is 1 away from the last index.".
In other words, it's similar to...
urlStr.Substring(0, urlStr.Length-1)
I am reading from history, and I want that when i come across a google query, I can extract the query string. I am not using request or httputility since i am simply parsing a string. however, when i come across URLs like this, my program fails to parse it properly:
http://www.google.com.mt/search?client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&channel=s&hl=mt&source=hp&biw=986&bih=663&q=hotmail&meta=&btnG=Fittex+bil-Google
what i was trying to do is get the index of q= and the index of & and take the words in between but in this case the index of & will be smaller than q= and it will give me errors.
any suggestions?
thanks for your answers, all seem good :) p.s. i couldn't use httputility, not I don't want to. when i add a reference to system.web, httputility isn't included! it's only included in an asp.net application. Thanks again
It's not clear why you don't want to use HttpUtility. You could always add a reference to System.Web and use it:
var parsedQuery = HttpUtility.ParseQueryString(input);
Console.WriteLine(parsedQuery["q"]);
If that's not an option then perhaps this approach will help:
var query = input.Split('&')
.Single(s => s.StartsWith("q="))
.Substring(2);
Console.WriteLine(query);
It splits on & and looks for the single split result that begins with "q=" and takes the substring at position 2 to return everything after the = sign. The assumption is that there will be a single match, which seems reasonable for this case, otherwise an exception will be thrown. If that's not the case then replace Single with Where, loop over the results and perform the same substring operation in the loop.
EDIT: to cover the scenario mentioned in the comments this updated version can be used:
int index = input.IndexOf('?');
var query = input.Substring(index + 1)
.Split('&')
.SingleOrDefault(s => s.StartsWith("q="));
if (query != null)
Console.WriteLine(query.Substring(2));
If you don't want to use System.Web.HttpUtility (thus be able to use the client profile), you can still use Mono HttpUtility.cs which is only an independent .cs file that you can embed in your application. Then you can simply use the ParseQueryString method inside the class to parse the query string properly.
here is the solution -
string GetQueryString(string url, string key)
{
string query_string = string.Empty;
var uri = new Uri(url);
var newQueryString = HttpUtility.ParseQueryString(uri.Query);
query_string = newQueryString[key].ToString();
return query_string;
}
Why don't you create a code which returns the string from the q= onwards till the next &?
For example:
string s = historyString.Substring(url.IndexOf("q="));
int newIndex = s.IndexOf("&");
string newString = s.Substring(0, newIndex);
Cheers
Use the tools available:
String UrlStr = "http://www.google.com.mt/search?client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&channel=s&hl=mt&source=hp&biw=986&bih=663&q=hotmail&meta=&btnG=Fittex+bil-Google";
NameValueCollection Items = HttpUtility.ParseQueryString(UrlStr);
String QValue = Items["q"];
If you really need to do the parsing yourself, and are only interested in the value for 'q' then the following would work:
string url = #"http://www.google.com.mt/search?" +
"client=firefoxa&rls=org.mozilla%3Aen-" +
"US%3Aofficial&channel=s&hl=mt&source=hp&" +
"biw=986&bih=663&q=hotmail&meta=&btnG=Fittex+bil-Google";
int question = url.IndexOf("?");
if(question>-1)
{
int qindex = url.IndexOf("q=", question);
if (qindex > -1)
{
int ampersand = url.IndexOf('&', qindex);
string token = null;
if (ampersand > -1)
token = url.Substring(qindex+2, ampersand - qindex - 2);
else
token = url.Substring(qindex+2);
Console.WriteLine(token);
}
}
But do try to look at using a proper URL parser, it will save you a lot of hassle in the future.
(amended this question to include a check for the '?' token, and support 'q' values at the end of the query string (without the '&' at the end) )
And that's why you should use Uri and HttpUtility.ParseQueryString.
HttpUtility is fine for the .Net Framework. However that class is not available for WinRT apps. If you want to get the parameters from a url in a Windows Store App you need to use WwwFromUrlDecoder. You create an object from this class with the query string you want to get the parameters from, the object has an enumerator and supports also lambda expressions.
Here's an example
var stringUrl = "http://localhost/?name=Jonathan&lastName=Morales";
var decoder = new WwwFormUrlDecoder(stringUrl);
//Using GetFirstByName method
string nameValue = decoder.GetFirstByName("name");
//nameValue has "Jonathan"
//Using Lambda Expressions
var parameter = decoder.FirstOrDefault(p => p.Name.Contains("last")); //IWwwFormUrlDecoderEntry variable type
string parameterName = parameter.Name; //lastName
string parameterValue = parameter.Value; //Morales
You can also see http://www.dzhang.com/blog/2012/08/21/parsing-uri-query-strings-in-windows-8-metro-style-apps