I worked out how to read a large file into a smaller file, but only if I start at the beginning. I would like to be able to read from the middle to an arbitrary point. I realize it sounds crazy, but I have my reasons. I keep getting nothing written out to the file when I set the position greater than 0 for some reason. I will end up with a file full of null values.
I thought this would read 300K in from 2.5MB into the file.
public static FileStream stream = new FileStream(#"file.dat", FileMode.Open, FileAccess.Read);
public static FileStream shortFile = null;
int limit = 300000;
public MainWindow()
{
byte[] block = new byte[limit];
using (FileStream fs = File.Create("tempfile.dat"))
{
var newposition = stream.Seek(2500000, SeekOrigin.Begin);
stream.Position = newposition;
while (stream.Read(block, 0, limit) > 0 && stream.Position <= limit)
{
fs.Write(block, 0, block.Length);
}
}
InitializeComponent();
}
You have said "I thought this would read 300K in from 2.5MB into the file"; but you have the limit and the Seek values the other way around. The Seek position needs to be set to 300000; the limit should be 2500000.
Other tips:
Streams are disposable so better to keep them as local variables, declared in using blocks (i.e. do that for stream).
You don't need to set stream.Position = newposition; since that is what the Seek has just done.
I use the following code to write log file:
Encoding enc = Encoding.GetEncoding(932);
MemoryStream msLog = new MemoryStream();
StreamWriter swLog = new StreamWriter(msLog, enc);
swLog.WriteLine("Line Number,Error,Additional Information"); //log header
After some complex processing I'd like to know whether there any log line was added except the header. Obviously, one way is to set some boolean variable to true whenever I use swLog.WriteLine(), but because of long and complex code I'd like to avoid this approach. How can I easily check line count of memory stream?
As you noted, there are other better ways to do this. However, here is a direct answer to your question:
First, make sure that the StreamWriter has flushed the data into the stream like this:
swLog.Flush();
Then, you can use the following method to detect if the MemoryStream has more than one line:
private bool HasMoreThanNumberOfLines(Stream stream, Encoding enc, int number_of_lines)
{
long current_position = stream.Position;
stream.Position = 0;
try
{
using(StreamReader sr = new StreamReader(stream, enc, true, 1024, true))
{
for (int i = 0; i < number_of_lines + 1 ; i++)
{
string line = sr.ReadLine();
if (line == null)
return false;
}
}
return true;
}
finally
{
stream.Position = current_position;
}
}
Please note that I am using a special constructor of StreamReader to make sure that it does not close the underlying stream (stream) when it is disposed of.
Notice also how this method saves the current position of the stream, and then restores it after executing its logic so that the StreamWriter would continue to work normally.
You can use this method like this:
var has_another_line = HasMoreThanNumberOfLines(msLog, enc, 1);
Please note that this is not thread-safe. I am assuming that the stream will be accessed by a single thread at any point in time. You would need to put some locks to make it thread-safe.
I got a file stream which has content read from a disk.
Stream input = new FileStream("filename");
This stream is to be passed to a third party library which after reading the stream, keeps the Stream's position pointer at the end of the file (as ususal).
My requirement is not to load the file from the desk everytime, instead I want to maintain MemoryStream, which will be used everytime.
public static void CopyStream(Stream input, Stream output)
{
byte[] buffer = new byte[32768];
int read;
while ((read = input.Read(buffer, 0, buffer.Length)) > 0)
{
output.Write(buffer, 0, read);
}
}
I have tried the above code. It works for the first very time to copy the input stream to output stream, but subsequent calls to CopyStream will not work as the source's Position will be at the end of the stream after the first call.
Are there other alternatives which copy the content of the source stream to another stream irrespective of the source stream's current Position.
And this code needs to run in thread safe manner in a multi threaded environment.
You can use .NET 4.0 Stream.CopyTo to copy your steam to a MemoryStream. The MemoryStream has a Position property you can use to move its postition to the beginning.
var ms = new MemoryStream();
using (Stream file = File.OpenRead(#"filename"))
{
file.CopyTo(ms);
}
ms.Position = 0;
To make a thread safe solution, you can copy the content to a byte array, and make a new MemoryStream wrapping the byte array for each thread that need access:
byte[] fileBytes = ms.ToArray();
var ms2 = new MemoryStream(fileBytes);
You should check the input stream's CanSeek property. If that returns false, you can only read it once anyway. If CanSeek returns true, you can set the position to zero and copy away.
if (input.CanSeek)
{
input.Position = 0;
}
You may also want to store the old position and restore it after copying.
ETA: Passing the same instance of a Stream around is not the safest thing to do. E.g. you can't be sure the Stream wasn't disposed when you get it back. I'd suggest to copy the FileStream to a MemoryStream in the beginning, but only store the byte content of the latter by calling ToArray(). When you need to pass a Stream somewhere, just create a new one each time with new MemoryStream(byte[]).
Edit: Solution is at bottom of post
I am trying my luck with reading binary files. Since I don't want to rely on byte[] AllBytes = File.ReadAllBytes(myPath), because the binary file might be rather big, I want to read small portions of the same size (which fits nicely with the file format to read) in a loop, using what I would call a "buffer".
public void ReadStream(MemoryStream ContentStream)
{
byte[] buffer = new byte[sizePerHour];
for (int hours = 0; hours < NumberHours; hours++)
{
int t = ContentStream.Read(buffer, 0, sizePerHour);
SecondsToAdd = BitConverter.ToUInt32(buffer, 0);
// further processing of my byte[] buffer
}
}
My stream contains all the bytes I want, which is a good thing. When I enter the loop several things cease to work.
My int t is 0although I would presume that ContentStream.Read() would process information from within the stream to my bytearray, but that isn't the case.
I tried buffer = ContentStream.GetBuffer(), but that results in my buffer containing all of my stream, a behaviour I wanted to avoid by using reading to a buffer.
Also resetting the stream to position 0 before reading did not help, as did specifying an offset for my Stream.Read(), which means I am lost.
Can anyone point me to reading small portions of a stream to a byte[]? Maybe with some code?
Thanks in advance
Edit:
Pointing me to the right direction was the answer, that .Read() returns 0 if the end of stream is reached. I modified my code to the following:
public void ReadStream(MemoryStream ContentStream)
{
byte[] buffer = new byte[sizePerHour];
ContentStream.Seek(0, SeekOrigin.Begin); //Added this line
for (int hours = 0; hours < NumberHours; hours++)
{
int t = ContentStream.Read(buffer, 0, sizePerHour);
SecondsToAdd = BitConverter.ToUInt32(buffer, 0);
// further processing of my byte[] buffer
}
}
And everything works like a charm. I initially reset the stream to its origin every time I iterated over hour and giving an offset. Moving the "set to beginning-Part" outside my look and leaving the offset at 0 did the trick.
Read returns zero if the end of the stream is reached. Are you sure, that your memory stream has the content you expect? I´ve tried the following and it works as expected:
// Create the source of the memory stream.
UInt32[] source = {42, 4711};
List<byte> sourceBuffer = new List<byte>();
Array.ForEach(source, v => sourceBuffer.AddRange(BitConverter.GetBytes(v)));
// Read the stream.
using (MemoryStream contentStream = new MemoryStream(sourceBuffer.ToArray()))
{
byte[] buffer = new byte[sizeof (UInt32)];
int t;
do
{
t = contentStream.Read(buffer, 0, buffer.Length);
if (t > 0)
{
UInt32 value = BitConverter.ToUInt32(buffer, 0);
}
} while (t > 0);
}
What is the best way to copy the contents of one stream to another? Is there a standard utility method for this?
From .NET 4.5 on, there is the Stream.CopyToAsync method
input.CopyToAsync(output);
This will return a Task that can be continued on when completed, like so:
await input.CopyToAsync(output)
// Code from here on will be run in a continuation.
Note that depending on where the call to CopyToAsync is made, the code that follows may or may not continue on the same thread that called it.
The SynchronizationContext that was captured when calling await will determine what thread the continuation will be executed on.
Additionally, this call (and this is an implementation detail subject to change) still sequences reads and writes (it just doesn't waste a threads blocking on I/O completion).
From .NET 4.0 on, there's is the Stream.CopyTo method
input.CopyTo(output);
For .NET 3.5 and before
There isn't anything baked into the framework to assist with this; you have to copy the content manually, like so:
public static void CopyStream(Stream input, Stream output)
{
byte[] buffer = new byte[32768];
int read;
while ((read = input.Read(buffer, 0, buffer.Length)) > 0)
{
output.Write (buffer, 0, read);
}
}
Note 1: This method will allow you to report on progress (x bytes read so far ...)
Note 2: Why use a fixed buffer size and not input.Length? Because that Length may not be available! From the docs:
If a class derived from Stream does not support seeking, calls to Length, SetLength, Position, and Seek throw a NotSupportedException.
MemoryStream has .WriteTo(outstream);
and .NET 4.0 has .CopyTo on normal stream object.
.NET 4.0:
instream.CopyTo(outstream);
I use the following extension methods. They have optimized overloads for when one stream is a MemoryStream.
public static void CopyTo(this Stream src, Stream dest)
{
int size = (src.CanSeek) ? Math.Min((int)(src.Length - src.Position), 0x2000) : 0x2000;
byte[] buffer = new byte[size];
int n;
do
{
n = src.Read(buffer, 0, buffer.Length);
dest.Write(buffer, 0, n);
} while (n != 0);
}
public static void CopyTo(this MemoryStream src, Stream dest)
{
dest.Write(src.GetBuffer(), (int)src.Position, (int)(src.Length - src.Position));
}
public static void CopyTo(this Stream src, MemoryStream dest)
{
if (src.CanSeek)
{
int pos = (int)dest.Position;
int length = (int)(src.Length - src.Position) + pos;
dest.SetLength(length);
while(pos < length)
pos += src.Read(dest.GetBuffer(), pos, length - pos);
}
else
src.CopyTo((Stream)dest);
}
.NET Framework 4 introduce new "CopyTo" method of Stream Class of System.IO namespace. Using this method we can copy one stream to another stream of different stream class.
Here is example for this.
FileStream objFileStream = File.Open(Server.MapPath("TextFile.txt"), FileMode.Open);
Response.Write(string.Format("FileStream Content length: {0}", objFileStream.Length.ToString()));
MemoryStream objMemoryStream = new MemoryStream();
// Copy File Stream to Memory Stream using CopyTo method
objFileStream.CopyTo(objMemoryStream);
Response.Write("<br/><br/>");
Response.Write(string.Format("MemoryStream Content length: {0}", objMemoryStream.Length.ToString()));
Response.Write("<br/><br/>");
There is actually, a less heavy-handed way of doing a stream copy. Take note however, that this implies that you can store the entire file in memory. Don't try and use this if you are working with files that go into the hundreds of megabytes or more, without caution.
public static void CopySmallTextStream(Stream input, Stream output)
{
using (StreamReader reader = new StreamReader(input))
using (StreamWriter writer = new StreamWriter(output))
{
writer.Write(reader.ReadToEnd());
}
}
NOTE: There may also be some issues concerning binary data and character encodings.
The basic questions that differentiate implementations of "CopyStream" are:
size of the reading buffer
size of the writes
Can we use more than one thread (writing while we are reading).
The answers to these questions result in vastly different implementations of CopyStream and are dependent on what kind of streams you have and what you are trying to optimize. The "best" implementation would even need to know what specific hardware the streams were reading and writing to.
Unfortunately, there is no really simple solution. You can try something like that:
Stream s1, s2;
byte[] buffer = new byte[4096];
int bytesRead = 0;
while (bytesRead = s1.Read(buffer, 0, buffer.Length) > 0) s2.Write(buffer, 0, bytesRead);
s1.Close(); s2.Close();
But the problem with that that different implementation of the Stream class might behave differently if there is nothing to read. A stream reading a file from a local harddrive will probably block until the read operaition has read enough data from the disk to fill the buffer and only return less data if it reaches the end of file. On the other hand, a stream reading from the network might return less data even though there are more data left to be received.
Always check the documentation of the specific stream class you are using before using a generic solution.
There may be a way to do this more efficiently, depending on what kind of stream you're working with. If you can convert one or both of your streams to a MemoryStream, you can use the GetBuffer method to work directly with a byte array representing your data. This lets you use methods like Array.CopyTo, which abstract away all the issues raised by fryguybob. You can just trust .NET to know the optimal way to copy the data.
if you want a procdure to copy a stream to other the one that nick posted is fine but it is missing the position reset, it should be
public static void CopyStream(Stream input, Stream output)
{
byte[] buffer = new byte[32768];
long TempPos = input.Position;
while (true)
{
int read = input.Read (buffer, 0, buffer.Length);
if (read <= 0)
return;
output.Write (buffer, 0, read);
}
input.Position = TempPos;// or you make Position = 0 to set it at the start
}
but if it is in runtime not using a procedure you shpuld use memory stream
Stream output = new MemoryStream();
byte[] buffer = new byte[32768]; // or you specify the size you want of your buffer
long TempPos = input.Position;
while (true)
{
int read = input.Read (buffer, 0, buffer.Length);
if (read <= 0)
return;
output.Write (buffer, 0, read);
}
input.Position = TempPos;// or you make Position = 0 to set it at the start
Since none of the answers have covered an asynchronous way of copying from one stream to another, here is a pattern that I've successfully used in a port forwarding application to copy data from one network stream to another. It lacks exception handling to emphasize the pattern.
const int BUFFER_SIZE = 4096;
static byte[] bufferForRead = new byte[BUFFER_SIZE];
static byte[] bufferForWrite = new byte[BUFFER_SIZE];
static Stream sourceStream = new MemoryStream();
static Stream destinationStream = new MemoryStream();
static void Main(string[] args)
{
// Initial read from source stream
sourceStream.BeginRead(bufferForRead, 0, BUFFER_SIZE, BeginReadCallback, null);
}
private static void BeginReadCallback(IAsyncResult asyncRes)
{
// Finish reading from source stream
int bytesRead = sourceStream.EndRead(asyncRes);
// Make a copy of the buffer as we'll start another read immediately
Array.Copy(bufferForRead, 0, bufferForWrite, 0, bytesRead);
// Write copied buffer to destination stream
destinationStream.BeginWrite(bufferForWrite, 0, bytesRead, BeginWriteCallback, null);
// Start the next read (looks like async recursion I guess)
sourceStream.BeginRead(bufferForRead, 0, BUFFER_SIZE, BeginReadCallback, null);
}
private static void BeginWriteCallback(IAsyncResult asyncRes)
{
// Finish writing to destination stream
destinationStream.EndWrite(asyncRes);
}
For .NET 3.5 and before try :
MemoryStream1.WriteTo(MemoryStream2);
Easy and safe - make new stream from original source:
MemoryStream source = new MemoryStream(byteArray);
MemoryStream copy = new MemoryStream(byteArray);
The following code to solve the issue copy the Stream to MemoryStream using CopyTo
Stream stream = new MemoryStream();
//any function require input the stream. In mycase to save the PDF file as stream
document.Save(stream);
MemoryStream newMs = (MemoryStream)stream;
byte[] getByte = newMs.ToArray();
//Note - please dispose the stream in the finally block instead of inside using block as it will throw an error 'Access denied as the stream is closed'