I am planning to install VS 2012 or 2013 and I was wondering if .NET 4.5 will get installed with it? I think it will but then what will happen to all my apps with target platform 4.0?
So my question is when I install VS, will my old apps which have target platform 4 contain elements of .NET 4.5?
Let say as example type string in 4.5 it has some improvements or something which 4.0 doesnt have. Will I get them even though I build against 4.0 according to target platform?
I would like to avoid some strange behavior in already existing projects just because I am running now visual studio 2013.
Any experience on this one guys?
Sorry in case of a duplicate question
In Visual Studio 2013 you can still build against .NET 4.0. The (highest) framework version installed on your development machine has no influence on the end result of your build process.
When installing .NET 4.5 in place of .NET 4 will change something on your PC: It gives you the ability to compile against the 4.5 version of the framework. As long as your compile your code against the NET 4.0 version, it has no need of .NET 4.5 to be installed.
If you target .NET 4.0, your code will not be able to access types which are specific to .NET 4.5 or .NET 4.5.1. However, your code will be running against .NET 4.5. That is only a problem if you do not test against .NET 4.0. In that case, you could find that bugs are fixed in .NET 4.5, but your users may still be using .NET 4.0, which may still have the bugs.
Related
Having read numerous posts on the net and here at Stack Overflow about this I still am unsure as to whether VS 2010 supports .NET 4.5. MS states on http://www.microsoft.com/en-in/download/details.aspx?id=30653 that it is an in place upgrade .NET 4.
Does this mean that once .NET 4.5 has been installed on a machine with VS2010 installed I can still leave my target as .NET 4 but it will actually be using 4.5? For various reasons I cannot upgrade to VS 2012.
All pointers greatly appreciated.
You can't target .NET 4.5 with VS2010.
.NET 4.5 does not install side by side with .NET 4.0, it replaces it. But it still allows you to target .NET 4.0 with it installed, so it shouldn't break the installation AFAIK. But you can't utilize any of the .NET 4.5 features since you can't target anything higher than .NET 4.0 in Visual Studio 2010.
If you need to use these features, you will have to install Visual Studio 2012.
Can you please help me with this. Am I able to run .net 2.0 in visual studio 2012? Can you direct me to the diagrams that show the framework compatibility?
Yes. You are able to build .Net v2.0 projects in the Visual Studio 2012.
Here goes the list of all available versions of .Net Framework:
http://pasteboard.s3.amazonaws.com/images/uWRTNBl.png
Framework targeting does not guarantee that your application will run correctly. You must test your application to make sure it runs against the targeted version. You cannot target framework versions that are earlier than the .NET Framework 2.0.
http://msdn.microsoft.com/en-us/library/bb398197(v=vs.110).aspx
In short, yes, you can target .NET 2.0 - and no, there's no master list of compatibility issues.
I am porting a project built on VS2008 to VS2005 since the minor .NET version for us have to 2.0 instead of 3.5 and rest of our code is building on VS2005. So I modified the visual studio version from 2008 to 2005 at the .sln file
Microsoft Visual Studio Solution File, Format Version 9.00
# Visual Studio 2005
So I am able to load the .sln into the VS2005. I have some building problem, mainly the "var" and after I modified those lines with real data type, the code compiles and runs.
However at the project assembly reference. I found out that my code is still reference Linq which is from .NET 3.5:
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\v3.5\System.Xml.Linq.dll
When I open up the dialog to add new reference, I could see that the .NET version 2.0, 3.5 and even 4.0 (although the CLR runtime version is 2.0.50727 in most of cases. sometimes 1.x and sometimes 4.0, Linq's runtime version is 2.0.50727).
I thought that VS2005 only supports .NET 2.0 which seems not that case here. So I guess how can I make sure that my application would only require .NET 2.0 framework. Is it enough to make sure that I only reference .NET 2.0 and below reference?
As long as the target framework is .NET 2.0 and you don't reference any libraries that do target higher .NET framework versions, your app should run just fine on .NET 2.0.
That said, I believe Visual Studio 2008 supports multi-targeting, so you should be able to use VS2008 but still target .NET 2.0 as your output type. Additionally, VS2010 and VS2012RC also support .NET 2.0 only projects.
To answer the exact question in the title (for the benifit of those who find this page by its title) the .NET version used by default in Visual Studio 2005 is .NET v2.0.
You can still use VS2008. VS2008 fully supports 2.0-only projects (just change the project settings). When in 2.0 mode VS will disable any 3.0 and 3.5 assemblies as well as any C# language features that depend on 3.0 or 3.5 library classes (such as extension methods, but there is a workaround to get those working with 2.0).
I'll say that VS2010 also supports 2.0-only projects too.
In a project which target framework is 3.5 the following line compiles with MsBuild 4.0:
aEnumerable.Select(aMethod);
But MsBuild 3.5 requires me to write:
aEnumerable.Select(item => aMethod(item));
Will both binaries will run a machine without .NET Framework 4.0, but with .NET 3.5?
PS: While i showed an example using "method overload inference" the same happens with other "4.0" features (eg. "named parameters").
another title for this question could be: What C# 4.0/Visual Studio 2010 features are .NET 3.5 compatible?
You are confusing Msbuild and the .NET framework.
Msbuild is just a tool to build .NET projects. Version 4.0 is required to build .NET 4 projects, but it can also do .NET 1.1, 2.0, 3.0, 3.5, 3.5 SP1. Its just like using Word 2010 to open a Word 2003 file. 2010 will open both, but 2003 will crash if you give it a 2010 file
Your code examples are showing differenecs added to the framework in version 4.0. You cannot execute .NET 4 code on a machine that doesn't haven't the .NET 4.0 framework installed. Doesn't matter what builds it, the runtime will not be able to understand the CLR and it won't run
As for msBuild itself:
MsBuild 4.0 is a new version, largely updated to support .NET 4, but also with its own features. Consult the release notes for msbuild4 if you need those details.
That said, MsBuild 4 is fully capable of producing .NET 3.5 output so long as the targetFramework is properly configured. (We moved all our builds to MsBuild 4.0 long before we upgraded all projects to the .NET 4 framework)
If you target the installation to .NET 3.5 SP 1 and it works then it will work on a machine with just .NET 3.5 Service Pack 1. If your not targeting 3.5 SP1 you should.
Version 3.5 of MSBuild, which is
bundled together with .NET 3.5 (and
Visual Studio 2008), allows .NET
projects to be built for either 2.0,
3.0 or 3.5 .NET version support (also known as"multi-targeting").
Source
I would extrapulate that MSBuild 4 would be updated to also support .NET Framework 4.0. You should of course test your installations yourself a virtual machine and make sure everything works.
I just wanted to clarify that you should be using the MsBuild 3.5 method if you want to remove any compability issues that might arise otherwise. I suspect that MSBuild 4.0 would keep support for the older method but was just updated to support changes that happen in the 4.0 .NET Framework.
A command similar to the following
should work
msbuild YourSolution.sln /tv:3.5
/p:TargetFrameworkVersion=v3.5 or
msbuild YourSolution.sln
/p:TargetFrameworkVersion=v3.5 /tv (or
/toolsversion) Indicates which version
of the MSBuild tools you want to use,
and the property
TargetFrameworkVersion indicates the
target framework. In your case just
specifying that property should be
fine, but if you want to use the 3.5
MSBuild toolset you can sepcify it
with /tv as I did in the first
command.
Source
I had a request to write a dll library using C#, it should be build under .NET 3.5.
I've build the library (it's a simple TCP client) using Visual Studio 2005 with .NET 2.0.50727.
I'm assuming that I can not deliver this library since it's built against wrong .net
I have more .NET versions installed on my development machine but it looks like I can't switch the .net in properties like JDK versions in eclipse for a particular project.
Is the only proper way of doing this is installing Visual Studio 2008 Express with 3.5 .NET?
Or some C# sdk with appropriate compiler (the thing is that I don't know the syntax for the c# compiler and NANT would be pain in the ass at this stage)?
cheers
P.
As jgauffin already mentioned your .Net 2.0 assembly will work fine in .Net 3.5.
And switching to another .Net Framework is just downwards possible.
So with VS2010 you can built against .Net 4, 3.5, 2.0 and 1.1
With VS2008 you can built against .Net 3.5, 2.0 and 1.1
With VS2005 you can built only against .Net 2.0
With VS2003 you can built only against .Net 1.1
So if you really need it just go and download it from here.
3.5 is just 2.0 with additional libraries. Your DLL will work fine from a .Net 3.5 application.
I might be wrong, but I think that 3.5 was introduced with Visual Studio 2008 and cannot be built against with 2005. That's why you can't switch version.