seems like a trivial task: i am building a wpf application, using MVVM pattern. what i want is dynamically change part of a view, using different UserControls, dependent on user input.
let's say, i have got 2 UserControls, one with a button, and another with a label.
in main view i have a container for that. following XAML "works":
<GroupBox Header="container" >
<local:UserControlButton />
</GroupBox>
and a UserControl element with buttons pops up. if i change it to another one, it works too.
question is how to feed that groupbox dynamically. if i put something like that in my model view:
private UserControl _myControl;
public UserControl MyControl
{
get
{
return _myControl;
}
set
{
_myControl= value;
InvokePropertyChanged("MyControl");
}
}
and change my view XAML to something like:
<GroupBox Header="container" >
<ItemsControl ItemsSource="{Binding MyControl}" />
</GroupBox>
and feed it from command with usercontrol for button or for label: nothing happens, although "MyControl" variable is set and is "invoke property changed"..
Obviously there are many ways to skin this particular cat - but to answer the question of why it doesn't work you need to look into the ItemsSource property of ItemsControl on MSDN.
The items control is designed to show multiple items, provided through an IEnumerable passed to the ItemsSource property. You are passing a UserControl, so the binding will fail.
For your example, I would change the ItemsControl to a ContentControl and bind the content to your MyControl property. This should then work.
<GroupBox Header="container" >
<ContentControl Content="{Binding MyControl}" />
</GroupBox>
However, I would strongly recommend looking into other ways of doing this - having a control in your VM breaks MVVM to my mind. Depending on what you are doing look at data templates - #Sheridan's link in the comments provides an great description of a way to do it.
Couldn't post this as a comment so adding as answer..
Have a look at this:
Implementing an own "Factory" for reusing Views in WPF
It uses DataTemplates but doesn't require the DataTemplate section for each view. If you potentially have a lot of user controls/views you wish to display or you are reusing through multiple views or you are intending to actually dynamically generate a view (versus just loading an existing user control) then this might suite your needs.
Related
I am quite new to WPF development, and currently I am trying to use the MVVM on my application development. I have read a lot about MVVM navigation and switching views, but I can't find a solution for my current situation. Let's explain what it is:
First of all, I have my main View element, a Dockpanel, with some fixed areas, and a main "dynamic" area where the content should change, depending on actions:
<DockPanel>
<Label Content="Top Fixed element"/>
<StackPanel Orientation="Vertical" Height="auto" Width="150" DockPanel.Dock="Left">
<Label Content="SomeOptions"/>
<!-- some more elements -->
</StackPanel>
<Label DockPanel.Dock="Bottom" Content="Foot"/>
<ContentControl Content="{Binding CurrentMainViewElementViewModel}"/>
</DockPanel>
I have defined some DataTemplates that I would like to load in this ContentControl, here there is one of the Data Templates as example:
<Window.Resources>
<DataTemplate DataType="{x:Type ViewModel:FileLoaderVM}">
<View:FileLoaderView/>
</DataTemplate>
</Window.Resources>
This FileLoader (View and View Model are implemented, using the RelayCommand and the INotifyPropertyChanged) opens a dialog box after clicking a button, where after selecting a file it is opened and parsed, and show all the found elements inside a ListView with multiple selection(in this case, persons with their data).
What I want to do now is to load another user control in this ContentControl, when I click a button. This button is defined in my view model like this:
public ICommand LoadPersons
{
get { return new RelayCommand(param => this.loadSelectedPersons(), param => (SelectedPersons!=null && SelectedPersons.Any()));}
}
My question comes at this point, how can I modify the content of the ContentControl, loading another User Control instead of the current one directly from my view model (in this "this.loadSelectedPersons()")?
If this is not possible, how should I approach to solve this problem?
Next to this action, I want to show all the previously selected elements and manipulate in different possible ways (inserting in a DB, saving in another file and so on), and I have already for that the appropriate User Control, that I would like to show in my main view element in the ContentControl section, keeping the other elements as they are originally.
lets see if i get you right.
you have a mainviewmodel with a property (CurrentMainViewElementViewModel) bound to the ContentControl. your MainViewmodel set the FileLoaderVM to this Property. now you wanna show a "new/other" Viewmodel when a File is seleted in your FileLoaderVM?
why dont you simply expose a event from your FileLoaderVM and subscribe to this event in your MainViewModel? if you do so your MainViewModel can then set the "new/other" Viewmodel to the ContentControl
To change content of ContentControl you do not load another user control, but change value of CurrentMainViewElementViewModel (to which ContentControl.Content is bound) to a new ViewModel, which will load another UserControl (defined in DataTemplate same way as FileLoaderVM is).
This looks like a job for main ViewModel (where CurrentMainViewElementViewModel is located).
Easiest solution is to provide a method in that ViewModel
public Switch()
{
CurrentMainViewElementViewModel = SomeViewModel;
}
and call this method from FileLoaderVM.
i've written a tool that generates sql queries using GUI, i want to rewrite the tool using MVVM and WPF, every sql column type has a different control as you can see in the following image
i add a column filter control based on the sql column type, and i generate the controls using code, just like i used to do in windows forms.
in MVVM i've read that the view is writtien enteirly using XAML,
does MVVM suite such application where i have to add different user
controls dynamically to a stack panel?
The controls won't exist in the view unless some column is double clicked, that means the control won't be available in the xaml and won't be hidden or collapsed.
is there any way that i can avoid the bindings in the code behind?
should i create a user control for each column type?
in general what is the best approach to devlop such application with complex and dynamic ui using mvvm?
Guess I know how to achieve that, but it is very complex stuff. First you should comprehend MVVM basic concepts.
Main ViewModel should be a class with ObservableCollection of ViewModels, each of them represents a column with its data and properties.
interface IViewModel : INotifyPropertyChanged,IDisposable
{
}
interface IColumnViewModel : IViewModel
{
}
class ViewModelBase : IViewModel
{
// ... MVVM basics, PropertyChanged etc. ...
}
class MainViewModel : ViewModelBase
{
ObservableCollection<IColumnViewModel> Columns {get; set}
}
In View I suppose something like ItemsControl with ItemTemplate, that should embed ContentControl with DataTemplate, that shall be automatically selected by WPF according to binded DataContext of list item. StackPanel itself is not suitable for that, but it can be invoked as ItemsPanelTemplate
<Window
xmlns:v="clr-namespace:WpfApplication.Views"
xmlns:vm="clr-namespace:WpfApplication.ViewModels">
<Window.Resources>
<DataTemplate DataType="{x:Type TypeName=vm:TextColumnViewModel}">
<v:TextColumnView/>
</DataTemplate>
</Window.Resources>
<ItemsControl
ItemsSource="{Binding Columns}">
<ItemsControl.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel Orientation="Horizontal"/>
</ItemsPanelTemplate>
</ItemsControl.ItemsPanel>
<ItemsControl.ItemTemplate>
<DataTemplate>
<ContentControl Content="{Binding}"/>
</DataTemplate>
</ItemsControl.ItemTemplate>
</ItemsControl>
</Window>
So, you should build View/ViewModel pair for every column type.
Hope, my example will help. Good luck with your girlfriend and MVVM :)
If I've understood your scenario correctly :
You can use Data Templates & Items Templates
For example I've written an application which loads Data into Collection and then shows each item of that collection in a Wrap Panel [ Or stack panel ] based on defined data template.
And Wrap penel items are in sync by the collection itself within two way binding
You should consider using Observable Collections to achieve this goal
Then you can fill the collection and see the results on a view
I hope this helps
To write something like this in MVVM, you would have one view that is say, your content area. That view would have a view model, one of the properties of that view model would be a view, or several properties of that view model would be a view. It takes a bit to wrap your head around at times, but if you use Inversion of Control and Dependency Injection properly a view of views is very manageable in an MVVM pattern.
Well, your view isn't written entirely in XAML - you generate controls in C#.
I don't think you'll gain something from rewriting this and fitting it into an MVVM mold. Just keep the code as it is now and enjoy.
I have a WPF window displaying different self-defined Views. So far I was able to use everything I learned about MVVM :)
Now I got to a new "problem": I have 10 entities of the same view in a bigger view. These ten view-entities contain a set of controls (textbox, combobox etc.) but are all consistent.
So how do I bind these Views to a ViewModel?
I thought about having 10 instances of the ViewModel in the "higher-level" ViewModel and give the views fix-defined the instances of the VM as datacontext.
My question is now --> Is there a easier (or more convienient) way to bind many (identical) views to their viewmodels?
Code-Example:
View Model:
private PanelViewModel _panelViewModel1 = new PanelViewModel();
public PanelViewModel PanelVM1
{
get { return _panelViewModel1; }
}
View-Example:
<myControls:vwPanel HorizontalAlignment="Left" x:Name="vwPanel1"
VerticalAlignment="Top" DataContext="{Binding Path=PanelVM1}"/>
What bothers me is that I would need this logic ten times for ten views?
UPDATE:
To answer some questions: I want to show one view 10 times (in my example) I defined my own view by inheriting from UserControl. So my vwPanel inherits from UserControl. The 10 vwPanels are just placed inside a StackPanel inside a Grid.
It's not about displaying data, as you pointed out, there would be a listview or a datagrid a better place to start. It's a special case where I need this much input-controls :/
UPDATE2: What I hoped for was more like defining a List of ViewModels and Bind my 10 Views to one of this List. But this will not work will it? At least I wouldn't know how to refernce one "special" entitiy in the list out of XAML...
Typically I use implicit DataTemplates for mapping Views to ViewModels. They can go in <Application.Resources>, <Window.Resources> or even in under specific elements only such as <TabControl.Resources>
<DataTemplate DataType="{x:Type local:PanelViewModel}">
<myControls:vwPanel />
</DataTemplate>
This means that anytime WPF encounters an object in the VisualTree of type PanelViewModel, it will draw it using vwPanel
Objects typically get placed in the VisualTree through an ItemsSource property
<ItemsControl ItemsSource="{Binding CollectionOfAllPanels}" />
or by using a ContentControl
<ContentControl Content="{Binding PanelVM1}" />
If I understand your question correctly, you have a collection of something that you what to represent visually. That is, you have several viewmodels that you want to define a single view for, but show X number of times. Your example shows you using a panel as your view for the "PanelViewModel"...what is the parent item's control for the vwPanel? Assuming you're using something like a ListBox, you can define a custom DataTemplate that contains your vwPanel and assign that DataTemplate to your ListBox.ItemTemplate.
For example:
<Window.Resources>
<DataTemplate x:Key="myVMTemplate" TargetType="{x:Type myViewModels:PanelViewModel}">
<myControls:vwPanel HorizontalAlignment="Left" VerticalAlignment="Top"/>
</DataTemplate>
</Window.Resources>
<ListBox ItemsSource="{Binding Path=MyCollectionOfPanelVMs}"
ItemTemplate="{StaticResource myVMTemplate}" />
I haven't verified that this works.
This is a question that extends from the originally posted here:
Link to loading-xaml through runtime
I'm working on a WPF MVVM application that loads XAML content dynamically from an external source, very similar as the answer in the post above.
Here is what I got so far:
My View declares an instance of the ViewModel as a resource and creates an instance of that ViewModel
In my ViewModel constructor I'm loading a XamlString property coming from an external source (file or db..)
In my view I have a button that user clicks after ViewModel finishes loading and in the click-event code-behind I'm deserializing the dynamically loaded XAML and add it to my grid.
My question is, how can I eliminate code-behind and automate the logic so the View can render the new xaml section dynamically right after the ViewModel is done getting the XAML content and initializing the string property?
Should I use some kind of Messaging Bus so the ViewModel notifies once the property has been set so the View can add the new content?
What troubles me is the fact that ViewModels do have a reference to Views and should not be in charge of generating UI elements.
Thanks in advance!
Edit:
Just to clarify: in my particular case I am not trying to bind a Business Object or Collection (Model) to a UI element (e.g. Grid) which obviously could be accomplished through templates and binding. My ViewModel is retrieving a whole XAML Form from an external source and setting it as a string property available to the View. My question is: Who should be in charge of deserializing this XAML string property into a UI element and add it programmatically to the my grid once my Xaml string property in the VM is set?
This sounds to me more of like a View responsibility, not ViewModel. But the pattern as i understand it enforces to replace any code-behind logic with V-VM bindings.
I have a working solution now and I'd like to share it. Unfortunately I did not get rid of code-behind completely but it works as I expect it to. Here is how it works(simplified):
I have my simplified ViewModel:
public class MyViewModel : ViewModelBase
{
//This property implements INPC and triggers notification on Set
public string XamlViewData {get;set;}
public ViewModel()
{
GetXamlFormData();
}
//Gets the XAML Form from an external source (e.g. Database, File System)
public void GetXamlFormData()
{
//Set the Xaml String property
XamlViewData = //Logic to get XAML string from external source
}
}
Now my View:
<UserControl.Resources>
<ViewModel:MyViewModel x:Key="Model"></ViewModel:MyViewModel>
</UserControl.Resources>
<Grid DataContext="{StaticResource Model}">
<Grid.RowDefinitions>
<RowDefinition Height="Auto"/>
<RowDefinition/>
</Grid.RowDefinitions>
<StackPanel>
<!-- This is the Grid used as a Place Holder to populate the dynamic content!-->
<Grid x:Name="content" Grid.Row="1" Margin="2"/>
<!-- Then create a Hidden TextBlock bound to my XamlString property. Right after binding happens I will trigger an event handled in the code-behind -->
<TextBlock Name="tb_XamlString" Text="{Binding Path=XamlViewData, Mode=TwoWay, UpdateSourceTrigger=LostFocus, NotifyOnValidationError=True, ValidatesOnDataErrors=True, ValidatesOnExceptions=True}" Visibility="Hidden" Loaded="tb_XamlString_Loaded" />
</StackPanel>
</Grid>
Basically I created a hidden TextBlock bound to my XAML String property in the ViewModel and I hooked its Loaded event to an event handler in the code behind of the View:
private void tb_XamlString_Loaded(object sender, RoutedEventArgs routedEventArgs)
{
//First get the ViewModel from DataContext
MyViewModel vm = content.DataContext as MyViewModel;
FrameworkElement rootObject = XamlReader.Parse(vm.XamlViewData) as FrameworkElement;
//Add the XAML portion to the Grid content to render the XAML form dynamically!
content.Children.Add(rootObject);
}
This may not be the most elegant but gets the job done. Like some people say, in MVVM there are some cases like this where little code-behind code is needed. It doesn't hurt and also part of this solution still uses the V-VM Binding principles when using the VM to retrieve and populate the XamlString property and exposing it to the View. If we would like to Unit Test the XAML parsing and loading functionality we could delegate it to a separate class.
I hope someone finds this useful!
I'm having trouble understanding what you're saying, so my answer will be based on my interpretation. You should consider posting a sample (simplified) of what you're trying to do.
1) I think you're misunderstanding what MVVM does. MVVM is mostly a binding-based pattern. Your view model should be exposing properties containing business objects and your view should just be binding to those properties. If I am misunderstanding you, and that's what you are doing, then your problem is that your view needs to be aware of when the properties get updated (after you deserialize your xaml, etc). There are two ways to do this: INotifyPropertyChanged interface on your viewmodel, or make your view model inherit from DependencyObject, and make the properties dependency properties. I won't go into details here, because this is a large subject that you should research on Google before making a decision.
2) Generally speaking, you shouldn't use click events inside your view if you're using MVVM. Instead, create properties on the view model of type ICommand (and create ICommand implementations to match, or use an implementation of DelegateCommand (google it) which will allow you to use delegates to implement the interface. The idea is, your view binds to the property and executes the handler directly inside the viewmodel.
3) If you want to push information from the viewmodel to the view, then you should create an event on the viewmodel and subscribe to it in the view, but this is a last resort, only to be used in cases like displaying a new window, etc. Generally, you should be using binding.
4) To be more specific about what you're doing, you should be binding your Grid's ItemsSource property to some property on the view model. Note, the property on the view model should be of type ObservableCollection<T> if you want to be able to add items and get instant updates.
Hope this helps.
i've been banging my head on this for the last hours...
I have a User Control called "DayItem", and i want to show it 48 times in another UserControl called "DayPanel".
Let me mention this is done in MVVM style, but i'm only experiencing, and a straight way would by fine for an answer.
I have an ObservableCollection<DayItem> in the DayPanel model, and in the Xaml there's an <ItemsPresenter />.
if i do
this.ItemsSource = DayItems;
everything show up fine.
but, i wanna be able to use those DayItems in the UI like a list... to support multi-select etc.
so i tried using a ContentControl, and set it's content to the ObservableCollection.
but it just shows the ObservableCollection object's ToString text.
so i guess i need a DataTemplete there...
but why do i need a DataTemple to show a Control?
it's already styled in it's own Xaml, i don't wanna repeat it's styling again.
or maybe i'm totally wrong, anyway i need help :x
Edit:
I got this to work, saying what DataType wasn't necessary or even possible.
and in the code behind i told the listbox, that it's ItemSource was the ObservableCollection.
now i've ran into other problems... ListBox related...
There are Gaps between each control in the ListBox, which messes up the layout
and also i need to figure out a way to select multiple items by dragging...
thanks for the help so fat
First, you need a view model for you DayItem user control. Lets call it DayItemViewModel. Also I suppose you DayPanel also has a view model called something like DayPanelViewModel. Then, you DayPanelViewModel would expose a collection of DayItemViewModel instances:
public class DayPanelViewModel
{
public ObservableCollection<DayItemViewModel> DayItems { get; set; }
}
Then, in your DayPanel.xaml:
<UserControl x:Class="DayPanel"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml">
<UserControl.Resources>
<DataTemplate x:Key="DayItemTemplate"
DataType="{x:Type my:DayItemViewModel}">
<my:DayItem />
</DataTemplate>
</UserControl.Resources>
<Grid>
<ListBox ItemsSource="{Binding DayItems}"
ItemTemplate="{StaticResource DayItemTemplate}" />
</Grid>
</UserControl>
Try using ListBox, since that implements multiselect...
Also it might be wise (for MVVM) if you do not contain DayItems, but DayItemModel's in your DayPanelModel, and set the ListBox's ItemTemplate to present each DayItemModel with a DayItem.