We Keep Coding

Pairing Bluetooth device with InTheHand 32Feet shows as paired, but can't connect

I'm facing a very strange three-way headache. I'm using Unity Engine and a BrainLink Bluetooth device as a source of input. I connect to the BrainLink device automatically via code using a library called Neurosky.ThinkGear and so far these two work fine together, but that's assuming the device has been paired manually via Bluetooth & Other Devices window.
Now I've been asked to also PAIR the device automatically, and this is where I hit a snag. Because using Unity Engine I can't use the windows runtime stuff (like Windows.Enumeration.Devices), I've decided to use the InTheHand 32Feet solution for Bluetooth devices and it seems to kind of work. The device appears as listed in Bluetooth & Other Devices if it wasn't already and it's listed as Paired as well. The problem is that when paired via code and not manually, the library that handles connecting to the device (aforementioned Neurosky.ThinkGear) can't connect to the device. It only connects if the device is removed and paired again via Bluetooth & Oher Devices window.
The Code I'm currently testing is as follows:
private void Start()
{
Debug.Log("Operation Start");
//btClient is a class field
btClient = new BluetoothClient();
//Search for existing paired devices that contain "brainlink" in their name
BluetoothDeviceInfo btDevice = CheckExistingPairedDevices();
if (btDevice == null)
{
Debug.Log("No paired device found, trying to discover");
//Try to discover devices in range with "brainlink" in their name
btDevice = TryDiscoverDevice();
}
if(btDevice!= null)
{
Debug.Log("Found Device " + btDevice.DeviceName+", checking for pairing");
bool paired = AttemptPair(btDevice);
Debug.Log("Pair Status: " + paired);
}
else
{
Debug.Log("Could not discover device");
}
CloseClient();
}
This is the method that handles pairing. At the moment, I never pass a value to pin but it's there just in case I need to support other devices in the future.
private bool AttemptPair(BluetoothDeviceInfo btDevice, string pin = null)
{
//Check if this device has been paired before
if (btDevice.Authenticated)
return true;
bool result = BluetoothSecurity.PairRequest(btDevice.DeviceAddress, pin);
btDevice.Refresh();
return result;
}

I have zero knowledge about your devices/tools, but what I know is that to establish a Bluetooth connection, we need to discover devices first.
The reason is that such a discovery creates an object that is later used on Bluetooth actions (e.g., pairing, connecting).
The device appears as listed in Bluetooth & Other Devices if it wasn't
already and it's listed as Paired as well.
I think by this, what you mean is previously paired devices. The device appearing on the list might not mean that the device is currently discovered. I suggest change your code accordingly where you perform discovery first.

How to map DirectInput (sharpDX) device to it's corresponding HID (C#)

What I need is a way to find out the curresponding HID of a SharpDX.DirectInput DeviceInstance.
What I have on DirectInput side is :
ProductId -> 00060079-0000-0000-0000-504944564944 (always the same)
InstanceId -> 8e3d89c0-6436-11e9-8004-444553540000 (dynamic / changes every time PC starts)
On HID side :
VendorID=0x0079
ProductID=0x0006,
Version=263,
DevicePath=\\?\hid#vid_0079&pid_0006#8&1ec29a1c&0&0000#{4d1e55b2-f16f-11cf-88cb-001111000030}
I can see that the HID vendorId and ProductId are used to build the DirectInput ProductId. the problem is that I have multiple controllers connected with the same VendorId and ProductId (they are the same brand)
is there a way to do this? to know the HID devicePath of an DirectInput InstanceId?
For context:
I'm writing a software to automatic configure many controllers on many emulators for my custom arcade machine. The emulators use a combination of DirectInput/XInput/DSUClient (https://github.com/v1993/cemuhook-protocol). So, for each connected controller, I need to know all controllers info to be able to correctly configure each one on each emulator.
For now as a (very bad) workaround, i'm listening to inputs from DirectInput separeted from HID and when the reading occurs I know that the HID device is the DirectInput device because they occured (almost) on the same time.
I've already tried "Win32_PnPEntity" with "ManagementObjectSearcher" but had no luck

There is DIPROP_GUIDANDPATH property that could be requested via IDirectInputDevice8::GetProperty API. It will return HID device path.
In SharpDX it is represented by SharpDX.DirectInput.PropertyGuidAndPath struct.

I ended up finding the solution...
DirectInput directInput = new DirectInput();
foreach (var deviceInstance in directInput.GetDevices())
{
var joystick = new Joystick(directInput, deviceInstance.InstanceGuid);
Console.WriteLine(joystick.Properties.InterfacePath)
}

BarcodeScanner found but not possible to connect with Windows.Devices.PointOfService

I have created a watcher to connect to BarcodeScanner using Windows.Devices.PointOfService
var watcher = DeviceInformation.CreateWatcher(BarcodeScanner.GetDeviceSelector());
var id = "";
watcher.Added += async (sender, information) =>
{
id = information.Id;
var barcodeScanner = await BarcodeScanner.FromIdAsync(id);
...
}
information parameter contains all data releted to my barcodeScanner, but when i try to get it with FromIdAsync is always null.
Those are data contained into information
- information {Windows.Devices.Enumeration.DeviceInformation} Windows.Devices.Enumeration.DeviceInformation
EnclosureLocation null Windows.Devices.Enumeration.EnclosureLocation
Id "\\\\?\\HID#VID_0536&PID_02E1&MI_01#c&d907bf5&0&0000#{c243ffbd-3afc-45e9-b3d3-2ba18bc7ebc5}\\POSBarcodeScanner" string
IsDefault false bool
IsEnabled true bool
Kind DeviceInterface Windows.Devices.Enumeration.DeviceInformationKind
Name "3800G" string
+ Pairing {Windows.Devices.Enumeration.DeviceInformationPairing} Windows.Devices.Enumeration.DeviceInformationPairing
+ Properties {System.__ComObject} System.Collections.Generic.IReadOnlyDictionary<string, object> {System.__ComObject}
+ Native View 0x1d148140 <Information not available, no symbols loaded for Windows.Devices.Enumeration.dll> IUnknown *
This device is listed as enabled to be accessed with POS.
Where I'm wrong? I have tried also to create the watcher behind a button click, but nothigs change.

If the model name of the scanner you are using is "3800G" as in the question code, it may not be supported by Windows.Devices.PointOfService.
A list of supported models is below.
Supported Point of Service Peripherals
If you want to use it with Windows.Devices.PointOfService, please change it to the model described in this.
In Addition:
Unified POS standard and Windows® Embedded for Point of Service are OPOS/POS for.NET/JavaPOS API. It is not Windows.Devices.PointOfService API.
That model is not listed on Honeywell's site.
And, sales agencies in Japan may be displayed as sales ended. Probably it is an old model. It is better to switch to a new model.
For example, the USB HID Bar code scanner mode setting is described on page 21 of the detailed manual of 1900 series.
If this mode setting description is not in the 3800G manual, you can not use Windows.Devices.PointOfService API on 3800G.
If you can set it, you will be able to use it if you install a device driver corresponding to this mode.

#Luigi Saggese,
You must first put this scanner into USB HID Barcode Scanner Mode. Please see Page 1-3 of the Honeywell 3800g Users Guide for the programming code to put the scanner into this mode.
Once the scanner is in this mode, you should see a POS Barcode Scanner node in Windows Device Manager. The specific scanner will show up in Device Manager as POS HID Barcode Scanner since it is using an in-box class driver which supports the USB HID POS Scanner protocol. At this point it should work with your Watcher.
Terry Warwick, Microsoft

Retrieve name of bluetooth device from rfcomm device services

The context is the following, we have multiple trucks that contains a bluetooth to serial device, we have given each truck bluetooth a unique name to be able to connect to a specific truck.
I use this code to retrieve all the RFComm services :
DeviceInformation.FindAllAsync(RfcommDeviceService.GetDeviceSelector(RfcommServiceId.SerialPort))
The problem is that all the DeviceInformation objects returned contains the name of the RFComm service in the Name property instead of the bluetooth device name. When my project was a Win 8 store app, all was fine since the name property contained the bluetooth device name.
I found that I could create a BluetoothDevice object using the device id returned by the above code, but then the app ask to use the bluetooth device for all devices until I find the good one. I would like to prevent that as it wasn't the case with Win 8 store app.
Second solution I found was to parse the device id of the RFComm service which look like this one
Bluetooth#Bluetooth00:c2:c6:56:b0:61-00:15:be:0f:02:d7#RFCOMM:00000000:{00001101-0000-1000-8000-00805f9b34fb}
to remove everything past "#RFCOMM" and use the DeviceInformation.CreateFromIdAsync() function. This works but I was wondering if there was a cleaner solution to my problem since parsing a string can be a real problem if the string format change.
Is there a way to retrieve the name of the bluetooth device without having to ask to use all bluetooth device until we find it?

You can try with following code to get the name of the Bluetooth device:
var serviceInfoCollection = await DeviceInformation.FindAllAsync(RfcommDeviceService.GetDeviceSelector(RfcommServiceId.SerialPort), new string[] { "System.Devices.AepService.AepId" });
foreach (var serviceInfo in serviceInfoCollection)
{
var deviceInfo = await DeviceInformation.CreateFromIdAsync((string)serviceInfo.Properties["System.Devices.AepService.AepId"]);
System.Diagnostics.Debug.WriteLine($"Device name is: '{deviceInfo.Name}' and Id is: '{deviceInfo.Id}'");
}
The key point here is that Bluetooth device is one type of AssociationEndpoint objects. AEPs usually represent a device discovered over a wireless or network protocol. An AssociationEndpoint object is a child of a single AssociationEndpointContainer object and can contain 0 or more AssociationEndpointService objects. And RFComm service is one AssociationEndpointService that Bluetooth device contains. For more info, please see DeviceInformationKind enumeration and Enumerate devices over a network.
AssociationEndpointService has several properties. One of them is System.Devices.AepService.AepId which represents the identifier of the parent AssociationEndpoint object. So we can use this property to get the Bluetooth device information and once we get the device information, we can get the device name easily. However System.Devices.AepService.AepId property is not a commen property in DeviceInformation. So we need to use DeviceInformation.FindAllAsync(String, IIterable(String)) method to require this additional propertie. For more info, please see Device information properties.

Get usb hardware or instance id using c#

I'am trying to get usb mass storage instance id for eject usb using devcon from last 2 days but not able to get that. I have tried alot of solutions but still failed.
ManagementObject dsk = new ManagementObject(#"win32_logicaldisk.deviceid=""j:""");
dsk.Get();
string id = dsk["VolumeSerialNumber"].ToString();
Console.WriteLine(id);
It returns instance id. when i pass this id to devcon it doesnt remove any device. Passing id to devcon in this way
Devcon remove usbstor\deviceID
is there any way to remove usb using device name as like G, H or I etc or get required instance id.
Any help will be appricated.

Try disabling UAC and also running devcon.exe under Administrator credentials.

I think #usblib can be helpfull for you , it allow you to play around usb divices #usblib