This generates a picturebox
PictureBox[][] picturebox;
public void loadPictureBox()
{
string path = #"../../Images/Catelogue/"; //set pathing
string[] list = Directory.GetFiles(path, "*.jpg");
//pictureboxCatelogue = new PictureBox[list.Length];
//pictureboxCosplay = new PictureBox[list.Length];
picturebox = new PictureBox[4][];
for (int i = 0; i < 4; i++)
{
picturebox[i] = new PictureBox[list.Length];
int y = 85, temp = 220, run = 0;
for (int index = 13; index < list.Length; index++) // loads all pictures and create pictureboxes
{
picturebox[i][index] = new PictureBox();
picturebox[i][index].Image = Image.FromFile(path + index + ".jpg");
this.Controls.Add(picturebox[i][index]);
temp = temp + 200;
if (index % 4 == 0)
{
if (run != 0)
y = y + 200;
run++;
temp = 220;
}
picturebox[i][index].Location = new Point(temp, y);
picturebox[i][index].Size = new Size(180, 180);
picturebox[i][index].Name = Convert.ToString(index);
picturebox[i][index].SizeMode = PictureBoxSizeMode.Zoom;
picturebox[i][index].BackColor = Color.FromArgb(35, 35, 35);
picturebox[i][index].Click += new System.EventHandler(PictureBox_Click);
}
}
}
I'm trying to hide a jagged array which is a picturebox in winsform c#, but i keep getting an error, is hiding a jagged array possible? This is the code that i'm having trouble with.
for (int i = 0; i < picturebox.Length; i++)
{
picturebox[0][i].Hide();
}
This is the error i get
ERROR : A first chance exception of type 'System.NullReferenceException' occurred in APPD Assignment 2.exe (Additional information: Object reference not set to an instance of an object.)
Aren't you using the wrong length here?
for (int i = 0; i < picturebox.Length; i++)
Should be
for (int i = 0; i < picturebox[0].Length; i++)
When you load the pictureboxes, you're only starting at index 13, so you either need to start the hide loop at 13, or check for null.
for (int i = 13; i < picturebox[0].Length; i++)
{ ... }
or
for (int i = 0; i < picturebox[0].Length; i++)
{
if (picturebox[0][i] != null)
{
picturebox[0][i].Hide();
}
}
I've run into a real headache here.
I have a small program, which displays some images stored on disk. 8 images are displayed in a listview at a time, but when the images are large enough, the memory use (according to the task manager) reaches more than 1300mb! I suspect that there are some images or something which aren't deallocated, but I seem to be unable to pinpoint exactly where. I have tried both disposing all images in listview.largeimagelist.images, tried Clear()'ing the imagelist, but it doesn't make a difference at all.
Here is the current code:
private void btnLoadNewImages_Click(object sender, EventArgs e)
{
int k = lsvImgResult.Items.Count;
for (k = lsvImgResult.Items.Count; k >= 1; k--)
{
Seen.Push((MyFile)lsvImgResult.Items[k - 1].Tag);
imageList.Images.Clear();
}
int i = 0;
lsvImgResult.Items.Clear();
DisplayedImages.Clear();
imageList.Images.Clear();
imageList.ImageSize = new Size(100, 100);
imageList.ColorDepth = ColorDepth.Depth32Bit;
int HowMany = 0;
if (UnSeen.Count >= 8)
{
HowMany = 8;
}
else
{
HowMany = UnSeen.Count;
}
for (i = 1; i <= HowMany; i++)
{
MyFile CurFile = UnSeen.Pop();
Image j = Image.FromFile(CurFile.Filename);
DisplayedImages.Enqueue(CurFile);
imageList.Images.Add(j);
}
lsvImgResult.LargeImageList = imageList;
for (int j = 0; j < imageList.Images.Count; j++)
{
ListViewItem lstItem = new ListViewItem();
lstItem.ImageIndex = j;
lstItem.Tag = DisplayedImages.Dequeue();
lstItem.ToolTipText = ((MyFile)lstItem.Tag).Filename;
lsvImgResult.Items.Add(lstItem);
}
tabImagesLeft.Text = "Images left: " + UnSeen.Count;
}
I have the following setup:
A TeeChart control with a Colorgrid, and a Points Series added to it:
grid = tChart2.Series[0] as Steema.TeeChart.Styles.ColorGrid;
points = tChart2.Series[1] as Steema.TeeChart.Styles.Points;
To init them, I do:
Random rnd = new Random();
for (int i = 0; i < 128; i++)
{
for (int j = 0; j < 128; j++)
{
grid.Add(j, rnd.Next(255), i);
}
}
for (int i = 0; i < 20; i++)
{
double x = rnd.Next();
double y = rnd.Next();
points.Add(x, y);
}
tChart2.Refresh();
And then I have a button on my form:
private void button1_Click(object sender, EventArgs e)
{
Random rnd = new Random();
for (int i = 0; i < 128; i++)
{
for (int j = 0; j < 128; j++)
{
grid.YValues[j + 128 * i] = rnd.Next(255);
}
}
for (int i = 0; i < 20; i++)
{
points.SetNull(i);
}
for (int i = 0; i < rnd.Next(20); i++)
{
points.XValues[i] = rnd.Next(128);
points.YValues[i] = rnd.Next(128);
}
points.BeginUpdate();
points.EndUpdate();
}
But the points do not get drawn. When I remove the for-loop containing the SetNull() statement, then they do get drawn, but I want to be able to clear the points (or hide the points don't want to be seen) without using the Points.Clear()/Points.Add(x, y) methodology.
I've also tried each of the following, but there's no difference.
points.TreatNulls = Steema.TeeChart.Styles.TreatNullsStyle.DoNotPaint;
points.TreatNulls = Steema.TeeChart.Styles.TreatNullsStyle.Ignore;
points.TreatNulls = Steema.TeeChart.Styles.TreatNullsStyle.Skip;
Does anyone know how to accomplish this?
Ok, the problem is caused when you set null all of points. You must know if you use method SetNull the point color is set transparent to make invisible the point. Therefore, if you want solve your problem you only need reset the colors of points you want visible, doing SetNull again or change the points color manually and combining the operation with TreatNullsStyle set to Ignore. In my opinion, I think the best option is use SetNull again as I do in next code:
public Form1()
{
InitializeComponent();
InitializeChart();
}
Steema.TeeChart.Styles.ColorGrid grid;
Steema.TeeChart.Styles.Points points;
private void InitializeChart()
{
grid = new ColorGrid(tChart1.Chart);
points = new Points(tChart1.Chart);
tChart1.Aspect.View3D = false;
Random rnd = new Random();
for (int i = 0; i < 128; i++)
{
for (int j = 0; j < 128; j++)
{
grid.Add(i, rnd.Next(255), j);
}
}
for (int i = 0; i < 20; i++)
{
double x = rnd.Next(100);
double y = rnd.Next(100);
points.Add(x, y);
}
}
private void button1_Click(object sender, EventArgs e)
{
Random rnd = new Random();
for (int i = 0; i < 128; i++)
{
for (int j = 0; j < 128; j++)
{
grid.YValues[j + 128 * i] = rnd.Next(255);
}
}
for (int i = 0; i < 20; i++)
{
points.SetNull(i);
}
for (int i = 0; i < rnd.Next(20); i++)
{
points.XValues[i] = rnd.Next(128);
points.YValues[i] = rnd.Next(128);
points.SetNull(i, false);
}
points.TreatNulls = TreatNullsStyle.Ignore;
}
Could you tell us if previous code works in correct way for you?
I hope will helps.
Thanks,
Objectives
Imagine that, we have matrix like
a11 a12 a13
a21 a22 a23
a31 a32 a33
What I want to do is, from textbox value rotate this matrix so that, for example if I write 2 and press rotate, program must keep both diagonal values of matrix (in this case a11, a22, a33, a13, a31) and rotate 2 times clockwise other values. So result must be like
a11 a32 a13
a23 a22 a21
a31 a12 a33
It must work for all N x N size matrices, and as you see every 4 rotation takes matrix into default state.
What I've done
So idea is like that, I have 2 forms. First takes size of matrix (1 value, for example if it's 5, it generates 5x5 matrix). When I press OK it generates second forms textbox matrix like that
Form 1 code
private void button1_Click(object sender, EventArgs e)
{
int matrixSize;
matrixSize = int.Parse(textBox1.Text);
Form2 form2 = new Form2(matrixSize);
form2.Width = matrixSize * 50 + 100;
form2.Height = matrixSize *60 + 200;
form2.Show();
//this.Hide();
}
Form 2 code generates textbox matrix from given value and puts random values into this fields
public Form2(int matrSize)
{
int counter = 0;
InitializeComponent();
TextBox[] MatrixNodes = new TextBox[matrSize*matrSize];
Random r = new Random();
for (int i = 1; i <= matrSize; i++)
{
for (int j = 1; j <= matrSize; j++)
{
var tb = new TextBox();
int num = r.Next(1, 1000);
MatrixNodes[counter] = tb;
tb.Name = string.Format("Node_{0}{1}", i, j);
Debug.Write(string.Format("Node_{0}{1}", i, j));
tb.Text = num.ToString();
tb.Location = new Point(j * 50, i * 50);
tb.Width = 30;
tb.Visible = true;
this.splitContainer1.Panel2.Controls.Add(tb);
counter++;
}
}
}
Form 2 has 1 textbox for controlling rotation (others are generated on the fly, programmatically). What I want to do is, when I enter rotation count and press Enter on this textbox, I want to rotate textbox matrix as I explained above. Can't figure out how to do it.
Copy both diagonals to separate arrays, then rotate your matrix and replace diagonals. Below code shows each step:
class Program
{
static void Main(string[] args)
{
int matrixSize = 3;
string[,] matrix = new string[matrixSize,matrixSize];
//create square matrix
for (int x = 0; x < matrixSize; x++)
{
for (int y = 0; y < matrixSize; y++)
{
matrix[x, y] = "a" + (x + 1).ToString() + (y + 1).ToString();
}
}
Console.WriteLine(Environment.NewLine + "Base square matrix");
for (int x = 0; x < matrixSize; x++)
{
for (int y = 0; y < matrixSize; y++)
{
Console.Write(matrix[x, y] + " ");
}
Console.Write(Environment.NewLine);
}
Console.ReadKey();
//copy diagonals
string[] leftDiagonal = new string[matrixSize];
string[] rightDiagonal = new string[matrixSize];
for (int x = 0; x < matrixSize; x++)
{
leftDiagonal[x] = matrix[x, x];
rightDiagonal[x] = matrix[matrixSize - 1 - x, x];
}
Console.WriteLine(Environment.NewLine + "Diagonals");
for (int x = 0; x < matrixSize; ++x)
{
Console.Write(leftDiagonal[x] + " " + rightDiagonal[x] + Environment.NewLine);
}
Console.ReadKey();
//rotate matrix
string[,] rotatedMatrix = new string[matrixSize, matrixSize];
for (int x = 0; x < matrixSize; x++)
{
for (int y = 0; y < matrixSize; y++)
{
rotatedMatrix[x, y] = matrix[matrixSize - y - 1, x];
}
}
Console.WriteLine(Environment.NewLine + "Rotated");
for (int x = 0; x < matrixSize; x++)
{
for (int y = 0; y < matrixSize; y++)
{
Console.Write(rotatedMatrix[x, y] + " ");
}
Console.Write(Environment.NewLine);
}
Console.ReadKey();
//rotate matrix again
string[,] rotatedMatrixAgain = new string[matrixSize, matrixSize];
for (int x = 0; x < matrixSize; x++)
{
for (int y = 0; y < matrixSize; y++)
{
rotatedMatrixAgain[x, y] = rotatedMatrix[matrixSize - y - 1, x];
}
}
Console.WriteLine(Environment.NewLine + "Rotated again");
for (int x = 0; x < matrixSize; x++)
{
for (int y = 0; y < matrixSize; y++)
{
Console.Write(rotatedMatrixAgain[x, y] + " ");
}
Console.Write(Environment.NewLine);
}
Console.ReadKey();
//replace diagonals
for (int x = 0; x < matrixSize; x++)
{
rotatedMatrixAgain[x, x] = leftDiagonal[x];
rotatedMatrixAgain[matrixSize - 1 - x, x] = rightDiagonal[x];
}
Console.WriteLine(Environment.NewLine + "Completed" + Environment.NewLine);
for (int x = 0; x < matrixSize; x++)
{
for (int y = 0; y < matrixSize; y++)
{
Console.Write(rotatedMatrixAgain[x, y] + " ");
}
Console.Write(Environment.NewLine);
}
Console.ReadKey();
}
}
I don't know C#, so I can only give a suggestion in pseudocode:
Input: An N by N matrix in
Output: The input matrix rotated as described in the OP out
for i = 1 to N
for j = 1 to N
if N - j != i and i != j // Do not change values on either diagonal
out[j][N-i] = in[i][j]
else
out[i][j] = in[i][j]
Disclaimer: This algorithm is untested. I suggest you use a debugger to check that it works as you want.
This seems like quite an unorthodox UI presentation, but you're not too far off in terms of being able to achieve your functionality. Instead of a linear array, a rectangular array will make your job much easier. The actual rotation could be implemented with a for loop repeating a single rotation (which would be implemented as in the case 1 code), but I've decided to combine them into the four possible cases. This actually allows you to enter a negative number for number of rotations. Which reminds me, you really should do more error checking. At least protect against int.Parse throwing an exception both places it's used (with a try catch block or by switching to int.TryParse) and make sure it returns a meaningful number (greater than 0, possibly set a reasonable maximum other than int.MaxValue) for matrixSize in button1_Click.
namespace RotatingMatrices
{
public class Form2 : Form
{
// note these class fields
private TextBox[,] matrixNodes;
private int matrixSize;
public Form2(int matrSize)
{
InitializeComponent();
// note these inits
matrixSize = matrSize;
matrixNodes = new TextBox[matrixSize, matrixSize];
Random r = new Random();
// note the new loop limits
for (int i = 0; i < matrixSize; i++)
{
for (int j = 0; j < matrixSize; j++)
{
var tb = new TextBox();
int num = r.Next(1, 1000);
// note the change in indexing
matrixNodes[i,j] = tb;
tb.Name = string.Format("Node_{0}_{1}", i, j);
Debug.Write(string.Format("Node_{0}_{1}", i, j));
tb.Text = num.ToString();
tb.Location = new Point(j * 50, i * 50);
tb.Width = 30;
tb.Visible = true;
this.splitContainer1.Panel2.Controls.Add(tb);
}
}
}
private void buttonRotate_Click(object sender, EventArgs e)
{
string[,] matrix = new string[matrixSize, matrixSize];
int rotations = (4 + int.Parse(textBoxRotations.Text)) % 4; // note the addition of and mod by 4
switch(rotations)
{
case 1: // rotate clockwise
for (int i = 0; i < matrixSize; i++)
{
for (int j = 0; j < matrixSize; j++)
{
matrix[j, matrixSize - i - 1] = matrixNodes[i, j].Text;
}
}
break;
case 2: // rotate 180 degrees
for (int i = 0; i < matrixSize; i++)
{
for (int j = 0; j < matrixSize; j++)
{
matrix[i, j] = matrixNodes[matrixSize - i - 1, matrixSize - j - 1].Text;
}
}
break;
case 3: // rotate counter-clockwise
for (int i = 0; i < matrixSize; i++)
{
for (int j = 0; j < matrixSize; j++)
{
matrix[i, j] = matrixNodes[j, matrixSize - i - 1].Text;
}
}
break;
default: // do nothing
return;
}
// restore diagonals
for(int i = 0; i < matrixSize; i++)
{
matrix[i, i] = matrixNodes[i, i].Text;
matrix[i, matrixSize - i - 1] = matrixNodes[i, matrixSize - i - 1].Text;
}
// write strings back to text boxes
for (int i = 0; i < matrixSize; i++)
{
for (int j = 0; j < matrixSize; j++)
{
matrixNodes[i, j].Text = matrix[i, j];
}
}
}
}
}
I decided to tackle the issue using a listView instead of a text box, which makes the logic easier for me. Using this method, I was able to think of the matrix as successive boxes. I start on the outside and move in toward the middle, changing the size of my box each time.
Also, rather than using two forms, I use one. At the top I have a textbox where the user enters the size they want the array to be, and a button labeled "Fill" (button2). And at the bottom I have a textbox where the user enters the degree of rotation. When they click "Rotate," it kicks off a process of adding values to linked lists, combining and shifting the list, and then writing back out to the matrix. I'm sure I made it more convoluted than it has to be, but it was a great learning exercise.
After looking over jerry's code above, I think I'm going to look into rectangular arrays. :)
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
namespace Recycle
{
public partial class Form1 : Form
{
public int size;
public LinkedList<string> topRight = new LinkedList<string>();
public LinkedList<string> bottomLeft = new LinkedList<string>();
public LinkedList<string> myMatrix = new LinkedList<string>();
public LinkedList<string> shiftMatrix = new LinkedList<string>();
public Form1()
{
InitializeComponent();
}
private void button2_Click(object sender, EventArgs e)
{
listView1.Clear();
size = int.Parse(textBox2.Text);
int c = 0;
int q = 0;
int w = 0;
string[] content = new string[size];
Random rnd = new Random();
for (c = 0; c < size; c++)
{
listView1.Columns.Add("", 25);
}
for (q = 0; q < size; q++)
{
for (w = 0; w < size; w++)
{
content[w] = rnd.Next(9,100).ToString();
}
ListViewItem lvi = new ListViewItem(content);
listView1.Items.Add(lvi);
}
}
public bool iseven(int size)
{
if (size % 2 == 0)
{
return true;
}
else
{
return false;
}
}
public void button1_Click(object sender, EventArgs e)
{
if (listView1.Items.Count < 3)
{
MessageBox.Show("Matrix cannot be rotated.");
return;
}
bool even = false;
int shift = int.Parse(textBox1.Text); //amount to shift by
int box = listView1.Items.Count - 1; //size of box
int half = Convert.ToInt32(listView1.Items.Count / 2);
int corner = 0; //inside corner of box
if (shift > listView1.Items.Count)
{
shift = shift % ((listView1.Items.Count - 2) * 4);
}
do
{
eachPass(shift, box, corner);
++corner;
--box;
} while (box >= half + 1);
}
public void eachPass(int shift, int box, int corner)
{
int x;
int i;
//Read each non-diagonal value into one of two lists
for (x = corner + 1; x < box; x++)
{
topRight.AddLast(listView1.Items[corner].SubItems[x].Text);
}
x = box;
for (i = corner + 1; i < box; i++)
{
topRight.AddLast(listView1.Items[i].SubItems[x].Text);
}
for (x = box - 1; x > corner; x--)
{
bottomLeft.AddLast(listView1.Items[box].SubItems[x].Text);
}
x = corner;
for (i = box - 1; i > corner; i--)
{
bottomLeft.AddLast(listView1.Items[i].SubItems[x].Text);
}
string myTest = "";
//join the two lists, so they can be shifted
foreach (string tR in topRight)
{
myMatrix.AddLast(tR);
}
foreach (string bL in bottomLeft)
{
myMatrix.AddLast(bL);
}
int sh;
//shift the list using another list
for (sh = shift; sh < myMatrix.Count; sh++)
{
shiftMatrix.AddLast(myMatrix.ElementAt(sh));
}
for (sh = 0; sh < shift; sh++)
{
shiftMatrix.AddLast(myMatrix.ElementAt(sh));
}
//we need the sizes of the current lists
int trCnt = topRight.Count;
int blCnt = bottomLeft.Count;
//clear them for reuse
topRight.Clear();
bottomLeft.Clear();
int s;
//put the shifted values back
for (s = 0; s < trCnt; s++)
{
topRight.AddLast(shiftMatrix.ElementAt(s));
}
for (s = blCnt; s < shiftMatrix.Count; s++)
{
bottomLeft.AddLast(shiftMatrix.ElementAt(s));
}
int tRn = 0;
int bLn = 0;
//write each non-diagonal value from one of two lists
for (x = corner + 1; x < box; x++)
{
listView1.Items[corner].SubItems[x].Text = topRight.ElementAt(tRn);
++tRn;
}
x = box;
for (i = corner + 1; i < box; i++)
{
listView1.Items[i].SubItems[x].Text = topRight.ElementAt(tRn);
++tRn;
}
for (x = box - 1; x > corner; x--)
{
listView1.Items[box].SubItems[x].Text = bottomLeft.ElementAt(bLn);
++bLn;
}
x = corner;
for (i = box - 1; i > corner; i--)
{
listView1.Items[i].SubItems[x].Text = bottomLeft.ElementAt(bLn);
++bLn;
}
myMatrix.Clear();
shiftMatrix.Clear();
topRight.Clear();
bottomLeft.Clear();
}
}
}
I want to draw 16*64 matrix, each one containing a:
Microsoft.VisualBasic.PowerPacks.OvalShape.
I used this:
List<Microsoft.VisualBasic.PowerPacks.OvalShape> ovalShape =
new List<Microsoft.VisualBasic.PowerPacks.OvalShape>();
for (int i = 0; i < 16; i++)
{
for (int j = 0; j < 64; j++)
{
OvalShape ovl = new OvalShape();
ovl.Width = 20;
ovl.Height = 20;
ovl.FillStyle = FillStyle.Solid;
ovl.FillColor = Color.Green;
ovalShape.Add(ovl);
}
}
How can I show it in the Window?
Creating a separate container for each shape is not required. Also you can skip the additional container list for the shapes. So you could use this very compact code.
var ovalShapes = new Microsoft.VisualBasic.PowerPacks.ShapeContainer()
{
Dock = DockStyle.Fill,
Margin = new Padding(0),
Padding = new Padding(0),
};
for (int i = 0; i < 16; i++)
for (int j = 0; j < 64; j++)
ovalShapes.Shapes.Add(
new Microsoft.VisualBasic.PowerPacks.OvalShape()
{
Width = 20,
Height = 20,
FillStyle = Microsoft.VisualBasic.PowerPacks.FillStyle.Solid,
FillColor = Color.Green,
Location = new Point(20 * i, 20 * j),
});
this.Controls.Add(ovalShapes);
From MSDN:
An OvalShape control cannot be displayed directly on a form or
container control; it must be contained in a ShapeContainer object.
After you initialize an OvalShape, you will have to set its Parent
property either to an existing ShapeContainer or to a new instance of
ShapeContainer.
Try to set Location and add your controls to the Form:
List<Microsoft.VisualBasic.PowerPacks.OvalShape> ovalShape = new List<Microsoft.VisualBasic.PowerPacks.OvalShape>();
for (int i = 0; i < 16; i++)
{
for (int j = 0; j < 64; j++)
{
OvalShape ovl = new OvalShape();
ovl.Width = 20;
ovl.Height = 20;
ovl.FillStyle = FillStyle.Solid;
ovl.FillColor = Color.Green;
ovl.Location = new Point(ovl.Width*i, ovl.Height*j);
ovalShape.Add(ovl);
}
}
foreach(OvalShape os in ovalShape)
{
Microsoft.VisualBasic.PowerPacks.ShapeContainer shapeContainer = new Microsoft.VisualBasic.PowerPacks.ShapeContainer();
Control c = new Control();
shapeContainer.Parent = c;
os.Parent = shapeContainer;
myForm.Controls.Add(c);
}
First simplify
int totalCount = 1024; //16*64
const int shapeWidth =20;
const int shapeHeight = 20;
for (int j = 0; j < totalCount; j++)
{
OvalShape ovl = new OvalShape();
ovl.Width = shapeWidth;
ovl.Height = shapeHeight;
ovl.FillStyle = FillStyle.Solid;
ovl.FillColor = Color.Green;
ovalShape.Add(ovl);
}
After pickup your drawing area and decide how much shapes per row you would like to have.
So some hypothetical code could look like this:
int shapesPerRowCount = 5;
int yPos = 0;
for(int i=0;i<ovalShape.Count;i++)
{
if(i % shapesPerRowCount == 0) //reach end of the row, so offset Y position by Height
yPos += shapeHeight;
int xPos = i*shapeWidth;
DrawShapeAtPos(ovalShape[i], xPos, yPos); //some special function that draws the shape
}
A very generic code, but just to provide you an idea.
If it's not what you're searching for, please clarify.