I have a little complication i encounter.
I may not be expert in TCP Connections but i hope someone here would help me.
This is my Client Code:
void Connect(String server, String message)
{
try
{
Int32 port = 8968;
TcpClient client = new TcpClient(server, port);
Byte[] data = File.ReadAllBytes(curSelectedFile);
NetworkStream stream = client.GetStream();
Byte[] fileData = File.ReadAllBytes(curSelectedFile);
Byte[] msgData = Encoding.ASCII.GetBytes("SendFile");
Byte[] sendData = new byte[fileData.Length + msgData.Length];
// Copy data to send package.
msgData.CopyTo(sendData, 0);
fileData.CopyTo(sendData, 4);
// Send the message to the connected TcpServer.
stream.Write(data, 0, data.Length);
Console.WriteLine("Sent: {0}", message);
// Receive the TcpServer.response.
// Buffer to store the response bytes.
data = new Byte[256];
// String to store the response ASCII representation.
String responseData = String.Empty;
// Read the first batch of the TcpServer response bytes.
Int32 bytes = stream.Read(data, 0, data.Length);
responseData = System.Text.Encoding.ASCII.GetString(data, 0, bytes);
Console.WriteLine("Received: {0}", responseData);
// Close everything.
stream.Close();
client.Close();
}
catch (ArgumentNullException e)
{
Console.WriteLine("ArgumentNullException: {0}", e);
}
catch (SocketException e)
{
Console.WriteLine("SocketException: {0}", e);
}
Console.WriteLine("\n Press Enter to continue...");
Console.Read();
}
This is my server one:
// Listen loop.
while(true)
{
using (TcpClient tcpClient = myListener.AcceptTcpClient())
{
Console.WriteLine("[Server] Acceptam client.");
using (NetworkStream networkStream = tcpClient.GetStream())
{
// Buffer for reading data
Byte[] bytes = new Byte[1024];
var data = new List<byte>();
int length;
while ((length = networkStream.Read(bytes, 0, bytes.Length)) != 0)
{
var copy = new byte[length];
Array.Copy(bytes, 0, copy, 0, length);
data.AddRange(copy);
}
// Incercam sa vedem ce doreste clientul.
string msg = Encoding.ASCII.GetString(data[0], 0, length);
if(msg.StartsWith("SendFile"))
{
using (Stream stream = new FileStream(#"C:\test.mp3", FileMode.Create, FileAccess.ReadWrite))
{
BinaryFormatter binaryFormatter = new BinaryFormatter();
networkStream.Position = 4;
binaryFormatter.Serialize(networkStream, data.ToArray());
}
}
}
}
}
What i'm trying to do here:
- I want the client to send a Message.. like "SaveFile" & after this string to be the filedata.
- The server should read the client message, and to process stuff according to the Client sentstring, before doing something with the file.
I believe that i don't know how to do it.
May i have an example on how to send/receive and read certain strings from the beggining of the file? How i can put them in the byte array and how to read it... It's quite overwhelming..
PS: The current Server Code is reading the data and CAN write as i coded it, without losing any packages. But also he's writing the aditional packets i sent before i converted the bytes of the file.
networkStream.Position = 4; isn't legal, because NetworkStream is not seekable.
I would discourage you from mixing text and binary data, just because of the complication it makes in the application protocol. But if you really want to do that, you should use BinaryWriter and BinaryReader, because it can write strings to a stream which can then be read later without consuming the bytes after the string.
Then you can do something like this...
In the client:
BinaryWriter writer = new BinaryWriter(networkStream);
writer.Write("SendFile");
writer.Write(fileData.Length);
writer.Write(fileData);
In the server:
BinaryReader reader = new BinaryReader(networkStream);
switch (reader.ReadString())
{
case "SendFile":
{
int length = reader.ReadInt32();
byte[] fileData = reader.ReadBytes(length);
// ... then do whatever with fileData, like write to a file
break;
}
}
The BinaryWriter/Reader implementation of the length-counted string is non-standard, so if you wanted to interact with any other non-.NET code using this technique, it would be more complicated because you have to replicate/reimplement the non-standard length-counting logic yourself.
IMHO a better approach is to encode commands as fixed-length data, e.g. an 8-, 16-, or 32-bit value, which is just some integer that specifies the command. Then you can list your commands in the code as an enum type, casting to/from the network stream for the I/O. This would be more portable, easier to implement on non-.NET platforms.
Related
I am sending very large file over TCP/IP network which is working as expected.
Just one concern that how to send it efficiently so that memory consumption should be optimized.
Below is the working code
Stream fileStream = File.OpenRead(tbFilename.Text);
byte[] fileBuffer = new byte[fileStream.Length];
fileStream.Read(fileBuffer, 0, (int)fileStream.Length);
// Open a TCP/IP Connection and send the data
TcpClient clientSocket = new TcpClient(tbServer.Text,8080);
NetworkStream networkStream = clientSocket.GetStream();
networkStream.Write(fileBuffer,0,fileBuffer.GetLength(0));
networkStream.Close();
Firstly, Stream.Read will probably not read the whole file just a chunk, but you omit the return value, which is the number of read bytes.
Secondly, you should use a smaller buffer (eg. 4K) and use that to send the file.
const int BUFSIZE = 4096;
long transferred = 0L;
long length = fileStream.Length;
using (BinaryReader br = new BinaryReader(fileStream))
{
while (transferred < length)
{
int chunkSize = Math.Min(length - transferred, BUFSIZE);
byte[] buffer = br.ReadBytes(chunkSize);
networkStream.Write(buffer, 0, chunkSize);
transferred += chunkSize;
// here you can even report some progress to adjust a ProgressBar or something
}
}
You can use Stream.CopyTo() to copy data from a source stream into another.
The CopyTo() method uses a temporary buffer as suggested by taffer.
Do not forget to Flush() the network stream afterwards.
using (Stream fileStream = File.OpenRead(tbFilename.Text))
{
TcpClient clientSocket = new TcpClient(tbServer.Text, 8080);
NetworkStream networkStream = clientSocket.GetStream();
fileStream.CopyTo(networkStream);
networkStream.Flush();
networkStream.Close();
clientSocket.Close();
}
I am trying to write a simple client/server application in C#. The following is an example server reply sent to my client:
reply {20}<entry name="test"/>
where {20} indicates number of chars that full reply contains.
In the code I wrote below how can I use this number to loop and read ALL chars?
TcpClient tcpClient = new TcpClient(host, port);
NetworkStream networkStream = tcpClient.GetStream();
...
// Server Reply
if (networkStream.CanRead)
{
// Buffer to store the response bytes.
byte[] readBuffer = new byte[tcpClient.ReceiveBufferSize];
// String that will contain full server reply
StringBuilder fullServerReply = new StringBuilder();
int numberOfBytesRead = 0;
do
{
numberOfBytesRead = networkStream.Read(readBuffer, 0, readBuffer.Length);
fullServerReply.AppendFormat("{0}", Encoding.UTF8.GetString(readBuffer, 0, tcpClient.ReceiveBufferSize));
} while (networkStream.DataAvailable);
}
You're not using numberOfBytesRead. It is fascinating to me that every 2nd TCP question has this same issue as its answer.
Apart from that, you cannot split UTF-8 encoded string at arbitrary boundaries. Encoding.UTF8.GetString will return garbage. Use StreamReader.
The code is just horribly wrong. #usr already pinpointed two big mistakes.
Here is corrected code:
// Server Reply
if (networkStream.CanRead) {
// Buffer to store the response bytes.
byte[] readBuffer = new byte[tcpClient.ReceiveBufferSize];
string fullServerReply = null;
using (var writer = new MemoryStream()) {
while (networkStream.DataAvailable) {
int numberOfBytesRead = networkStream.Read(readBuffer, 0, readBuffer.Length);
if (numberOfBytesRead <= 0) {
break;
}
writer.Write(readBuffer, 0, numberOfBytesRead);
}
fullServerReply = Encoding.UTF8.GetString(writer.ToArray());
}
}
In my client/server application my client wiil communicate with the server for 2 functions: the client will either request data from the server or it will send data so the server will save it. I'm using one socket for both methods, and the method to be used is defined by the first byte sent. If the first byte is "1" it is requesting data. If it is "2", it will send data (data bytes are sent after the "2" byte). It works perfectly for sending data. But when I'm requesting data it works, as long as I don't read the socket stream in the client. It's like if I make the client read data after sending data, the server will have no data to read, and it just crashes when trying to read the data.
Here is my server code:
private const int BufferSize = 1024;
NetworkStream netstream = null;
byte[] RecData = new byte[BufferSize];
int RecBytes;
try {
netstream = clientSocket.GetStream();
int totalrecbytes = 0;
using (MemoryStream ms = new MemoryStream()) {
//When I get here, there is no data to read
while ((RecBytes = netstream.Read(RecData, 0, RecData.Length)) > 0) {
ms.Write(RecData, 0, RecBytes);
totalrecbytes += RecBytes;
}
byte[] bytes = ms.ToArray();
byte b = bytes[0];
switch (b) {
case 1:
//Here I gather data and put it in "stream" variable
byte[] SendingBuffer = null;
int NoOfPackets = Convert.ToInt32(Math.Ceiling(Convert.ToDouble(stream.Length) / Convert.ToDouble(BufferSize)));
int TotalLength = (int)stream.Length, CurrentPacketLength, counter = 0;
for (int i = 0; i < NoOfPackets; i++) {
if (TotalLength > BufferSize) {
CurrentPacketLength = BufferSize;
TotalLength = TotalLength - CurrentPacketLength;
}
else
CurrentPacketLength = TotalLength;
SendingBuffer = new byte[CurrentPacketLength];
stream.Read(SendingBuffer, 0, CurrentPacketLength);
netstream.Write(SendingBuffer, 0, (int)SendingBuffer.Length);
}
netstream.Flush();
}
catch (Exception e) {
Console.WriteLine("EXCEPTION:\n" + e.ToString());
}
break;
case 2:
//Code to read data
break;
}
}
netstream.Close()
clientSocket.Close();
And here is my client code:
using (System.Net.Sockets.TcpClient clientSocket = new System.Net.Sockets.TcpClient()) {
string returnData = "";
IAsyncResult ar = clientSocket.BeginConnect("127.0.0.1", 8080, null, null);
System.Threading.WaitHandle wh = ar.AsyncWaitHandle;
try {
if (!ar.AsyncWaitHandle.WaitOne(TimeSpan.FromSeconds(5), false)) {
clientSocket.Close();
Console.WriteLine("Timeout");
return;
}
System.Net.Sockets.NetworkStream serverStream = clientSocket.GetStream();
byte b = 1;
byte[] outStream = { b };
serverStream.Write(outStream, 0, outStream.Length);
serverStream.Flush();
//If I comment following lines, the server can read sent data, but server can't otherwise
byte[] RecData = new byte[1024];
int RecBytes;
int totalrecbytes = 0;
MemoryStream MS = new MemoryStream();
while ((RecBytes = serverStream.Read(RecData, 0, RecData.Length)) > 0) {
MS.Write(RecData, 0, RecBytes);
totalrecbytes += RecBytes;
}
serverStream.Close();
clientSocket.Close();
clientSocket.EndConnect(ar);
}
catch (Exception ex) {
Console.WriteLine("Exceção: " + ex.ToString());
}
finally {
wh.Close();
}
}
So, how can I send data to server and read the response? (I tried even putting the thread to sleep after sending data, with no luck.)
Thanks in advance.
EDIT:
With some debug messages I discovered that the server do read the "1" byte that was sent, but somehow it gets stuck inside the while loop, like, the server just stops there, no more loops and it does not leave the while loop. I saw that after writing "loop" in console inside the while loop, and writing read bytes also in console. It wrote "loop" once, and the read byte.
This code worries me:
//When I get here, there is no data to read
while ((RecBytes = netstream.Read(RecData, 0, RecData.Length)) > 0) {
ms.Write(RecData, 0, RecBytes);
totalrecbytes += RecBytes;
}
You are reading until the client closes the connection (or shuts down sending, which you don't do). But the client only closes when the server has replied. The server reply will never come. It is a deadlock.
Solution: Read a single byte to determine the requests command (b).
Unrelated to the question, your "packetised" sending (NoOfPackets, ...) does not seem to serve any purpose. Just use Stream.Copy to write. TCP does not have packets.
An even better solution would be to abandon your custom TCP protocol and use an HTTP library. All these concerns just go away. There are various smaller problems with your code that are very typical to see in TCP code.
I'm having trouble getting a socket connection between Android(client) and a c# app(server) to read a response correctly.
I've successfully got a message sending from android to c#, and I'm reading it fine on that end. But when I try to send an acknowledgement back to android, I don't know the correct way to handle this, and I've had to make some assumptions where tutorials have been unclear. I am getting a response back in android, but it's not 100% correct. I've verified via Wireshark that c# is sending what I want it to send, and the text looks fine until it gets to android.
C#:
public void SendClientMessage()
{
NetworkStream clientStream = _Client.GetStream();
ASCIIEncoding encoder = new ASCIIEncoding();
byte[] buffer = encoder.GetBytes("Hello Client!"); //Static test message
clientStream.Write(buffer, 0, buffer.Length);
clientStream.Flush();
}
...
Android:
private void listenResponse()
{
Log.i(TAG, "listenRespose() Listening...");
try
{
InputStream is = socket.getInputStream();
BufferedInputStream bis = new BufferedInputStream(is);
byte[] buffer = new byte[1024];
int countBytesRead = bis.read(buffer, 0, 8);
String response = new String(buffer);
Log.i(TAG, "listenResponse() Heard: " + response);
}
catch (IOException e)
{
Log.e(TAG, "listenResponse() IOException", e);
e.printStackTrace();
}
Log.i(TAG, "listenResponse() Done Listening.");
}
...
WireShark shows:
Hello Client!
...
Android LogCat shows:
listenRespose() Listening...
listenResponse() Heard: Hello Cl??????????????????????????? [... ?s continue for a long time]
listenResponse() Done Listening.
If instead I initialize my String like this:
String response = new String(buffer, 0, countBytesRead);
I don't get all the question marks at least, but I still don't get the full string I should be getting. Am I initializing my byte[] wrong, or is there a different way to do this better suited for plain text?
You only read 8 bytes here
int countBytesRead = bis.read(buffer, 0, 8);
// max bytes to read ^
instead, read all you can:
int countBytesRead = bis.read(buffer, 0, Buffer.length);
The question marks you see are because your buffer is not initialized.
I'm creating a socket server that needs to continuously listen for incoming messages from the connected clients. Those messages will be sent in a byte[] array. I had the server working great with a StreamReader but StreamReader only works with textual represenations of the data being sent...not byte[] arrays.
Here's what I had:
StreamReader reader = new StreamReader(Client.GetStream());
string line = "";
while (true)
{
line = reader.ReadLine();
if (!string.IsNullOrEmpty(line))
{
parentForm.ApplyText(line + "\r\n");
SocketServer.SendBroadcast(line);
}
}
I need to now convert that into a raw stream somehow that will convert the stream contents into a byte[] array but I can't seem to get a handle on it.
I tried this:
while (true)
{
var bytes = default(byte[]);
using (var memstream = new MemoryStream())
{
var buffer = new byte[512];
var bytesRead = default(int);
while ((bytesRead = reader.BaseStream.Read(buffer, 0, buffer.Length)) > 0)
memstream.Write(buffer, 0, bytesRead);
bytes = memstream.ToArray();
}
//parentForm.ApplyText(bytes.Length + "\r\n");
}
but as you might guess, the while(true) loop doesn't quite work how I need it to. Can anyone help me with some code adjustment to make this work as I need it to. It needs to continuously listen for incoming messages, then when a message is received, it needs to do something with that message (the byte[] array) then go back to listening again.
TIA
I guess "listening continuously" is not task of reader its a task of listener. I ran into same problem when i was writing server using TcpListener. I am not sure what you want to do but i am posting solution for your "listening continuous" and reading into byte[] problem. I guess this code might help you:
TcpListener t = new TcpListener(IPAddress.Loopback, _port);
t.Start();
Console.WriteLine("Server is started and waiting for client\n\n");
byte[] buff = new byte[255];
NetworkStream stream;
TcpClient client;
while(true)
{
client = t.AcceptTcpClient();
if (!client.Connected)
return;
stream = client.GetStream();
while ((stream.Read(buff, 0, buff.Length)) != 0)
{
break;
}
if (0 != buff.Length)
break;
}
There's no need to convert anything. GetStream() returns a NetworkStream. See the sample Microsoft includes in the NetworkStream.Read Method. All you have to do is replace the myCompleteMessage.AppendFormat("{0}", Encoding.ASCII.GetString(myReadBuffer, 0, numberOfBytesRead)); line with an appropriate storage mechanism.