Related
What are the ways to Check SPF records on a domain?
There is a website where i can do it manually using - http://www.mxtoolbox.com/SuperTool.aspx
How can i do it via ASP.NET and C#? Basically i want to verify/check SPF records on a domain if its supporting out own mail web server.
I have the same problem, and managed to find two three solutions:
The nslookup solution
You can get the SPF by typing the following command in the command line:
nslookup -type=TXT <hostname>
You can automate this in C# using System.Diagonstics.Process, as described in this blog post.
The DNS.NET Resolver project
I found this CodeProject article about DNS resolution. It comes with demo project. I ran the project and got the following result for stackexchange.com:
Note: Make sure that the QType field is set to TXT before you press the Send button
The section highlighted in yellow represents the SPF record. I haven't yet dug into the code to see how it's done, but this seems like a good alternative to the nslookup solution above.
[Update] The ARSoft.Tools.Net project
If all you need to do is check whether a domain supports a mail server, you can use the ARSoft.Tools.Net library (also available as a NuGet Package).
After installing the package, I managed to perform the SPF check with this code:
var spfValidator = new ARSoft.Tools.Net.Spf.SpfValidator();
var mailIpAddress = IPAddress.Parse("X.X.X.X");
var domain = "example.com";
var senderAddress = "sender#example.com";
ARSoft.Tools.Net.Spf.SpfQualifier result =
spfValidator.CheckHost(mailIpAddress, domain, senderAddress);
Even though .NET has a lot of support for networking including doing host name to address mapping it lacks a general way to query DNS.
However, you can use P/Invoke to call the DnsQuery function directly. The API is somewhat cumbersome but it is not impossible to create the correct P/Invoke signature for your requirement.
A SPF record is stored as a TXT record in DNS. The corresponding structure you will have to work with is the DNS_TXT_DATA structure. If you can find an example of querying a MX record you can reuse the code and use DNS_TYPE_TEXT for the query type and unmarshal the data to a DNS_TXT_DATA structure.
Or you could just use this code:
using System.ComponentModel;
using System.Runtime.InteropServices;
public String DnsGetTxtRecord(String name) {
const Int16 DNS_TYPE_TEXT = 0x0010;
const Int32 DNS_QUERY_STANDARD = 0x00000000;
const Int32 DNS_ERROR_RCODE_NAME_ERROR = 9003;
const Int32 DNS_INFO_NO_RECORDS = 9501;
var queryResultsSet = IntPtr.Zero;
try {
var dnsStatus = DnsQuery(
name,
DNS_TYPE_TEXT,
DNS_QUERY_STANDARD,
IntPtr.Zero,
ref queryResultsSet,
IntPtr.Zero
);
if (dnsStatus == DNS_ERROR_RCODE_NAME_ERROR || dnsStatus == DNS_INFO_NO_RECORDS)
return null;
if (dnsStatus != 0)
throw new Win32Exception(dnsStatus);
DnsRecordTxt dnsRecord;
for (var pointer = queryResultsSet; pointer != IntPtr.Zero; pointer = dnsRecord.pNext) {
dnsRecord = (DnsRecordTxt) Marshal.PtrToStructure(pointer, typeof(DnsRecordTxt));
if (dnsRecord.wType == DNS_TYPE_TEXT) {
var lines = new List<String>();
var stringArrayPointer = pointer
+ Marshal.OffsetOf(typeof(DnsRecordTxt), "pStringArray").ToInt32();
for (var i = 0; i < dnsRecord.dwStringCount; ++i) {
var stringPointer = (IntPtr) Marshal.PtrToStructure(stringArrayPointer, typeof(IntPtr));
lines.Add(Marshal.PtrToStringUni(stringPointer));
stringArrayPointer += IntPtr.Size;
}
return String.Join(Environment.NewLine, lines);
}
}
return null;
}
finally {
const Int32 DnsFreeRecordList = 1;
if (queryResultsSet != IntPtr.Zero)
DnsRecordListFree(queryResultsSet, DnsFreeRecordList);
}
}
[DllImport("Dnsapi.dll", EntryPoint = "DnsQuery_W", ExactSpelling = true, CharSet = CharSet.Unicode, SetLastError = true)]
static extern Int32 DnsQuery(String lpstrName, Int16 wType, Int32 options, IntPtr pExtra, ref IntPtr ppQueryResultsSet, IntPtr pReserved);
[DllImport("Dnsapi.dll")]
static extern void DnsRecordListFree(IntPtr pRecordList, Int32 freeType);
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)]
struct DnsRecordTxt {
public IntPtr pNext;
public String pName;
public Int16 wType;
public Int16 wDataLength;
public Int32 flags;
public Int32 dwTtl;
public Int32 dwReserved;
public Int32 dwStringCount;
public String pStringArray;
}
Building on the answer by Martin Liversage, I've added some comments that explain what's going on, and adjusted to return multiple records if they exist.
My example also concatenates multiple strings in a TXT record rather than separating by line breaks.
I don't know if the if (dnsRecord.wType == DNS_TYPE_TEXT) line is really necessary considering that constraint is in the arguments to the DnsQuery function, but I preserved it from Martin's answer anyway.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Runtime.InteropServices;
using System.Text;
namespace Util
{
/// <summary>
/// Based on https://stackoverflow.com/a/11884174 (Martin Liversage)
/// </summary>
class DnsInterop
{
private const short DNS_TYPE_TEXT = 0x0010;
private const int DNS_QUERY_STANDARD = 0x00000000;
private const int DNS_ERROR_RCODE_NAME_ERROR = 9003;
private const int DNS_INFO_NO_RECORDS = 9501;
public static IEnumerable<string> GetTxtRecords(string domain)
{
var results = new List<string>();
var queryResultsSet = IntPtr.Zero;
DnsRecordTxt dnsRecord;
try
{
// get all text records
// pointer to results is returned in queryResultsSet
var dnsStatus = DnsQuery(
domain,
DNS_TYPE_TEXT,
DNS_QUERY_STANDARD,
IntPtr.Zero,
ref queryResultsSet,
IntPtr.Zero
);
// return null if no records or DNS lookup failed
if (dnsStatus == DNS_ERROR_RCODE_NAME_ERROR
|| dnsStatus == DNS_INFO_NO_RECORDS)
{
return null;
}
// throw an exception if other non success code
if (dnsStatus != 0)
throw new Win32Exception(dnsStatus);
// step through each result
for (
var pointer = queryResultsSet;
pointer != IntPtr.Zero;
pointer = dnsRecord.pNext)
{
dnsRecord = (DnsRecordTxt)
Marshal.PtrToStructure(pointer, typeof(DnsRecordTxt));
if (dnsRecord.wType == DNS_TYPE_TEXT)
{
var builder = new StringBuilder();
// pointer to array of pointers
// to each string that makes up the record
var stringArrayPointer = pointer + Marshal.OffsetOf(
typeof(DnsRecordTxt), "pStringArray").ToInt32();
// concatenate multiple strings in the case of long records
for (var i = 0; i < dnsRecord.dwStringCount; ++i)
{
var stringPointer = (IntPtr)Marshal.PtrToStructure(
stringArrayPointer, typeof(IntPtr));
builder.Append(Marshal.PtrToStringUni(stringPointer));
stringArrayPointer += IntPtr.Size;
}
results.Add(builder.ToString());
}
}
}
finally
{
if (queryResultsSet != IntPtr.Zero)
{
DnsRecordListFree(queryResultsSet,
(int)DNS_FREE_TYPE.DnsFreeRecordList);
}
}
return results;
}
[DllImport("Dnsapi.dll", EntryPoint = "DnsQuery_W",
ExactSpelling = true, CharSet = CharSet.Unicode,
SetLastError = true)]
static extern int DnsQuery(string lpstrName, short wType, int options,
IntPtr pExtra, ref IntPtr ppQueryResultsSet, IntPtr pReserved);
[DllImport("Dnsapi.dll")]
static extern void DnsRecordListFree(IntPtr pRecordList, int freeType);
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)]
struct DnsRecordTxt
{
public IntPtr pNext;
public string pName;
public short wType;
public short wDataLength;
public int flags;
public int dwTtl;
public int dwReserved;
public int dwStringCount;
public string pStringArray;
}
enum DNS_FREE_TYPE
{
DnsFreeFlat = 0,
DnsFreeRecordList = 1,
DnsFreeParsedMessageFields = 2
}
}
}
You basically need to do a DNS request asking for the MX/SPF record of the domain. There's a few examples of doing this in C# around. There's a library at http://mailsystem.codeplex.com/ that has a Validator class with GetMxRecords to do this that you might find useful
For what is worth - MailBee's .NET Objects support this as well. I only say this because we already owned this component and I was about to implement something else when I found this goodie already baked into what we had.
http://www.afterlogic.com/mailbee-net/docs/filter_spam_with_dns.html
We tried to use #martin-liversage's answer, but after some time running on hundrets of domains it failed on some memory problem. (Maybe there was some invalid/another type DNS record?)
So i studied this exact WINAPI functions and structures used in this case and edited the solution acordingly.
Links to WINAPI documentation are included in code.
So here's our improved code, that's working 100% even in our case:
public String GetSpfRecord(String domain)
{
// Definition of DNS params
const Int16 DNS_TYPE_TXT = 0x0010;
const Int32 DNS_QUERY_STANDARD = 0x00000001;
const Int32 DNS_ERROR_RCODE_NAME_ERROR = 9003;
const Int32 DNS_INFO_NO_RECORDS = 9501;
DnsRecordA dnsRecord;
var queryResultsSet = IntPtr.Zero;
try
{
var dnsStatus = DnsQuery(
domain,
DNS_TYPE_TXT,
DNS_QUERY_STANDARD,
IntPtr.Zero,
ref queryResultsSet,
IntPtr.Zero
);
if (dnsStatus == DNS_ERROR_RCODE_NAME_ERROR || dnsStatus == DNS_INFO_NO_RECORDS)
return null;
if (dnsStatus != 0)
throw new Win32Exception(dnsStatus);
for (IntPtr pointer = queryResultsSet; pointer != IntPtr.Zero; pointer = dnsRecord.pNext)
{
// Copies data from memory (size of DnsRecordA) from adress pointer to new alocated memory and creates instance of pointer to this place.
dnsRecord = (DnsRecordA)Marshal.PtrToStructure(pointer, typeof(DnsRecordA));
// pokud se jedná o typ TXT
if (dnsRecord.wType == DNS_TYPE_TXT)
{
// get pointer to informations in "Data" property (https://learn.microsoft.com/en-us/windows/win32/api/windns/ns-windns-dns_recorda)
var dataPointer = pointer + Marshal.SizeOf(typeof(DnsRecordA));
// Get the txtData
var txtData = (DNS_TXT_DATAA)Marshal.PtrToStructure(dataPointer, typeof(DNS_TXT_DATAA));
if (txtData.dwStringCount >= 1)
{
string line = Marshal.PtrToStringUni(txtData.pStringArray[0]);
// only if record starts with "v=spf" (Getting only SPF records)
// Getting only first (here is always maximum of 1 record) and returning whole line
if (line.StartsWith("v=spf") && string.IsNullOrEmpty(result))
{
return line;
}
}
}
}
// no SPF record - returning null
return null;
}
finally
{
const Int32 DnsFreeRecordList = 1;
// always release the memory alocated for list of dns records
if (queryResultsSet != IntPtr.Zero)
DnsRecordListFree(queryResultsSet, DnsFreeRecordList);
}
}
// https://learn.microsoft.com/en-us/windows/win32/api/windns/nf-windns-dnsquery_a
[DllImport("Dnsapi.dll", EntryPoint = "DnsQuery_W", ExactSpelling = true, CharSet = CharSet.Unicode, SetLastError = true)]
static extern Int32 DnsQuery(String lpstrName, Int16 wType, Int32 options, IntPtr pExtra, ref IntPtr ppQueryResultsSet, IntPtr pReserved);
// https://learn.microsoft.com/en-us/windows/win32/api/windns/nf-windns-dnsrecordlistfree
[DllImport("Dnsapi.dll")]
static extern void DnsRecordListFree(IntPtr pRecordList, Int32 freeType);
// https://learn.microsoft.com/en-us/windows/win32/api/windns/ns-windns-dns_recorda
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Unicode)]
struct DnsRecordA
{
public IntPtr pNext;
public String pName;
public Int16 wType;
public Int16 wDataLength;
public Int32 flags;
public Int32 dwTtl;
public Int32 dwReserved;
// Commented, because i'm getting this value dynamicaly (it can also be another structure type which might cause some problems)
//public DNS_TXT_DATA Data;
}
// https://learn.microsoft.com/en-us/windows/win32/api/windns/ns-windns-dns_txt_dataa
[StructLayout(LayoutKind.Sequential)]
struct DNS_TXT_DATAA
{
/// DWORD->unsigned int
public uint dwStringCount;
/// PSTR[1]
[MarshalAs(UnmanagedType.ByValArray, SizeConst = 1, ArraySubType = UnmanagedType.SysUInt)]
internal IntPtr[] pStringArray;
}
Based on DnsDig project I created a DLL which can be used on any .net (vb , c#, forms, web. etc..) project
https://devselz.com/software/devselz_dnsdig_dns-txt-etc-query-domain-register.zip
Download the DLL , unzip, and Add as reference to your project (if website place on root/bin folder):
DnsDig.dll
nunit.framework.dll
(126KB in total)
Then use this example as for an ASP.Ne website (vb.net code)
Imports DnsDig
Imports Heijden.DNS
Partial Class lib_u_l_Default
Inherits System.Web.UI.Page
Public Resolver As Resolver
Protected Sub Page_Load(sender As Object, e As EventArgs) Handles Me.Load
Resolver = New Resolver
Dim SW As New System.Diagnostics.Stopwatch
SW.Start()
Dim DNSResponse As Heijden.DNS.Response = Resolver.Query(Request.QueryString("d"), QType.SPF, QClass.ANY)
SW.Stop()
If DNSResponse.header.ANCOUNT > 0 Then
For Each answerRR As AnswerRR In DNSResponse.Answers
Response.Write("<br/>" & answerRR.ToString)
Next
End If
End Sub
End Class
RESULTS:
https://yourwebsiteusingabovedlls.com/anyplacewhereabovecode/?d=goodyes.com
will write
goodyes.com. 3535 IN TXT "google-site-verification=IMw-tL0VWgMJbtcRgt_bu5UaVwpbNb94dvcOSObooa4"
goodyes.com. 3535 IN TXT "v=spf1 include:_spf.buzondecorreo.com ~all"
One option is to use the package DnsClient.NET (Github-Repo).
This library is able to do high performant DNS lookups as well as lookups for SPF-entries.
Example code for SPF-lookup:
var domainName = "example.domain";
var lookup = new LookupClient();
var result = await lookup.QueryAsync(domainName, QueryType.TXT).ConfigureAwait(false);
var records = result.Answers.OfType<TxtRecord>().ToList();
Funny how all the websites has this wrong
SPF is not TXT
you can have a txt record with no SPF and SPF with no TXT, so a TXT lookup will not show the SPF
I am trying to select a tree item in a Coded UI Test, but I don't know the entire hierarchy.
Example:
mssql connection
Tables
Unknown
FirstName
Is there a way to search for this FirstName tree item and specify that it is so many levels deep, without specifying the entire path?
It doesn't look like any of the Search Configuration properties will do this.
If FirstName is unique in the tree, then you can use PInvoke, and you won't need to specify the depth:
public static List<IntPtr> GetChildWindows(IntPtr parent)
{
var result = new List<IntPtr>();
var listHandle = GCHandle.Alloc(result);
try
{
var childProc = new User32.EnumWindowsProc(EnumWindow);
User32.EnumChildWindows(parent, childProc, GCHandle.ToIntPtr(listHandle));
}
finally
{
if (listHandle.IsAllocated)
listHandle.Free();
}
return result;
}
private static bool EnumWindow(IntPtr handle, IntPtr pointer)
{
var gch = GCHandle.FromIntPtr(pointer);
var list = gch.Target as List<IntPtr>;
if (list == null)
{
throw new InvalidCastException("GCHandle Target could not be cast as List<IntPtr>");
}
list.Add(handle);
// Modify this to check to see if you want to cancel the operation, then return a null here
return true;
}
public delegate bool EnumWindowsProc(IntPtr hWnd, IntPtr lParam);
[DllImport("user32.dll")]
[return: MarshalAs(UnmanagedType.Bool)]
public static extern bool EnumChildWindows(IntPtr window, EnumWindowsProc callback, IntPtr i);
// sample usage:
public void findWindowUser32()
{
foreach (IntPtr child in GetChildWindows(User32.FindWindow(null, "Untitled - Notepad")))
{
StringBuilder sb = new StringBuilder(100);
User32.GetClassName(child, sb, sb.Capacity);
if (sb.ToString() == "Edit")
{
uint wparam = 0 << 29 | 0;
User32.PostMessage(child, WindowsConstants.WM_KEYDOWN, (IntPtr)Keys.H, (IntPtr)wparam);
}
}
}
When your control was mapped in the UI map, perhaps the full hierarchy was used, eg
mssql connection
-Tables
--Unknown1
---FirstName
resulted in 4 mapped controls.
You can edit the uimap .xml file manually carefully removing the -Unknown1 element, and making sure that MatchExactHierarchy is turned off.
That way the search will originally fail, move on to using heuristics to look for elements deeper in the tree than the immediate children and should find your control.
public static UITestControl GetTreeItem(UITestControl TreeControl, string ItemName, bool ContainsTrue = true)
{
AutomationElement tree = AutomationElement.FromHandle(TreeControl.WindowHandle);
System.Windows.Automation.ControlType controlType = tree.Current.ControlType;
//Get collection of tree nodes.
AutomationElementCollection treeNodeCollection = null;
treeNodeCollection = tree.FindAll(TreeScope.Descendants,
new System.Windows.Automation.PropertyCondition(AutomationElement.ControlTypeProperty,
System.Windows.Automation.ControlType.TreeItem));
UITestControl ReqTreeItem = new UITestControl();
foreach (AutomationElement item in treeNodeCollection)
{
if ((item.Current.Name == ItemName) && (!ContainsTrue))
{
ReqTreeItem = UITestControlFactory.FromNativeElement(item, "UIA");
break;
}
if ((item.Current.Name.Contains(ItemName)) && (ContainsTrue))
{
ReqTreeItem = UITestControlFactory.FromNativeElement(item, "UIA");
break;
}
}
return ReqTreeItem;
}
Whilst working with the MSI Interop API I have come across some unusual behaviour which is causing my application to crash. It is simple enough to 'handle' the problem but I would like to know more about 'why' this is happening.
My first call to MSIEnumRelatedProducts returns an value of 0 and correctly sets my string buffer to a productcode. My understanding is that this would only happen if the given upgradecode (passed as a parm to the method) has a 'related family product' currently installed, otherwise it would return 259 ERROR_NO_MORE_ITEMS.
However when I subsequently call MSIGetProductInfo using the same productcode I get the return value 1605, "This action is only valid for products that are currently installed.".
Does anyone have any ideas under what circumstances this might happen? It is 100% repeatable on 1 machine but I have not yet managed to get reproduction steps on another machine.
All our products are build with the Wix Property "AllUsers=1" so products should be installed for all users, not just one.
Any ideas/suggestions appreciated.
Thanks
Ben
Update:
I've noticed that when running the problem msi package with logging the following line is shown:
MSI (s) (88:68) [12:15:50:235]: FindRelatedProducts: could not read ASSIGNMENTTYPE info for product '{840C...etc.....96}'. Skipping...
Does anyone have any idea what this might mean?
Update: Code sample.
do
{
result = _MSIApi.EnumRelatedProducts(upgradeCode.ToString("B"), 0,
productIndex, productCode);
if (result == MSIApi.ERROR_BAD_CONFIGURATION ||
result == MSIApi.ERROR_INVALID_PARAMETER ||
result == MSIApi.ERROR_NOT_ENOUGH_MEMORY)
{
throw new MSIInteropException("Failed to check for related products",
new Win32Exception((Int32)result));
}
if(!String.IsNullOrEmpty(productCode.ToString()))
{
Int32 size = 255;
StringBuilder buffer = new StringBuilder(size);
Int32 result = (Int32)_MSIApi.GetProductInfo(productCode,
MSIApi.INSTALLPROPERTY_VERSIONSTRING,
buffer,
ref size);
if (result != MSIApi.ERROR_SUCCESS)
{
throw new MSIInteropException("Failed to get installed version",
new Win32Exception(result));
}
version = new Version(buffer.ToString());
}
productCode = new StringBuilder(39);
productIndex++;
}
while (result == MSIApi.ERROR_SUCCESS);
I suppose that you try to use MsiGetProductInfo to get a property other as described in documentation. For example you can get in the way the value of the "PackageCode" property (INSTALLPROPERTY_PACKAGECODE) without any problem, but you can't get the value of the "UpgradeCode" property with respect of MsiGetProductInfo and receive the error 1605 (ERROR_UNKNOWN_PRODUCT).
UPDATED: OK, now I understand you problem. How you can find in the internet there are a bug in MsiGetProductInfo, so it work not always. Sometime it get back 1605 (ERROR_UNKNOWN_PRODUCT) or 1608 (ERROR_UNKNOWN_PROPERTY) back. In the case as the only workaround is to get the version property manually. I could reproduce the problem which you described on my computer with the Microsoft Office Outlook 2010 MUI (UpgradeCode = "{00140000-001A-0000-0000-0000000FF1CE}") and wrote a workaround where I get the product version from the registry. In the example I get information only from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products. If you have an interest to products installed not only for all users you have to modify the program. Here is the code
using System;
using System.Text;
using System.Runtime.InteropServices;
using Microsoft.Win32;
namespace EnumInstalledMsiProducts {
internal static class NativeMethods {
internal const int MaxGuidChars = 38;
internal const int NoError = 0;
internal const int ErrorNoMoreItems = 259;
internal const int ErrorUnknownProduct = 1605;
internal const int ErrorUnknownProperty = 1608;
internal const int ErrorMoreData = 234;
[DllImport ("msi.dll", CharSet = CharSet.Unicode, SetLastError = true)]
internal static extern int MsiEnumRelatedProducts (string lpUpgradeCode, int dwReserved,
int iProductIndex, //The zero-based index into the registered products.
StringBuilder lpProductBuf); // A buffer to receive the product code GUID.
// This buffer must be 39 characters long.
// The first 38 characters are for the GUID, and the last character is for
// the terminating null character.
[DllImport ("msi.dll", CharSet = CharSet.Unicode, SetLastError = true)]
internal static extern Int32 MsiGetProductInfo (string product, string property,
StringBuilder valueBuf, ref Int32 cchValueBuf);
}
class Program {
static int GetProperty(string productCode, string propertyName, StringBuilder sbBuffer) {
int len = sbBuffer.Capacity;
sbBuffer.Length = 0;
int status = NativeMethods.MsiGetProductInfo (productCode,
propertyName,
sbBuffer, ref len);
if (status == NativeMethods.ErrorMoreData) {
len++;
sbBuffer.EnsureCapacity (len);
status = NativeMethods.MsiGetProductInfo (productCode, propertyName, sbBuffer, ref len);
}
if ((status == NativeMethods.ErrorUnknownProduct ||
status == NativeMethods.ErrorUnknownProperty)
&& (String.Compare (propertyName, "ProductVersion", StringComparison.Ordinal) == 0 ||
String.Compare (propertyName, "ProductName", StringComparison.Ordinal) == 0)) {
// try to get vesrion manually
StringBuilder sbKeyName = new StringBuilder ();
sbKeyName.Append ("SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Installer\\UserData\\S-1-5-18\\Products\\");
Guid guid = new Guid (productCode);
byte[] buidAsBytes = guid.ToByteArray ();
foreach (byte b in buidAsBytes) {
int by = ((b & 0xf) << 4) + ((b & 0xf0) >> 4); // swap hex digits in the byte
sbKeyName.AppendFormat ("{0:X2}", by);
}
sbKeyName.Append ("\\InstallProperties");
RegistryKey key = Registry.LocalMachine.OpenSubKey (sbKeyName.ToString ());
if (key != null) {
string valueName = "DisplayName";
if (String.Compare (propertyName, "ProductVersion", StringComparison.Ordinal) == 0)
valueName = "DisplayVersion";
string val = key.GetValue (valueName) as string;
if (!String.IsNullOrEmpty (val)) {
sbBuffer.Length = 0;
sbBuffer.Append (val);
status = NativeMethods.NoError;
}
}
}
return status;
}
static void Main () {
string upgradeCode = "{00140000-001A-0000-0000-0000000FF1CE}";
StringBuilder sbProductCode = new StringBuilder (39);
StringBuilder sbProductName = new StringBuilder ();
StringBuilder sbProductVersion = new StringBuilder (1024);
for (int iProductIndex = 0; ; iProductIndex++) {
int iRes = NativeMethods.MsiEnumRelatedProducts (upgradeCode, 0, iProductIndex, sbProductCode);
if (iRes != NativeMethods.NoError) {
// NativeMethods.ErrorNoMoreItems=259
break;
}
string productCode = sbProductCode.ToString();
int status = GetProperty (productCode, "ProductVersion", sbProductVersion);
if (status != NativeMethods.NoError) {
Console.WriteLine ("Can't get 'ProductVersion' for {0}", productCode);
}
status = GetProperty (productCode, "ProductName", sbProductName);
if (status != NativeMethods.NoError) {
Console.WriteLine ("Can't get 'ProductName' for {0}", productCode);
}
Console.WriteLine ("ProductCode: {0}{3}ProductName:'{1}'{3}ProductVersion:'{2}'{3}",
productCode, sbProductName, sbProductVersion, Environment.NewLine);
}
}
}
}
which produce on my computer the correct output
ProductCode: {90140000-001A-0407-0000-0000000FF1CE}
ProductName:'Microsoft Office Outlook MUI (German) 2010'
ProductVersion:'14.0.4763.1000'
ProductCode: {90140000-001A-0419-0000-0000000FF1CE}
ProductName:'Microsoft Office Outlook MUI (Russian) 2010'
ProductVersion:'14.0.4763.1000'
instead of errors in the ProductVersion before.
You should look at Windows Installer XML's Deployment Tools Foundation. It has a very mature MSI Interop ( Microsoft.Deployment.WindowsInstaller ) which will make writing and testing this code a lot easier.
I see you already have WiX ( hopefully v3+ ) so look for it in the C:\Program Files\Windows Installer XML v3\SDK folder.
I try to get the selected files of a folder which the user is using. I have the following code which is already running, but only on desktop files:
private string selectedFiles()
{
// get the handle of the desktop listview
IntPtr vHandle = WinApiWrapper.FindWindow("Progman", "Program Manager");
vHandle = WinApiWrapper.FindWindowEx(vHandle, IntPtr.Zero, "SHELLDLL_DefView", null);
vHandle = WinApiWrapper.FindWindowEx(vHandle, IntPtr.Zero, "SysListView32", "FolderView");
//IntPtr vHandle = WinApiWrapper.GetForegroundWindow();
//Get total count of the icons on the desktop
int vItemCount = WinApiWrapper.SendMessage(vHandle, WinApiWrapper.LVM_GETITEMCOUNT, 0, 0);
//MessageBox.Show(vItemCount.ToString());
uint vProcessId;
WinApiWrapper.GetWindowThreadProcessId(vHandle, out vProcessId);
IntPtr vProcess = WinApiWrapper.OpenProcess(WinApiWrapper.PROCESS_VM_OPERATION | WinApiWrapper.PROCESS_VM_READ |
WinApiWrapper.PROCESS_VM_WRITE, false, vProcessId);
IntPtr vPointer = WinApiWrapper.VirtualAllocEx(vProcess, IntPtr.Zero, 4096,
WinApiWrapper.MEM_RESERVE | WinApiWrapper.MEM_COMMIT, WinApiWrapper.PAGE_READWRITE);
try
{
for (int j = 0; j < vItemCount; j++)
{
byte[] vBuffer = new byte[256];
WinApiWrapper.LVITEM[] vItem = new WinApiWrapper.LVITEM[1];
vItem[0].mask = WinApiWrapper.LVIF_TEXT;
vItem[0].iItem = j;
vItem[0].iSubItem = 0;
vItem[0].cchTextMax = vBuffer.Length;
vItem[0].pszText = (IntPtr)((int)vPointer + Marshal.SizeOf(typeof(WinApiWrapper.LVITEM)));
uint vNumberOfBytesRead = 0;
WinApiWrapper.WriteProcessMemory(vProcess, vPointer,
Marshal.UnsafeAddrOfPinnedArrayElement(vItem, 0),
Marshal.SizeOf(typeof(WinApiWrapper.LVITEM)), ref vNumberOfBytesRead);
WinApiWrapper.SendMessage(vHandle, WinApiWrapper.LVM_GETITEMW, j, vPointer.ToInt32());
WinApiWrapper.ReadProcessMemory(vProcess,
(IntPtr)((int)vPointer + Marshal.SizeOf(typeof(WinApiWrapper.LVITEM))),
Marshal.UnsafeAddrOfPinnedArrayElement(vBuffer, 0),
vBuffer.Length, ref vNumberOfBytesRead);
string vText = Encoding.Unicode.GetString(vBuffer, 0,
(int)vNumberOfBytesRead);
string IconName = vText;
//Check if item is selected
var result = WinApiWrapper.SendMessage(vHandle, WinApiWrapper.LVM_GETITEMSTATE, j, (int)WinApiWrapper.LVIS_SELECTED);
if (result == WinApiWrapper.LVIS_SELECTED)
{
return vText;
}
}
}
finally
{
WinApiWrapper.VirtualFreeEx(vProcess, vPointer, 0, WinApiWrapper.MEM_RELEASE);
WinApiWrapper.CloseHandle(vProcess);
}
return String.Empty;
}
I tried to get the window handle with GetForegroundWindow() and then call the SHELLDLL_DefView without success.
So how can I change the first 3 rows to get me the handle of the current folder in use?
That's a lot of hacking to do something that is explicitly supported by the various shell objects and interfaces. Granted the documentation doesn't make it easily discoverable, but the functionality is there. Raymond Chen wrote a great article about using these interfaces. There doesn't appear to be a way to get the "current" folder, though I guess you could get the HWNDs and see if any is the foreground window.
thank you very much. You gave me the right direction. It is possible to get the selected files of a folder:
/// <summary>
/// Get the selected file of the active window
/// </summary>
/// <param name="handle">Handle of active window</param>
/// <returns></returns>
public String getSelectedFileOfActiveWindow(Int32 handle)
{
try
{
// Required ref: SHDocVw (Microsoft Internet Controls COM Object)
ShellWindows shellWindows = new SHDocVw.ShellWindows();
foreach (InternetExplorer window in shellWindows)
{
if (window.HWND == handle)
return ((Shell32.IShellFolderViewDual2)window.Document).FocusedItem.Path;
}
}
catch (Exception)
{
return null;
}
return null;
}
I am writing a small C# app to disable a device (my laptop touchpad) whenever another mouse device is detected, and enable the touchpad again if a mouse is not detected. I am not even able to disable the touchpad in device manager (it is running on the default mouse class driver).
I am getting into device driver development so I thought maybe I could write a little filter driver that would just accept IOCTLs to enable and disable passing mouse event messages up the device stack, and get messages from user mode via a raw PDO. However, I asked that question and somebody has suggested that I can do this in usermode via the SetupDi.. functions. That would be really good, because this raw PDO communication method is a PITA to work with.
I have only used SetupDiGetClassDevs before, and there are so many of them, can someone with more experience with this part of the Win32 API just tell me quickly what one I should call to stop/disable a mouse device or its interface or if there is something somewhere in the dark corners of the framework that will do this (maybe in WMI?).
Update (24/9/09) I figured out how to do this with a filter driver and posted how I did it on my original question. I still want to know if it is possible to enable or disable devices directly from Win32 and if so, how - so I will leave this question open.
You can enable/disable devices from Win32 (and hence from C# via P/Invoke) using the SetupDi APIs but not all devices are "disable-able" in this way.
The problem you'll run into trying to disable your touchpad from Win32 (or WMI or any other API which calls down into the SetupDi* family of functions) is that the default mouse driver which is in most laptops with a touchpad ("PS/2 compatible mouse") doesn't support being disabled using SetupDi API's. I suspect this may be because actual old mice using PS/2 connectors can't be hot-detached without hosing the hardware.
To verify that you can't disable, go into Device Manager and right-click on your mouse driver. If you see a disable option, you can use SetupDi to disable it. If no disable option, you're out of luck... welcome to IOCTL-land!
If you do see a disable option, then the code below (ported to C# from a VB sample I found here) should let you disable and re-enable the device.
Here's the code to call the library:
public static void EnableMouse(bool enable)
{
// every type of device has a hard-coded GUID, this is the one for mice
Guid mouseGuid = new Guid("{4d36e96f-e325-11ce-bfc1-08002be10318}");
// get this from the properties dialog box of this device in Device Manager
string instancePath = #"ACPI\PNP0F03\4&3688D3F&0";
DeviceHelper.SetDeviceEnabled(mouseGuid, instancePath, enable);
}
Here's the library itself, adapted from here.
using System;
using System.Text;
using System.Collections.Generic;
using DisableDevice;
using System.Runtime.InteropServices;
using System.ComponentModel;
using Microsoft.Win32.SafeHandles;
using System.Security;
using System.Runtime.ConstrainedExecution;
using System.Management;
namespace DisableDevice
{
[Flags()]
internal enum SetupDiGetClassDevsFlags
{
Default = 1,
Present = 2,
AllClasses = 4,
Profile = 8,
DeviceInterface = (int)0x10
}
internal enum DiFunction
{
SelectDevice = 1,
InstallDevice = 2,
AssignResources = 3,
Properties = 4,
Remove = 5,
FirstTimeSetup = 6,
FoundDevice = 7,
SelectClassDrivers = 8,
ValidateClassDrivers = 9,
InstallClassDrivers = (int)0xa,
CalcDiskSpace = (int)0xb,
DestroyPrivateData = (int)0xc,
ValidateDriver = (int)0xd,
Detect = (int)0xf,
InstallWizard = (int)0x10,
DestroyWizardData = (int)0x11,
PropertyChange = (int)0x12,
EnableClass = (int)0x13,
DetectVerify = (int)0x14,
InstallDeviceFiles = (int)0x15,
UnRemove = (int)0x16,
SelectBestCompatDrv = (int)0x17,
AllowInstall = (int)0x18,
RegisterDevice = (int)0x19,
NewDeviceWizardPreSelect = (int)0x1a,
NewDeviceWizardSelect = (int)0x1b,
NewDeviceWizardPreAnalyze = (int)0x1c,
NewDeviceWizardPostAnalyze = (int)0x1d,
NewDeviceWizardFinishInstall = (int)0x1e,
Unused1 = (int)0x1f,
InstallInterfaces = (int)0x20,
DetectCancel = (int)0x21,
RegisterCoInstallers = (int)0x22,
AddPropertyPageAdvanced = (int)0x23,
AddPropertyPageBasic = (int)0x24,
Reserved1 = (int)0x25,
Troubleshooter = (int)0x26,
PowerMessageWake = (int)0x27,
AddRemotePropertyPageAdvanced = (int)0x28,
UpdateDriverUI = (int)0x29,
Reserved2 = (int)0x30
}
internal enum StateChangeAction
{
Enable = 1,
Disable = 2,
PropChange = 3,
Start = 4,
Stop = 5
}
[Flags()]
internal enum Scopes
{
Global = 1,
ConfigSpecific = 2,
ConfigGeneral = 4
}
internal enum SetupApiError
{
NoAssociatedClass = unchecked((int)0xe0000200),
ClassMismatch = unchecked((int)0xe0000201),
DuplicateFound = unchecked((int)0xe0000202),
NoDriverSelected = unchecked((int)0xe0000203),
KeyDoesNotExist = unchecked((int)0xe0000204),
InvalidDevinstName = unchecked((int)0xe0000205),
InvalidClass = unchecked((int)0xe0000206),
DevinstAlreadyExists = unchecked((int)0xe0000207),
DevinfoNotRegistered = unchecked((int)0xe0000208),
InvalidRegProperty = unchecked((int)0xe0000209),
NoInf = unchecked((int)0xe000020a),
NoSuchHDevinst = unchecked((int)0xe000020b),
CantLoadClassIcon = unchecked((int)0xe000020c),
InvalidClassInstaller = unchecked((int)0xe000020d),
DiDoDefault = unchecked((int)0xe000020e),
DiNoFileCopy = unchecked((int)0xe000020f),
InvalidHwProfile = unchecked((int)0xe0000210),
NoDeviceSelected = unchecked((int)0xe0000211),
DevinfolistLocked = unchecked((int)0xe0000212),
DevinfodataLocked = unchecked((int)0xe0000213),
DiBadPath = unchecked((int)0xe0000214),
NoClassInstallParams = unchecked((int)0xe0000215),
FileQueueLocked = unchecked((int)0xe0000216),
BadServiceInstallSect = unchecked((int)0xe0000217),
NoClassDriverList = unchecked((int)0xe0000218),
NoAssociatedService = unchecked((int)0xe0000219),
NoDefaultDeviceInterface = unchecked((int)0xe000021a),
DeviceInterfaceActive = unchecked((int)0xe000021b),
DeviceInterfaceRemoved = unchecked((int)0xe000021c),
BadInterfaceInstallSect = unchecked((int)0xe000021d),
NoSuchInterfaceClass = unchecked((int)0xe000021e),
InvalidReferenceString = unchecked((int)0xe000021f),
InvalidMachineName = unchecked((int)0xe0000220),
RemoteCommFailure = unchecked((int)0xe0000221),
MachineUnavailable = unchecked((int)0xe0000222),
NoConfigMgrServices = unchecked((int)0xe0000223),
InvalidPropPageProvider = unchecked((int)0xe0000224),
NoSuchDeviceInterface = unchecked((int)0xe0000225),
DiPostProcessingRequired = unchecked((int)0xe0000226),
InvalidCOInstaller = unchecked((int)0xe0000227),
NoCompatDrivers = unchecked((int)0xe0000228),
NoDeviceIcon = unchecked((int)0xe0000229),
InvalidInfLogConfig = unchecked((int)0xe000022a),
DiDontInstall = unchecked((int)0xe000022b),
InvalidFilterDriver = unchecked((int)0xe000022c),
NonWindowsNTDriver = unchecked((int)0xe000022d),
NonWindowsDriver = unchecked((int)0xe000022e),
NoCatalogForOemInf = unchecked((int)0xe000022f),
DevInstallQueueNonNative = unchecked((int)0xe0000230),
NotDisableable = unchecked((int)0xe0000231),
CantRemoveDevinst = unchecked((int)0xe0000232),
InvalidTarget = unchecked((int)0xe0000233),
DriverNonNative = unchecked((int)0xe0000234),
InWow64 = unchecked((int)0xe0000235),
SetSystemRestorePoint = unchecked((int)0xe0000236),
IncorrectlyCopiedInf = unchecked((int)0xe0000237),
SceDisabled = unchecked((int)0xe0000238),
UnknownException = unchecked((int)0xe0000239),
PnpRegistryError = unchecked((int)0xe000023a),
RemoteRequestUnsupported = unchecked((int)0xe000023b),
NotAnInstalledOemInf = unchecked((int)0xe000023c),
InfInUseByDevices = unchecked((int)0xe000023d),
DiFunctionObsolete = unchecked((int)0xe000023e),
NoAuthenticodeCatalog = unchecked((int)0xe000023f),
AuthenticodeDisallowed = unchecked((int)0xe0000240),
AuthenticodeTrustedPublisher = unchecked((int)0xe0000241),
AuthenticodeTrustNotEstablished = unchecked((int)0xe0000242),
AuthenticodePublisherNotTrusted = unchecked((int)0xe0000243),
SignatureOSAttributeMismatch = unchecked((int)0xe0000244),
OnlyValidateViaAuthenticode = unchecked((int)0xe0000245)
}
[StructLayout(LayoutKind.Sequential)]
internal struct DeviceInfoData
{
public int Size;
public Guid ClassGuid;
public int DevInst;
public IntPtr Reserved;
}
[StructLayout(LayoutKind.Sequential)]
internal struct PropertyChangeParameters
{
public int Size;
// part of header. It's flattened out into 1 structure.
public DiFunction DiFunction;
public StateChangeAction StateChange;
public Scopes Scope;
public int HwProfile;
}
internal class NativeMethods
{
private const string setupapi = "setupapi.dll";
private NativeMethods()
{
}
[DllImport(setupapi, CallingConvention = CallingConvention.Winapi, SetLastError = true)]
[return: MarshalAs(UnmanagedType.Bool)]
public static extern bool SetupDiCallClassInstaller(DiFunction installFunction, SafeDeviceInfoSetHandle deviceInfoSet, [In()]
ref DeviceInfoData deviceInfoData);
[DllImport(setupapi, CallingConvention = CallingConvention.Winapi, SetLastError = true)]
[return: MarshalAs(UnmanagedType.Bool)]
public static extern bool SetupDiEnumDeviceInfo(SafeDeviceInfoSetHandle deviceInfoSet, int memberIndex, ref DeviceInfoData deviceInfoData);
[DllImport(setupapi, CallingConvention = CallingConvention.Winapi, CharSet = CharSet.Unicode, SetLastError = true)]
public static extern SafeDeviceInfoSetHandle SetupDiGetClassDevs([In()]
ref Guid classGuid, [MarshalAs(UnmanagedType.LPWStr)]
string enumerator, IntPtr hwndParent, SetupDiGetClassDevsFlags flags);
/*
[DllImport(setupapi, CallingConvention = CallingConvention.Winapi, CharSet = CharSet.Unicode, SetLastError = true)]
[return: MarshalAs(UnmanagedType.Bool)]
public static extern bool SetupDiGetDeviceInstanceId(SafeDeviceInfoSetHandle deviceInfoSet, [In()]
ref DeviceInfoData did, [MarshalAs(UnmanagedType.LPTStr)]
StringBuilder deviceInstanceId, int deviceInstanceIdSize, [Out()]
ref int requiredSize);
*/
[DllImport("setupapi.dll", SetLastError = true, CharSet = CharSet.Auto)]
[return: MarshalAs(UnmanagedType.Bool)]
public static extern bool SetupDiGetDeviceInstanceId(
IntPtr DeviceInfoSet,
ref DeviceInfoData did,
[MarshalAs(UnmanagedType.LPTStr)] StringBuilder DeviceInstanceId,
int DeviceInstanceIdSize,
out int RequiredSize
);
[SuppressUnmanagedCodeSecurity()]
[ReliabilityContract(Consistency.WillNotCorruptState, Cer.Success)]
[DllImport(setupapi, CallingConvention = CallingConvention.Winapi, SetLastError = true)]
[return: MarshalAs(UnmanagedType.Bool)]
public static extern bool SetupDiDestroyDeviceInfoList(IntPtr deviceInfoSet);
[DllImport(setupapi, CallingConvention = CallingConvention.Winapi, SetLastError = true)]
[return: MarshalAs(UnmanagedType.Bool)]
public static extern bool SetupDiSetClassInstallParams(SafeDeviceInfoSetHandle deviceInfoSet, [In()]
ref DeviceInfoData deviceInfoData, [In()]
ref PropertyChangeParameters classInstallParams, int classInstallParamsSize);
}
internal class SafeDeviceInfoSetHandle : SafeHandleZeroOrMinusOneIsInvalid
{
public SafeDeviceInfoSetHandle()
: base(true)
{
}
protected override bool ReleaseHandle()
{
return NativeMethods.SetupDiDestroyDeviceInfoList(this.handle);
}
}
public sealed class DeviceHelper
{
private DeviceHelper()
{
}
/// <summary>
/// Enable or disable a device.
/// </summary>
/// <param name="classGuid">The class guid of the device. Available in the device manager.</param>
/// <param name="instanceId">The device instance id of the device. Available in the device manager.</param>
/// <param name="enable">True to enable, False to disable.</param>
/// <remarks>Will throw an exception if the device is not Disableable.</remarks>
public static void SetDeviceEnabled(Guid classGuid, string instanceId, bool enable)
{
SafeDeviceInfoSetHandle diSetHandle = null;
try
{
// Get the handle to a device information set for all devices matching classGuid that are present on the
// system.
diSetHandle = NativeMethods.SetupDiGetClassDevs(ref classGuid, null, IntPtr.Zero, SetupDiGetClassDevsFlags.Present);
// Get the device information data for each matching device.
DeviceInfoData[] diData = GetDeviceInfoData(diSetHandle);
// Find the index of our instance. i.e. the touchpad mouse - I have 3 mice attached...
int index = GetIndexOfInstance(diSetHandle, diData, instanceId);
// Disable...
EnableDevice(diSetHandle, diData[index], enable);
}
finally
{
if (diSetHandle != null)
{
if (diSetHandle.IsClosed == false)
{
diSetHandle.Close();
}
diSetHandle.Dispose();
}
}
}
private static DeviceInfoData[] GetDeviceInfoData(SafeDeviceInfoSetHandle handle)
{
List<DeviceInfoData> data = new List<DeviceInfoData>();
DeviceInfoData did = new DeviceInfoData();
int didSize = Marshal.SizeOf(did);
did.Size = didSize;
int index = 0;
while (NativeMethods.SetupDiEnumDeviceInfo(handle, index, ref did))
{
data.Add(did);
index += 1;
did = new DeviceInfoData();
did.Size = didSize;
}
return data.ToArray();
}
// Find the index of the particular DeviceInfoData for the instanceId.
private static int GetIndexOfInstance(SafeDeviceInfoSetHandle handle, DeviceInfoData[] diData, string instanceId)
{
const int ERROR_INSUFFICIENT_BUFFER = 122;
for (int index = 0; index <= diData.Length - 1; index++)
{
StringBuilder sb = new StringBuilder(1);
int requiredSize = 0;
bool result = NativeMethods.SetupDiGetDeviceInstanceId(handle.DangerousGetHandle(), ref diData[index], sb, sb.Capacity, out requiredSize);
if (result == false && Marshal.GetLastWin32Error() == ERROR_INSUFFICIENT_BUFFER)
{
sb.Capacity = requiredSize;
result = NativeMethods.SetupDiGetDeviceInstanceId(handle.DangerousGetHandle(), ref diData[index], sb, sb.Capacity, out requiredSize);
}
if (result == false)
throw new Win32Exception();
if (instanceId.Equals(sb.ToString()))
{
return index;
}
}
// not found
return -1;
}
// enable/disable...
private static void EnableDevice(SafeDeviceInfoSetHandle handle, DeviceInfoData diData, bool enable)
{
PropertyChangeParameters #params = new PropertyChangeParameters();
// The size is just the size of the header, but we've flattened the structure.
// The header comprises the first two fields, both integer.
#params.Size = 8;
#params.DiFunction = DiFunction.PropertyChange;
#params.Scope = Scopes.Global;
if (enable)
{
#params.StateChange = StateChangeAction.Enable;
}
else
{
#params.StateChange = StateChangeAction.Disable;
}
bool result = NativeMethods.SetupDiSetClassInstallParams(handle, ref diData, ref #params, Marshal.SizeOf(#params));
if (result == false) throw new Win32Exception();
result = NativeMethods.SetupDiCallClassInstaller(DiFunction.PropertyChange, handle, ref diData);
if (result == false)
{
int err = Marshal.GetLastWin32Error();
if (err == (int)SetupApiError.NotDisableable)
throw new ArgumentException("Device can't be disabled (programmatically or in Device Manager).");
else if (err >= (int)SetupApiError.NoAssociatedClass && err <= (int)SetupApiError.OnlyValidateViaAuthenticode)
throw new Win32Exception("SetupAPI error: " + ((SetupApiError)err).ToString());
else
throw new Win32Exception();
}
}
}
}
Note that when you get an Index-Out-Of-Bounds exception on the line int index = GetIndexOfInstance(diSetHandle, diData, instanceId);, you might have used the wrong classGuid for the device or the wrong instanceId.
Also note that when you run this code on a 64-bit Windows platform, you should target the 64-bit platform when you build your application. Otherwise - i.e. when running your application as a 32-bit process on a 64-bit Windows platform - you will get an SetupAPI error InWow64 (ERROR_IN_WOW64).
When targetting a 64-bit Windows platform, you might also have to make changes to other parts of your application, e.g. when doing pointer arithmetic, in order to prevent overflows.
One way might be to use the Windows Management Instrumentation layer. There seems to be a few device related classes defined in this layer.
You can consider the below mentioned Win APIs
CM_Request_Device_EjectW function: The CM_Request_Device_Eject function prepares a local device instance for safe removal. If the device is removable.
CM_Query_And_Remove_SubTreeW function: The CM_Query_And_Remove_SubTree function checks whether a device instance and its children can be removed and if so, it removes them.
And the same can be found here: CM_Request_Device_EjectW and CM_Query_And_Remove_SubTreeW
In case you wanted to toggle the device enabled status, you can adapt #JustinGrant's amazing solution by replacing SetDeviceEnabled with the following:
public static void ToggleDeviceEnabled(Guid classGuid, string instanceId)
{
SafeDeviceInfoSetHandle diSetHandle = null;
try
{
(diSetHandle, var did) = GetDeviceInfo(classGuid, instanceId);
// according to https://stackoverflow.com/a/13105326/308451
// the answer might lie in CM_Get_DevNode_Status. Let's try.
int result = NativeMethods.CM_Get_DevNode_Status(out uint devNodeStatus, out uint probNum, did.DevInst);
// return value meanings are in Cfgmgr32.h., but CR_SUCCESS is one of them
const int CR_SUCCESS = 0;
if (result != CR_SUCCESS)
throw new Win32Exception();
// devNodeStatus now contains status bit flags: any combination of the DN_- prefixed bit flags defined in Cfg.h.
// one of the flags is
const uint DN_STARTED = 0x00000008; // Is currently configured
bool currentlyEnabled = HasFlag(devNodeStatus, DN_STARTED);
bool enable = !currentlyEnabled;
// toggle
EnableDevice(diSetHandle, did, enable);
}
finally
{
if (diSetHandle != null)
{
if (diSetHandle.IsClosed == false)
{
diSetHandle.Close();
}
diSetHandle.Dispose();
}
}
}
static bool HasFlag(uint flags, uint flag)
{
return (flags & flag) == flag;
}
private static (SafeDeviceInfoSetHandle, DeviceInfoData) GetDeviceInfo(Guid classGuid, string instanceId)
{
// Get the handle to a device information set for all devices matching classGuid that are present on the system.
var diSetHandle = NativeMethods.SetupDiGetClassDevs(ref classGuid, null, IntPtr.Zero, SetupDiGetClassDevsFlags.Present);
// Get the device information data for each matching device.
DeviceInfoData[] diData = GetDeviceInfoData(diSetHandle);
// Find the index of our instance. i.e. the touchpad mouse - I have 3 mice attached...
int index = GetIndexOfInstance(diSetHandle, diData, instanceId);
return (diSetHandle, diData[index]);
}
[DllImport("cfgmgr32.dll", SetLastError = true)]
public static extern int CM_Get_DevNode_Status(out uint status, out uint probNum, int devInst, int flags = 0);