I have a Windows Forms form where I am trying to show a user control when the form loads. Unfortunately, it is not showing anything. What am I doing wrong? Please see the code below:
AdministrationView wel = new AdministrationView();
public ProgramViwer()
{
InitializeComponent();
}
private void ProgramViwer_Load(object sender, System.EventArgs e)
{
formPanel.Controls.Clear();
formPanel.Controls.Add(wel);
}
Please note I added the load event based on what I read in this article:
http://msdn.microsoft.com/en-us/library/system.windows.forms.form.load.aspx
Three ways you can do this - from the form designer, select the form, and where you normally see the list of properties, just above it there should be a little lightning symbol - this shows you all the events of the form. Find the form load event in the list, and you should be able to pick ProgramViwer_Load from the dropdown.
A second way to do it is programmatically - somewhere (constructor maybe) you'd need to add it, something like: ProgramViwer.Load += new EventHandler(ProgramViwer_Load);
A third way using the designer (probably the quickest) - when you create a new form, double click on the middle of it on it in design mode. It'll create a Form load event for you, hook it in, and take you to the event handler code. Then you can just add your two lines and you're good to go!
You got half of the answer! Now that you created the event handler, you need to hook it to the form so that it actually gets called when the form is loading. You can achieve that by doing the following:
public class ProgramViwer : Form{
public ProgramViwer()
{
InitializeComponent();
Load += new EventHandler(ProgramViwer_Load);
}
private void ProgramViwer_Load(object sender, System.EventArgs e)
{
formPanel.Controls.Clear();
formPanel.Controls.Add(wel);
}
}
Related
_Changed events check it if it is changed. How can I check it from the beginning.
private void dateTimePicker1_ValueChanged(object sender, EventArgs e)
{
if (dateTimePicker1.Value.Month == 2)
{
pictureBox1.Visible = true;
}
else
{
pictureBox1.Visible = false;
}
}
You can call the event handler from the constructor, or sometimes better, the Load of the form:
private void MyForm_Load(object sender, EventArgs e)
{
dateTimePicker1_ValueChanged(dateTimePicker1, EventArgs.Empty);
}
There is also the Shown event called after the window first appears on the desktop.
Thus the control will be initialized as expected.
Here is the chain of calls:
Constructor : prefered place to instantiate objects and initialize UI instances.
Load : prefered place to create and initialize non designer UI objects or complete them like populating combobox or dataset.
Activated : prefered place to do things each time the form is activated and get focus.
Shown : prefered place to do things after the form is showned like open another form or show a info box.
The difference between using constructor, load or shown is mainly to have a clean code design and a smooth UI behavior.
There is no real difference between putting code in the constructor or in the load, else the reference and window handle are created.
Order of Events in Windows Forms (MS Doc)
It's my first time using winforms. I'm having some issues.
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void TextBox1_TextChanged(object sender, EventArgs e)
{
}
private void Form1_Load(object sender, EventArgs e)
{
textBox1.Text = "FORM1";
textBox1.AppendText("SOME TEXT");
}
}
I've tried this. My textbox is set to fill so it fills up the whole form. I set the multi-line propery to true and dock property to fill.
From what I can try as a first time WinForms user, the Form1_Load should run as soon as the form is created. I've tried some various ways to print text, nothing works. I noticed visual studios says "0 references" next to my function. I'm not sure what this means, maybe part of my issue? Please help.
Having 0 references to method means that it's never used in code. So your issue is that you defined method, which looks like should be executed on form load event, but it's just the definition. I suggest that you copy body of your method to clipboard, go to design page of your form, on the right side, you can browse events, that form generates, find Load event, double-click it, Visual Studio should generate code with empty method definition, paste there your code.
When you right-click your method name and click Find all references you should get something like this at the bottom:
Have you checked following things are done in properties:
Go to Form1->Properties window and check for events.
Now check for Load event and it should be attached to your Form1_Load method.
I have an app that uses a side menu, and for each button (there are 3) on the left side menu, it changes the pages shown.
I tried doing it with multiple panels, but it's a nightmare to maintain in designer, and it's probably not a very good programming habit, I expect.
So I search and found what seemed to be a great idea: UserControl.
But as usual, it's not that simple (for a badly self-taught guy like me)
The general flow of the program is as follows:
a Btn_uc1_Check button that gathers informations and displays them in a uc1_ListView,
a Btn_uc2_Seek button that gathers informations on the net based on the uc1_ListView , and displays them on uc2_ListView,
a Btn_uc3_compile that compiles the info from uc2_ListView into a file,
a Clear button that clears the ListView depending on the UserControl on screen.
Now to the problem:
How on earth do I gain access to a ListView located in a UserControl to be able to read, clear, and add items from the MainFrom or from another UserControl?
I searched and honestly found nothing corresponding to what I needed?
Quite many questions.
You can gain access to any controls in UC. Just change the property "Modifiers" of the ListView in your UC to "Public".
Set that method to public. Do not use keyword "static". Each control
in your form is an instance of a class, not a static class actually. In the main form, create a button and double click on it in VS designer. A method will automatically generated, something like private void button1_Click. When the button is clicked, all of the code lines in button1_Click will run.
Create a public event handler of your user control, then pass the method in main to the handler.
So the UC class will be similar to this:
public event EventHandler button_UC_Click_handler;
public UserControl1()
{
InitializeComponent();
}
private void button_UC_Click(object sender, EventArgs e)
{
button_UC_Click_handler.Invoke(sender, e);
}
In main form:
public MainForm()
{
InitializeComponent();
userControl11.button_UC_Click_handler += UserControl11_button_UC_Click_handler;
}
private void UserControl11_button_UC_Click_handler(object sender, EventArgs e)
{
MessageBox.Show("You have clicked it!");
}
Good luck!
I have a Windows Forms form where I am trying to show a user control when the form loads. Unfortunately, it is not showing anything. What am I doing wrong? Please see the code below:
AdministrationView wel = new AdministrationView();
public ProgramViwer()
{
InitializeComponent();
}
private void ProgramViwer_Load(object sender, System.EventArgs e)
{
formPanel.Controls.Clear();
formPanel.Controls.Add(wel);
}
Please note I added the load event based on what I read in this article:
http://msdn.microsoft.com/en-us/library/system.windows.forms.form.load.aspx
Three ways you can do this - from the form designer, select the form, and where you normally see the list of properties, just above it there should be a little lightning symbol - this shows you all the events of the form. Find the form load event in the list, and you should be able to pick ProgramViwer_Load from the dropdown.
A second way to do it is programmatically - somewhere (constructor maybe) you'd need to add it, something like: ProgramViwer.Load += new EventHandler(ProgramViwer_Load);
A third way using the designer (probably the quickest) - when you create a new form, double click on the middle of it on it in design mode. It'll create a Form load event for you, hook it in, and take you to the event handler code. Then you can just add your two lines and you're good to go!
You got half of the answer! Now that you created the event handler, you need to hook it to the form so that it actually gets called when the form is loading. You can achieve that by doing the following:
public class ProgramViwer : Form{
public ProgramViwer()
{
InitializeComponent();
Load += new EventHandler(ProgramViwer_Load);
}
private void ProgramViwer_Load(object sender, System.EventArgs e)
{
formPanel.Controls.Clear();
formPanel.Controls.Add(wel);
}
}
I am currently developing a Windows app with several forms. I use Form_Shown in one of those forms to execute some code to initialize (refresh) the form before showing it.
In Form.Shown Event on MSDN, it states that the event is raised only the first time the form is shown. However, I want to be able to execute code to initialize my form every time that I call Form.Show() in some of the forms. Here's an example.
From a form named Game. Contains an event handler Game_Shown and a button that when clicked shows a form named Menu:
private void btnMenu_Click(object sender, EventArgs e)
{
this.Hide();
Formulaires.formMenu.Show();
}
private void Game_Shown(object sender, EventArgs e)
{
Code here...
this.Refresh();
}
From the form named Menu. Contains a button that when clicked shows the form named Game:
private void lblGame_Click(object sender, EventArgs e)
{
this.Hide();
Formulaires.formGame.Show();
}
It is behaving by design.
From the docs:
The Shown event occurs whenever the form is first shown.
Also, you should not handle the Shown event in your class, rather you should override OnShown.
To achieve what you want, you might try overriding the OnVisibleChanged method. Inside the method, if the form is visible, then execute your code.
Like the Shown event, you should not handle it in your form class, instead override the appropriate method:
From the docs:
The OnVisibleChanged method also allows derived classes to handle the event without attaching a delegate. This is the preferred technique for handling the event in a derived class.
What you want requires some detailed knowledge about which event happens when in the WinForm lifecycle. That may be documented somewhere, I don't know.
This is how I would find out:
create a small test project with 2 forms (Main and helper)
add the show and hide buttons and make sure it works.
Add Debug.Print("EventName") to all the candidate events of the helper form.
Look at the log in the output window and pick your event.
Candidate events would be FormClosing, FormClosed, (De)Activated, Enter, Leave, Load, ... go through the list.
When you find the right one, please post it here in an answer.