When reading this, keep in mind I'm new to both programming and Unity, so I might be missing some terms or tools Unity offer. Please elaborate your answers in an ELI5 manner. Thanks in advance!
I am currently working on some game-physics for a small personal project. Currently I've created a platform, a character and what should be, a following companion.
However, since I'm still not on a level, where I can create perfect code on own hand, I found an "enemy" script and tried to modify it a bit.
It Works to an extend, but it needs some tweaks which I hope I can help aquire with you guys.
This is how it looks now (the orange square is the companion)
It follows the player, and I can tweak the speed to fit as a companion, and not a player. However, as the Picture presents, the companion runs for the center of the player. What I want to create is a companion which follows the player, but still keeps a small gap from the player.
My first thoughts was to create some kind of permanent offset, but I fail to figure out how to do this without messing up the follow function.
I hope you can help me, it will be much appreciated!
Here's the code for reference.
Code attached to Player:
using UnityEngine;
using System.Collections;
public class PlayerCompanion : MonoBehaviour
{
//In the editor, add your wayPoint gameobject to the script.
public GameObject wayPoint;
//This is how often your waypoint's position will update to the player's position
private float timer = 0.5f;
void Update ()
{
if (timer > 0) {
timer -= Time.deltaTime;
}
if (timer <= 0) {
//The position of the waypoint will update to the player's position
UpdatePosition ();
timer = 0.5f;
}
}
void UpdatePosition ()
{
//The wayPoint's position will now be the player's current position.
wayPoint.transform.position = transform.position;
}
}
Code attached to companion:
using UnityEngine;
using System.Collections;
public class FollowerOffset : MonoBehaviour {
//You may consider adding a rigid body to the zombie for accurate physics simulation
private GameObject wayPoint;
private Vector3 wayPointPos;
//This will be the zombie's speed. Adjust as necessary.
private float speed = 10.0f;
void Start ()
{
//At the start of the game, the zombies will find the gameobject called wayPoint.
wayPoint = GameObject.Find("wayPoint");
}
void Update ()
{
wayPointPos = new Vector3(wayPoint.transform.position.x, transform.position.y, wayPoint.transform.position.z);
//Here, the zombie's will follow the waypoint.
transform.position = Vector3.MoveTowards(transform.position, wayPointPos, speed * Time.deltaTime);
}
}
bump, I guess ? :)
You can use smooth follow script. I have created a sample class for you. This class has features to follow any given gameobject with some delay and offset. You will have to tweak some values according to your need.
using UnityEngine;
using System.Collections;
public class PlayerCompanion : MonoBehaviour
{
[SerializeField]
private GameObject wayPoint;
[SerializeField]
public Vector3 offset;
public Vector3 targetPos;//Edit: I forgot to declare this on firt time
public float interpVelocity;
public float cameraLerpTime = .1f;
public float followStrength = 15f;
// Use this for initialization
void Start ()
{
//At the start of the game, the zombies will find the gameobject called wayPoint.
wayPoint = GameObject.Find("wayPoint");
offset = new Vector3 (5,0,0);//input amount of offset you need
}
void FixedUpdate () {
if (wayPoint) {
Vector3 posNoZ = transform.position;
Vector3 targetDirection = (wayPoint.transform.position - posNoZ);
interpVelocity = targetDirection.magnitude * followStrength;
targetPos = transform.position + (targetDirection.normalized * interpVelocity * Time.deltaTime);
transform.position = Vector3.Lerp (transform.position, targetPos + offset, cameraLerpTime);
}
}
}
Attach this class to your player companion, play with different values.
To preserve object orientation your companion schould not be anyways child of your main character.
Your wayPoint doesn't needs to be a GameObject but a Transform instead and your code will looks like better.
If your game is a 2D platform your and your companion needs to be backwards your player it probabli applys to just one axis (X?) so you can decrement your waiPoint in a more directly way by calculating it on your UpdatePosition function like this:
wayPoint.position = transform.position * (Vector3.left * distance);
where your "distance" could be a public float to easily setup.
so on your companion script Update just do:
transform.position = Vector3.MoveTowards(transform.position, wayPoint.position, speed * Time.deltaTime);
I can't test it right now so you could have problems with Vector3 multiply operations, just comment and I'll try to fix as possible ;)
Related
I'm currently making a 2D game as a beginner and I made a spinning platform. But when it's rotating the player's rotation (z-axis) also changes because it's a child of the platform. I need this when I use moving platforms. Now I want to lock the z-axis of the rotation of the player. I already tried it in 3 different ways, but none of them seems to be working. Does anybody know how to do this?
These are the three ways I tried:
// 1
PlayerTrans.transform.Rotate(
PlayerTrans.transform.rotation.x,
PlayerTrans.transform.rotation.y,
0);
// 2
PlayerTrans.transform.Rotate(
PlayerTrans.transform.rotation.x,
PlayerTrans.transform.rotation.y,
0,
Space.Self);
// 3
PlayerTrans.transform.localRotation = Quaternion.Euler(new Vector3(
PlayerTrans.transform.localEulerAngles.x,
PlayerTrans.transform.localEulerAngles.y,
0f));
and this is, what my code looks like for staying on the moving platforms. I used raycasting for this:
using System.Collections;
using System.Collections.Generic;
using UnityEngine;
public class Raycasting : MonoBehaviour
{
// Start is called before the first frame update
Transform PlayerTrans;
public float RayCastRange = 3;
void Start()
{
PlayerTrans = transform.parent;
}
// Update is called once per frame
void Update()
{
RaycastHit2D PlattformCheck = Physics2D.Raycast(transform.position, -Vector2.up, RayCastRange);
if (PlattformCheck.collider != null)
{
if (PlattformCheck.collider.gameObject.tag == "Platform")
{
PlayerTrans.transform.SetParent(PlattformCheck.collider.gameObject.transform);
}
else
{
PlayerTrans.transform.SetParent(null);
}
}
else
{
PlayerTrans.transform.SetParent(null);
}
}
}
There are 2 ways that might help you:
Just freeze the rotation from the inspector:
you can use some LookAt function (there is one for 3D but you can look and find ones for 2D) and just look at the camera.
(if you cant find it let me know and I will add it)
You should raycast directly down and then apply velocities to both objects (un-child the player from the platforms). You could do something like this for the player:
public LayerMask mask; //set ‘mask’ to the mask of the
//platform in the Unity Editor.
public Vector3 velocity;
void Update()
{
RaycastHit hit;
if (Physics.Raycast(transform.position, -Vector3.up, out hit, 0.1f, mask))
//0.1f is the distance to the platform to be able to be moved by the platform.
{
velocity = hit.collider.gameObject.GetComponent<Platform>().velocity;
}
float h = Input.GetAxis(“Horizontal”);
//this one is for CharacterController:
cc.Move(velocity);
//this one is for rigidbody:
rb.velocity = velocity;
velocity = 0;
}
It takes the velocity from the ‘Platform’ script and moves the player based on it. Now we should add the platform script. Call it ‘Platform’.
public Vector3 velocity;
public Vector3 a; //a and b are the two points you want the platform to go between.
public Vector3 b;
public float period = 2f; //the amount of seconds per cycle.
float cycles;
void Update()
{
cycles = Time.time / period;
float amplitude = Mathf.Sin(Mathf.PI * 2f * cycles);
Vector3 location = Vector3.Lerp(a, b, amplitude);
velocity = transform.position - location;
transform.position = velocity;
}
This script interpolates between the point a and b, then it finds the velocity and applies it. The player takes this velocity and it moves the player. Comment if you found an error.
I'm pretty new to Unity. I tried to create a script that the camera would follow the actor (with a little difference). Is there a way to improve the code? It works just fine. But I wonder if I did it the best way. I want to do it about as I wrote, so if you have any tips. Thank you
Maybe change Update to FixedUpdate ?
public GameObject player;
// Start is called before the first frame update
void Start()
{
player = GameObject.Find("Cube"); // The player
}
// Update is called once per frame
void Update()
{
transform.position = new Vector3(player.transform.position.x, player.transform.position.y + 5, player.transform.position.z - 10);
}
Making the camera following the player is quite straight forward.
Add this script to your main camera.
Drag the reference of the player object to the script and then you are done.
You can change the values in the Vector 3 depending on how far you want the camera to be from the player.
using UnityEngine;
public class Follow_player : MonoBehaviour {
public Transform player;
// Update is called once per frame
void Update () {
transform.position = player.transform.position + new Vector3(0, 1, -5);
}
}
Follows player in the back constantly when the player rotates, no parenting needed, with smoothing.
Piece of Knowledges:
Apparently, Quaternion * Vector3 is going to rotate the point of the Vector3 around the origin of the Vector3 by the angle of the Quaternion
The Lerp method in Vector3 and Quaternion stand for linear interpolation, where the first parameter gets closer to the second parameter by the amount of third parameter each frame.
using UnityEngine;
public class CameraFollow : MonoBehaviour
{
public Transform target;
public float smoothSpeed = 0.125f;
public Vector3 locationOffset;
public Vector3 rotationOffset;
void FixedUpdate()
{
Vector3 desiredPosition = target.position + target.rotation * locationOffset;
Vector3 smoothedPosition = Vector3.Lerp(transform.position, desiredPosition, smoothSpeed);
transform.position = smoothedPosition;
Quaternion desiredrotation = target.rotation * Quaternion.Euler(rotationOffset);
Quaternion smoothedrotation = Quaternion.Lerp(transform.rotation, desiredrotation, smoothSpeed);
transform.rotation = smoothedrotation;
}
}
This will always follow the player from the same direction, and if the player rotates it will still stay the same. This may be good for top-down or side-scrolling view, but the camera setup seems to be more fitting for 3rd person, in which case you'd want to rotate the camera when the player turns.
The easiest way to do this is actually not with code alone, simply make the camera a child of the player object, that way its position relative to the player will always stay the same!
If you do want to do it through code, you can change the code to be like this:
void Update()
{
Vector3 back = -player.transform.forward;
back.y = 0.5f; // this determines how high. Increase for higher view angle.
transform.position = player.transform.position - back * distance;
transform.forward = player.transform.position - transform.position;
}
You get the direction of the back of the player (opposite of transform's forward). Then you increase the height a little so the angle will be a bit from above like in your example. Last you set the camera's position to be the player's position and add the back direction multiplied by the distance. That will place the camera behind the player.
You also need to rotate the camera so it points at the player, and that's the last line - setting the camera's forward direction to point at the player.
Here is just another option. I always find it easier to have the variables which are populated in the inspector so you can adjust it and fine tune it as needed.
public GameObject player;
[SerializeField]
private float xAxis, yAxis, zAxis;
private void Update()
{
transform.position = new Vector3(player.transform.position.x + xAxis, player.transform.position.y + yAxis, player.transform.position.z + zAxis);
}
I have a problem that main camera position doesn't change after CharacterController.SimpleMove() called. The task is to create scene where camera moves.
I have Main Camera game object with Character Controller and Script attached.
The issue is that nothing in vrCamera position changed after SimpleMove() called.
My question is what is wrong in this code. I suggest something wrong with binding between MainCamera object and CharacterController component, but I have spend a lot of time investigating and nothing working found.
using UnityEngine;
[RequireComponent(typeof(CharacterController))]
public class VRLookWalk : MonoBehaviour {
public Transform vrCamera;
public float toggleAngle = 30.0f;
public float speed = 3.0f;
public bool moveForwad;
private CharacterController cc;
// Use this for initialization
void Start () {
cc = vrCamera.GetComponent<CharacterController>();
}
// Update is called once per frame
void Update () {
if (vrCamera.eulerAngles.x >= toggleAngle && vrCamera.eulerAngles.x < 90.0f)
{
Vector3 forward = vrCamera.TransformDirection(Vector3.forward);
cc.SimpleMove(forward * speed);
}
}
}
You can't move the VR Camera, it's the SDK that determine the mainCamera position.
In order to move your camera you can just make a new GameObject as a parent of your mainCamera then move the parent GameObject
Try this. Your TransformDirection probably returns wrong vector.
Vector3 forward = vrCamera.transform.forward;
cc.SimpleMove(forward * speed);
Since the android should fly or move in the air too I guess I should also use physics too ? Not sure.
I added some spheres as waypoints and I want the android to move between them randomly including random range of movement and rotation speed. For example 1-10 range randomly speed for both movement and rotation.
Now what it does when I'm running the game the NAVI (1) is just moving in rounds none stop on small area not sure why, But it's not moving smooth between the spheres.
The idea is to make the NAVI droid to act like it's out of order.
This is screenshot of the NAVI (1) and it's inspector:
This screenshot is of the Waypoints attached to it Waypoints script:
This is the Waypoints script:
using System.Collections;
using System.Collections.Generic;
using UnityEngine;
public class Waypoints : MonoBehaviour
{
public Transform objectToMove;
public float moveSpeed = 3.0f;
public float rotationSpeed = 3.0f;
public GameObject[] waypoints;
public int currentWP;
private void Awake()
{
}
private void Start()
{
currentWP = 0;
}
private void Update()
{
if (waypoints.Length == 0) return;
var lookPos = waypoints[currentWP].transform.position - objectToMove.position;
lookPos.y = 0;
var rotation = Quaternion.LookRotation(lookPos);
objectToMove.rotation = Quaternion.Slerp(objectToMove.rotation, rotation, Time.deltaTime * rotationSpeed);
objectToMove.position += objectToMove.forward * moveSpeed * Time.deltaTime;
}
}
You are never changing currentWP. That means at every frame, you're rotating toward the same nav point and moving the droid back towards it.
You have to change the currentWP only when the droid reaches it. Use OnTrigger between the target nav point and the droid.
You can do it something like this .
//for example you've got 5 waypoints
currentWaypoint = Random.Range(1, 5);
Hope it helps
I have been trying to make a movement script for my player in a 2D game but without success. I do not know why it is not working.
The problem is that the player isn't moving. I have a RigidBody attached and gravity on. (Not sure if gravity makes such a difference but I just thought to mention it.)
using UnityEngine;
using System.Collections;
public class PlayerMovement : MonoBehaviour {
public Rigidbody rb;
public float speed = 10;
// Use this for initialization
void Start () {
}
// Update is called once per frame
void FixedUpdate () {
float mx = Input.GetAxisRaw("Horizontal");
float mz = Input.GetAxisRaw("Vertical");
Vector3 movement = new Vector3(mx, 0.0f, mz);
Debug.Log(movement);
rb.AddForce(movement * speed * Time.deltaTime);
}
}
You may wanna make sure you are adding enough force to actually cause the player to move. Try increasing the force variable incrementally until you see a change. Hope this helps!