This code only read ID 1 and I need to read all table. How can I go about this?
using (SqlConnection sqlConnection = new SqlConnection())
{
sqlConnection.ConnectionString = "Data Source=TOMMY-PC\\SQLEXPRESS; Initial Catalog=Test; Integrated Security=True;";
sqlConnection.Open();
SqlCommand sqlCommand = new SqlCommand("SELECT * FROM dbo.Users");
sqlCommand.Connection = sqlConnection;
SqlDataAdapter adapter = new SqlDataAdapter();
DataTable table = new DataTable();
adapter.SelectCommand = sqlCommand;
adapter.Fill(table);
if ((string)table.Rows[0]["Name"] == textBox2.Text)
{
MessageBox.Show("Founded");
}
}
If you are trying to find if a user with a specific name exists or not, then you don't need to read the whole table, but you could write a query that discovers if users with that name exist or not
using (SqlConnection sqlConnection = new SqlConnection())
using (SqlCommand sqlCommand = new SqlCommand())
{
sqlConnection.ConnectionString = "....."";
sqlCommand.Connection = sqlConnection;
sqlCommand.CommandText = #"SELECT COUNT(*) FROM dbo.Users
WHERE Name = #name";
sqlConnection.Open();
sqlCommand.Parameters.Add("#name", SqlDbType.NVarChar).Value = textBox2.Text;
int result = Convert.ToInt32(sqlCommand.ExecuteNonQuery());
if(result > 0)
MessageBox.Show("Founded " + result + " user/s");
else
MessageBox.Show("No user found with that name");
}
To answer your direct question: you need to do a foreach loop, like this:
foreach (var row in table.Rows.Cast<DataRow>())
{
var name = row["Name"];
//Continue here
}
To explain the use of the Cast method:
The table.Rows which is of type DataRowCollection implements the older IEnumerable interface which enumerates over the rows but give us the rows as objects of type object not DataRow. We cast them to DataRow by using the Cast method.
Related
I tried to get data in a drop down list and it's not working. I don't understand what's the problem.
string connString = #" Data Source=(LocalDB)\v11.0;AttachDbFilename='C:\Users\oshri\Documents\Stock scores.mdf';Integrated Security=True;Connect Timeout=30";
string queryLecturer = "select name_student from student";
SqlConnection conn = new SqlConnection(connString);
//SqlCommand cmdL = new SqlCommand(queryLecturer, conn);
conn.Open();
//SqlCommand SQLCommand = new SqlCommand();
//cmdL.CommandType = CommandType.Text;
//SQLCommand.CommandText = queryLecturer;
//conn.Close();
SqlDataAdapter adapter = new SqlDataAdapter(queryLecturer, conn);
adapter.Fill(subjects);
DropDownListID.DataSource = subjects;
DropDownListID.DataBind();
DropDownListID.DataBind();
conn.Close();
You are assigning a DataSet containing DataRowView items to your drop down. Your drop down (is it a System.Windows.Forms.ComboBox?) is not smart enough to extract the real values from this DataSet. Instead, use a SqlDataReader to read your string values and add them to a list that you can use as data source for your drop down.
string connString = #"Data Source=...";
string queryLecturer = "select name_student from student";
using (var conn = new SqlConnection(connString))
using (var cmd = new SqlCommand(queryLecturer)) {
conn.Open();
using (SqlDataReader reader = cmd.ExecuteReader()) {
var list = new List<string>();
while (reader.Read()) {
list.Add(reader.GetString(0)); // 0 is the column index.
}
DropDownListID.DataSource = list;
}
}
The using statements automatically close the connection and dispose resources at the end of the statement blocks. They do so even if the statement blocks are left prematurely because of an exception or because of a break or return statement.
I'm trying to get a value from my database but it keeps returning a value of 0 and i cannot figure out why. I've been retrieving data from the database for the whole of my project and it is just not working here. None of the values in the database are = to 0.
int rentalPrice is the one being returned as 0`
protected void Page_Load(object sender, EventArgs e)
{
if (Request.QueryString["id"] == null)
{
Response.Redirect("DisplayCars.aspx");
}
else
{
id = Convert.ToInt32(Request.QueryString["id"].ToString());
con.Open();
SqlCommand cmd = con.CreateCommand();
cmd.CommandType = CommandType.Text;
cmd.CommandText = "select * from cars where id ='" + id + "'";
cmd.ExecuteNonQuery();
lblCarID.Text = id.ToString();
DataTable dt2 = new DataTable();
SqlDataAdapter da2 = new SqlDataAdapter(cmd);
foreach (DataRow dr2 in dt2.Rows)
{
rentalPrice = Convert.ToInt32(dr2["car_rental_price"]);
}
lblRentalPrice.Text = rentalPrice.ToString();
con.Close();
}
// This uses a Connection pool, so you don't need to reuse the same SqlConnection
using (SqlConnection con = new SqlConnection(...))
{
using (SqlCommand cmd = con.CreateCommand())
{
cmd.CommandType = CommandType.Text;
cmd.CommandText = "select [car_rental_price] from cars where id = #Id";
var idParam = new SqlParameter("#Id");
idParam.Value = id;
cmd.Parameters.Add(idParam);
con.Open();
using (var reader = cmd.ExcecuteReader())
{
reader.Read();
lblRentalPrice.Text = reader.GetInt32(0).ToString();
lblCarID.Text = id.ToString();}
}
}
}
To execute a query and get results, you need to use cmd.ExecuteReader.
Also, rather than concatenating values into a string to build your SQL query, you need to use parameterized queries. This helps prevent SQL Injection attacks.
Also, SqlConnection should not be put in a field (class level variable). Instead, you should use local variables and wrap them in a using statement to ensure that they get disposed of properly.
hey you did not fill the Data Table.. then how it has any Values???
first Fill the data Table and use it in Foreach loop
adapter.Fill(DataTable);
foreach(DataRow dr in DataTable)
{
//get the id
}
I have created an Entity Framework application to retrieve Database values but i want to show them in individual labels instead of a gridview??
EmployEntities2 fd = new EmployEntities2();
int idToupdate = Convert.ToInt32(TextBox1.Text);
var jj = (from bn in fd.Contacts
where bn.Id == idToupdate
select bn);
GridView1.DataSource = jj;
GridView1.DataBind();
Established a connection
SqlConnection con = new SqlConnection("CONNECTION_STRING);
SqlCommand cmd = new SqlCommand();
and then,
cmd.CommandText = "select * from table where Condition ;
cmd.Connection = con
Label1.text = ((string)cmd.ExecuteScalar());
Try this one..
You should use SQLDataReader class. Base on what type of data you have in structure you should call a different method of the SQLDataReader object. For example, if you need to retrieve an integer value and display it in a label, this is the code sinppet to do it:
string queryString = "SELECT integer_value FROM table_name";
using (SqlConnection connection = new SqlConnection(connectionString))
{
SqlCommand command = new SqlCommand(queryString, connection);
connection.open();
SqlDataReader reader = command.ExecuteReader();
while (reader.Read())
{
label1.Text = reader.getSqlInt32(0).ToString();
}
reader.close();
}
This is the best I can do since you didn't provide additional info.
Check out this link for info on SqlDataReader class: SqlDataReader reference
I have the following:
String sql = "SELECT * FROM Temp WHERE Temp.collection = '" + Program.collection + "'";
SqlConnection conn = new SqlConnection(connString);
SqlCommand cmd = new SqlCommand(sql, conn);
Program.defaultCollection = (String)cmd.ExecuteScalar();
And I want to get the second column after executing the statement. I know it will return only one row with two columns
I have read online that I will have to read each row of the result, is there any other way?
ExecuteScalar gets the first column from the first row of the result set. If you need access to more than that you'll need to take a different approach. Like this:
DataTable dt = new DataTable();
SqlDataAdapater sda = new SqlDataAdapter(sql, conn);
sda.Fill(dt);
Program.defaultCollection = dt.Rows[0]["defaultCollection"];
Now, I realize that the field name may not be defaultCollection, but you can fill that in.
From the MSDN documentation for ExecuteScalar:
Executes the query, and returns the first column of the first row in the result set returned by the query. Additional columns or rows are ignored.
Now, as a final bit of advice, please wrap all ADO.NET objects in a using statement. Like this:
using (SqlConnection conn = new SqlConnection(connString))
using (SqlDataAdapter sda = new SqlDataAdapter(sql, conn))
{
DataTable dt = new DataTable();
sda.Fill(dt);
// do something with `dt`
}
this will ensure they are properly disposed.
And I want to get the second column after executing the statement
It is not possible with execute scalar.
is there any other way
You have 2 options here either to use SqlDataAdapter or SqlDataReader.
For you using DataReader is a recommended approach as you don't need offline data or do other worh
by using SqlDataAdapter
using (SqlConnection c = new SqlConnection(
youconnectionstring))
{
c.Open();
/
using (SqlDataAdapter a = new SqlDataAdapter(sql, c))
{
DataTable t = new DataTable();
a.Fill(t);
if(t.Rows.Count > 0)
{
string text = t.Rows[0]["yourColumn"].ToString();
}
}
}
by using DataREader
using (SqlConnection connection =
new SqlConnection(connectionString))
{
SqlCommand command =
new SqlCommand(sql, connection);
connection.Open();
SqlDataReader reader = command.ExecuteReader();
while (reader.Read())
{
//read data here
string text = reader.GetString(1)
}
reader.Close();
}
SqlCommand.ExecuteScalar() can be used only when the result have just one row and one column.
If you need more than one column to be returned, you should use something like this:
String sql = "SELECT * FROM Temp WHERE Temp.collection = '" + Program.collection + "'";
SqlConnection conn = new SqlConnection(connString);
using(SqlCommand cmd = new SqlCommand(sql, conn))
{
using(SqlDataReader rdr = cmd.ExecuteReader())
{
if(rdr.Read())
{
Program.defaultCollection = (String)rdr["Column1"];
Program.someOtherVar = (String)rdr["Column2"];
}
}
rdr.Close();
}
That will be the fastest way.
You can use a DataReader and read only the first column like:
IDataReader cReader = cmd.ExecuteReader();
if(cReader.Read())
{
string cText = cReader.GetString(1); // Second Column
}
ExecuteScalar only returns one value. You have to make sure your query only returns that value.
String sql = "SELECT temp.defaultCollection FROM Temp WHERE Temp.collection = '" + Program.collection + "'";
On a side note, read on SqlParameter. You don't want to concatenate values like that, you'll have a problem when the collection property contains a quote.
I want to populate data from a SQL Server database from many columns to many textboxes .. I have a code to populate just one box .. can someone edit my code... I want to pull data and show it in Name, Address, Telephone No and Date ... plz help .. this code works for only one textbox..
Thanks in advance
SqlConnection Conn = new SqlConnection(#"Data Source=rex;Initial Catalog=PersonalDetails;Integrated Security=True");
SqlCommand Comm1 = new SqlCommand("Select * From PersonalUsers ", Conn);
Conn.Open();
SqlDataReader DR1 = Comm1.ExecuteReader();
if (DR1.Read())
{
Name.Text = DR1.GetValue(0).ToString();
}
while (DR1.Read())
{
if(DR1.GetName() == "YourSQLColumnName")
{
YourTextBox.Text = (string) DR1["YourSQLColumnName"];
}
// Your Other textboxes and columns which you want to match should follow as this template
}
SqlCommand cmd = new System.Data.SqlClient.SqlCommand(sql, _conn);
SqlDataReader rdr = cmd.ExecuteReader();
System.Data.DataTable tbl = new System.Data.DataTable("Results");
tbl.Load(rdr);
if (tbl.Rows.Count > 0)
Name.Text = tbl.Rows[0]["column_name"].ToString();
string cs=System.Configuration.ConfigurationManager.ConnectionString["DBCS"].ConnectionString;
using(OracleConnection con=new OracleConnection(cs))
{
sql="select empname from Emp where empno='"+empno+"'";
OracleCommand cmd = new System.Data.OracleClient.OracleCommand(sql,con);
con.Open();
OracleDataReader rdr = cmd.ExecuteReader();
if(rdr.Read())
{
EmpName.Text=Convert.ToString(rd["empname"]);
}
}
I assume that you would like to take care of both more rows and more columns.
Try to specify the columns. It works without, but the performance is better if you do so.
I assume you have a class called PersonalUser with the specifed properties.
It is also nice to have it in an sorted order, so I added that
public List<PersonalUser> FetchMyData()
{
SqlConnection Conn = new SqlConnection(#"Data Source=rex;Initial Catalog=PersonalDetails;Integrated Security=True");
SqlCommand Comm1 = new SqlCommand("Select Name, Address, TelephoneNo,Date From PersonalUsers order by Name", Conn);
Conn.Open();
SqlDataReader DR1 = Comm1.ExecuteReader();
var result = new List<PersonalUser>();
while (DR1.Read())
{
result.Add(new PersonalUser {
Name = DR1.GetString(0);
Address= DR1.GetString(1);
TelephoneNo = DR1.GetString(2);
Date = DR1.GetString(3)
}
);
}
return result;
}
I would also, if the need is getting much complex than this, conidering using Entity Framwork..