Case:
double x = Math.Pow(Convert.ToDouble(0.07003 + 1 ),(1/12));
Console.WriteLine(x);
Output:
1
The above output is incorrect, because the result of x is 1 instead of 1.005657
How to convert 1/12 in a format that it gives fractional value and is accepted by Math.Pow().
And the real problem is division of 1 by 12 (1/12) which gives value 0 (instead of 0,083333...).
Try this:
double x = Math.Pow(Convert.ToDouble(0.07003 + 1 ),(1/12d));
This makes 12 a double which makes the result of 1/12 a double. So instead of getting 0 from that division the result will be 0.0833333333333333.
The literals 1 and 12 are both integers, so 1/12 is an integer division, giving an integer result (0). Change at least one literal to double or decimal to perform a floating point division.
To make a number literal a double, add decimal places (e.g. 1.0) or 'D' suffix (1D). To make it a decimal, add 'M' suffix (1M).
Related
How come dividing two 32 bit int numbers as ( int / int ) returns to me 0, but if I use Decimal.Divide() I get the correct answer? I'm by no means a c# guy.
int is an integer type; dividing two ints performs an integer division, i.e. the fractional part is truncated since it can't be stored in the result type (also int!). Decimal, by contrast, has got a fractional part. By invoking Decimal.Divide, your int arguments get implicitly converted to Decimals.
You can enforce non-integer division on int arguments by explicitly casting at least one of the arguments to a floating-point type, e.g.:
int a = 42;
int b = 23;
double result = (double)a / b;
In the first case, you're doing integer division, so the result is truncated (the decimal part is chopped off) and an integer is returned.
In the second case, the ints are converted to decimals first, and the result is a decimal. Hence they are not truncated and you get the correct result.
The following line:
int a = 1, b = 2;
object result = a / b;
...will be performed using integer arithmetic. Decimal.Divide on the other hand takes two parameters of the type Decimal, so the division will be performed on decimal values rather than integer values. That is equivalent of this:
int a = 1, b = 2;
object result = (Decimal)a / (Decimal)b;
To examine this, you can add the following code lines after each of the above examples:
Console.WriteLine(result.ToString());
Console.WriteLine(result.GetType().ToString());
The output in the first case will be
0
System.Int32
..and in the second case:
0,5
System.Decimal
I reckon Decimal.Divide(decimal, decimal) implicitly converts its 2 int arguments to decimals before returning a decimal value (precise) where as 4/5 is treated as integer division and returns 0
You want to cast the numbers:
double c = (double)a/(double)b;
Note: If any of the arguments in C# is a double, a double divide is used which results in a double. So, the following would work too:
double c = (double)a/b;
here is a Small Program :
static void Main(string[] args)
{
int a=0, b = 0, c = 0;
int n = Convert.ToInt16(Console.ReadLine());
string[] arr_temp = Console.ReadLine().Split(' ');
int[] arr = Array.ConvertAll(arr_temp, Int32.Parse);
foreach (int i in arr)
{
if (i > 0) a++;
else if (i < 0) b++;
else c++;
}
Console.WriteLine("{0}", (double)a / n);
Console.WriteLine("{0}", (double)b / n);
Console.WriteLine("{0}", (double)c / n);
Console.ReadKey();
}
In my case nothing worked above.
what I want to do is divide 278 by 575 and multiply by 100 to find percentage.
double p = (double)((PeopleCount * 1.0 / AllPeopleCount * 1.0) * 100.0);
%: 48,3478260869565 --> 278 / 575 ---> 0
%: 51,6521739130435 --> 297 / 575 ---> 0
if I multiply the PeopleCount by 1.0 it makes it decimal and division will be 48.34...
also multiply by 100.0 not 100.
If you are looking for 0 < a < 1 answer, int / int will not suffice. int / int does integer division. Try casting one of the int's to a double inside the operation.
The answer marked as such is very nearly there, but I think it is worth adding that there is a difference between using double and decimal.
I would not do a better job explaining the concepts than Wikipedia, so I will just provide the pointers:
floating-point arithmetic
decimal data type
In financial systems, it is often a requirement that we can guarantee a certain number of (base-10) decimal places accuracy. This is generally impossible if the input/source data is in base-10 but we perform the arithmetic in base-2 (because the number of decimal places required for the decimal expansion of a number depends on the base; one third takes infinitely many decimal places to express in base-10 as 0.333333..., but it takes only one decimal in base-3: 0.1).
Floating-point numbers are faster to work with (in terms of CPU time; programming-wise they are equally simple) and preferred whenever you want to minimize rounding error (as in scientific applications).
Does anyone know why integer division in C# returns an integer and not a float?
What is the idea behind it? (Is it only a legacy of C/C++?)
In C#:
float x = 13 / 4;
//== operator is overridden here to use epsilon compare
if (x == 3.0)
print 'Hello world';
Result of this code would be:
'Hello world'
Strictly speaking, there is no such thing as integer division (division by definition is an operation which produces a rational number, integers are a very small subset of which.)
While it is common for new programmer to make this mistake of performing integer division when they actually meant to use floating point division, in actual practice integer division is a very common operation. If you are assuming that people rarely use it, and that every time you do division you'll always need to remember to cast to floating points, you are mistaken.
First off, integer division is quite a bit faster, so if you only need a whole number result, one would want to use the more efficient algorithm.
Secondly, there are a number of algorithms that use integer division, and if the result of division was always a floating point number you would be forced to round the result every time. One example off of the top of my head is changing the base of a number. Calculating each digit involves the integer division of a number along with the remainder, rather than the floating point division of the number.
Because of these (and other related) reasons, integer division results in an integer. If you want to get the floating point division of two integers you'll just need to remember to cast one to a double/float/decimal.
See C# specification. There are three types of division operators
Integer division
Floating-point division
Decimal division
In your case we have Integer division, with following rules applied:
The division rounds the result towards zero, and the absolute value of
the result is the largest possible integer that is less than the
absolute value of the quotient of the two operands. The result is zero
or positive when the two operands have the same sign and zero or
negative when the two operands have opposite signs.
I think the reason why C# use this type of division for integers (some languages return floating result) is hardware - integers division is faster and simpler.
Each data type is capable of overloading each operator. If both the numerator and the denominator are integers, the integer type will perform the division operation and it will return an integer type. If you want floating point division, you must cast one or more of the number to floating point types before dividing them. For instance:
int x = 13;
int y = 4;
float x = (float)y / (float)z;
or, if you are using literals:
float x = 13f / 4f;
Keep in mind, floating points are not precise. If you care about precision, use something like the decimal type, instead.
Since you don't use any suffix, the literals 13 and 4 are interpreted as integer:
Manual:
If the literal has no suffix, it has the first of these types in which its value can be represented: int, uint, long, ulong.
Thus, since you declare 13 as integer, integer division will be performed:
Manual:
For an operation of the form x / y, binary operator overload resolution is applied to select a specific operator implementation. The operands are converted to the parameter types of the selected operator, and the type of the result is the return type of the operator.
The predefined division operators are listed below. The operators all compute the quotient of x and y.
Integer division:
int operator /(int x, int y);
uint operator /(uint x, uint y);
long operator /(long x, long y);
ulong operator /(ulong x, ulong y);
And so rounding down occurs:
The division rounds the result towards zero, and the absolute value of the result is the largest possible integer that is less than the absolute value of the quotient of the two operands. The result is zero or positive when the two operands have the same sign and zero or negative when the two operands have opposite signs.
If you do the following:
int x = 13f / 4f;
You'll receive a compiler error, since a floating-point division (the / operator of 13f) results in a float, which cannot be cast to int implicitly.
If you want the division to be a floating-point division, you'll have to make the result a float:
float x = 13 / 4;
Notice that you'll still divide integers, which will implicitly be cast to float: the result will be 3.0. To explicitly declare the operands as float, using the f suffix (13f, 4f).
Might be useful:
double a = 5.0/2.0;
Console.WriteLine (a); // 2.5
double b = 5/2;
Console.WriteLine (b); // 2
int c = 5/2;
Console.WriteLine (c); // 2
double d = 5f/2f;
Console.WriteLine (d); // 2.5
It's just a basic operation.
Remember when you learned to divide. In the beginning we solved 9/6 = 1 with remainder 3.
9 / 6 == 1 //true
9 % 6 == 3 // true
The /-operator in combination with the %-operator are used to retrieve those values.
The result will always be of type that has the greater range of the numerator and the denominator. The exceptions are byte and short, which produce int (Int32).
var a = (byte)5 / (byte)2; // 2 (Int32)
var b = (short)5 / (byte)2; // 2 (Int32)
var c = 5 / 2; // 2 (Int32)
var d = 5 / 2U; // 2 (UInt32)
var e = 5L / 2U; // 2 (Int64)
var f = 5L / 2UL; // 2 (UInt64)
var g = 5F / 2UL; // 2.5 (Single/float)
var h = 5F / 2D; // 2.5 (Double)
var i = 5.0 / 2F; // 2.5 (Double)
var j = 5M / 2; // 2.5 (Decimal)
var k = 5M / 2F; // Not allowed
There is no implicit conversion between floating-point types and the decimal type, so division between them is not allowed. You have to explicitly cast and decide which one you want (Decimal has more precision and a smaller range compared to floating-point types).
As a little trick to know what you are obtaining you can use var, so the compiler will tell you the type to expect:
int a = 1;
int b = 2;
var result = a/b;
your compiler will tell you that result would be of type int here.
I just converted 16 digit number as a float value.
float myVal =(float) 4447962230071312;
Console.WriteLine(myVal);
This gives the output:
4.44796223007131E+15
I tried below code,
long originalVal = (long)myVal;
Console.WriteLine(originalVal);
This gives the output:
4447962352582656
Console.WriteLine(myVal.ToString("0.#########"));
This gives the output:
4447962000000000
since, How to get back original value of 4447962230071312
float (or Single) uses 23 bits for fractional part only, and thus Single can represent integer values without round error up to
2**(23 + 1) - 1 == 16777215
you can switch to double which has 52 bit fractional part and so can represent integer value up to
2**(52 + 1) - 1 == 9007199254740991 > 4447962230071312
For details, see
https://en.wikipedia.org/wiki/Single-precision_floating-point_format
https://en.wikipedia.org/wiki/Double-precision_floating-point_format
Code:
double myVal = 4447962230071312.0;
long originalVal = (long)myVal;
I am having trouble with basic multiplication and division in C#.
It returns 0 for ((150 / 336) * 460) but the answer should be 205.357142857.
I presume this is because (150/336) is a fractional number, and C# rounds this down to 0.
How do I correctly calculate this taking into consideration all decimal places?
No, it is because 150/336 is an integer division which always truncates the decimal part since the result will also be an int.
So one of both must be a decimal number:
double d = 150d / 336;
See: 7.7.2 Division operator
The division rounds the result towards zero, and the absolute value of
the result is the largest possible integer that is less than the
absolute value of the quotient of the two operands. The result is zero
or positive when the two operands have the same sign and zero or
negative when the two operands have opposite signs.
((150 / 336) * 460)
Those numbers are integers, they have no decimal places. Since 150 / 336 evaluates to 0 in integer math, multiplying it by anything will also result in 0.
You need to explicitly make each number a double. Something like this:
((150d / 336d) * 460d)
You are doing integer arithmetic not floating/double. To specify a floating point double constant use the 'd' suffix.
double d = (150d / 336d) * 460d;
150/336 gives you an int as result, thus 0. you need to the division so it you'll have a double as result
(((double)150 / 336) * 460)
If you're using variables then you should write it down like this:
double d = ((double)firstNumber/ secondNumber) * thirdNumber;
For more information: https://www.dotnetperls.com/divide
Does anyone know why integer division in C# returns an integer and not a float?
What is the idea behind it? (Is it only a legacy of C/C++?)
In C#:
float x = 13 / 4;
//== operator is overridden here to use epsilon compare
if (x == 3.0)
print 'Hello world';
Result of this code would be:
'Hello world'
Strictly speaking, there is no such thing as integer division (division by definition is an operation which produces a rational number, integers are a very small subset of which.)
While it is common for new programmer to make this mistake of performing integer division when they actually meant to use floating point division, in actual practice integer division is a very common operation. If you are assuming that people rarely use it, and that every time you do division you'll always need to remember to cast to floating points, you are mistaken.
First off, integer division is quite a bit faster, so if you only need a whole number result, one would want to use the more efficient algorithm.
Secondly, there are a number of algorithms that use integer division, and if the result of division was always a floating point number you would be forced to round the result every time. One example off of the top of my head is changing the base of a number. Calculating each digit involves the integer division of a number along with the remainder, rather than the floating point division of the number.
Because of these (and other related) reasons, integer division results in an integer. If you want to get the floating point division of two integers you'll just need to remember to cast one to a double/float/decimal.
See C# specification. There are three types of division operators
Integer division
Floating-point division
Decimal division
In your case we have Integer division, with following rules applied:
The division rounds the result towards zero, and the absolute value of
the result is the largest possible integer that is less than the
absolute value of the quotient of the two operands. The result is zero
or positive when the two operands have the same sign and zero or
negative when the two operands have opposite signs.
I think the reason why C# use this type of division for integers (some languages return floating result) is hardware - integers division is faster and simpler.
Each data type is capable of overloading each operator. If both the numerator and the denominator are integers, the integer type will perform the division operation and it will return an integer type. If you want floating point division, you must cast one or more of the number to floating point types before dividing them. For instance:
int x = 13;
int y = 4;
float x = (float)y / (float)z;
or, if you are using literals:
float x = 13f / 4f;
Keep in mind, floating points are not precise. If you care about precision, use something like the decimal type, instead.
Since you don't use any suffix, the literals 13 and 4 are interpreted as integer:
Manual:
If the literal has no suffix, it has the first of these types in which its value can be represented: int, uint, long, ulong.
Thus, since you declare 13 as integer, integer division will be performed:
Manual:
For an operation of the form x / y, binary operator overload resolution is applied to select a specific operator implementation. The operands are converted to the parameter types of the selected operator, and the type of the result is the return type of the operator.
The predefined division operators are listed below. The operators all compute the quotient of x and y.
Integer division:
int operator /(int x, int y);
uint operator /(uint x, uint y);
long operator /(long x, long y);
ulong operator /(ulong x, ulong y);
And so rounding down occurs:
The division rounds the result towards zero, and the absolute value of the result is the largest possible integer that is less than the absolute value of the quotient of the two operands. The result is zero or positive when the two operands have the same sign and zero or negative when the two operands have opposite signs.
If you do the following:
int x = 13f / 4f;
You'll receive a compiler error, since a floating-point division (the / operator of 13f) results in a float, which cannot be cast to int implicitly.
If you want the division to be a floating-point division, you'll have to make the result a float:
float x = 13 / 4;
Notice that you'll still divide integers, which will implicitly be cast to float: the result will be 3.0. To explicitly declare the operands as float, using the f suffix (13f, 4f).
Might be useful:
double a = 5.0/2.0;
Console.WriteLine (a); // 2.5
double b = 5/2;
Console.WriteLine (b); // 2
int c = 5/2;
Console.WriteLine (c); // 2
double d = 5f/2f;
Console.WriteLine (d); // 2.5
It's just a basic operation.
Remember when you learned to divide. In the beginning we solved 9/6 = 1 with remainder 3.
9 / 6 == 1 //true
9 % 6 == 3 // true
The /-operator in combination with the %-operator are used to retrieve those values.
The result will always be of type that has the greater range of the numerator and the denominator. The exceptions are byte and short, which produce int (Int32).
var a = (byte)5 / (byte)2; // 2 (Int32)
var b = (short)5 / (byte)2; // 2 (Int32)
var c = 5 / 2; // 2 (Int32)
var d = 5 / 2U; // 2 (UInt32)
var e = 5L / 2U; // 2 (Int64)
var f = 5L / 2UL; // 2 (UInt64)
var g = 5F / 2UL; // 2.5 (Single/float)
var h = 5F / 2D; // 2.5 (Double)
var i = 5.0 / 2F; // 2.5 (Double)
var j = 5M / 2; // 2.5 (Decimal)
var k = 5M / 2F; // Not allowed
There is no implicit conversion between floating-point types and the decimal type, so division between them is not allowed. You have to explicitly cast and decide which one you want (Decimal has more precision and a smaller range compared to floating-point types).
As a little trick to know what you are obtaining you can use var, so the compiler will tell you the type to expect:
int a = 1;
int b = 2;
var result = a/b;
your compiler will tell you that result would be of type int here.