I am facing a problem in which I need to transform dates in a given input format into a target one. Is there any standard way to do this in C#?
As an example say we have yyyy.MM.dd as the source format and the target format is MM/dd/yyy (current culture).
The problem arises since I am using a parsing strategy that gives priority to the current culture and then if it fails it tries to parse from a list of known formats. Now say we have two equivalent dates one in the source culture above (2015.12.9) and the other in the current culture (9/12/2015). Then if we attempt to parse this two dates the month will be 12 for the first case and in the second will be 9, so we have an inconsistency (they were supposed to mean be the same exact date).
I believe that if existing it should be something as
DateTime.Convert(2015.12.9, 'yyyy/MM/dd', CultureInfo.CurrentCulture).
Any ideas?
EDIT:
Thank you all for your ideas and suggestions, however the interpretation most of you gave to my question was not quite right. What most of you have answered is a direct parse in the given format and then a conversion to the CurrentCulture.
DateTime.ParseExact("2015.12.9", "yyyy.MM.dd", CultureInfo.CurrentCulture)
This will still return 12 as month, although it is in the CurrentCulture format. My question thus was, is there any standard way to transform the date in yyyy.MM.d to the format MM/dd/yyy so that the month is now in the correct place and THEN parsed it in the target culture. Such function is likely to be unexisting.
DateTime.ParseExact is what you are looking for:
DateTime parsedDate = DateTime.ParseExact("2015.12.9", "yyyy.MM.d", CultureInfo.InvariantCulture);
Or eventualy DateTime.TryParseExact if you're not confident with input string.
I know it's late but I try to explain little bit deep if you let me..
I am facing a problem in which I need to transform dates in any format
to a target one.
There no such a thing as dates in any format. A DateTime does not have any implicit format. It just has date and time values. Looks like you have a string which formatted as date and you want to convert another string with different format.
Is there any standard way to do this in C#?
Yes. You can parse your string with DateTime.ParseExact or DateTime.TryParseExact first with specific format to DateTime and then generate it's string representation with a different format.
As an example say we have yyyy.MM.dd as the source format and the
target format is MM/dd/yyy (current culture).
I didn't understand what is the meaning of current culture in this sentences and I assume you want yyyy not yyy, but you can generate it as I described above like;
string source = "2015.12.9";
DateTime dt = DateTime.ParseExact(source, "yyyy.MM.d", CultureInfo.InvariantCulture);
string target = dt.ToString("MM/dd/yyyy", CultureInfo.InvariantCulture); // 12/09/201
The problem arises since I am using a parsing strategy that gives
priority to the current culture and then if it fails it tries to parse
from a list of known formats.
Since you didn't show any parsing strategy and there is no DateTime.Convert method in .NET Framework, I couldn't any comment.
Now say we have two equivalent dates one in the source culture above
(2015.12.9) and the other in the current culture (9/12/2015). Then if
we attempt to parse this two dates the month will be 12 and in the
second will be 9, so we have an inconsistency.
Again.. You don't have DateTime's. You have strings. And those formatted strings can't belong on any culture. Sure all cultures might parse or generate different string representations with the same format format a format does not belong any culture.
I assume you have 2 different string which different formatted and you wanna parse the input no matter which one it comes. In such a case, you can use DateTime.TryParseExact overload that takes string array for all possible formats as a parameter. Then generate it's string representation with MM/dd/yyy format and a culture that has / as a DateSeparator like InvariantCulture.
string s = "2015.12.9"; // or 9/12/2015
string[] formats = { "yyyy.MM.d", "d/MM/yyyy" };
DateTime dt;
if (DateTime.TryParseExact(s, formats, CultureInfo.InvariantCulture,
DateTimeStyles.None, out dt))
{
Console.WriteLine(dt.ToString("MM/dd/yyyy", CultureInfo.InvariantCulture));
}
The Simple and Best way to do it is Using .ToString() Method
See this code:
DateTime x =DateTime.Now;
To Convert This Just Write like This:
x.ToString("yyyyMMdd")//20151210
x.ToString("yyyy/MM/dd)//2015/12/10
x.ToString("yyyy/MMM/dd)//2015/DEC/10 //Careful About M type should be capital for month .
Hope helpful
Related
I was looking in the Microsoft doc's and I can't find any explanation why ParseExact doesn't understand my date.
Could somebody explain why this code throws an exception?
DateTime.ParseExact("6092019", "dMMyyyy", CultureInfo.InvariantCulture, DateTimeStyles.None)
From the docs: DateTime.ParseExact Method
If format is a custom format pattern that does not include date or
time separators (such as "yyyyMMddHHmm"), use the invariant culture
for the provider parameter and the widest form of each custom format
specifier. For example, if you want to specify hours in the format
pattern, specify the wider form, "HH", instead of the narrower form,
"H".
So in your case you probably should use approach suggested in John's answer - add "missing" zero and parse with wider date format "dd"
The problem here seems to be that d can be a one-digit or two-digit date, so the parser struggles to determine if "2102019" refers to the 2nd of November 2019, or the 21st of... and then it breaks. With delimiters, the parser is able to act more intelligently. It will happily parse "2-10-2019" using "d-MM-yyyy".
My suggested solution to your problem is to pad the string, and change your format string:
string dateToParse = "6092019";
string paddedDateToParse = dateToParse?.PadLeft(8, '0'); // 06092019
DateTime parsedDate = DateTime.ParseExact(paddedDateToParse, "ddMMyyyy", CultureInfo.InvariantCulture, DateTimeStyles.None);
Try it online
Here is a scenario.
You have a string that represents a date i.e. "Jan 25 2016 10:10 AM".
You want to know whether it represents a date in a specific culture.
You want to know what dateTime pattern satisfies this date string.
Example:
Date string is "Jan 25 2016 10:10 AM"
Culture is en-US
The POSSIBLE format for it could be "MMM dd yyyy HH:mm tt"
Implementation:
To get the list of all dateTime patterns you can get a CultureInfo.DateTimeFormat.GetAllDateTimePatterns()
Then try the overloaded version of DateTime.TryParseExact(dateString, pattern, culture, DateTimeStyles.None, out resultingDate) for each of the patterns above and see whether it can parse a date.
That should give you the needed dateTime pattern.
HOWEVER if we iterate all those patterns it will not find any matches!
This is even more weird if you try and use a DateTime.TryParse(dateString, culture, DateTimeStyles.None, out resultingDate) and it DOES parse the correct date!
So the question is how come the DateTime.TryParse knows the pattern of a date string when this info is not a part of CultureInfo and how to get to this info in a culture?
Thanks!
I agree with xanatos, there is no perfect solution for that and you can't assume that every format GetAllDateTimePatterns returns can be perfectly parsable with Parse or TryParse methods.
From DateTimeFormatInfo.GetAllDateTimePatterns;
You can use the custom format strings in the array returned by the
GetAllDateTimePatterns method in formatting operations. However, if
you do, the string representation of a date and time value returned in
that formatting operation cannot always be parsed successfully by the
Parse and TryParse methods. Therefore, you cannot assume that the
custom format strings returned by the GetAllDateTimePatterns method
can be used to round-trip date and time values.
If you see Remarks section on the page, there are only 42 formats that can be parsed by TryParse method in 96 formats that GetAllDateTimePatterns method returns for it-IT culture for example.7
Tarek Mahmoud Sayed responded as;
Parse/TryParse are implemented as finite state machine so it doesn’t
really use the date patterns in parsing. It just split the parsed
string into tokens and try to find if the token match specific part of
the date (like Month, day, day of week…etc.). in the other hand
ParseExact/TryParseExact will just parse the string according to the
passed format pattern.
In short, Parsing is really hard because there are a lot of things that can trip it up. And someone in some government could suddenly decide that country X should use D/M/Y instead of M/D/Y, or could have someone entering data used to the other format.
I talk a little about this on a blog post (toward the bottom-ish) https://web.archive.org/web/20190110065542/https://blogs.msdn.microsoft.com/shawnste/2005/04/05/culture-data-shouldnt-be-considered-stable-except-for-invariant/
DateTime.Parse attempts to guess what the input might be based on the pattern(s) and separators it sees in the specified culture. Unfortunately, some cultures are REALLY hard to guess at. For example, . has been used for time formats in some locales, so is 1.1.1 12.12.12 the 12th day of December 2012? Or the 1st day of January 2001?
ParseExact (as the other answers suggest) is more reliable as you can tell it exactly what you're looking for - even better, you can also tell the user exactly what to enter. (Hopefully this is human input). Unfortunately it requires the user to follow the template.
This is also why most date controls you encounter, especially on the web, have separate fields for month, day & year.
For machine readable formats its best to spit it out in some standard format and read it back in with that exact same format. We've had customers send data from one country to another using the CurrentCulture and wonder why their vendor can't read it ;-)
normally i parse date like this way
DateTime.Parse()
DateTime.ParseExact()
i am in situation where user run exe and pass date as argument. so user can give date with various format like
dd/MM/yyyy
MM/dd/yyyy
dd-MM-yyyy
MM-dd-yyyy
yyyyMMdd
so i have to parse that date. when date format is yyyyMMdd then i am parisng date like this way DateTime.ParseExact(this.enddate, "yyyyMMdd", CultureInfo.InvariantCulture).ToString("yyyy-MM-dd");
so guide me what code i should write to parse date which work for any date format. thanks
I would recommend that you standardize on a single format. Otherwise you will run into ambiguous dates in cases where you have dates that can be parsed by different formats, but represent different dates in both
Ex:
dd-MM-yyyy
MM-dd-yyyy
what code i should write to parse date which work for any date format
As a technical answer, you can pass multiple formats to DateTime.TryParseExact() via a string array containing all acceptable formats.
Practically, though, the others have already pointed out that there is no way to tell the difference between months and days when the format isn't strictly enforced.
One possible solution is to have the user pass the date in as three separate arguments, each flagged with some kind of indicator such as /y2013 /m11 /d12 or maybe y:2013 m:11 d:12. You can even mash them together like /y2013/m11/d12. Then you can use Regular Expressions to parse out the parts, or even just plain old string manipulation.
There's no built in way to parse dates which work for ANY format. However, you can quite easily define your own format using DateTimeFormatInfo, letting you convert more or less any format to a proper date, as long as you know the format ahead of time.
In every major website you enter the date using comboboxes for day/month/year
or some datetime widget. So I don't see a reason to use a textbox. If you really
need to, add a tooltip or a watermark with the predefined format and force the
user to it.
i am trying to format the date to this format. 01/20/2013 02:30PM EDT, using this
LastModified.ToString("MM/dd/yyyy HH:mmtt");
but the result is coming like this
01-20-2013 02:30PM dont know why it is showing '-' instead '/'.
Also, for timezome, it seems there is only format available like +02:00. But I want timezone as string, i could not find any format for this, how can I get is as string like EDT/PST/IST etc?
From the MSDN page on custom date and time format strings:
The "/" custom format specifier represents the date separator, which is used to differentiate years, months, and days. The appropriate localized date separator is retrieved from the DateTimeFormatInfoDateSeparator property of the current or specified culture.
If you want it to definitely use /, you should either use the invariant culture, or quote the slash ("MM'/'dd'/'yyyy hh':'mmtt"). Note that I've quoted the time separator as well, as that can vary by culture too. I've also changed it to use the 12 hour clock, as per Arshad's answer.
When using a custom date/time format, you should probably use the invariant culture anyway. (For example, it seems odd to use a UK culture to format the string in a US-centric way - today would normally be represented as 02/05/2013 in the UK, not 05/02/2013.)
In terms of a time zone specifier - I don't know any way to use the time zone abbrevation within date/time formatting. I would personally advise against using abbreviations anyway, as they can be ambiguous and confusing. I can't see anything within TimeZoneInfo which even exposes that information for you to manually add it.
(It's possible that in Noda Time we'll support formatting with the abbreviation, but probably not parsing, precisely because of the ambiguity.)
i have found one mistake is that ,HH means time in 24 HRS format. You can try
string date = "01/20/2013 02:30PM";
DateTime dtTime;
if (DateTime.TryParseExact(date, "MM/dd/yyyy hh:mmtt",
System.Globalization.CultureInfo.InvariantCulture,
System.Globalization.DateTimeStyles.None, out dtTime))
{
Console.WriteLine(dtTime);
}
Formatting of DateTime is influenced by your Culture and your format string. Your current culture (Thread.CurrentThread.CurrentCulture) uses the - as the default seperator of your date components.
The Culture of India uses - and since you are from Inda, it would make sence (see: http://en.wikipedia.org/wiki/Date_and_time_notation_in_India)
Two options:
Choose a correct Culture which uses the / by default as seperator. For example: LastModified.ToString("MM/dd/yyyy HH:mmtt", new CultureInfo("en-US"));
Or reformat your format string with the escape character \. For example: For example: LastModified.ToString("MM\/dd\/yyyy HH:mmtt");
See also: http://msdn.microsoft.com/en-us/library/8kb3ddd4.aspx
I rarely parse xml files and when I try to use the features integrated in Linq2Xml. However today I stumbled upon a date format I am not able to cast via:
XElement element = ...
var date = (DateTime)element;
The date is in the following format:
01/28/2009 02:31:54 CET
I already tried to parse the date using TryParse in various combinations, cultures, but whatever format I try the datetime parser complains about the space at position 20. Is there a way to parse this date without splitting the string or doing awkward things?
It sounds like the timezone abbreviations (e.g. CET) aren't recognized. Do you know the offset?
This person is having a related problem:
Parse DateTime with time zone of form PST/CEST/UTC/etc
An example from his post:
DateTime dt1 = DateTime.ParseExact("24-okt-08 21:09:06 CEST".Replace("CEST", "+2"), "dd-MMM-yy HH:mm:ss z", culture);
Obviously your date time format is a bit different, but it's an idea to bail you out.
If you can, ask the person giving you the XML to generate the date/times with ISO 8601 format to avoid custom parsing.