So, I have this simple code
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using OpenQA.Selenium;
using OpenQA.Selenium.Firefox;
using OpenQA.Selenium.PhantomJS;
class Program
{
static void Main(string[] args)
{
IWebDriver driver = new PhantomJSDriver();
driver.Navigate().GoToUrl("http://someurl");
try
{
IWebElement search = driver.FindElement(By.XPath("//*[#id=comboInput']"));
search.SendKeys(".");
IWebElement searchtext = driver.FindElement(By.XPath("//*[#id='itext']"));
searchtext.SendKeys(".");
IWebElement searchsend = driver.FindElement(By.XPath("//*[#id='buttonArea']/center/table/tbody/tr/td[2]/a")).Click();
Console.WriteLine("Did it");
}
catch
{
Console.WriteLine("Nope");
}
}
}
I have no idea what's wrong with this code. The error is :
cannot implicitly convert type 'void' to 'OpenQA.Selenium.Iwebelement'
And the problem is with IWebDriver driver
Note : If this is a stupid question and I'm missing some kind of obvious fix, let me know. But I honestly can't figure out what's wrong with this.
The problem is with this line:
IWebElement searchsend = driver.FindElement(By.XPath("//*[#id='buttonArea']/center/table/tbody/tr/td[2]/a")).Click();
You're assigning the result to searchsend but Click 'returns' void.
Related
I am trying to open the Register page from my account.
The UI developer used the bootstrap code. Bootstrap developers have added the JS function on click.
and when I run this code then show error "OpenQA.Selenium.ElementClickInterceptedException has been thrown
element click intercepted: Element ... is not clickable at point (984, 50). Other element would receive the click: ...
(Session info: chrome=77.0.3865.120)"
Attached Screenshot link:
https://monosnap.com/file/1z5PYCFBHfcXtkWJWVMi4SeejUXXOf
https://monosnap.com/file/hdq3194312RCnvc6GdQXLLVqtoezNJ
This my code
using System;
using System.Collections.Generic;
using System.Collections.ObjectModel;
using System.Linq;
using System.Text.RegularExpressions;
using System.Threading.Tasks;
using OpenQA.Selenium;
using OpenQA.Selenium.Chrome;
using OpenQA.Selenium.Support.UI;
namespace XTSeleniumtest
{
class MainClass
{
public static void Main(string[] args)
{
IWebDriver driver = new ChromeDriver();
driver.Navigate().GoToUrl("http://freshpicksdev.isrv.tech/");
driver.FindElement(By.CssSelector("div.modal-header .close")).Click();
driver.FindElement(By.XPath("//a[#id='navbarDropdown']/u")).Click();
}
}
}
**`
> strong text
`**
You can wait until the element is visible.
driver.FindElement(By.XPath("//a[#id='navbarDropdown']/u"));
If still the issue exists please post the DOM structure of your web page,it may be related to interacting with a wrong element.
Try the below code. You would need to add reference for "SeleniumExtras.WaitHelpers" from nuget
class MainClass
{
public static void Main(string[] args)
{
IWebDriver driver = new ChromeDriver();
driver.Navigate().GoToUrl("http://freshpicksdev.isrv.tech/");
driver.FindElement(By.CssSelector("div.modal-header .close")).Click();
WebDriverWait wait = new WebDriverWait(driver, TimeSpan.FromSeconds(10));
wait.IgnoreExceptionTypes(typeof(NoSuchElementException));
wait.Until(SeleniumExtras.WaitHelpers.ExpectedConditions.ElementToBeClickable(By.XPath("//u[contains(text(),'My Account')]")));
driver.FindElement(By.XPath("//u[contains(text(),'My Account')]")).Click();
driver.FindElement(By.XPath("//a[text()='Register']")).Click();
}
}
I'm fairly new to c# and writing a simple selenium code which will go onto www.asos.com. I then click on the country on the right hand side by finding the xpath. When I click on the country I want to change the country to 'india' and the currency to 'USD', and then select my preference.
I'm getting exception for driver.FindElement, SelectElement, SelectByValue previously when using java I wasn't getting these exceptions.
Exception I see for driver = The name driver doesn't exist in the current context
SelectElement = the type or namespace name 'SelectElement' could not be found
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using OpenQA.Selenium;
using OpenQA.Selenium.Chrome;
using OpenQA.Selenium.Support.UI;
namespace Exercise1
{
class Program
{
static void Main(string[] args)
{
IWebDriver webDriver = new ChromeDriver(#"Path to my chrome driver defined here");
webDriver.Navigate().GoToUrl("www.asos.com");
driver.FindElement(By.XPath("//*[#id="chrome - header"]/header/div[2]/div/ul/li[3]/div/button')]")).Click();
var country = driver.FindElement(By.Id("country"));
var select_country = new SelectElement(country);
select_country = SelectByValue("India");
var currency = driver.FindElement(By.Id("currency"));
var select_currency = new SelectElement(currency);
select_currency = SelectByValue("$ USD");
driver.FindElement(By.XPath("//*[#id="chrome - header"]/header/div[5]/div[2]/div/section/form/div[3]/button")).Click();
}
}
driver.FindElement(By.XPath("//*[#id="chrome - header"]/header/div[5]/div[2]/div/section/form/div[3]/button")).Click();
The erro in quotation marks, try:
driver.FindElement(By.XPath("//*[#id='chrome - header']/header/div[5]/div[2]/div/section/form/div[3]/button")).Click();
Use the value of the option in the html. Also call the select on the select element. For example:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using OpenQA.Selenium;
using OpenQA.Selenium.Chrome;
using OpenQA.Selenium.Support.UI;
namespace Exercise1
{
class Program
{
static void Main(string[] args)
{
IWebDriver driver= new ChromeDriver(#"Path to my chrome driver defined here");
driver.Navigate().GoToUrl("www.asos.com");
driver.FindElement(By.XPath("//*[#id='chrome - header']/header/div[2]/div/ul/li[3]/div/button')]")).Click();
var country = driver.FindElement(By.Id("country"));
var select_country = new SelectElement(country);
select_country.SelectByValue("IN");
var currency = driver.FindElement(By.Id("currency"));
var select_currency = new SelectElement(currency);
select_currency.SelectByValue("2");
driver.FindElement(By.XPath("//*[#id='chrome - header']/header/div[5]/div[2]/div/section/form/div[3]/button")).Click();
}
}
You may also want to throw in some waits to give the page time to load.
code:
using HtmlAgilityPack;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading;
using System.Threading.Tasks;
using System.IO;
using OpenQA.Selenium.PhantomJS;
using OpenQA.Selenium.Support.UI;
using OpenQA.Selenium;
namespace Scrape
{
class Program
{
static void Main(string[] args)
{
PhantomJSDriver driver = new PhantomJSDriver();
driver.Navigate().GoToUrl("http://www.regmovies.com/theatres/theatre-folder/edwards-west-oaks-mall-stadium-14-rpx-9364");
var nodes = driver.FindElementsByXPath(".//*[#id='content']/div/div/div[2]/div[1]/div/div[2]/div[1]/div/div[1]/h3/a");
foreach(var node in nodes)
{
Console.WriteLine(node.Text);
}
Console.Read();
}
}
}
the xpath is valid because it returns something on firebug
however it doesn't show any text.
whats going on?
however setting the xpath to
var nodes = driver.FindElementsByXPath("//a");
yields the movie names but not the specific xpath. what's going on?
Try waiting for the results to appear before getting the show links:
IWait wait = new WebDriverWait(driver, TimeSpan.FromSeconds(10));
wait.Until(ExpectedConditions.ElementIsVisible((By.CssSelector("div.results"))));
I'm getting the below error while running in NUnit,
I'm finding an element and storing it in a variable, and while trying to select the element, i'm getting the error. Tried using in this way
IWebElement fromitem = WebDriver.FindElement(By.Id("from")); but same error persists.
Is there any way i can select the element?
Note : I verified the element id with firebug, there seems to be no problem with it.
The code below,
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Text.RegularExpressions;
using System.Threading;
using NUnit.Framework;
using OpenQA.Selenium;
using OpenQA.Selenium.Firefox;
using OpenQA.Selenium.Support.UI;
using OpenQA.Selenium.Remote;
using OpenQA.Selenium.Support.Events;
using OpenQA.Selenium.Support.PageObjects;
namespace SeleniumTests
{
[TestFixture]
public class Sel
{
public static IWebDriver WebDriver;
private String baseURL;
[SetUp]
public void SetupTest()
{
WebDriver = new FirefoxDriver();
baseURL = "http://www.x-rates.com/calculator.html";
}
[TearDown]
public void TeardownTest()
{
WebDriver.Quit();
}
[Test]
public void newtest()
{
WebDriver.Navigate().GoToUrl(baseURL + "/");
var fromitem = WebDriver.FindElement(By.Id("from"));
var toitem = WebDriver.FindElement(By.Id("to"));
var fromval = new SelectElement(fromitem); //Error occurs
var toval = new SelectElement(toitem);
fromval.SelectByText("USD - US Dollar");
toval.SelectByText("INR - Indian Rupee");
WebDriver.FindElement(By.LinkText("Currency Calculator")).Click();
var curval = WebDriver.FindElement(By.CssSelector("span.ccOutputRslt")).GetAttribute("Value");
var expectedValue = 61.456825;
Thread.Sleep(900);
Assert.AreEqual(expectedValue, curval.Trim());
}
}
}
The SelectElement class can only be used with actual HTML <select> elements. In the page you provided, the element in question is an <input> element, with functionality added through CSS and JavaScript to enable it to act like a drop-down list. As such, attempting to use it with the SelectElement class will throw an exception indicating that the element is not of the correct type.
The "File does not exist" error message is a red herring. It's only there because NUnit is trying to show you the line of source code where the exception is thrown, which is a part of the WebDriver source code. The exception thrown by that line of code should be displayed somewhere within NUnit, which should contain the appropriate informational message.
I'm new to C# and I'm new to Speech.Recognition.
I searched very long for tutorials but didn't find that much, I'm even not quiet sure whether I included everything correctly.
I downloaded:
SDK
Runtime
Languages
I'm programming local, I have Windows XP, .net framework 3.5.
Now I just want to get started with some simple lines of code, like to say "hello world" or say one or two words as input.
I tried following, and of course it doesn't work :>
error:
"The Typ- or Namespacename "SpeechSynthesizer" couldn't be found (Is a Using-Direktive or a Assemblyverweis missing?)"
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Speech.Recognition;
using System.Speech.Synthesis;
namespace System.Speech.Recognition { }
namespace System.Speech.AudioFormat {}
namespace System.Speech.Recognition.SrgsGrammar{}
namespace System.Speech.Synthesis { }
namespace System.Speech.Synthesis.TtsEngine { }
namespace ConsoleApplication1
{
class Program
{
static void Main(string[] args)
{
SpeechSynthesizer foo = new SpeechSynthesizer();
foo.Speak("Test");
}
}
}
edit:
hello,
i tried you code,but
using SpeechLib;
couldn't be found :>
well now i wrote:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Speech.Recognition;
using System.Speech.Synthesis;
using System.SpeechLib;
namespace System.SpeechLib { }
namespace System.Speech.Recognition { }
namespace System.Speech.AudioFormat {}
namespace System.Speech.Recognition.SrgsGrammar{}
namespace System.Speech.Synthesis { }
namespace System.Speech.Synthesis.TtsEngine { }
but I get an error with:
numericUpDown1,SpVoice,SpeechVoiceSpeakFlags,textBox1 and Timeout
Project + Add Reference, .NET tab, select "System.Speech".
A project template pre-selects several .NET assemblies. But only common ones, like System.dll, System.Core.dll, etcetera. You have to add the 'unusual' ones yourself.
you can try this:
get Interop.SpeechLib.dll
using SpeechLib;
private void ReadText(string readText)
{
int iCounter = 0;
while (Convert.ToInt32(numericUpDown1.Value) > iCounter)
{
SpVoice spVoice = new SpVoice();
spVoice.Speak(textBox1.Text, SpeechVoiceSpeakFlags.SVSFPurgeBeforeSpeak);
spVoice.WaitUntilDone(Timeout.Infinite);
iCounter = iCounter + 1;
}
}