I'm struggling with Log4Net for a good while now. I have followed this post
as an example. The difference is, in my case, I have two separate projects, one with all objects that interacts with WebDriver and web elements (FrameworkProject), second is actual test project(TestProject). I have read a lot and I'm almost sure I have set it correctly...
FrameworkProject assembly file includes [assembly: log4net.Config.XmlConfigurator(Watch = true)]
My Log4Net.config file is as follow:
<configuration>
<configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" />
</configSections>
<log4net>
<root>
<level value="ALL" />
<appender-ref ref="MyAppender" />
<appender-ref ref="MyFileAppender" />
</root>
<appender name="MyAppender" type="log4net.Appender.ConsoleAppender">
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date %level %logger - %message%newline" />
</layout>
</appender>
<appender name="MyFileAppender" type="log4net.Appender.FileAppender">
<file value="application.log" />
<appendToFile value="true" />
<lockingModel type="log4net.Appender.FileAppender+MinimalLock" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date %level %logger - %message%newline" />
</layout>
</appender>
</log4net>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" />
</startup>
</configuration>
When I debug my SpecFlow tests and I reach the line XmlConfigurator.Configure(); (look example above) I'm still getting
log4net:ERROR Failed to find configuration section 'log4net' in the application's.
This drops me mad now and I have no clue of what might be wrong. Could this be the cause of running test?? Note: I have log4net set up ONLY in FrameworkProject
I have log4net set up ONLY in FrameworkProject
That's the problem. Roughly speaking, your "entry point" during test execution is your Test Project, hence it's looking for log4net configuration section inside of "entry point's" application configuration file (Test Project's app.config). Thus you should move your log4net configuration to Test Project's application configuration file.
On a second notice, it looks like you don't need to call XmlConfigurator.Configure if you use assembly level attribute: 1, 2.
Related
I'm working on a pet .netcore2.1 project using Rider IDE. I'm currently trying to add log4net support for the project, and trying to do it the "proper way" (separate config file, automatically configure log4net without having to write code for intialization etc.). So far all tutorials (ex1, ex2) I've found suggest configuring it by adding assembly property
[assembly: log4net.Config.XmlConfigurator(Watch=true)]
to AssemblyInfo.cs file. However I seem to fail to find the file, and it looks from other questions (e.g. this) that it might not be used with .netcore at all, in favor of doing configuration via other means (e.g. .csproj file).
So far I've found a workaround here, which works, but it uses explicit configuration via code, which looks like a step backwards compared to assembly-level configuration.
Is there a way of doing this in a more static way (e.g. using some ItemGroup in .csproj)?
Upd: for future reference - this is just a custom case of https://learn.microsoft.com/en-us/dotnet/standard/assembly/set-attributes , so it just goes to .cs file directly.
Easy example using log4net for .net core in console:
[assembly: XmlConfigurator(Watch = true)]
namespace ConsoleApp
{
class Program
{
private static readonly ILog log = LogManager.GetLogger(typeof(Program));
static void Main(string[] args)
{
var logRepository = LogManager.GetRepository(Assembly.GetEntryAssembly());
XmlConfigurator.Configure(logRepository, new FileInfo("log4net.config"));
log.Info("Entering application.");
log.Error("Error application.");
}
}
}
You need to add file with settings log4net to your project: log4net.config, and don't forget chnage it options "Copy to output directory" to "Copy if newer" or "Copy always"
Example of log4net.config:
<?xml version="1.0" encoding="utf-8" ?>
<log4net>
<appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender" >
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %-5level %logger [%ndc] - %message%newline" />
</layout>
</appender>
<appender name="FileAppender" type="log4net.Appender.RollingFileAppender">
<lockingModel type="log4net.Appender.FileAppender+MinimalLock" />
<file value="logs/" />
<datePattern value="yyyy-MM-dd'.log'" />
<staticLogFileName value="false" />
<appendToFile value="true" />
<rollingStyle value="Composite" />
<layout type="log4net.Layout.PatternLayout">
<IgnoresException value="False" />
<conversionPattern value="%date [%thread] %-5level %logger [%ndc] - %message%newline" />
</layout>
<filter type="log4net.Filter.LevelRangeFilter">
<param name="LevelMin" value="INFO"/>
</filter>
</appender>
<root>
<level value="ALL" />
<appender-ref ref="FileAppender" />
<appender-ref ref="ConsoleAppender" />
</root>
</log4net>
By the way: log4net don't supporting for 1 april 2020: http://logging.apache.org/log4net/
I have a class library that performs a routine needed for installation. From everything I have researched, I believe I have things set up correctly. However, the routine absolutely will not log anything. Here is what I have:
I have added the class library project as a reference to the host project.
In my class library, I have the following:
private static readonly ILog Log = LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
public InstallDLL() {
Log.Error("Where are you goinng?");
}
In the host application, I have added the following line to the AssemblyInfo.cs class: [assembly: log4net.Config.XmlConfigurator(Watch = true)]
Finally, this is the content of my app.config file:
<configuration>
<configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,Log4net"/>
</configSections>
<log4net>
<appender name="TestAppender" type="log4net.Appender.RollingFileAppender" >
<file value=".\Log Directory\MyTestAppender.log" />
<encoding value="utf-8" />
<appendToFile value="true" />
<rollingStyle value="Date" />
<rollingStyle value="Size" />
<maxSizeRollBackups value="5" />
<maximumFileSize value="2MB" />
<staticLogFileName value="true" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %-5level %logger [%M %C] - %message%newline" />
</layout>
</appender>
<root>
<level value="ALL" />
<!-- If the following line is not included the log file will not be created even if log4net is configured with this file. -->
<appender-ref ref="TestAppender" />
</root>
</log4net>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.1" />
</startup>
</configuration>
I have to be missing something, but what? Keep in mind that logging works fine from the host application...
**** EDIT ********************************************************************
I think I may know what is going on here. The .dll file produced by this project runs BEFORE the host project runs because it is part of the installation script. I think the host project has to run first to initialize the log4net configurations. When I call the method in the .dll file FROM the host application, and not from the installer package, the log4net logging works just fine. Does anyone know if this is root cause, and how I can get around this?
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.6.1" />, Can you check your Target Framework in Assembly properties?
I just compared with my config file, I have this <log4net debug="true">. Could you please add this?
I am using log4net to perform daily logging.
I realize that log4net doesn't support deleting old files in this fashion.
I am trying to write my own method to accomplish this task, however I am no sure how to read the log4net settings from the web.config file.
I've tried:
var log4NetData = ConfigurationManager.GetSection("log4net");
However I get this as my results:
The type 'System.Configuration.ConfigXmlElement' exists in both 'System.Configuration.dll' and 'System.dll'
How can I read the log4net node from my web.config?
Actually Log4Net can update the same file always (this way, there is no need to delete it and create another one).
I'm using log4Net to log always the same file n times in a hour. My configurations:
private static readonly log4net.ILog log = log4net.LogManager.GetLogger(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
app.config:
<configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net"/>
</configSections>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
<log4net>
<root>
<level value="ALL" />
<appender-ref ref="MyFileAppender" />
</root>
<appender name="MyFileAppender" type="log4net.Appender.FileAppender">
<file value="application.log" />
<appendToFile value="true" />
<lockingModel type="log4net.Appender.FileAppender+MinimalLock" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date %level - %message%newline" />
</layout>
</appender>
</log4net>
I'm getting started with log4net.I'm working on a small console project in which i must implement this framework.
At the beginning i created a small console project to see how it works without any other code.
I managed to make it work properly.
Now i try to migrate all the code in my application and i get this error when i execute the .exe of my console application:
"ERROR failed to find configuration section "log4net" in the application's .config
file.Check your .config file for the <log4net> and <configSections> elements. The
configuration section should look like : <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler.log4net"/>
The code:
public class Program
{
private static readonly log4net.ILog log = log4net.LogManager.GetLogger
(System.Reflection.MethodBase.GetCurrentMethod().DeclaringType);
public static void Main(string[] args)
{
log4net.Config.XmlConfigurator.Configure();
ILog log = log4net.LogManager.GetLogger(typeof(Program));
...
The app.config didn't exist yet so its content is the same as the test project i did:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,Log4net" />
</configSections>
<log4net>
<appender name="FileAppender" type="log4net.Appender.FileAppender,log4net">
<file value="D:\WEB\SAI\log\nas\log.txt" />
<appendToFile value="true" />
<lockingModel type="log4net.Appender.FileAppender+MinimalLock" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date [%thread] %level %logger - %message%newline" />
</layout>
<filter type="log4net.Filter.LevelRangeFilter">
<levelMin value="INFO" />
<levelMax value="FATAL" />
</filter>
</appender>
<root>
<level value="INFO"/>
<appender-ref ref="FileAppender"/>
</root>
</log4net>
</configuration>
After some searches on internet, i added:
[assembly: log4net.Config.XmlConfigurator()]
to my AssemblyInfo.cs as it was suggested but the result is still the same...
Thanks in advance for your help
ADD
[assembly: log4net.Config.XmlConfigurator(ConfigFile = "log4net.config", Watch = true)]
in AsseblyInfo.cs
Had something weird start happening to me today. I have an asp.net mvc app with log4net setup and everything had been working fine. Something must have changed somewhere and now nothing is getting logged (no log file is being created).
Here's my global.asax.cx
protected void Application_Start()
{
log4net.Config.XmlConfigurator.Configure();
}
Here's my configuration in my web.config:
<configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net"/>
</configSections>
<log4net>
<appender name="FileAppender" type="log4net.Appender.RollingFileAppender">
<file value="c:\logs\api\ApiLog.txt" />
<appendToFile value="true" />
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date - %message%newline" />
</layout>
</appender>
<root>
<level value="ALL" />
<appender-ref ref="FileAppender" />
</root>
</log4net>
For some reason the c:\logs\api\apilog.txt file never gets created. However, if I change my application_start method to this it works fine:
log4net.Config.XmlConfigurator.Configure(new FileInfo("DirectPathToMy\web.config"));
Any ideas why calling Configure() is not finding the configuration in my web.config by default?
Don't know why your approach don't work but the issue is that you need to make sure it is activated in your project.
I usually put this as an assembly level reference in my AssemblyInfo.cs under /Properties:
[assembly: log4net.Config.XmlConfigurator()]
Reference:
http://logging.apache.org/log4net/release/manual/configuration.html