I am trying to call a very simple SQL Server stored procedure using C# code. I have a class which has authenticate method. I am passing text box values (userID, password) to this method and it keeps on throwing me error about required parameter not being passed. I am basically a Business Intelligence professional working on C# project. Help will be appreciated.
Here is the code I am executing:
sqcon.Open();
SqlCommand cmd = new SqlCommand("Users.PR_Authenticate_WebUsers",sqcon);
cmd.Parameters.Add("#In_UserID", SqlDbType.VarChar).Value = "f";
cmd.Parameters.Add("#In_PassWord", SqlDbType.NVarChar).Value = "f";
cmd.Parameters.Add("#Out_IsAuthenticatedUser", SqlDbType.Bit);
cmd.Parameters["#Out_IsAuthenticatedUser"].Direction = ParameterDirection.Output;
cmd.ExecuteNonQuery();
sqcon.Close();
I don't understand when I am passing parameter values explicitly why it complains about value not being passed? Am I missing something?
Hmmm looks like you are not telling the command object that it is a stored procedure not a regular query try this one
sqcon.Open();
SqlCommand cmd = new SqlCommand("Users.PR_Authenticate_WebUsers",sqcon);
cmd.CommandType = CommandType.StoredProcedure;
//Add parameters like this
cmd.Parameters.Add(new SqlParameter("#In_UserID", "f"));
sqcon.Close()
Related
I'm trying to get a count of column records in a Sql database and show the result in a MessageBox.
This is my code:
public DataTable CheckIfNameExist(string name)
{
con = Connect();
cmd = new SqlCommand();
cmd.Connection = con;
cmd.CommandText = "spCheckIfNameExist";
cmd.Parameters.AddWithValue("#Name", SqlDbType.NVarChar).Value = name;
MessageBox.Show(name);
Int32 totalNames = (Int32) cmd.ExecuteScalar();
string tNames = totalNames.ToString();
MessageBox.Show(tNames);
}
And this is my sp:
#Name nvarchar(50) = null
As
Begin
SELECT COUNT(*) from OrdersSent where CustomerName LIKE #Name + '%'
End
Problem:
It always returns 0.
There are a couple of errors in your code:
You should write it as:
cmd.CommandText = "spCheckIfNameExist";
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add("#Name", SqlDbType.NVarChar).Value = name;
First you need to tell the ADO engine that you are calling a stored procedure and not a simple command text, but you also need to use Add instead of AddWithValue to be precise on the type of the parameter passed to the SP. Your code creates a parameter int becase the second parameter of the AddWithValue is the Value of the parameter not the type.
You have a few problems in the c# code - the most important is probably this:
cmd.Parameters.AddWithValue("#Name", SqlDbType.NVarChar).Value = name;
Don't use AddWithValue. Use Add.
Also, you didn't specify the command type - the default is Text.
And you are using fields for SqlConnection and SqlCommand - which is also the wrong thing to do. You should create and dispose both of them inside each method you are using them.
A better version of your code would be this:
using(var con = new SqlConnection(ConnectionString))
{
using(var cmd = new SqlCommand("spCheckIfNameExist", con))
{
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add("#Name", SqlDbType.NVarChar).Value = name;
con.Open();
var tNames = cmd.ExecuteScalar().ToString();
}
}
Another thing that puzzles me is why a method called CheckIfNameExist returns a DataTable. I would expect it to simply return a bool.
If you really only want to check if the name exists, you can do this better on both the SQL level and the c# level.
A better SQL would be something like this:
SELECT CAST(CASE WHEN EXISTS(
SELECT 1
FROM OrdersSent
WHERE CustomerName LIKE #Name + '%'
) THEN 1 ELSE 0 END AS bit)
And on the c# level, bit translates directly to bool, so the code can simple be this:
public bool CheckIfNameExist(string name)
{
using(var con = new SqlConnection(ConnectionString))
{
using(var cmd = new SqlCommand("spCheckIfNameExist", con))
{
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add("#Name", SqlDbType.NVarChar).Value = name;
con.Open();
return (bool)cmd.ExecuteScalar();
}
}
}
And another note - you should avoid using the sp prefix for stored procedures.
Microsoft have reserved this prefix for built in system procedures.
For more information, read Aaron Bertrand's Is the sp_ prefix still a no-no?, where you'll see that the short answer to this question is "Yes".
The sp_ prefix does not mean what you think it does: most people think sp stands for "stored procedure" when in fact it means "special." Stored procedures (as well as tables and views) stored in master with an sp_ prefix are accessible from any database without a proper reference (assuming a local version does not exist). If the procedure is marked as a system object (using sp_MS_marksystemobject (an undocumented and unsupported system procedure that sets is_ms_shipped to 1), then the procedure in master will execute in the context of the calling database.
You need to specify the type of your command like this:
cmd.CommandText = "spCheckIfNameExist";
cmd.CommandType = CommandType.StoredProcedure;
See also:
What is the benefit of using CommandType.StoredProcedure versus using CommandType.Text?
Although specify the type directly and use the Value property is more better than AddWithValue:
cmd.Parameters.Add("#Name", SqlDbType.NVarChar).Value = name;
The following article could be also interesting:
https://blogs.msmvps.com/jcoehoorn/blog/2014/05/12/can-we-stop-using-addwithvalue-already/
I am fairly new to C# and I'm trying to set up call to a stored procedure in my database which takes one parameter.
I get the error "Procedure or function 'SP_getName' expects parameter '#username', which was not supplied. "
My Stored procedure works ok when I supply it with the parameter and I run it via SQL management studio.
GO
DECLARE #return_value int
EXEC #return_value = [dbo].[SP_getName]
#username = 'bob101'
SELECT 'Return Value' = #return_value
GO
However when I try and call it the error is with how I'm passing the parameter in, but I can't spot what the issue is.
//create a sql command object to hold the results of the query
SqlCommand cmd = new SqlCommand();
//and a reader to process the results
SqlDataReader reader;
//Instantiate return string
string returnValue = null;
//execute the stored procedure to return the results
cmd.CommandText = "SP_getName";
//set up the parameters for the stored procedure
cmd.Parameters.Add("#username", SqlDbType.NVarChar).Value = "bob101";
cmd.CommandType = CommandType.Text;
cmd.Connection = this.Connection;
// then call the reader to process the results
reader = cmd.ExecuteReader();
Any help in spotting my error would be greatly appreciated!
I've also tried looking at these two posts, but I haven't had any luck:
Stored procedure or function expects parameter which is not supplied
Procedure or function expects parameter, which was not supplied
Thanks!
You have stated:
cmd.CommandType = CommandType.Text;
Therefore you are simply executing:
SP_getName
Which works because it is the first statement in the batch, so you can call the procedure without EXECUTE, but you aren't actually including the parameter. Change it to
cmd.CommandType = CommandType.StoredProcedure;
Or you can change your CommandText to:
EXECUTE SP_getName #username;
As a side note you should Avoid using the prefix 'sp_' for your stored procedures
And a further side note would be to use using with IDisposable objects to ensure they are disposed of correctly:
using (var connection = new SqlConnection("ConnectionString"))
using (var cmd = new new SqlCommand("SP_getName", connection))
{
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add("#username", SqlDbType.NVarChar).Value = "bob101";
connection.Open();
using (var reader = command.ExecuteReader())
{
while (reader.Read())
{
// Do something
}
}
}
I had this problem, but it wasn't about parameter name of Command Type.
My problem was that when C# calls SP, for each parameter that has no value passes 'default' keyword (i found it in SQL Profiler):
... #IsStop=0,#StopEndDate=default,#Satellite=0, ...
in my case my parameter Type was DateTime :
#StopEndDate datetime
. I Solved my problem by seting default value to this parameter in Stored Procedure :
#StopEndDate datetime=null
Try remove #:
cmd.Parameters.Add("username", SqlDbType.NVarChar).Value = "bob101";
I have an Informix database which exposes some stored procedures, I have an abstracted data accessor that handles communicating with them but I have a problem with a null value.
Directly you can call:
execute procedure some_stored_procedure(1,2,NULL,3)
and get back correct results, I would rather there not be this nullable field, but it is out of my hands. Anyway I was originally trying to call it like so:
var command = connection.CreateCommand();
command.CommandType = CommandTypes.StoredProcedure
command.CommandText = "some_stored_procedure"
// Pass in the parameters
However doing that causes Informix to throw a syntax error, so instead I have been forced to go with the:
var command = connection.CreateCommand();
command.CommandText = "execute procedure some_stored_procedure(?,?,?,?)";
// Pass in parameters
Which works but never passes back correct results, and if I try and make parameter 3 null it gives another syntax error. Am I missing something or is there a better way to call these stored procedures?
try parameterizing the parameters (you can use OdbcParameters if working with the odbcdriver) and then pass DbNull.Value where Null is required.
Try this:
var command = connection.CreateCommand();
command.CommandType = CommandTypes.Text;
command.CommandText = "call some_stored_procedure(?,?,?,?)";
command.Parameters.Add(param); //add all your parameters.
Format the query as follow:
strQuery = string.Format("EXECUTE PROCEDURE Cronos_UpdateStateLegacyProduct ({0})", oValidityProducts.PurchaseId);
OdbcConnection oConnection = new OdbcConnection(this.strConnectionString);
OdbcCommand oCommand = new OdbcCommand();
oCommand.CommandType = CommandType.StoredProcedure;
oCommand.CommandText = strQuery;
oCommand.Connection = oConnection;
oConnection.Open();
intResult = oCommand.ExecuteNonQuery();
Best Regards
In case you are using an ODBC connection, when using CommandType.StoredProcedure you must use a diferent syntax for the procedure's name. In your case:
CommandText = "{ CALL some_stored_procedure(?,?,?,?)}"
Check this link for more information: https://support.microsoft.com/en-us/kb/310130
kindly let me know how to insert two variables. its not a problem giving directly my userid and mobile in the code like
string insert =#"Insert into userHistory(userid,mobile) values(x,y)";
This is my code, but it fails to insert (editors note: OP provided no error)
int userid = 123456;
long mobile = 91888888888;
sqlConn = new MySqlConnection(/* conn string removed */);
sqlConn.Open();
string insert =
#"Insert into userHistory(userid,mobile) values(#userid,#mobile);";
MySqlCommand cmd = new MySqlCommand(insert,sqlConn);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add(new MySqlParameter("#userid", userid));
cmd.Parameters.Add(new MySqlParameter("#mobile", mobile));
Without more Information, I guess the type of your command should be "Text" and not CommandType.StoredProcedure, since you do not execute a SP. And you have to execute the command (maybe this is only missing in your code)
this is wrong cmd.CommandType = CommandType.StoredProcedure the command is should be CommandType.Text
You can read more about the CommandType enumeration here.
There are some more .net examples for MySql here
I think the issue is cmd.CommandType = CommandType.StoredProcedure;
You are trying to execute an ad-hoc query, not a Stored Procedure. Try changing it to
cmd.CommandType = CommandType.Text;
I have an oracle package with a procedure that has a in out reference cursor. My understanding is that this is pretty standard.
What I didn't like is the fact that I had to write a ton of code to just see the output. So I asked this question and it turns out I can get what I want by creating a function that wraps the procedure.
Update: Looks like I don't need the function anymore but it may be worth knowing anyway for those curious see the original question and answer updates.
Here's the function
FUNCTION GetQuestionsForPrint (user in varchar2)
RETURN MYPACKAGE.refcur_question
AS
OUTPUT MYPACKAGE.refcur_question;
BEGIN
MYPACKAGE.GETQUESTIONS(p_OUTPUT => OUTPUT,
p_USER=> USER ) ;
RETURN OUTPUT;
END;
and here's what I do to execute it in SQL Developer
var r refcursor;
exec :r := mypackage.getquestionsForPrint('OMG Ponies');
print r;
So from now on I'm probably going to add the ForPrint functions to all my procedures.
This got me thinking, maybe functions are what I want and I don't need procedures.
To test this I tried executing the function from .NET, except I can't do it. Is this really the way it is.
using (OracleConnection cnn = new OracleConnection("Data Source=Test;User Id=Test;Password=Test;"))
{
cnn.Open();
OracleCommand cmd = new OracleCommand("mypackage.getquestionsForPrint");
cmd.CommandType = System.Data.CommandType.StoredProcedure;
cmd.Parameters.Add ( "p_USER", "OMG Ponies");
cmd.Connection = cnn;
OracleDataReader rdr = cmd.ExecuteReader();
while (rdr.Read())
{
Console.WriteLine(rdr.GetOracleValue(0));
}
Console.ReadLine();
}
So I get the error.
getquestionsForPrint is not a procedure or is undefined
I tried ExecuteScalar as well with the same result.
EDIT Taking Slider345's advice I've also tried setting the command type to text and using the following statement and I get
invalid SQL statement
mypackage.getquestionsForPrint('OMG Poinies');
and
var r refcursor; exec :r := mypackage.getquestionsForPrint('OMG Poinies');
Using Abhi's variation for the command text
select mypackage.getquestionsForPrint('OMG Poinies') from dual
resulted in
The instruction at "0x61c4aca5"
referenced memory at "0x00000ce1". The
memory could not be "read".
Am I just barking up the wrong tree?
Update
Attempting to add an output parameter doesn't help.
cmd.Parameters.Add(null, OracleDbType.RefCursor, ParameterDirection.Output);
Not sure what the name should be since its the return value of a function (I've tried null, empty string, mypackage.getquestionsForPrint) but in all cases it just results in
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of
arguments in call to
'getquestionsForPrint'
Final Edit (hopefully)
Apparently Guddie asked a similar question 3 months after I did. He got the answer which is to
Set your command text to an anonymous block
Bind a parameter to the ref cursor setting the direction to output
Call Execute non reader.
Then use your parameter
using (OracleConnection cnn = new OracleConnection("Data Source=Test;User Id=Test;Password=Test;"))
{
cnn.Open();
OracleCommand cmd = new OracleCommand("mypackage.getquestionsForPrint");
cmd.CommandType = CommandType.Text;
cmd.CommandText = "begin " +
" :refcursor1 := mypackage.getquestionsForPrint('OMG Ponies') ;" +
"end;";
cmd.Connection = cnn;
OracleDataAdapter da = new OracleDataAdapter(cmd);
cmd.ExecuteNonQuery();
Oracle.DataAccess.Types.OracleRefCursor t = (Oracle.DataAccess.Types.OracleRefCursor)cmd.Parameters[0].Value;
OracleDataReader rdr = t.GetDataReader();
while(rdr.Read())
Console.WriteLine(rdr.GetOracleValue(0));
Console.ReadLine();
}
I have not tested this with a function, but for my stored procedures. I specify the out parameter for the refCursor.
command.Parameters.Add(new OracleParameter("refcur_questions", OracleDbType.RefCursor, ParameterDirection.Output));
If you are able to get the function to work with the CommandType.Text. I wonder if you can try adding the parameter above except with the direction as:
ParameterDirection.ReturnValue
I am using Oracle.DataAccess version 2.111.6.0
I had to go up and down between the question and answers to figure out the full code that works. So I am giving the full code here that worked for me for others -
var sql = #"BEGIN :refcursor1 := mypackage.myfunction(:param1) ; end;";
using(OracleConnection con = new OracleConnection("<connection string>"))
using(OracleCommand com = new OracleCommand())
{
com.Connection = con;
con.Open();
com.Parameters.Add(":refcursor1", OracleDbType.RefCursor, ParameterDirection.Output);
com.Parameters.Add(":param1", "param");
com.CommandText = sql;
com.CommandType = CommandType.Text;
com.ExecuteNonQuery();
OracleRefCursor curr = (OracleRefCursor)com.Parameters[0].Value;
using(OracleDataReader dr = curr.GetDataReader())
{
if(dr.Read())
{
var value1 = dr.GetString(0);
var value2 = dr.GetString(1);
}
}
}
Hope it helps.
I know this is quite an old post, but since it took me so long to figure out all of the minutia involved in getting .NET to "fight nice" with Oracle, I figured I'd put this advice out there for anyone else in this sticky situation.
I frequently call Oracle stored procedures that return a REF_CURSOR in our environment (.NET 3.5 against Oracle 11g). For a function, you can indeed name the parameter anything you'd like, but then you need to set its System.Data.ParameterDirection = ParameterDirection.ReturnValue then ExecuteNonQuery against the OracleCommand object. At that point the value of that parameter will be the ref_cursor that the Oracle function returned. Just cast the value as an OracleDataReader and loop through the OracleDataReader.
I'd post the full code, but I wrote the data access layer in VB.NET years ago, and the bulk of the code consuming the data access layer (our corporate intranet) is in C#. I figured mixing languages in a single response would be the larger faux pas.