We Keep Coding

calculate the difference between two UTC times in hours C#

How do I calculate the difference between two UTC times in hours?
This is what I have tried:
// var lastSuccessfulRunTime = 2023-01-01T00:00:00Z UTC Time
int timeDifference = (DateTime.UtcNow - lastSuccessfulRunTime).Hours
if (DateTime.UtcNow - lastSuccessfulRunTime) = 9.00:00:00.7944388, timeDifference will be 0 which is not what I need.

The Hours property returns the integer hours value of the timespace.
i.e. for an hour and a half, it would give you 1.
The TotalHours property, converts the entire timespan into the double representation.
i.e. for an hour and a half, it would give you 1.5
You want:
double timeDifference = (DateTime.UtcNow - lastSuccessfulRunTime).TotalHours
(note, your int variable type is also wrong)
This applies to all of the time-component properties on a DateTime

Calculate number of milliseconds until next occurence of a time

I feel like this is something really simple, but my Google Fu is letting me down as I keep finding difference calculations.
I have a time (e.g. 1800 hours) stored in a DateTime object. The date is null and immaterial. All I want to know is how many milliseconds until the NEXT occurrence of that time.
So, if I run the calculation at 0600 - it will return 12 hours (in ms). At 1750, it will return ten minutes (in ms) and at 1900 it will return 24 hours (in ms).
All the things I can find show me how to calculate differences, which doesn't work once you're past the time.
Here is what I tried, but fails once you're past the time and gives negative values:
DateTime nowTime = DateTime.Now;
TimeSpan difference = _shutdownTime.TimeOfDay - nowTime.TimeOfDay;
double result = difference.TotalMilliseconds;

You're already doing everything you should, except for one thing: handling negative results.
If the result is negative, it means the time you want to calculate the duration until has already passed, and then you want it to mean "tomorrow" instead, and get a positive value.
In this case, simply add 24 hours:
DateTime nowTime = DateTime.Now;
TimeSpan difference = _shutdownTime.TimeOfDay - nowTime.TimeOfDay;
double result = difference.TotalMilliseconds;
if (result < 0)
result += TimeSpan.FromHours(24).TotalMilliseconds;
The next thing to consider is this: If the time you want to calculate the duration until is 19:00 hours, and the current time is exactly 19:00 hours, do you want it to return 0 (zero) or 24 hours worth of time? Meaning, do you really want the next such occurrence?
If so, then change the above if-statement to use <=:
DateTime nowTime = DateTime.Now;
TimeSpan difference = _shutdownTime.TimeOfDay - nowTime.TimeOfDay;
double result = difference.TotalMilliseconds;
if (result <= 0)
result += TimeSpan.FromHours(24).TotalMilliseconds;
However, note that this will be prone to the usual problems with floating point values. If the current time is 18:59:59.9999999, do you still want it to return the current time (a minuscule portion of time) until 19:00 today, or do you want it to flip to tomorrow? If so, change the comparison to be slightly different:
DateTime nowTime = DateTime.Now;
TimeSpan difference = _shutdownTime.TimeOfDay - nowTime.TimeOfDay;
double result = difference.TotalMilliseconds;
if (result <= -0.0001)
result += TimeSpan.FromHours(24).TotalMilliseconds;
where -0.0001 is a value that corresponds to "the range of inaccuracy you're prepared to accept being tomorrow instead of today in terms of milliseconds".

When doing calculations like this it is important to take possible DST changes under consideration so that your results remain correct.
Suppose your operational parameters are:
var shutdownTime = TimeSpan.FromHours(18);
// just to illustrate, in Europe there is a DST change on 2013-10-27
// normally you 'd just use DateTime.Now here
var now = new DateTime(2013, 10, 26, 20, 00, 00);
// do your calculations in local time
var nextShutdown = now.Date + shutdownTime;
if (nextShutdown < now) {
nextShutdown = nextShutdown.AddDays(1);
}
// when you want to calculate time spans in absolute time
// (vs. wall clock time) always convert to UTC first
var remaining = nextShutdown.ToUniversalTime() - now.ToUniversalTime();
Console.WriteLine(remaining);
The answer to your question would now be remaining.TotalMilliseconds.

Converting a double to a time that makes sense

Basically I am setting a limit of hours a user can use. Now every time a button is press, whatever time that person accrued gets taken away from this total value.
However because a limit would be represented as say 156 hours, and the datetime representation of 5 minutes would be 00.05 the result would be 155.95, rather than 155.55 .
I work this out like so
string date2 = TotalMonthlyHours.ToString("HH.mm");
double date = double.Parse(date2);
RunningTotal = date + RunningTotal;
Total = limit - RunningTotal;
Any ideas?

I think you are trying to represent 5 minutes as 0.05. The way to do that is to first of all obtain the minutes as an integer. And then simply convert to double.
double floatmins = minutes/100.0;
And you convert in the other direction like this:
int minutes = (int) (floatmins*100.0);
However, I urge you not to go any further with this. You cannot expect to perform arithmetic on a quantity like that. What is the result of 2.20-1.50? You and I know it's 30 minutes, but the computer says 0.70 which is no use at all.
Store the hours using a true fractional representation. So 5 minutes is 5/60.0. Or store the total minutes in an integer. Or total seconds in an integer. Or a TimeSpan.
The key is that you can write your own helper routines to convert from a sane storage format to a value that is human readable. But you must store the raw data in a representation that will admit arithmetic operations.

I think I worked it out by doing something like this
string[] times = date.ToString().Split('.');
if (date != 0.0)
{
string minutesString = times[1];
string hoursString = times[0];
double minutes = Convert.ToDouble(minutesString);
double hours = Convert.ToDouble(hoursString);
// end of splitting
TimeSpan Limit = TimeSpan.FromHours(limit);
TimeSpan Hours = TimeSpan.FromHours((int)hours);
TimeSpan Minutes = TimeSpan.FromMinutes((int)minutes);
TimeSpan SubTotal = Hours + Minutes;
Time = Limit - SubTotal;
}
Edit: Glad you came up with the same as me,Just read your reply David, let's hope it works

I would convert it to minutes first than add as minutes to the date
var min = Convert.ToDouble(Convert.ToDecimal(textbox.Text) * 60);
DateTimePickerEnd.DbSelectedDate = e.NewDate.Value.AddMinutes(min);

How to convert year, month and day to ticks without using DateTime

long ticks = new DateTime(2012, 1, 31).ToLocalTime().Ticks; // 634635684000000000
But how to do this without DateTime constructor ?
edit
What I actually want is to keep only the years, months and days from the ticks.
long ALL_Ticks = DateTime.Now.Ticks; // 634636033446495283
long Only_YearMonthDay = 634635684000000000; // how to do this ?
I want to use this in a linq-sql query using Linq.Translations.

If you only want the ticks for the date portion of the current datetime you could use:
long Only_YearMonthDay = DateTime.Now.Date.Ticks; //634635648000000000
//DateTime.Now.Date.Ticks + DateTime.Now.TimeOfDay.Ticks == DateTime.Now.Ticks

You could find out how many days are in the calculation and then multiply by 864,000,000,000 (which is how many ticks are in a day). Is that what you are looking for? Bit of documentation here : http://msdn.microsoft.com/en-us/library/system.timespan.ticksperday.aspx.
Happy coding,
Cheers,
Chris.
OK - didn't think this through properly! Ticks represent the amount of 100 nanosecond intervals since 12:00:00 midnight, January 1, 0001. You would need to calculate how many days have passed since that date and then multiply it by the ticks per day value!
If I understand you right, you are not worried about the ticks up to a particular time of the day?! So, it would be something along the lines of :
var ticksToDate = (DateTime.UtcNow - DateTime.MinValue).Days * 864000000000;
Does that answer your question??

That is going to be rather difficult unless you have some other way of getting the current date and time. According to MSDN:
A single tick represents one hundred nanoseconds or one ten-millionth of a second. There are 10,000 ticks in a millisecond.
The value of this property represents the number of 100-nanosecond intervals that have elapsed since 12:00:00 midnight, January 1, 0001, which represents DateTime.MinValue. It does not include the number of ticks that are attributable to leap seconds.
Now, if you know the current date and time, you can calculate how many days have passed since January 1, 0001 and use that to calculate the number of ticks.

I understand you dont want the hour parts of the date. If you use Date, then you only get the day (for example: 01/01/2012 00:00:00)
long ticks = new DateTime(2012, 1, 31).Date.Ticks;
And with any DateTime object already created is the same of course.
long ticks = dateObject.Date.Ticks;

You already have the answer there in your post:
long ALL_Ticks = DateTime.Now.Ticks;
// that's the ticks (from DateTime.MinValue) until 'now' (this very moment)
long ticks = new DateTime(2012, 1, 31).ToLocalTime().Ticks;
// or
long ticks = DateTime.Now.Date.Ticks;
// that's the ticks until the beginning of today
long yearmonthticks = new DateTime(2012, 1, 1).ToLocalTime().Ticks;
// that's the ticks until the beginning of the month
// etc..., the rest is simple subtractions
Since your question doesn't specify any reason not to use the DateTime constructor, this is the best solution for what seems like your problem.

I had a use case where I couldn't use DateTime but needed Years/Months from Ticks.
I used the source behind DateTime to figure out how. To go the other way you can look at the constructor, one of which calls the following code.
private static long DateToTicks(int year, int month, int day) {
if (year >= 1 && year <= 9999 && month >= 1 && month <= 12) {
int[] days = IsLeapYear(year)? DaysToMonth366: DaysToMonth365;
if (day >= 1 && day <= days[month] - days[month - 1]) {
int y = year - 1;
int n = y * 365 + y / 4 - y / 100 + y / 400 + days[month - 1] + day - 1;
return n * TicksPerDay;
}
}
throw new ArgumentOutOfRangeException(null, Environment.GetResourceString("ArgumentOutOfRange_BadYearMonthDay"));
}
This can be found in link below, of course you will need to re-write to suit your needs and look up the constants and IsLeapYear function too.
https://referencesource.microsoft.com/#mscorlib/system/datetime.cs,602

Convert DateTime.Now to Seconds

I am trying to write a function that will convert a DateTime.Now instance to the number of seconds it represents so that I can compare that to another DateTime instance. Here is what I currently have:
public static int convertDateTimeToSeconds(DateTime dateTimeToConvert)
{
int secsInAMin = 60;
int secsInAnHour = 60 * secsInAMin;
int secsInADay = 24 * secsInAnHour;
double secsInAYear = (int)365.25 * secsInADay;
int totalSeconds = (int)(dateTimeToConvert.Year * secsInAYear) +
(dateTimeToConvert.DayOfYear * secsInADay) +
(dateTimeToConvert.Hour * secsInAnHour) +
(dateTimeToConvert.Minute * secsInAMin) +
dateTimeToConvert.Second;
return totalSeconds;
}
I realize that I am truncating the calculation for seconds in a year, but I don't need my calculation to be precise. I'm really looking to know if the method that I am using to calculate seconds is correct.
Does anyone have anything that could better compute seconds given from a DateTime object?
Also, Should the return type be int64 if I am coding in C# if I am going to calculate all the seconds since 0 AD?

The DateTime type supports comparison operators:
if (dateTimeA > dateTimeB)
{
...
This also works for DateTime values returned by DateTime.AddSeconds:
if (dateTimeA.AddSeconds(42) > dateTimeB)
{
...
If you really want the number of seconds that elapsed since 01/01/0001 00:00:00, you can calculate the difference between the two DateTime values. The resulting TimeSpan value has a TotalSeconds property:
double result = DateTime.Now.Subtract(DateTime.MinValue).TotalSeconds;

It really doesn't make sense to convert a DateTime object to seconds. Seconds only make sense if you are dealing with a length of time (TimeSpan). Should you want to compare two dates to get the number of seconds between them:
TimeSpan diff = DateTime.Now - PreviousDateTime;
double seconds = diff.TotalSeconds;

If the purpose is finding the number of seconds between two dates, you'd be much better off using the TimeSpan object.
TimeSpan span = date2 - date1;
double seconds = span.TotalSeconds;

See suggestion from thread below:
How do I convert ticks to minutes?
TimeSpan.FromTicks(DateTime.Now.Ticks).TotalSeconds;

Assuming you really need to get at the seconds for the datetime object, you could directly get the "Ticks" property from it. These aren't in seconds but you can easily divide by the proper factor to convert the Ticks to seconds.
See: http://msdn.microsoft.com/en-us/library/system.datetime.ticks.aspx
So, something like:
DateTime.Now.Ticks/TimeSpan.TicksPerSecond

If you want to compare 2 DateTime object, why just not use the provided operators?
http://msdn.microsoft.com/en-us/library/aa326723%28v=VS.71%29.aspx
DateTime a, b;
if (a > b) //a is after b

I would use the TimeSpan class to get the exact difference between two DateTime instances. Here is an example:
DateTime dt1 = DateTime.Now;
DateTime dt2 = new DateTime(2003,4,15);
TimeSpan ts = dt1.Subtract(dt2);
Once the TimeSpan value (ts, in the code snippet above) is available, you can examine its values to correctly convert the TimeSpan to a given number of seconds.

Using a TimeSpan to get the elapsed time between two DateTimes is probably the best way to go but if you really want to get the number of seconds for a given DateTime you could do something like the following:
DateTime dateTimeToConvert = DateTime.Now;
TimeSpan tsElapsed = dateTimeToConvert - DateTime.MinValue;
return tsElapsed.TotalSeconds;
Note that tsElapsed.TotalSeconds is a Double, not an Int.

Do note that the goal is to get the number of seconds since DateTime.MinVal (the first day of the calendar). I say this, because I see all of these answers for "you do time comparisons like this... add in the object, multiply by that object and do cross-calculus on them, divide by the quotient of the summed result, and Boom! not what you asked."
There's a really simple answer here. Ticks are 100-nanosecond increments. DateTime object.Ticks is the number of ticks that have occurred since 1/1/0001. Ie, year zero. There are 10 million nanoseconds in a second. so...
public static long convertDateTimeToSeconds(DateTime dateTimeToConvert) {
// According to Wikipedia, there are 10,000,000 ticks in a second, and Now.Ticks is the span since 1/1/0001.
long NumSeconds= dateTimeToConvert.Ticks / 10000000;
return NumSeconds;
}