Related
I have an application, which is to repeat the numbers what I hear then record the digits what I read. The numbers are 0,1,2,3,4,5,6,7,8,9. I use a for loop to play these numbers with a text to speech skill, which is from a third party.
For the recording part, I have to put it in a separate thread by the third party requirement. To record the voice, the method is likely:
recordVoiceResource.Record(fileName);
To stop it, use:
recordVoiceResource.Stop();
Now I find sometimes my recording is 0 second, which means the code perhaps doesn't reach Record line. Sometimes it only has 2 seconds. I believe the thread schedule is wrong.
private ManualResetEvent terminate = new ManualResetEvent(false);
PlayTTS("Please repeat the following numbers as you hear them.");
Thread t = new Thread(() => RecordNumbers());
t.Start();
Thread.Sleep(2000);
terminate.Set();
terminate.WaitOne();
PlayNumbers();
recordVoiceResource.Stop();
The thread method is:
private void RecordNumbers()
{
recordVoiceResource = TelephonyServer.GetVoiceResource();
recordVoiceResource.MaximumSilence = 1;
recordVoiceResource.MaximumTime = 30;
// Start recording what I read from I heard
recordVoiceResource.Record(fileName);
}
To playNumbers,
private void PlayNumbers()
{
foreach (var item in numbers)
{
try
{
vr.PlayTTS(item.ToString()); // will be 0,1,2,...9
Thread.Sleep(2000);
}
According to your comment, the property MaximumSilence gets or sets the maximum silence in seconds that will be allowed until termination of the next voice function. You are setting it to one second, starting the recording, and then sleeping for two seconds before beginning playback that prompts the user to say something. Do you see the problem here? Assuming the mic doesn't pick up some unrelated speech during that period, the recording will stop before the playback even begins.
Since there is a 2-second gap between number playback, you probably need to set MaximumSilence to several seconds.
That is, of course, assuming your intention was to capture a single recording of the user speaking all the numbers (which is how your code is written). If you want to capture the spoken numbers individually, then you may need to schedule and synchronize separate recordings as each number is played back. You may want to double-check the API to make sure your solution is what you intended.
It is very likely your problem is causing due to Thread.Sleep(). Use a timer instead:
System.Timers.Timer Record = new System.Timers.Timer();
Record.Interval = 2000;
Record.Elapsed += new System.Timers.ElapsedEventHandler(Record_Elapsed);
void Record_Elapsed(object sender, System.Timers.ElapsedEventArgs e)
{
Record.Enabled=false;
PlayNumbers();
recordVoiceResource.Stop();
}
And set:
Thread t = new Thread(() => RecordNumbers());
t.Start();
Record.Enabled=true;
Developing a C# .NET 2.0 WinForm Application. Need the application to close and restart itself.
Application.Restart();
The above method has proven to be unreliable.
What is a better way to restart the application?
A much simpler approach that worked for me is:
Application.Restart();
Environment.Exit(0);
This preserves the command-line arguments and works despite event handlers that would normally prevent the application from closing.
The Restart() call tries to exit, starts a new instance anyway and returns. The Exit() call then terminates the process without giving any event handlers a chance to run. There is a very brief period in which both processes are running, which is not a problem in my case, but maybe in other cases.
The exit code 0 in Environment.Exit(0); specifies a clean shutdown. You can also exit with 1 to specify an error occurred.
If you are in main app form try to use
System.Diagnostics.Process.Start( Application.ExecutablePath); // to start new instance of application
this.Close(); //to turn off current app
Unfortunately you can't use Process.Start() to start an instance of the currently running process. According to the Process.Start() docs:
"If the process is already running, no additional process resource is started..."
This technique will work fine under the VS debugger (because VS does some kind of magic that causes Process.Start to think the process is not already running), but will fail when not run under the debugger. (Note that this may be OS-specific - I seem to remember that in some of my testing, it worked on either XP or Vista, but I may just be remembering running it under the debugger.)
This technique is exactly the one used by the last programmer on the project on which I'm currently working, and I've been trying to find a workaround for this for quite some time. So far, I've only found one solution, and it just feels dirty and kludgy to me: start a 2nd application, that waits in the background for the first application to terminate, then re-launches the 1st application. I'm sure it would work, but, yuck.
Edit: Using a 2nd application works. All I did in the second app was:
static void RestartApp(int pid, string applicationName )
{
// Wait for the process to terminate
Process process = null;
try
{
process = Process.GetProcessById(pid);
process.WaitForExit(1000);
}
catch (ArgumentException ex)
{
// ArgumentException to indicate that the
// process doesn't exist? LAME!!
}
Process.Start(applicationName, "");
}
(This is a very simplified example. The real code has lots of sanity checking, error handling, etc)
I might be late to the party but here is my simple solution and it works like a charm with every application I have:
try
{
//run the program again and close this one
Process.Start(Application.StartupPath + "\\blabla.exe");
//or you can use Application.ExecutablePath
//close this one
Process.GetCurrentProcess().Kill();
}
catch
{ }
I had the same exact problem and I too had a requirement to prevent duplicate instances - I propose an alternative solution to the one HiredMind is proposing (which will work fine).
What I am doing is starting the new process with the processId of the old process (the one that triggers the restart) as a cmd line argument:
// Shut down the current app instance.
Application.Exit();
// Restart the app passing "/restart [processId]" as cmd line args
Process.Start(Application.ExecutablePath, "/restart" + Process.GetCurrentProcess().Id);
Then when the new app starts I first parse the cm line args and check if the restart flag is there with a processId, then wait for that process to Exit:
if (_isRestart)
{
try
{
// get old process and wait UP TO 5 secs then give up!
Process oldProcess = Process.GetProcessById(_restartProcessId);
oldProcess.WaitForExit(5000);
}
catch (Exception ex)
{
// the process did not exist - probably already closed!
//TODO: --> LOG
}
}
I am obviously not showing all the safety checks that I have in place etc.
Even if not ideal - I find this a valid alternative so that you don't have to have in place a separate app just to handle restart.
Start/Exit Method
// Get the parameters/arguments passed to program if any
string arguments = string.Empty;
string[] args = Environment.GetCommandLineArgs();
for (int i = 1; i < args.Length; i++) // args[0] is always exe path/filename
arguments += args[i] + " ";
// Restart current application, with same arguments/parameters
Application.Exit();
System.Diagnostics.Process.Start(Application.ExecutablePath, arguments);
This seems to work better than Application.Restart();
Not sure how this handles if your program protects against multiple instance. My guess is you would be better off launching a second .exe which pauses and then starts your main application for you.
It's simple, you just need to call the Application.Restart() method, this will invoke your application to be restarted. You must also exit from the local environment with an error code:
Application.Restart();
Environment.Exit(int errorcode);
You can create an enumeration of error codes so that you application will exit efficeintly.
Another method is to just exit from the application and start the process using the executable path:
Application.Exit();
System.Diagnostics.Process.Start(Application.ExecutablePath);
Try this code:
bool appNotRestarted = true;
This code must also be in the function:
if (appNotRestarted == true) {
appNotRestarted = false;
Application.Restart();
Application.ExitThread();
}
I figured an another solution out, perhaps anyone can use it, too.
string batchContent = "/c \"#ECHO OFF & timeout /t 6 > nul & start \"\" \"$[APPPATH]$\" & exit\"";
batchContent = batchContent.Replace("$[APPPATH]$", Application.ExecutablePath);
Process.Start("cmd", batchContent);
Application.Exit();
Code is simplified so take care of Exceptions and stuff ;)
I fear that restarting the entire application using Process is approaching your problem in the wrong way.
An easier way is to modify the Program.cs file to restart:
static bool restart = true; // A variable that is accessible from program
static int restartCount = 0; // Count the number of restarts
static int maxRestarts = 3; // Maximum restarts before quitting the program
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
while (restart && restartCount < maxRestarts)
{
restart = false; // if you like.. the program can set it to true again
restartCount++; // mark another restart,
// if you want to limit the number of restarts
// this is useful if your program is crashing on
// startup and cannot close normally as it will avoid
// a potential infinite loop
try {
Application.Run(new YourMainForm());
}
catch { // Application has crashed
restart = true;
}
}
}
You are forgetting the command-line options/parameters that were passed in to your currently running instance. If you don't pass those in, you are not doing a real restart. Set the Process.StartInfo with a clone of your process' parameters, then do a start.
For example, if your process was started as myexe -f -nosplash myfile.txt, your method would only execute myexe without all those flags and parameters.
I wanted the new application start up after the old one shuts down.
Using process.WaitForExit() to wait for your own process to shutdown makes no sense. It will always time out.
So, my approach is to use Application.Exit() then wait, but allow events to be processed, for a period of time. Then start a new application with the same arguments as the old.
static void restartApp() {
string commandLineArgs = getCommandLineArgs();
string exePath = Application.ExecutablePath;
try {
Application.Exit();
wait_allowingEvents( 1000 );
} catch( ArgumentException ex ) {
throw;
}
Process.Start( exePath, commandLineArgs );
}
static string getCommandLineArgs() {
Queue<string> args = new Queue<string>( Environment.GetCommandLineArgs() );
args.Dequeue(); // args[0] is always exe path/filename
return string.Join( " ", args.ToArray() );
}
static void wait_allowingEvents( int durationMS ) {
DateTime start = DateTime.Now;
do {
Application.DoEvents();
} while( start.Subtract( DateTime.Now ).TotalMilliseconds > durationMS );
}
You could also use Restarter.
Restarter is an application that automatically monitor and restarts crashed or hung programs and applications. It was originally developed to monitor and restart game servers, but it will do the job for any console or form based program or application
public static void appReloader()
{
//Start a new instance of the current program
Process.Start(Application.ExecutablePath);
//close the current application process
Process.GetCurrentProcess().Kill();
}
Application.ExecutablePath returns your aplication .exe file path
Please follow the order of calls. You might want to place it in a try-catch clause.
The problem of using Application.Restart() is, that it starts a new process but the "old" one is still remaining. Therefor I decided to Kill the old process by using the following code snippet:
if(Condition){
Application.Restart();
Process.GetCurrentProcess().Kill();
}
And it works proper good. In my case MATLAB and a C# Application are sharing the same SQLite database. If MATLAB is using the database, the Form-App should restart (+Countdown) again, until MATLAB reset its busy bit in the database. (Just for side information)
How about create a bat file, run the batch file before closing, and then close the current instance.
The batch file does this:
wait in a loop to check whether the process has exited.
start the process.
Here's my 2 cents:
The sequence Start New Instance->Close Current Instance should work even for the applications that don't allow running multiple copies simultaneously as in this case the new instance may be passed a command-line argument which will indicate that there is a restart in progress so checking for other instances running will not be necessary. Waiting for the first instance to actually finish my be implemented too if it's absolutely imperative that no two intstances are running in parallel.
Application.Restart();
Environment.Exit(0);
I had a similar problem, but mine was related to unmanageable memory leak that I couldn't find on an app that has to run 24/7. With the customer I agreed that safe time to restart the app was 03:00AM if the memory consumption was over the defined value.
I tried Application.Restart, but since it seems to use some mechanism that starts new instance while it is already running, I went for another scheme. I used the trick that file system handles persist until process that created them dies. So, from The Application, i dropped the file to the disk, and didn't Dispose() the handle. I used the file to send 'myself' executable and starting directory also (to add flexibility).
Code:
_restartInProgress = true;
string dropFilename = Path.Combine(Application.StartupPath, "restart.dat");
StreamWriter sw = new StreamWriter(new FileStream(dropFilename, FileMode.Create, FileAccess.ReadWrite, FileShare.ReadWrite));
sw.WriteLine(Application.ExecutablePath);
sw.WriteLine(Application.StartupPath);
sw.Flush();
Process.Start(new ProcessStartInfo
{
FileName = Path.Combine(Application.StartupPath, "VideoPhill.Restarter.exe"),
WorkingDirectory = Application.StartupPath,
Arguments = string.Format("\"{0}\"", dropFilename)
});
Close();
Close() at the end would initiate app shutdown, and file handle I used for StreamWriter here would be held open until process really dies. Then...
Restarter.exe comes into action. It TRIES to read the file in exclusive mode, preventing it to gain access until main app wasn't dead, then starts main app, deletes the file and exists. I guess that it can't be simpler:
static void Main(string[] args)
{
string filename = args[0];
DateTime start = DateTime.Now;
bool done = false;
while ((DateTime.Now - start).TotalSeconds < 30 && !done)
{
try
{
StreamReader sr = new StreamReader(new FileStream(filename, FileMode.Open, FileAccess.ReadWrite, FileShare.ReadWrite));
string[] runData = new string[2];
runData[0] = sr.ReadLine();
runData[1] = sr.ReadLine();
Thread.Sleep(1000);
Process.Start(new ProcessStartInfo { FileName = runData[0], WorkingDirectory = runData[1] });
sr.Dispose();
File.Delete(filename);
done = true;
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
Thread.Sleep(1000);
}
}
I use the following and it does exactly what you are looking for:
ApplicationDeployment ad = ApplicationDeployment.CurrentDeployment;
UpdateCheckInfo info = null;
info = ad.CheckForDetailedUpdate();
if (info.IsUpdateRequired)
{
ad.UpdateAsync(); // I like the update dialog
MessageBox.Show("Application was upgraded and will now restart.");
Environment.Exit(0);
}
for using As logout you need to terminate all app from Ram Cache
so close The Application first and then Rerun it
//on clicking Logout Button
foreach(Form frm in Application.OpenForms.Cast<Form>().ToList())
{
frm.Close();
}
System.Diagnostics.Process.Start(Application.ExecutablePath);
You could enclose your code inside a function and when restart is needed you can just call the function.
Take for instance an application that:
While application is not registered; (upon start) the application should prompt the user to register the application and create a login account.
Once registration is submitted and login credentials are created; the application should restart, check for registration and prompt the user to login with the inserted credentials (so the user can access to all the application features).
Problem:
By building and launching the application from Visual Studio; any of the 4 alternatives bellow will fail to accomplish the tasks required.
/*
* Note(s):
* Take into consideration that the lines bellow don't represent a code block.
* They are just a representation of possibilities,
* that can be used to restart the application.
*/
Application.Restart();
Application.Exit();
Environment.Exit(int errorCode);
Process.GetCurrentProcess().Kill();
What happens is: After creating the Registration, Login and calling Application.Restart(); the application will (strangely) reopen the Registration Form and skip data in a Database (even though the resource is set to "Copy if Newer").
Solution:
Batch Building the application was (for me) a proof that any of the lines above were actually working as expected.
Just not when building and running the application with Visual Studio.
In first place I'd try batch building the application; run it outside Visual Studio and check if Application.Restart() actually works as expected.
Also Check further Info regarding this thread subject:
How do I restart my C# WinForm Application?
I've found a new way that's pretty convenient and has quite a few upsides.
There's never more than one instance running.
Command line args are persisted.
No exit events are raised from the application.
No process handles are broken.
I had a third party application managing my application with Process.Start and using Exit event to reload the application. Many of these solutions would break this implementation which is how I ended up on the following solution.
public static CancellationTokenSource _restartTokenSource;
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main(string[] args)
{
// To customize application configuration such as set high DPI settings or default font,
// see https://aka.ms/applicationconfiguration.
ApplicationConfiguration.Initialize();
while (_restartTokenSource == null || _restartTokenSource.IsCancellationRequested)
{
_restartTokenSource = new System.Threading.CancellationTokenSource();
_restartTokenSource.Token.Register(() =>
{
foreach (Form form in Application.OpenForms)
form.Close();
});
Application.Run(new FlashMain(args));
}
}
Since Application.Run blocks until all forms in the application are closed I put this portion of the initialization into a loop that only executes when a CancellationTokenSource is null (the first run) or IsCancellationRequested is true (restart requested).
I register an event on the CancellationTokenSource that closes all forms in the application when .Cancel() is called, therefore unblocking Application.Run and restarting the loop.
Call Program._restartTokenSource.Cancel(); anywhere in the application to restart it.
P.S. This also works great for injecting into a BlazorWebView to restart the application from .NET Core.
I would like to know how to run a c# program in background every five minute increments. The code below is not what I would like to run as a background process but would like to find out the best possible method to do this using this code so that I can implement it on another code. so this process should run after a five minute increment. I know I could use threads to do so, but dont really now how to implement this. I know this is the best way How to run a console application on system Startup , without appearing it on display(background process)? this to run in the background, but how would I have the code running in five minute increments
class Program
{
static void Main(string[] args)
{
Console.Write("hellow world");
Console.ReadLine();
}
}
This app should run continuously, putting out a message every 5 minutes.
Isn't that what you want?
class Program
{
static void Main(string[] args)
{
while (true) {
Console.Write("hellow world");
System.Threading.Thread.Sleep(1000 * 60 * 5); // Sleep for 5 minutes
}
}
}
Why not just use Windows Task Scheduler?
Set it to run your app at the desired interval. It's perfect for this sort of job and you don't have to mess about with forcing threads to sleep which can create more problems that it solves.
How about using a System.Windows.Threading.DispatcherTimer?
class Program
{
static void Main(string[] args)
{
DispatcherTimer timer = new DispatcherTimer();
timer.Interval = new TimeSpan(0, 5, 0); // sets it to 5 minutes
timer.Tick += new EventHandler(timer_Tick);
timer.Start();
}
static void timer_Tick(object sender, EventArgs e)
{
// whatever you want to happen every 5 minutes
}
}
Probably the simplest way to "fire" a new process every X minutes is to use Windows Task Scheduler.
You could of course do something similar programmatically, e.g. create your own service, that starts the console application every X minutes.
All this under assumption you actually want to close the application before the next iteration. Alternatively, you might just keep it active the whole time. You might use one of the timer classes to fire events periodically, or even a Thread.Sleep in a very simplified scenario....
I have a windows service that polls an Oracle database at a given interval and, based on some criteria, updates several fields. To do this it opens a cursor and iterates through the rows to update.
protected override void OnStart(string[] args)
{
TimerCallback timerDelegate = new TimerCallback(DoStuff);
serviceTimer = new Timer(timerDelegate, null, 0, 20000);
}
private void DoStuff(object state)
{
// Set-up connectionsString and sqlQuery
using (OracleConnection oraConnect = new OracleConnection(connectionString))
{
oraConnect.Open();
using (OracleCommand oraCommand = new OracleCommand(sqlQuery, oraConnect))
using (OracleDataReader oraReader = oraCommand.ExecuteReader())
{
while (oraReader.Read())
{
// Do some processing here – may take some time
// Update database here
}
}
}
My question is, say for example the timer interval is 20 seconds (as above). What happens if the cursor takes 30 seconds to iterate through? I realise that each timer will work in a separate thread, but given that a new database connection is established each time, will the second call see the changes made by the first?
The second process will only see changes committed by the first. If the second process starts before the first commits, then it will not see the changes made by the first.
The assumption made is that one commit is performed in your process. If you are performing a commit after each update, then all bets are off. Your second process will see some of the updates performed by the first, but not all - only those committed when the cursor is opened in the second process.
If you scare that the cursor takes more than 20seconds, you can stop your timer before processes, and then re-start timer after process completed. Is it possible for you to stop timer before process?
Developing a C# .NET 2.0 WinForm Application. Need the application to close and restart itself.
Application.Restart();
The above method has proven to be unreliable.
What is a better way to restart the application?
A much simpler approach that worked for me is:
Application.Restart();
Environment.Exit(0);
This preserves the command-line arguments and works despite event handlers that would normally prevent the application from closing.
The Restart() call tries to exit, starts a new instance anyway and returns. The Exit() call then terminates the process without giving any event handlers a chance to run. There is a very brief period in which both processes are running, which is not a problem in my case, but maybe in other cases.
The exit code 0 in Environment.Exit(0); specifies a clean shutdown. You can also exit with 1 to specify an error occurred.
If you are in main app form try to use
System.Diagnostics.Process.Start( Application.ExecutablePath); // to start new instance of application
this.Close(); //to turn off current app
Unfortunately you can't use Process.Start() to start an instance of the currently running process. According to the Process.Start() docs:
"If the process is already running, no additional process resource is started..."
This technique will work fine under the VS debugger (because VS does some kind of magic that causes Process.Start to think the process is not already running), but will fail when not run under the debugger. (Note that this may be OS-specific - I seem to remember that in some of my testing, it worked on either XP or Vista, but I may just be remembering running it under the debugger.)
This technique is exactly the one used by the last programmer on the project on which I'm currently working, and I've been trying to find a workaround for this for quite some time. So far, I've only found one solution, and it just feels dirty and kludgy to me: start a 2nd application, that waits in the background for the first application to terminate, then re-launches the 1st application. I'm sure it would work, but, yuck.
Edit: Using a 2nd application works. All I did in the second app was:
static void RestartApp(int pid, string applicationName )
{
// Wait for the process to terminate
Process process = null;
try
{
process = Process.GetProcessById(pid);
process.WaitForExit(1000);
}
catch (ArgumentException ex)
{
// ArgumentException to indicate that the
// process doesn't exist? LAME!!
}
Process.Start(applicationName, "");
}
(This is a very simplified example. The real code has lots of sanity checking, error handling, etc)
I might be late to the party but here is my simple solution and it works like a charm with every application I have:
try
{
//run the program again and close this one
Process.Start(Application.StartupPath + "\\blabla.exe");
//or you can use Application.ExecutablePath
//close this one
Process.GetCurrentProcess().Kill();
}
catch
{ }
I had the same exact problem and I too had a requirement to prevent duplicate instances - I propose an alternative solution to the one HiredMind is proposing (which will work fine).
What I am doing is starting the new process with the processId of the old process (the one that triggers the restart) as a cmd line argument:
// Shut down the current app instance.
Application.Exit();
// Restart the app passing "/restart [processId]" as cmd line args
Process.Start(Application.ExecutablePath, "/restart" + Process.GetCurrentProcess().Id);
Then when the new app starts I first parse the cm line args and check if the restart flag is there with a processId, then wait for that process to Exit:
if (_isRestart)
{
try
{
// get old process and wait UP TO 5 secs then give up!
Process oldProcess = Process.GetProcessById(_restartProcessId);
oldProcess.WaitForExit(5000);
}
catch (Exception ex)
{
// the process did not exist - probably already closed!
//TODO: --> LOG
}
}
I am obviously not showing all the safety checks that I have in place etc.
Even if not ideal - I find this a valid alternative so that you don't have to have in place a separate app just to handle restart.
Start/Exit Method
// Get the parameters/arguments passed to program if any
string arguments = string.Empty;
string[] args = Environment.GetCommandLineArgs();
for (int i = 1; i < args.Length; i++) // args[0] is always exe path/filename
arguments += args[i] + " ";
// Restart current application, with same arguments/parameters
Application.Exit();
System.Diagnostics.Process.Start(Application.ExecutablePath, arguments);
This seems to work better than Application.Restart();
Not sure how this handles if your program protects against multiple instance. My guess is you would be better off launching a second .exe which pauses and then starts your main application for you.
It's simple, you just need to call the Application.Restart() method, this will invoke your application to be restarted. You must also exit from the local environment with an error code:
Application.Restart();
Environment.Exit(int errorcode);
You can create an enumeration of error codes so that you application will exit efficeintly.
Another method is to just exit from the application and start the process using the executable path:
Application.Exit();
System.Diagnostics.Process.Start(Application.ExecutablePath);
Try this code:
bool appNotRestarted = true;
This code must also be in the function:
if (appNotRestarted == true) {
appNotRestarted = false;
Application.Restart();
Application.ExitThread();
}
I figured an another solution out, perhaps anyone can use it, too.
string batchContent = "/c \"#ECHO OFF & timeout /t 6 > nul & start \"\" \"$[APPPATH]$\" & exit\"";
batchContent = batchContent.Replace("$[APPPATH]$", Application.ExecutablePath);
Process.Start("cmd", batchContent);
Application.Exit();
Code is simplified so take care of Exceptions and stuff ;)
I fear that restarting the entire application using Process is approaching your problem in the wrong way.
An easier way is to modify the Program.cs file to restart:
static bool restart = true; // A variable that is accessible from program
static int restartCount = 0; // Count the number of restarts
static int maxRestarts = 3; // Maximum restarts before quitting the program
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
while (restart && restartCount < maxRestarts)
{
restart = false; // if you like.. the program can set it to true again
restartCount++; // mark another restart,
// if you want to limit the number of restarts
// this is useful if your program is crashing on
// startup and cannot close normally as it will avoid
// a potential infinite loop
try {
Application.Run(new YourMainForm());
}
catch { // Application has crashed
restart = true;
}
}
}
You are forgetting the command-line options/parameters that were passed in to your currently running instance. If you don't pass those in, you are not doing a real restart. Set the Process.StartInfo with a clone of your process' parameters, then do a start.
For example, if your process was started as myexe -f -nosplash myfile.txt, your method would only execute myexe without all those flags and parameters.
I wanted the new application start up after the old one shuts down.
Using process.WaitForExit() to wait for your own process to shutdown makes no sense. It will always time out.
So, my approach is to use Application.Exit() then wait, but allow events to be processed, for a period of time. Then start a new application with the same arguments as the old.
static void restartApp() {
string commandLineArgs = getCommandLineArgs();
string exePath = Application.ExecutablePath;
try {
Application.Exit();
wait_allowingEvents( 1000 );
} catch( ArgumentException ex ) {
throw;
}
Process.Start( exePath, commandLineArgs );
}
static string getCommandLineArgs() {
Queue<string> args = new Queue<string>( Environment.GetCommandLineArgs() );
args.Dequeue(); // args[0] is always exe path/filename
return string.Join( " ", args.ToArray() );
}
static void wait_allowingEvents( int durationMS ) {
DateTime start = DateTime.Now;
do {
Application.DoEvents();
} while( start.Subtract( DateTime.Now ).TotalMilliseconds > durationMS );
}
You could also use Restarter.
Restarter is an application that automatically monitor and restarts crashed or hung programs and applications. It was originally developed to monitor and restart game servers, but it will do the job for any console or form based program or application
public static void appReloader()
{
//Start a new instance of the current program
Process.Start(Application.ExecutablePath);
//close the current application process
Process.GetCurrentProcess().Kill();
}
Application.ExecutablePath returns your aplication .exe file path
Please follow the order of calls. You might want to place it in a try-catch clause.
The problem of using Application.Restart() is, that it starts a new process but the "old" one is still remaining. Therefor I decided to Kill the old process by using the following code snippet:
if(Condition){
Application.Restart();
Process.GetCurrentProcess().Kill();
}
And it works proper good. In my case MATLAB and a C# Application are sharing the same SQLite database. If MATLAB is using the database, the Form-App should restart (+Countdown) again, until MATLAB reset its busy bit in the database. (Just for side information)
How about create a bat file, run the batch file before closing, and then close the current instance.
The batch file does this:
wait in a loop to check whether the process has exited.
start the process.
Here's my 2 cents:
The sequence Start New Instance->Close Current Instance should work even for the applications that don't allow running multiple copies simultaneously as in this case the new instance may be passed a command-line argument which will indicate that there is a restart in progress so checking for other instances running will not be necessary. Waiting for the first instance to actually finish my be implemented too if it's absolutely imperative that no two intstances are running in parallel.
Application.Restart();
Environment.Exit(0);
I had a similar problem, but mine was related to unmanageable memory leak that I couldn't find on an app that has to run 24/7. With the customer I agreed that safe time to restart the app was 03:00AM if the memory consumption was over the defined value.
I tried Application.Restart, but since it seems to use some mechanism that starts new instance while it is already running, I went for another scheme. I used the trick that file system handles persist until process that created them dies. So, from The Application, i dropped the file to the disk, and didn't Dispose() the handle. I used the file to send 'myself' executable and starting directory also (to add flexibility).
Code:
_restartInProgress = true;
string dropFilename = Path.Combine(Application.StartupPath, "restart.dat");
StreamWriter sw = new StreamWriter(new FileStream(dropFilename, FileMode.Create, FileAccess.ReadWrite, FileShare.ReadWrite));
sw.WriteLine(Application.ExecutablePath);
sw.WriteLine(Application.StartupPath);
sw.Flush();
Process.Start(new ProcessStartInfo
{
FileName = Path.Combine(Application.StartupPath, "VideoPhill.Restarter.exe"),
WorkingDirectory = Application.StartupPath,
Arguments = string.Format("\"{0}\"", dropFilename)
});
Close();
Close() at the end would initiate app shutdown, and file handle I used for StreamWriter here would be held open until process really dies. Then...
Restarter.exe comes into action. It TRIES to read the file in exclusive mode, preventing it to gain access until main app wasn't dead, then starts main app, deletes the file and exists. I guess that it can't be simpler:
static void Main(string[] args)
{
string filename = args[0];
DateTime start = DateTime.Now;
bool done = false;
while ((DateTime.Now - start).TotalSeconds < 30 && !done)
{
try
{
StreamReader sr = new StreamReader(new FileStream(filename, FileMode.Open, FileAccess.ReadWrite, FileShare.ReadWrite));
string[] runData = new string[2];
runData[0] = sr.ReadLine();
runData[1] = sr.ReadLine();
Thread.Sleep(1000);
Process.Start(new ProcessStartInfo { FileName = runData[0], WorkingDirectory = runData[1] });
sr.Dispose();
File.Delete(filename);
done = true;
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
Thread.Sleep(1000);
}
}
I use the following and it does exactly what you are looking for:
ApplicationDeployment ad = ApplicationDeployment.CurrentDeployment;
UpdateCheckInfo info = null;
info = ad.CheckForDetailedUpdate();
if (info.IsUpdateRequired)
{
ad.UpdateAsync(); // I like the update dialog
MessageBox.Show("Application was upgraded and will now restart.");
Environment.Exit(0);
}
for using As logout you need to terminate all app from Ram Cache
so close The Application first and then Rerun it
//on clicking Logout Button
foreach(Form frm in Application.OpenForms.Cast<Form>().ToList())
{
frm.Close();
}
System.Diagnostics.Process.Start(Application.ExecutablePath);
You could enclose your code inside a function and when restart is needed you can just call the function.
Take for instance an application that:
While application is not registered; (upon start) the application should prompt the user to register the application and create a login account.
Once registration is submitted and login credentials are created; the application should restart, check for registration and prompt the user to login with the inserted credentials (so the user can access to all the application features).
Problem:
By building and launching the application from Visual Studio; any of the 4 alternatives bellow will fail to accomplish the tasks required.
/*
* Note(s):
* Take into consideration that the lines bellow don't represent a code block.
* They are just a representation of possibilities,
* that can be used to restart the application.
*/
Application.Restart();
Application.Exit();
Environment.Exit(int errorCode);
Process.GetCurrentProcess().Kill();
What happens is: After creating the Registration, Login and calling Application.Restart(); the application will (strangely) reopen the Registration Form and skip data in a Database (even though the resource is set to "Copy if Newer").
Solution:
Batch Building the application was (for me) a proof that any of the lines above were actually working as expected.
Just not when building and running the application with Visual Studio.
In first place I'd try batch building the application; run it outside Visual Studio and check if Application.Restart() actually works as expected.
Also Check further Info regarding this thread subject:
How do I restart my C# WinForm Application?
I've found a new way that's pretty convenient and has quite a few upsides.
There's never more than one instance running.
Command line args are persisted.
No exit events are raised from the application.
No process handles are broken.
I had a third party application managing my application with Process.Start and using Exit event to reload the application. Many of these solutions would break this implementation which is how I ended up on the following solution.
public static CancellationTokenSource _restartTokenSource;
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main(string[] args)
{
// To customize application configuration such as set high DPI settings or default font,
// see https://aka.ms/applicationconfiguration.
ApplicationConfiguration.Initialize();
while (_restartTokenSource == null || _restartTokenSource.IsCancellationRequested)
{
_restartTokenSource = new System.Threading.CancellationTokenSource();
_restartTokenSource.Token.Register(() =>
{
foreach (Form form in Application.OpenForms)
form.Close();
});
Application.Run(new FlashMain(args));
}
}
Since Application.Run blocks until all forms in the application are closed I put this portion of the initialization into a loop that only executes when a CancellationTokenSource is null (the first run) or IsCancellationRequested is true (restart requested).
I register an event on the CancellationTokenSource that closes all forms in the application when .Cancel() is called, therefore unblocking Application.Run and restarting the loop.
Call Program._restartTokenSource.Cancel(); anywhere in the application to restart it.
P.S. This also works great for injecting into a BlazorWebView to restart the application from .NET Core.