I'm struggling with this for quit some time now. I have GameObject, being a sphere, which is my player on a 3d Terrain. I have a Camera which is always on a fixed distance from the player, follows it where it goes with below script:
public GameObject player;
private Vector3 offset;
// Use this for initialization
void Start () {
offset = transform.position - player.transform.position;
}
void LateUpdate () {
transform.position = player.transform.position + offset;
}
So far so good. However what I actually want is that the camera rotates with the player, so it always looks into the direction where the sphere is moving, but always stays behind the player at the same fixed distance, so that the player is always visible in the camera view.
There are a lot of scripts available, but the problem with the onces I've seen so far is that the camera indeed rotate with the player, but because the player actually is a rolling sphere the camera view is rolling and turning as well.
The best script I found so far is below, but this one has the same problem as the other onces, the camera rolls with the player.
public Transform target;
public float distance = 3.0f;
public float height = 3.0f;
public float damping = 5.0f;
public bool smoothRotation = true;
public bool followBehind = true;
public float rotationDamping = 10.0f;
void Update () {
Vector3 wantedPosition;
if(followBehind)
wantedPosition = target.TransformPoint(0, height, -distance);
else
wantedPosition = target.TransformPoint(0, height, distance);
transform.position = Vector3.Lerp (transform.position, wantedPosition, Time.deltaTime * damping);
if (smoothRotation) {
Quaternion wantedRotation = Quaternion.LookRotation(target.position - transform.position, target.up);
//Quaternion ownRotation = Quaternion.RotateTowards;
transform.rotation = Quaternion.Slerp (transform.rotation, wantedRotation, Time.deltaTime * rotationDamping);
}
else transform.LookAt (target, target.up);
}
Can anyone help me with this please?
using System.Collections;
using System.Collections.Generic;
using UnityEngine;
public class CameraFollow : MonoBehaviour {
public GameObject player;
public float cameraDistance = 10.0f;
// Use this for initialization
void Start () {
}
void LateUpdate ()
{
transform.position = player.transform.position - player.transform.forward * cameraDistance;
transform.LookAt (player.transform.position);
transform.position = new Vector3 (transform.position.x, transform.position.y + 5, transform.position.z);
}
}
My solution (based on #brennon-provencher answer) with smoothness and auto offset:
public class CameraFollow : MonoBehaviour
{
public GameObject target;
public float speed = 5;
Vector3 offset;
void Start()
{
offset = target.transform.position - transform.position;
}
void LateUpdate()
{
// Look
var newRotation = Quaternion.LookRotation(target.transform.position - transform.position);
transform.rotation = Quaternion.Slerp(transform.rotation, newRotation, speed * Time.deltaTime);
// Move
Vector3 newPosition = target.transform.position - target.transform.forward * offset.z - target.transform.up * offset.y;
transform.position = Vector3.Slerp(transform.position, newPosition, Time.deltaTime * speed);
}
}
You need to move your camera position based on sphere movement direction -
public GameObject player;
private Vector3 offset;
float distance;
Vector3 playerPrevPos, playerMoveDir;
// Use this for initialization
void Start () {
offset = transform.position - player.transform.position;
distance = offset.magnitude;
playerPrevPos = player.transform.position;
}
void LateUpdate () {
playerMoveDir = player.transform.position - playerPrevPos;
playerMoveDir.normalize();
transform.position = player.transform.position - playerMoveDir * distance;
transform.LookAt(player.transform.position);
playerPrevPos = player.transform.position;
}
Edit 2: To fix flickering camera, try this -
void LateUpdate () {
playerMoveDir = player.transform.position - playerPrevPos;
if (playerMoveDir != Vector3.zero)
{
playerMoveDir.normalize();
transform.position = player.transform.position - playerMoveDir * distance;
transform.position.y += 5f; // required height
transform.LookAt(player.transform.position);
playerPrevPos = player.transform.position;
}
}
Related
I want to use moverotation to rotate the object in the direction of the Main Camera, like a common third person shooter, but I don't know how to set the quaternion values or otherwise
`using System.Collections;
using System.Collections.Generic;
using UnityEngine;
public class movimento : MonoBehaviour
{
[SerializeField] float walk = 1;
[SerializeField] float run = 2;
Vector3 movement = Vector3.zero;
private Rigidbody rig;
// Start is called before the first frame update
void Start()
{
rig = GetComponent<Rigidbody>();
}
// Update is called once per frame
void Update()
{
if (Input.GetKeyDown(KeyCode.LeftShift)) walk = (walk + run);
if (Input.GetKeyUp(KeyCode.LeftShift)) walk = (walk - run);
float Horizontal = Input.GetAxis("Horizontal");.
float Vertical = Input.GetAxis("Vertical");
movement = Camera.main.transform.forward * Vertical + Camera.main.transform.right * Horizontal;
float origMagnitude = movement.magnitude;
movement.y = 0f;
movement = movement.normalized * origMagnitude;
}
private void FixedUpdate ()
{
rig.MovePosition(rig.position + movement * walk * Time.fixedDeltaTime);
Quaternion rotation = Quaternion.Euler(???);
rig.MoveRotation(rig.rotation * rotation);
}
}`
i use a coroutine to do smooth rotation. I use Quaternion.LookRotation for the job.
so you indicate the position of object to look at and the duration of animation. Here you want to rotate face to the main camera
StartCoroutine(SmoothRotation(Camera.main.transform, 3f));
:
:
IEnumerator SmoothRotation(Transform target, float duration)
{
float currentDelta = 0;
var startrotation = transform.rotation;//use your rigisbody if you want here i use the gameobject
var LookPos = target.position - transform.position;
var finalrot = Quaternion.LookRotation(LookPos);
while (currentDelta <= 1f)
{
currentDelta += Time.deltaTime / duration;
transform.rotation = Quaternion.Lerp(startrotation, finalrot, currentDelta);//
yield return null;
}
transform.rotation = finalrot;
}
if you want to see (in scene when running) where your camera points just add this line of code in update():
Debug.DrawRay(Camera.main.transform.position, Camera.main.transform.TransformDirection(Vector3.forward) * 10f, Color.black);
if you want to point in same direction tha nthe Camera just change the line of finalrot in SmoothRotation Method:
var finalrot = Camera.main.transform.rotation;
you dont need to calculate the LookPos
for your problem of crazy rotation, i suggest you to reset rotation x and z
direction = hit.transform.position - transform.position;
Quaternion rotation = Quaternion.LookRotation(direction);
rotation.x = 0f;
rotation.z = 0f;
a tips to detect object what you want with the raycast inside spere : Physics.OverlapSphere: you could select what you want to cast when using the optional parameter layermask
private void DetectEnemy(Vector3 center, float radius)
{
var hitColliders = Physics.OverlapSphere(center, radius );
for (var i = 0; i < hitColliders.Length; i++)
{
print(hitColliders[i].name + "," + hitColliders[i].transform.position);
// collect information on the hits here
}
}
I created a raycast from the camera, and I would like to rotate the rigidbody to where the raycast is pointing but if i launch unity, it rotated wildly. What is the error?
Vector3 direction;
Vector3 rayDir = new Vector3(Screen.width/2,Screen.height/2);
void Update()
Ray ray = Camera.main.ScreenPointToRay(rayDir);
Debug.DrawRay(ray.origin, ray.direction * 10, Color.yellow);
RaycastHit hit = new RaycastHit ();
direction = hit.point - transform.position;
private void FixedUpdate ()
Quaternion rotation = Quaternion.LookRotation(direction);
rig.MoveRotation(rig.rotation * rotation);
Add a character controller component, this is what is for. See:
https://docs.unity3d.com/Manual/class-CharacterController.html
Hi everyone I'm doing a cannonball mode where players will have a UI panel that looks like a snipe screen. This camera will follow the enemy while in regular play there is another camera for normal play mode( this one stays in place). However when I switch between the two wherever the cannon camera moves when I exit with "E" it stays in that moved position. Is there any way where I can manually revert the position of the camera back in place?
public class CameraFollow : MonoBehaviour
{
public Transform target;
public float smoothSpeed = 0.125f;
public Vector3 offset;
public GameObject scopeOverlay;
public GameObject Camera;
void FixedUpdate ()
{
if (Input.GetKeyDown ("d"))
{
Camera.SetActive (false);
scopeOverlay.SetActive(true);
Vector3 desiredPosition = target.position + offset;
Vector3 smoothedPosition = Vector3.Lerp (transform.position, desiredPosition, smoothSpeed);
transform.position = smoothedPosition;
transform.LookAt (target);
}
if (Input.GetKeyDown ("e"))
{
Camera.SetActive (true);
scopeOverlay.SetActive(false); //To disable it
}
}
}
Save the initial transform values and restore them like so;
private Vector3 initialPosition;
private Quaternion initialRotation;
private void Start ()
{
// Save initial transform values
initialPosition = transform.position;
initialRotation = transform.rotation;
}
void FixedUpdate ()
{
if (Input.GetKeyDown("d"))
{
Camera.SetActive(false);
scopeOverlay.SetActive(true);
Vector3 desiredPosition = target.position + offset;
Vector3 smoothedPosition = Vector3.Lerp(transform.position, desiredPosition, smoothSpeed);
transform.position = smoothedPosition;
transform.LookAt(target);
}
if (Input.GetKeyDown("e"))
{
// Restore transform values
transform.position = initialPosition;
transform.rotation = initialRotation;
Camera.SetActive(true);
scopeOverlay.SetActive(false); //To disable it
}
}
There is my script Rigidbody controller -
public float Speed = 5f;
public float JumpHeight = 2f;
public float GroundDistance = 0.2f;
public float DashDistance = 5f;
public LayerMask Ground;
private Rigidbody _body;
private Vector3 _inputs = Vector3.zero;
private bool _isGrounded = true;
private Transform _groundChecker;
void Start()
{
_body = GetComponent<Rigidbody>();
_groundChecker = transform.GetChild(0);
}
void Update()
{
_isGrounded = Physics.CheckSphere(_groundChecker.position, GroundDistance, Ground, QueryTriggerInteraction.Ignore);
_inputs = Vector3.zero;
_inputs.x = Input.GetAxis("Horizontal");
_inputs.z = Input.GetAxis("Vertical");
if (_inputs != Vector3.zero)
transform.forward = _inputs;
if (Input.GetButtonDown("Jump") && _isGrounded)
{
_body.AddForce(Vector3.up * Mathf.Sqrt(JumpHeight * -2f * Physics.gravity.y), ForceMode.VelocityChange);
}
if (Input.GetButtonDown("Sprint"))
{
Vector3 dashVelocity = Vector3.Scale(transform.forward, DashDistance * new Vector3((Mathf.Log(1f / (Time.deltaTime * _body.drag + 1)) / -Time.deltaTime), 0, (Mathf.Log(1f / (Time.deltaTime * _body.drag + 1)) / -Time.deltaTime)));
_body.AddForce(dashVelocity, ForceMode.VelocityChange);
}
}
void FixedUpdate()
{
_body.MovePosition(_body.position + _inputs * Speed * Time.fixedDeltaTime);
}
What the best way to make a turn on y in the direction of the camera ? That is,the player turns to the side where the mouse is turned? Is it in fixedUpdate or update?
This is the camera script:
public float Smoothness = 0.3F;
public Vector2 Sensitivity = new Vector2(4, 4);
public Vector2 LimitX = new Vector2(-70, 80);
private Vector2 NewCoord;
public Vector2 CurrentCoord;
private Vector2 vel;
public GameManager GameMangerS;
public Transform Target;
public float TransformSpeed;
public Animator CameraAnimator;
void Update()
{
NewCoord.x = Mathf.Clamp(NewCoord.x, LimitX.x, LimitX.y);
NewCoord.x -= Input.GetAxis("Mouse Y") * Sensitivity.x;
NewCoord.y += Input.GetAxis("Mouse X") * Sensitivity.y;
CurrentCoord.x = Mathf.SmoothDamp(CurrentCoord.x, NewCoord.x, ref vel.x, Smoothness / 2);
CurrentCoord.y = Mathf.SmoothDamp(CurrentCoord.y, NewCoord.y, ref vel.y, Smoothness / 2);
transform.rotation = Quaternion.Euler(CurrentCoord.x, CurrentCoord.y, 0);
}
And added this line to the controller script -
void FixedUpdate()
{
_body.MovePosition(_body.position + _inputs * Speed * Time.fixedDeltaTime);
transform.rotation = Quaternion.Euler(0, MainCamera.CurrentCoord.y, 0);
}
When I'm standing the player normally rotates, but when I start to move, all rotations are reset and the player is not moving.
Update
Simple Rotation can be achieved using transform.Rotate().
Example:
this.transform.Rotate(Vector3.up, 30);
This example is gonna rotate the transform by 30° around the Vector that points upwards.
LookAtMouse:
To make your object turn towards the mouse, you need the ScreenToWorldSpace() method from your camera. In order to convert the ScreenCoordinates into your WorldCoordinates.
Example:
Please note:
You have to set the camera instance! If you don't add that, you'll get a NullReferenceException.
This Snippets shall only show the steps needed to achieve the behavior you wish.
You will have to find out yourself how to integrate that lines of code into your code to make it work. Consider what Programmer told you in the comment when integrating that.
Vector3 mousePosition = Input.mousePosition; //get the screenSpaceMousePosition
Vector3 worldPosition = this.camera.ScreenToWorldPoint(mousePosition); //convert it into worldSpacePosition
Vector3 calculatedDirection = worldPosition - transform.position; //calucate the looking direction
calculatedDirection.y = 0;
Quaternion rotation = Quaternion.LookRotation(calculatedDirection);
transform.rotation = Quaternion.Slerp(transform.rotation, rotation, Time.deltaTime);
Trying to make it follow x-axis only. Only follows y when I replace with .y .y
It just doesn't want to work, no matter what I try. (Just started game dev today) I'm pretty noob at coding.
using UnityEngine;
using System.Collections;
public class FollowCamera : MonoBehaviour
{
public float interpVelocity;
public float minDistance;
public float followDistance;
public GameObject target;
public Vector3 offset;
Vector3 targetPos;
// Use this for initialization
void Start()
{
targetPos = transform.position;
}
// Update is called once per frame
void FixedUpdate()
{
if (target)
{
Vector3 posNoZ = transform.position;
posNoZ.z = target.transform.position.z;
Vector3 targetDirection = (target.transform.position - posNoZ);
interpVelocity = targetDirection.magnitude * 5f;
Vector3 factorTowardsTarget = (targetDirection.normalized * interpVelocity * Time.deltaTime);
targetPos = new Vector3(transform.position.x, transform.position.y + factorTowardsTarget.y, transform.position.z);
transform.position = Vector3.Lerp(transform.position, targetPos + offset, 0.25f);
}
}
}
I don't really know much about what I'm doing either, but I gave it a shot. This is my first post.
From what I understand there's a certain order they have to be in, X then Y then Z. And the Y is what was getting the modifier added to it. I just put the modifier on the X position instead.
I tested it, it seems to work.
I just changed this part:
targetPos = new Vector3(transform.position.x, transform.position.y + factorTowardsTarget.y, transform.position.z);
To this:
targetPos = new Vector3(transform.position.x + factorTowardsTarget.x, transform.position.y, transform.position.z);
Result:
using UnityEngine;
using System.Collections;
public class FollowCamera : MonoBehaviour
{
public float interpVelocity;
public float minDistance;
public float followDistance;
public GameObject target;
public Vector3 offset;
Vector3 targetPos;
// Use this for initialization
void Start()
{
targetPos = transform.position;
}
// Update is called once per frame
void FixedUpdate()
{
if (target)
{
Vector3 posNoZ = transform.position;
posNoZ.z = target.transform.position.z;
Vector3 targetDirection = (target.transform.position - posNoZ);
interpVelocity = targetDirection.magnitude * 5f;
Vector3 factorTowardsTarget = (targetDirection.normalized * interpVelocity * Time.deltaTime);
targetPos = new Vector3(transform.position.x + factorTowardsTarget.x, transform.position.y, transform.position.z);
transform.position = Vector3.Lerp(transform.position, targetPos + offset, 0.25f);
}
}
}
This code makes the camera follow the object only on the x position
public Camera MyCamera; // The camera you want to follow the GameObject
public GameObject ObjectToFollow; // What you want to follow
private Vector3 CameraPos; // Variable that contains the Cameras x,y,z position
void Start()
{
CameraPos = MyCamera.transform.position; // stores the Camera's position in the variable
}
// Update is called once per frame
void Update () {
CameraPos.x = ObjectToFollow.transform.position.x; // Change The X position on the camera variable to be the same as the ObjectToFollow X position
MyCamera.transform.position = CameraPos; // Moves the Camera to the new position
}
I have just started programming Unity 2d, and I have faced one large problem: How do I move the camera? The script is attached to the object "player". I want it to move with the player. Thanks!
/*
I
*/
using UnityEngine;
using System.Collections;
public class PlayerController : MonoBehaviour
{
public float speed = 10; //Float for speed
public string hAxis = "Horizontal";
void Start ()
{
//empty
}
void FixedUpdate ()
{
if (Input.GetAxis (hAxis) < 0) //Left
{
Vector3 newScale = transform.localScale;
newScale.y = 1.0f;
newScale.x = 1.0f;
transform.localScale = newScale;
}
else if (Input.GetAxis (hAxis) > 0) //Right
{
Vector3 newScale =transform.localScale;
newScale.x = 1.0f;
transform.localScale = newScale;
}
//Position transformation
transform.position = transform.position + transform.right * Input.GetAxis(axisName) * speed * Time.deltaTime;
}
}
Without any scripts, you could just drag the Camera GameObject to be a child of the player and the camera would start following the player position.
For a script, try this, set player as the target.
using UnityEngine;
using System.Collections;
public class SmoothCamera2D : MonoBehaviour {
public float dampTime = 0.15f;
private Vector3 velocity = Vector3.zero;
public Transform target;
// Update is called once per frame
void Update ()
{
if (target)
{
Vector3 point = camera.WorldToViewportPoint(target.position);
Vector3 delta = target.position - camera.ViewportToWorldPoint(new Vector3(0.5f, 0.5f, point.z)); //(new Vector3(0.5, 0.5, point.z));
Vector3 destination = transform.position + delta;
transform.position = Vector3.SmoothDamp(transform.position, destination, ref velocity, dampTime);
}
}
}