We Keep Coding

Splitting large string in c# and adding values in it to a List

I have a string as shown below
string names = "<?startname; Max?><?startname; Alex?><?startname; Rudy?>";
is there any way I can split this string and add Max , Alex and Rudy into a separate list ?

Sure, split on two strings (all that consistently comes before, and all that consistently comes after) and specify that you want Split to remove the empties:
var r = names.Split(new[]{ "<?startname; ", "?>" }, StringSplitOptions.RemoveEmptyEntries);
If you take out the RemoveEmptyEntries it will give you a more clear idea of how the splitting is working, but in essence without it you'd get your names interspersed with array entries that are empty strings because split found a delimiter (the <?...) immediately following another (the ?>) with an empty string between the delimiters
You can read the volumes of info about this form of split here - that's a direct link to netcore3.1, you can change your version in the table of contents - this variant of Split has been available since framework2.0
You did also say "add to a separate list" - didn't see any code for that so I guess you will either be happy to proceed with r here being "a separate list" (an array actually, but probably adequately equivalent and easy to convert with LINQ's ToList() if not) or if you have another list of names (that really is a List<string>) then you can thatList.AddRange(r) it

Another Idea is to use Regex
The following regex should work :
(?<=; )(.*?)(?=\s*\?>)

Splitting string on commas when data can contain commas

I have a CSV file (which I didn't design and I can't change now nor will I ever be able to change it) that contains lines like the following:
"Surname, Firstname", yes, no, somestring, whatever, etc
As you can see here, the first , is not a comma on which I'd want to split the string. Notice that this particular comma is enclosed within the quotation marks.
Because of this, a simple string.split(',') obviously won't work, as it would give me an array of length 7 for the above string instead of 6.
Is there a way to get around this? I was thinking of using regex to split the string instead but I'm not competent enough in regex to think of a pattern that would only split on commas that are not enclosed inside quotation marks.
I can think of ugly, hacky ways to do it by reading each string char by char but this would have to be a last resort as I'm sure there's a better way to do it!

You can handle this easily by using the TextFieldParser class. Just set HasFieldsEnclosedInQuotes to true.

I would suggest using a CSV parser library - there are other cases that you wouldn't have thought of (new line as part of a quoted field).
The VisualBasic namespace has a nice library that can help - the TextFieldParser.

I know there's a lot of people here who think character-by-character comparisons should never be used and will strongly disagree with me but I'm not convinced companies like Microsoft aren't the only ones who should be doing that sort of programming.
Afterall, Split does character-by-character comparisons so why is it any less ugly when you call existing code that doesn't quite do exactly what you want?
At any rate, my approach was to write my own code. And I've posted the code online at http://www.blackbeltcoder.com/Articles/files/reading-and-writing-csv-files-in-c.

Parsing csv file with commas and quotes as deliminators Pin

So Im reading a csv file and splitting the string with "," as the deliminator
but some of them have quotes as to not split the specific field because it has a comma in it.
1530,Pasadena CA,"2008, 05/01","2005, 12/14"
with just comma it would be:
1530
Pasadena CA
"2008
05/01"
"2005
12/14"
I need it to take commas into consideration when splitting so its like this
1530
Pasadena CA
"2008 05/01"
"2005 12/14"

Take a look at this page for a library that offers quick and easy CSV reading.

While it still may be a new reference, there is a class within the Visual Basic assemblies that should handle this well. At least then you know it's a part of the framework. You can find details here: http://msdn.microsoft.com/en-us/library/microsoft.visualbasic.fileio.textfieldparser.aspx

c# equivalent to stripcslashes function?

I am working with a project that includes getting MMS from a mms-gateway and storing the image on disk.
This includes using a received base64encoded string and storing it as a zip to a web server. This zip is then opened, and the image is retrieved.
We have managed to store it as a zip file, but it is corrupted and cannot be opened.
The documentation from the gateway is pretty sparse, and we have only a php example to rely on. I think we have figured out how to "translate" most of it, except for the PHP function stripcslashes(inputvalue). Can anyone shed shed any light on how to do the same thing in c#?
We are thankful for any help!

stripcslashes() looks for "\x" type elements within longer strings (where 'x' could be any character, or perhaps, more than one). If the 'x' is not recognised as meaningful, it just removes the '\' but if it does recognise it as a valid C-style escape sequence (i.e. "\n" is newline; "\t" is tab, etc.), as I understand it, the recognised character is inserted instead: \t will be replaced by a tab character (0x09, I think) in your string.
I'm not aware of any simple way to get the .net framework to do the same thing without building a similar function yourself. This obviously isn't very hard, but you need to know which escape sequences to process.
If you happen to know (or find out by inspecting your base64 text) that the only thing in your input that will need processing is a particular one or two sequences (say, tab characters), it becomes very easy and the following snippet shows use of String.Replace():
string input = #"Some\thing"; // '#' means string stored without processing '\t'
Console.WriteLine(input);
string output = input.Replace(#"\t", "\t");
Console.WriteLine(output);
Of course, if you really do simply want to remove all the slashes:
string output = input.Replace(#"\", "");

Declaring a looooong single line string in C#

Is there a decent way to declare a long single line string in C#, such that it isn't impossible to declare and/or view the string in an editor?
The options I'm aware of are:
1: Let it run. This is bad because because your string trails way off to the right of the screen, making a developer reading the message have to annoying scroll and read.
string s = "this is my really long string. this is my really long string. this is my really long string. this is my really long string. this is my really long string. this is my really long string. this is my really long string. this is my really long string. ";
2: #+newlines. This looks nice in code, but introduces newlines to the string. Furthermore, if you want it to look nice in code, not only do you get newlines, but you also get awkward spaces at the beginning of each line of the string.
string s = #"this is my really long string. this is my long string.
this line will be indented way too much in the UI.
This line looks silly in code. All of them suffer from newlines in the UI.";
3: "" + ... This works fine, but is super frustrating to type. If I need to add half a line's worth of text somewhere I have to update all kinds of +'s and move text all around.
string s = "this is my really long string. this is my long string. " +
"this will actually show up properly in the UI and looks " +
"pretty good in the editor, but is just a pain to type out " +
"and maintain";
4: string.format or string.concat. Basically the same as above, but without the plus signs. Has the same benefits and downsides.
Is there really no way to do this well?

There is a way. Put your very long string in resources. You can even put there long pieces of text because it's where the texts should be. Having them directly in code is a real bad practice.

If you really want this long string in the code, and you really don't want to type the end-quote-plus-begin-quote, then you can try something like this.
string longString = #"Some long string,
with multiple whitespace characters
(including newlines and carriage returns)
converted to a single space
by a regular expression replace.";
longString = Regex.Replace(longString, #"\s+", " ");

If using Visual Studio
Tools > Options > Text Editor > All Languages > Word Wrap
I'm sure any other text editor (including notepad) will be able to do this!

It depends on how the string is going to wind up being used. All the answers here are valid, but context is important. If long string "s" is going to be logged, it should be surrounded with a logging guard test, such as this Log4net example:
if (log.IsDebug) {
string s = "blah blah blah" +
// whatever concatenation you think looks the best can be used here,
// since it's guarded...
}
If the long string s is going to be displayed to a user, then Developer Art's answer is the best choice...those should be in resource file.
For other uses (generating SQL query strings, writing to files [but consider resources again for these], etc...), where you are concatenating more than just literals, consider StringBuilder as Wael Dalloul suggests, especially if your string might possibly wind up in a function that just may, at some date in the distant future, be called many many times in a time-critical application (All those invocations add up). I do this, for example, when building a SQL query where I have parameters that are variables.
Other than that, no, I don't know of anything that both looks pretty and is easy to type (though the word wrap suggestion is a nice idea, it may not translate well to diff tools, code print outs, or code review tools). Those are the breaks. (I personally use the plus-sign approach to make the line-wraps neat for our print outs and code reviews).

you can use StringBuilder like this:
StringBuilder str = new StringBuilder();
str.Append("this is my really long string. this is my long string. ");
str.Append("this is my really long string. this is my long string. ");
str.Append("this is my really long string. this is my long string. ");
str.Append("this is my really long string. this is my long string. ");
string s = str.ToString();
You can also use: Text files, resource file, Database and registry.

Does it have to be defined in the source file? Otherwise, define it in a resource or config file.

Personally I would read a string that big from a file perhaps an XML document.

You could use StringBuilder

For really long strings, I'd store it in XML (or a resource). For occasions where it makes sense to have it in the code, I use the multiline string concatenation with the + operator. The only place I can think of where I do this, though, is in my unit tests for code that reads and parses XML where I'm actually trying to avoid using an XML file for testing. Since it's a unit test I almost always want to have the string right there to refer to as well. In those cases I might segregate them all into a #region directive so I can show/hide it as needed.

I either just let it run, or use string.format and write the string in one line (the let it run method) but put each of the arguments in new line, which makes it either easier to read, or at least give the reader some idea what he can expect in the long string without reading it in detail.

Use the Project / Properties / Settings from the top menu of Visual Studio. Make the scope = "Application".
In the Value box you can enter very long strings and as a bonus line feeds are preserved. Then your code can refer to that string like this:
string sql = Properties.Settings.Default.xxxxxxxxxxxxx;