My company has several desktop applications that needs to be launched from an ASP.Net Core web application. Also the applications are going to be updated if there is a newer version. The web application would be working offline (only accessible to a specific LAN), and all the applications and clients would be in the same network. So basically, I am trying to create a Launcher/Updater Web Application.
The problem here is, web browsers are not capable manipulating (installing, launching or updating) applications that are on the client machine in a direct manner. We already checked Microsoft`s ClickOnce solution on updating applications but there are some reasons why we do not want to use it.
My question is, if there is any way to read, write and edit client side data, with or without an extra client side application from a Web application?
I had a similar problem. There is no way to update client without using an additional program (at least in my experience). You won't be able to delete and replace libs and executable when the files are in use (read the software is running).
I wrote a small application to handle restart, update, and monitoring of the main application.
If you need more info about the approach I used let me know.
Related
I'm looking for a way to establish a simple communication between a c# web application and the operating system.
Since i'm working on Silverlight, i get everything i need to create files into any folder on the C:/ Disk. The problem is that we're going to migrate from Silverlight to Html 5 / C#
So i'd need a way to create files FROM any browser to any OS : Windows,Mac,Linux ..
I thought about using Microsoft Active X but that's not cross platforms.
I'm simply looking for a technology/plugin/software or anything that would allow me to do that, the less client interaction would be the best.
I think your need is in conflict with any common sense about security. If there was a simple way to create any file on any computer that loads your web app, just imagine how quickly all sorts of malware would spread.
But going back to your question - I think it will not be simple (btw. was it really simple in silverlight?). What I can imagine is to have some kind of service running on a client PC (the user would have to install it, or it could be corporate policy if your web app is targeted at corporate solutions). Then the service would listen on some TCP port and your web app could send requests to that port with the intent to create particular file with particular content. All the security concerns would be then implemented in mentioned service so that it doesn't get abused by hostile web apps
I have desktop application that can be installed on the users computer with "setup" msi file like any other application.
I'm developing web application and I need somehow to integrate the desktop application with the web application. Web application is developed using PHP (desktop application is developed using C#), and when clicking on one button on the web application, the desktop application needs to be launched.
Is there a way of doing this? I was thinking about a few scenarios:
-Maybe if possible to install the app directly on the server and to launch it from there?
-Maybe to be required the user to have the app installed on his computer and to call the app from there?
If possible I would prefer to not use the second approach because it's better if the third party to not be involved - it will be more user friendly if the application is launched directly. But any help will be appreciated because at this point I'm not sure if that is possible to be done at all.
You can install app at server an run it with exec() or "`" operator - but to control gui of app you need to use some like autoit ant etc.
If you ultimately decide to require your users to have the client application installed and expect majority of the users to be on Windows, you could register your application to handle specific scheme and parse its command line when started. More on this here:
http://msdn.microsoft.com/en-us/library/aa767914(v=vs.85).aspx
You'd register a custom scheme and then intercept in in the application's command line arguments. The whole URL will be passed as an argument, e.g.:
myapp://parameter1,parameter2
The browser will mostly ask whether or not the user trusts the application to handle this scheme with an option to remember this setting.
If you don't have access to the source code of the client application, you can develop a middleware, some sort of a launcher that handles the URL and then runs the client application after maybe modifying some configuration files based on the URL or otherwise controlling the third-party application to do as you with.
As for solution #1, I don't think C# matters if your application can run on Mono, so you should be able to just run it from PHP. However, this probably won't work on web hosting and you will have to get a VPS for that.
There are very good (security) reasons why it is hard to launch client-side processes from web browsers.
Do you have access to the source code of the C# app? If so, you could consider modifying it to take advantage of Microsoft ClickOnce deployment.
Some references:
http://msdn.microsoft.com/en-us/library/t71a733d.aspx
http://msdn.microsoft.com/en-us/library/t71a733d(v=vs.80).aspx
http://msdn.microsoft.com/en-us/library/6ae39a7c.aspx
http://www.codemag.com/Article/0902031
Here's an old article on deploying WinForms applications via ClickOnce with Visual Studio 2005: http://msdn.microsoft.com/en-us/library/ms953320.aspx
It can possibly be done with IIS but it can be cumbersome setting it up to run as the current user, especially since it would probably also need to run elevated for an app that needs to attach to the current user's desktop.
Easiest is to install a Windows LAMP distro (like WAMP: http://www.wampserver.com/en/) and then run the httpd.exe directly from an elevated (Admin) command prompt; do not run apache as a service!
Once you do this performing and exec("command"); call in php will bring up a desktop app as if it was invoked from an admin command prompt. Obviously you need to set up the apache server to be accessible from outside the local system, etc.
Hi.
I have several questions. I developed an application using Visual Studio 2010. The application is developed using Windows Form and the program was wrote using C#.
This application needs to be run on a server. There are several clients connected to the server that will access and use that application through the browser. I know this can be done using Smart Client technique. But I don't really understand how to do it. My questions are:
Is there any syntax/class/methods/function that I need to include in my application? How to use it?
What settings/configuration do I need to set up so that the client computer can access the application in the server through their browser?
I know this can be done using ClickOnce but I don't know how. Can anybody tell me or show me the steps that I need to do to implement this?
Is there any syntax/class/methods/function that I need to include in my application? How to use it?
There are a few - but this is a large area. I would point you at couple:
WCF
ASP.NET Web API.
I would advise to use the later as it appears to be where the modern development is heading (at least to me).
Put simply, you will write your own web server, host it either in your WinForms application or migrate your WinForms to be a web application and host it on IIS, for example. Your web server will expose some API, which will likely to be based on HTTP protocol. A client application will hit web URLs. This will be a request-response paradigm.
Because this is a large area, I cannot name you exact classes, but have a look at ASP.NET site for samples.
What settings/configuration do I need to set up so that the client computer can access the application in the server through their browser?
It depends on the technology. Usually it's pretty simple - get it from tutorials and samples. In most cases this will be *.config file XML code and some minor bootstrapping in .cs files.
I know this can be done using ClickOnce but I don't know how. Can anybody tell me or show me the steps that I need to do to implement this?
ClickOnce is a deployment tool. You probably don't need that at this point.
I am writing a Windows application using C#. I am planning on later to allow it to be controlled over the intranet using browser also. So in future we should be able to control it both using the local interface or over the intranet from the browser.
Is there any pre-defined architecture which will allow me to do this? What are the methods of achieving this? I am new to C#/.Net.
EDIT:
The windows application needs to access the communication ports extensively, and needs to be pretty stable and would probably run for some days together.
Thanks...
I can't tell you if a specific package exists that would ease the development. But, if I were to attempt it, after Googling and not finding something already available and meeting my needs, I would likely make my application a WCF host. Create service entry points to accept control messages remotely. You would also need some well-know location where to register your application so the remote system could find it. You should be sure to provide the user with a way of disabling the application remote control feature.
Your host interface will need to run on its own thread to remain performant. Since you are new to C#, and presumably windows forms application development, you will need to read up on how to properly talk to the GUI controls from a non-GUI thread.
Alternatively, you may want to implement your application as two distinct units, one with a GUI that does all the user interaction. It would form service requests to send to the host portion (with no GUI). Your app could then operate locally or be controlled remotely.
One solution I have used in a similar situation has three parts :-
1) Win32 (local) Service
Manages the COM ports and does whatever is necessary with the attached hardware
2) WinForms/Console Application
Runs on the local machine and communicates with the local service via named pipes or TCP.
3) Web Server + Web App
Runs on local or remote machine & communicates with local service.
The local user can shut the WinForms application down and log-off without affecting the service or remote users.
The newest version of Silverlight (the version that ships with Visual Studio 2010) allows what Microsoft terms the "Out Of Browser Experience" (OOB for short).
This allows the user to set up the Silverlight application as a desktop application as well as running through a browser.
Rudi Grobbler has just blogged about how he went about setting this up on his PC.
I've been writing desktop apps in C# for some time now but I'm increasingly getting frustrated with the fact that not everyone has .NET 2 or Higher installed. I don't have the option of upgrading their systems to meet my needs. My apps are mostly utilities that run alongside the main program the company I work for has. They access the file system and the registry. Being relatively new to programming in general, I was wondering if moving these tools to the web would solve some of my problems. But I have no idea if web apps can have access to these parts of Windows. I was thinking of writing these web apps in either Rails or ASP.NET. So my question is this. Can a web app access and modify the registry and file system of Windows?
Thanks.
Nope, "web apps" like asp.net or rails apps run on the server alone and just serve html to the client. So all the client-side code can do is what jscript running in the browser sandbox can do, ie no file access or registry access.
You can however install an activex on the client computer that gets full access, but the user has to agree to install it as it's a security risk.
Writing the apps as Web apps instead (and Rails is cool to use) is a good option - your users don't need to install anything, upgrades are easy to do, and dependancies are no longer a problem.
However, you now need to start re-architecting your apps so they do not need to write anything to the client, except a cookie (that's stored in the browser). If you can do this, then migrating to a webapp will be great.
If you cannot, my advice is to learn the same language that your company's app is written in. Once you do that, the company app will have taken care of the dependencies already and you will just need to offer your utilities alongside the app, perhaps even in the installer, or just to copy the files into a subdirectory. If you're thinking of learning Ruby, then learning the corporate language will be just as difficult (only you'll be able to reuse a lot of code used in the main app)
No, a traditional asp.net application cannot access the file system or registry on the windows box. Simply put because it doesn't actually run on the client machine. Instead it runs on the server where it does not have access to the local machine.
It is possible to have portions of the application which run on the client machine. Browser based applications for instance. However these would require that the 2.0 framework be installed on the customers machine which puts you right back at square #1.
No, this isn't possible. Web applications cannot modify the registry and/or file system on a user's machine because of the security implications. You would need to develop a Windows app to do these kind of changes. You could always make this tool available for download on your website though.
No, you can't do that with a web application. Besides others have already said, a web application run in a browser, not inside an operating system, so all you can do is what browsers allows you to do and not all you want, and browsers doesn't allows you to take control of the host machine.
I'm guessing the desktop app used in your company uses the registry to store workstation / user specific (state)data.
Moving to a web based app does not mean storing state data is no longer possible, just account for it by including a table in your database that can be used to save that same (state)data in. The registry is no longer needed.
Another pro is that by moving to a fully webbased application, you never have to worry about your endusers, because the code is running on the server, all the enduser gets is the output in html :-D.
The only thing to keep in mind is cross browser compatibility, don't create an app that works in IE only for instance, it has to look and work the same in all major browsers.
There are a few products out there, such as Xenocode and VMWare's ThinApp, that allow you to virtualize your app's dependencies to the point where your .NET app can run on a machine without the .NET Framework installed. Just another option from left field.