I am pulling in text from a database that is formatted like the sample below. I want to insert the domain name in front of every URL within this block of text.
<p>We recommend you check out the article
<a id="navitem" href="/article/why-apples-new-iphones-may-delight-and-worry-it-pros/" target="_top">
Why Apple's new iPhones may delight and worry IT pros</a> to learn more</p>
So with the example above in mind I want to insert http://www.mydomainname.com/ into the URL so it reads:
href="http://www.mydomainname.com/article/why-apples-new-iphones-may-delight-and-worry-it-pros/"
I figured I could use regex and replace href=" with href="http://www.mydomainname.com but this appears to not be working as I intended. Any suggestions or better methods I should be attempting?
var content = Regex.Replace(DataBinder.Eval(e.Item.DataItem, "Content").ToString(),
"^href=\"$", "href=\"https://www.mydomainname.com/");
You could use regex...
...but it's very much the wrong tool for the job.
Uri has some handy constructors/factory methods for just this purpose:
Uri ConvertHref(Uri sourcePageUri, string href)
{
//could really just be return new Uri(sourcePageUri, href);
//but TryCreate gives more options...
Uri newAbsUri;
if (Uri.TryCreate(sourcePageUri, href, out newAbsUri))
{
return newAbsUri;
}
throw new Exception();
}
so, say sourcePageUri is
var sourcePageUri = new Uri("https://somehost/some/page");
the output of our method with a few different values for href:
https://www.foo.com/woo/har => https://www.foo.com/woo/har
/woo/har => https://somehost/woo/har
woo/har => https://somehost/some/woo/har
...so it's the same interpretation as the browser makes. Perfect, no?
Try this code:
var content = Regex.Replace(DataBinder.Eval(e.Item.DataItem, "Content").ToString(),
"(href=[ \t]*\")\/", "$1https://www.mydomainname.com/", RegexOptions.Multiline);
Use html parser, like CsQuery.
var html = "your html text here";
var path = "http://www.mydomainname.com";
CQ dom = html;
CQ links = dom["a"];
foreach (var link in links)
link.SetAttribute("href", path + link["href"]);
html = dom.Html();
Related
I'm trying to get an XML-text from a wabpage, that is already opened in IE. Web requests are not allowed because of a security of target page (long boring story with certificates etc). I use method to walk through all opened pages and, if I found a match with page's URI, I need to get it's XML.
Some time ago I needed to get an HTML-code between body tags. I used method with IHTMLDocument2 like this:
private string GetSourceHTML()
{
Regex reg = new Regex(patternURL);
Match match;
string result;
foreach (SHDocVw.InternetExplorer ie in shellWindows)
{
match = reg.Match(ie.LocationURL.ToString());
if (!string.IsNullOrEmpty(match.Value))
{
mshtml.IHTMLDocument2 doc = (mshtml.IHTMLDocument2)ie.Document;
result = doc.body.innerHTML.ToString();
return result;
}
}
result = string.Empty;
return result;
}
So now I need to get a whole XML-code of a target page. I've googled a lot, but didn't find anything useful. Any ideas? Thanks.
Have you tried this? It should get the HTML, which hopefully you could parse to XML?
Retrieving the HTML source code
I'm having an issue updating a RichText box on a SharePoint 2010 list.
_batchElement.InnerXml =
string.Format(
"<Method ID='1' Cmd='New'><Field RichText='True' Name='Other_x0020_Items_x0020_of_x0020'>{0}</Field><Field Name='Overall_x0020_rating_x0020_of_x0'>{1}</Field><Field Name='Do_x0020_you_x0020_wish_x0020_to'>{2}</Field></Method>",
add_Report_Details.Rtf,
arrText,
addreportwish);
And the code to trigger the update:
ListService.UpdateListItems(ListName, _batchElement);
But, given that this xml element cannot have anything starting with a \ it doesn't want to work.
I have tried HTML as well, even passing HTML through agility pack, and it just doesn't work either.
What is the proper method or field name or something to update that richtextbox?
do i need a cdata? or something? I'm very confused, and the doco on MSDN isn't that great for this method.
Pass it through an HTML encode, and it seems to work fine:
private static string SetProperHTML(string sHtml)
{
var sb = new StringBuilder();
var stringWriter = new StringWriter(sb);
string input = sHtml;
var test = new HtmlAgilityPack.HtmlDocument();
test.LoadHtml(input);
test.OptionOutputAsXml = false;
test.OptionCheckSyntax = true;
test.OptionFixNestedTags = true;
test.OptionAutoCloseOnEnd = true;
test.OptionWriteEmptyNodes = true;
test.Save(stringWriter);
Console.WriteLine(sb.ToString());
return WebUtility.HtmlEncode(sb.ToString().Replace(Environment.NewLine, ""));
}
Also want to make sure that your field descriptor is setup properly:
_batchElement.InnerXml =
string.Format(
"<Method ID='1' Cmd='New'><Field Name='Other_x0020_Items_x0020_of_x0020'>{0}</Field><Field Name='Overall_x0020_rating_x0020_of_x0'>{1}</Field><Field Name='Do_x0020_you_x0020_wish_x0020_to'>{2}</Field></Method>",
SetProperHTML(add_Report_Details.Document.Body.InnerHtml),
arrText,
addreportwish);
it's a field like any other, no special child tags needed. As long as the Sp2010 field on the form is setup for 100% full HTML, this should work. There are other HTMLEncoders out there, which may be better than the WebUtility but, for the most part, this should work, given Agility Pack is fixing most of the HTML.
Is there a better way to generate HTML email in C# (for sending via System.Net.Mail), than using a Stringbuilder to do the following:
string userName = "John Doe";
StringBuilder mailBody = new StringBuilder();
mailBody.AppendFormat("<h1>Heading Here</h1>");
mailBody.AppendFormat("Dear {0}," userName);
mailBody.AppendFormat("<br />");
mailBody.AppendFormat("<p>First part of the email body goes here</p>");
and so on, and so forth?
You can use the MailDefinition class.
This is how you use it:
MailDefinition md = new MailDefinition();
md.From = "test#domain.example";
md.IsBodyHtml = true;
md.Subject = "Test of MailDefinition";
ListDictionary replacements = new ListDictionary();
replacements.Add("{name}", "Martin");
replacements.Add("{country}", "Denmark");
string body = "<div>Hello {name} You're from {country}.</div>";
MailMessage msg = md.CreateMailMessage("you#anywhere.example", replacements, body, new System.Web.UI.Control());
Also, I've written a blog post on how to generate HTML e-mail body in C# using templates using the MailDefinition class.
Use the System.Web.UI.HtmlTextWriter class.
StringWriter writer = new StringWriter();
HtmlTextWriter html = new HtmlTextWriter(writer);
html.RenderBeginTag(HtmlTextWriterTag.H1);
html.WriteEncodedText("Heading Here");
html.RenderEndTag();
html.WriteEncodedText(String.Format("Dear {0}", userName));
html.WriteBreak();
html.RenderBeginTag(HtmlTextWriterTag.P);
html.WriteEncodedText("First part of the email body goes here");
html.RenderEndTag();
html.Flush();
string htmlString = writer.ToString();
For extensive HTML that includes the creation of style attributes HtmlTextWriter is probably the best way to go. However it can be a bit clunky to use and some developers like the markup itself to be easily read but perversly HtmlTextWriter's choices with regard indentation is a bit wierd.
In this example you can also use XmlTextWriter quite effectively:-
writer = new StringWriter();
XmlTextWriter xml = new XmlTextWriter(writer);
xml.Formatting = Formatting.Indented;
xml.WriteElementString("h1", "Heading Here");
xml.WriteString(String.Format("Dear {0}", userName));
xml.WriteStartElement("br");
xml.WriteEndElement();
xml.WriteElementString("p", "First part of the email body goes here");
xml.Flush();
Updated Answer:
The documentation for SmtpClient, the class used in this answer, now reads, 'Obsolete("SmtpClient and its network of types are poorly designed, we strongly recommend you use https://github.com/jstedfast/MailKit and https://github.com/jstedfast/MimeKit instead")'.
Source: https://www.infoq.com/news/2017/04/MailKit-MimeKit-Official
Original Answer:
Using the MailDefinition class is the wrong approach. Yes, it's handy, but it's also primitive and depends on web UI controls--that doesn't make sense for something that is typically a server-side task.
The approach presented below is based on MSDN documentation and Qureshi's post on CodeProject.com.
NOTE: This example extracts the HTML file, images, and attachments from embedded resources, but using other alternatives to get streams for these elements are fine, e.g. hard-coded strings, local files, and so on.
Stream htmlStream = null;
Stream imageStream = null;
Stream fileStream = null;
try
{
// Create the message.
var from = new MailAddress(FROM_EMAIL, FROM_NAME);
var to = new MailAddress(TO_EMAIL, TO_NAME);
var msg = new MailMessage(from, to);
msg.Subject = SUBJECT;
msg.SubjectEncoding = Encoding.UTF8;
// Get the HTML from an embedded resource.
var assembly = Assembly.GetExecutingAssembly();
htmlStream = assembly.GetManifestResourceStream(HTML_RESOURCE_PATH);
// Perform replacements on the HTML file (if you're using it as a template).
var reader = new StreamReader(htmlStream);
var body = reader
.ReadToEnd()
.Replace("%TEMPLATE_TOKEN1%", TOKEN1_VALUE)
.Replace("%TEMPLATE_TOKEN2%", TOKEN2_VALUE); // and so on...
// Create an alternate view and add it to the email.
var altView = AlternateView.CreateAlternateViewFromString(body, null, MediaTypeNames.Text.Html);
msg.AlternateViews.Add(altView);
// Get the image from an embedded resource. The <img> tag in the HTML is:
// <img src="pid:IMAGE.PNG">
imageStream = assembly.GetManifestResourceStream(IMAGE_RESOURCE_PATH);
var linkedImage = new LinkedResource(imageStream, "image/png");
linkedImage.ContentId = "IMAGE.PNG";
altView.LinkedResources.Add(linkedImage);
// Get the attachment from an embedded resource.
fileStream = assembly.GetManifestResourceStream(FILE_RESOURCE_PATH);
var file = new Attachment(fileStream, MediaTypeNames.Application.Pdf);
file.Name = "FILE.PDF";
msg.Attachments.Add(file);
// Send the email
var client = new SmtpClient(...);
client.Credentials = new NetworkCredential(...);
client.Send(msg);
}
finally
{
if (fileStream != null) fileStream.Dispose();
if (imageStream != null) imageStream.Dispose();
if (htmlStream != null) htmlStream.Dispose();
}
I use dotLiquid for exactly this task.
It takes a template, and fills special identifiers with the content of an anonymous object.
//define template
String templateSource = "<h1>{{Heading}}</h1>Dear {{UserName}},<br/><p>First part of the email body goes here");
Template bodyTemplate = Template.Parse(templateSource); // Parses and compiles the template source
//Create DTO for the renderer
var bodyDto = new {
Heading = "Heading Here",
UserName = userName
};
String bodyText = bodyTemplate.Render(Hash.FromAnonymousObject(bodyDto));
It also works with collections, see some online examples.
I would recomend using templates of some sort. There are various different ways to approach this but essentially hold a template of the Email some where (on disk, in a database etc) and simply insert the key data (IE: Recipients name etc) into the template.
This is far more flexible because it means you can alter the template as required without having to alter your code. In my experience your likely to get requests for changes to the templates from end users. If you want to go the whole hog you could include a template editor.
As an alternative to MailDefinition, have a look at RazorEngine https://github.com/Antaris/RazorEngine.
This looks like a better solution.
Attributted to...
how to send email wth email template c#
E.g
using RazorEngine;
using RazorEngine.Templating;
using System;
namespace RazorEngineTest
{
class Program
{
static void Main(string[] args)
{
string template =
#"<h1>Heading Here</h1>
Dear #Model.UserName,
<br />
<p>First part of the email body goes here</p>";
const string templateKey = "tpl";
// Better to compile once
Engine.Razor.AddTemplate(templateKey, template);
Engine.Razor.Compile(templateKey);
// Run is quicker than compile and run
string output = Engine.Razor.Run(
templateKey,
model: new
{
UserName = "Fred"
});
Console.WriteLine(output);
}
}
}
Which outputs...
<h1>Heading Here</h1>
Dear Fred,
<br />
<p>First part of the email body goes here</p>
Heading Here Dear Fred, First part of the email
body goes here
Emitting handbuilt html like this is probably the best way so long as the markup isn't too complicated. The stringbuilder only starts to pay you back in terms of efficiency after about three concatenations, so for really simple stuff string + string will do.
Other than that you can start to use the html controls (System.Web.UI.HtmlControls) and render them, that way you can sometimes inherit them and make your own clasess for complex conditional layout.
If you don't want a dependency on the full .NET Framework, there's also a library that makes your code look like:
string userName = "John Doe";
var mailBody = new HTML {
new H(1) {
"Heading Here"
},
new P {
string.Format("Dear {0},", userName),
new Br()
},
new P {
"First part of the email body goes here"
}
};
string htmlString = mailBody.Render();
It's open source, you can download it from http://sourceforge.net/projects/htmlplusplus/
Disclaimer: I'm the author of this library, it was written to solve the same issue exactly - send an HTML email from an application.
You might want to have a look at some of the template frameworks that are available at the moment. Some of them are spin offs as a result of MVC but that isn't required. Spark is a good one.
A commercial version which I use in production and allows for easy maintenance is LimiLabs Template Engine, been using it for 3+ years and allows me to make changes to the text template without having to update code (disclaimers, links etc..) - it could be as simple as
Contact templateData = ...;
string html = Template
.FromFile("template.txt")
.DataFrom(templateData )
.Render();
Worth taking a look at, like I did; after attempting various answers mentioned here.
I'm trying to parse this field, but can't get it to work. Current attempt:
var name = doc.DocumentNode.SelectSingleNode("//*[#id='my_name']").InnerHtml;
<h1 class="bla" id="my_name">namehere</h1>
Error: Object reference not set to an instance of an object.
Appreciate any help.
#John - I can assure that the HTML is correctly loaded. I am trying to read my facebook name for learning purposes. Here is a screenshot from the Firebug plugin. The version i am using is 1.4.0.
http://i54.tinypic.com/kn3wo.jpg
I guess the problem is that profile_name is a child node or something, that's why I'm not able to read it?
The reason your code doesn't work is because there is JavaScript on the page that is actually writing out the <h1 id='profile_name'> tag, so if you're requesting the page from a User Agent (or via AJAX) that doesn't execute JavaScript then you won't find the element.
I was able to get my own name using the following selector:
string name =
doc.DocumentNode.SelectSingleNode("//a[#id='navAccountName']").InnerText;
Try this:
var name = doc.DocumentNode.SelectSingleNode("//#id='my_name'").InnerHtml;
HtmlAgilityPack.HtmlNode name = doc.DocumentNode.SelectSingleNode("//h1[#id='my_name']").InnerText;
public async Task<List<string>> GetAllTagLinkContent(string content)
{
string html = string.Format("<html><head></head><body>{0}</body></html>", content);
HtmlDocument doc = new HtmlDocument();
doc.LoadHtml(html);
var nodes = doc.DocumentNode.SelectNodes("//[#id='my_name']");
return nodes.ToList().ConvertAll(r => r.InnerText).Select(j => j).ToList();
}
It's ok with ("//a[#href]"); You can try it as above.Hope helpful
Is there a better way to generate HTML email in C# (for sending via System.Net.Mail), than using a Stringbuilder to do the following:
string userName = "John Doe";
StringBuilder mailBody = new StringBuilder();
mailBody.AppendFormat("<h1>Heading Here</h1>");
mailBody.AppendFormat("Dear {0}," userName);
mailBody.AppendFormat("<br />");
mailBody.AppendFormat("<p>First part of the email body goes here</p>");
and so on, and so forth?
You can use the MailDefinition class.
This is how you use it:
MailDefinition md = new MailDefinition();
md.From = "test#domain.example";
md.IsBodyHtml = true;
md.Subject = "Test of MailDefinition";
ListDictionary replacements = new ListDictionary();
replacements.Add("{name}", "Martin");
replacements.Add("{country}", "Denmark");
string body = "<div>Hello {name} You're from {country}.</div>";
MailMessage msg = md.CreateMailMessage("you#anywhere.example", replacements, body, new System.Web.UI.Control());
Also, I've written a blog post on how to generate HTML e-mail body in C# using templates using the MailDefinition class.
Use the System.Web.UI.HtmlTextWriter class.
StringWriter writer = new StringWriter();
HtmlTextWriter html = new HtmlTextWriter(writer);
html.RenderBeginTag(HtmlTextWriterTag.H1);
html.WriteEncodedText("Heading Here");
html.RenderEndTag();
html.WriteEncodedText(String.Format("Dear {0}", userName));
html.WriteBreak();
html.RenderBeginTag(HtmlTextWriterTag.P);
html.WriteEncodedText("First part of the email body goes here");
html.RenderEndTag();
html.Flush();
string htmlString = writer.ToString();
For extensive HTML that includes the creation of style attributes HtmlTextWriter is probably the best way to go. However it can be a bit clunky to use and some developers like the markup itself to be easily read but perversly HtmlTextWriter's choices with regard indentation is a bit wierd.
In this example you can also use XmlTextWriter quite effectively:-
writer = new StringWriter();
XmlTextWriter xml = new XmlTextWriter(writer);
xml.Formatting = Formatting.Indented;
xml.WriteElementString("h1", "Heading Here");
xml.WriteString(String.Format("Dear {0}", userName));
xml.WriteStartElement("br");
xml.WriteEndElement();
xml.WriteElementString("p", "First part of the email body goes here");
xml.Flush();
Updated Answer:
The documentation for SmtpClient, the class used in this answer, now reads, 'Obsolete("SmtpClient and its network of types are poorly designed, we strongly recommend you use https://github.com/jstedfast/MailKit and https://github.com/jstedfast/MimeKit instead")'.
Source: https://www.infoq.com/news/2017/04/MailKit-MimeKit-Official
Original Answer:
Using the MailDefinition class is the wrong approach. Yes, it's handy, but it's also primitive and depends on web UI controls--that doesn't make sense for something that is typically a server-side task.
The approach presented below is based on MSDN documentation and Qureshi's post on CodeProject.com.
NOTE: This example extracts the HTML file, images, and attachments from embedded resources, but using other alternatives to get streams for these elements are fine, e.g. hard-coded strings, local files, and so on.
Stream htmlStream = null;
Stream imageStream = null;
Stream fileStream = null;
try
{
// Create the message.
var from = new MailAddress(FROM_EMAIL, FROM_NAME);
var to = new MailAddress(TO_EMAIL, TO_NAME);
var msg = new MailMessage(from, to);
msg.Subject = SUBJECT;
msg.SubjectEncoding = Encoding.UTF8;
// Get the HTML from an embedded resource.
var assembly = Assembly.GetExecutingAssembly();
htmlStream = assembly.GetManifestResourceStream(HTML_RESOURCE_PATH);
// Perform replacements on the HTML file (if you're using it as a template).
var reader = new StreamReader(htmlStream);
var body = reader
.ReadToEnd()
.Replace("%TEMPLATE_TOKEN1%", TOKEN1_VALUE)
.Replace("%TEMPLATE_TOKEN2%", TOKEN2_VALUE); // and so on...
// Create an alternate view and add it to the email.
var altView = AlternateView.CreateAlternateViewFromString(body, null, MediaTypeNames.Text.Html);
msg.AlternateViews.Add(altView);
// Get the image from an embedded resource. The <img> tag in the HTML is:
// <img src="pid:IMAGE.PNG">
imageStream = assembly.GetManifestResourceStream(IMAGE_RESOURCE_PATH);
var linkedImage = new LinkedResource(imageStream, "image/png");
linkedImage.ContentId = "IMAGE.PNG";
altView.LinkedResources.Add(linkedImage);
// Get the attachment from an embedded resource.
fileStream = assembly.GetManifestResourceStream(FILE_RESOURCE_PATH);
var file = new Attachment(fileStream, MediaTypeNames.Application.Pdf);
file.Name = "FILE.PDF";
msg.Attachments.Add(file);
// Send the email
var client = new SmtpClient(...);
client.Credentials = new NetworkCredential(...);
client.Send(msg);
}
finally
{
if (fileStream != null) fileStream.Dispose();
if (imageStream != null) imageStream.Dispose();
if (htmlStream != null) htmlStream.Dispose();
}
I use dotLiquid for exactly this task.
It takes a template, and fills special identifiers with the content of an anonymous object.
//define template
String templateSource = "<h1>{{Heading}}</h1>Dear {{UserName}},<br/><p>First part of the email body goes here");
Template bodyTemplate = Template.Parse(templateSource); // Parses and compiles the template source
//Create DTO for the renderer
var bodyDto = new {
Heading = "Heading Here",
UserName = userName
};
String bodyText = bodyTemplate.Render(Hash.FromAnonymousObject(bodyDto));
It also works with collections, see some online examples.
I would recomend using templates of some sort. There are various different ways to approach this but essentially hold a template of the Email some where (on disk, in a database etc) and simply insert the key data (IE: Recipients name etc) into the template.
This is far more flexible because it means you can alter the template as required without having to alter your code. In my experience your likely to get requests for changes to the templates from end users. If you want to go the whole hog you could include a template editor.
As an alternative to MailDefinition, have a look at RazorEngine https://github.com/Antaris/RazorEngine.
This looks like a better solution.
Attributted to...
how to send email wth email template c#
E.g
using RazorEngine;
using RazorEngine.Templating;
using System;
namespace RazorEngineTest
{
class Program
{
static void Main(string[] args)
{
string template =
#"<h1>Heading Here</h1>
Dear #Model.UserName,
<br />
<p>First part of the email body goes here</p>";
const string templateKey = "tpl";
// Better to compile once
Engine.Razor.AddTemplate(templateKey, template);
Engine.Razor.Compile(templateKey);
// Run is quicker than compile and run
string output = Engine.Razor.Run(
templateKey,
model: new
{
UserName = "Fred"
});
Console.WriteLine(output);
}
}
}
Which outputs...
<h1>Heading Here</h1>
Dear Fred,
<br />
<p>First part of the email body goes here</p>
Heading Here Dear Fred, First part of the email
body goes here
Emitting handbuilt html like this is probably the best way so long as the markup isn't too complicated. The stringbuilder only starts to pay you back in terms of efficiency after about three concatenations, so for really simple stuff string + string will do.
Other than that you can start to use the html controls (System.Web.UI.HtmlControls) and render them, that way you can sometimes inherit them and make your own clasess for complex conditional layout.
If you don't want a dependency on the full .NET Framework, there's also a library that makes your code look like:
string userName = "John Doe";
var mailBody = new HTML {
new H(1) {
"Heading Here"
},
new P {
string.Format("Dear {0},", userName),
new Br()
},
new P {
"First part of the email body goes here"
}
};
string htmlString = mailBody.Render();
It's open source, you can download it from http://sourceforge.net/projects/htmlplusplus/
Disclaimer: I'm the author of this library, it was written to solve the same issue exactly - send an HTML email from an application.
You might want to have a look at some of the template frameworks that are available at the moment. Some of them are spin offs as a result of MVC but that isn't required. Spark is a good one.
A commercial version which I use in production and allows for easy maintenance is LimiLabs Template Engine, been using it for 3+ years and allows me to make changes to the text template without having to update code (disclaimers, links etc..) - it could be as simple as
Contact templateData = ...;
string html = Template
.FromFile("template.txt")
.DataFrom(templateData )
.Render();
Worth taking a look at, like I did; after attempting various answers mentioned here.