What is the regular expression for all characters except white space , and minimum6 characters.
This is what I have now :
^[\w'?#&#.]{6,}$
But this does not accept all the special characters. And I am using in .net app if that makes any difference
[^\s]{6,}$ should make it. But note the answer above, if you only want to skip the white spaces, you better use [^ ]. The notation [^\s] will ignore any white space character (space, tab or newline).
A .NET regex to match any string that does not contain any whitespace chars (at least 6 occurrences) is
\A\S{6,}\z
See the regex demo online
Do not use $ because it may match before a final \n (LF symbol) inside a string, \z is the most appropriate anchor here as it matches the very end of the string. To make the string compatible with JS (if you use it in ASP.NET for both server and client side validation) you need to use ^\S{6,}$(?!\n).
The \S shorthand character class matches any character other than a Unicode whitespace char (if ECMAScript option is not used).
The {6,} limiting quantifier matches six or more occurrences of the quantified subpattern.
Details
\A - (an unambiguous anchor, its behavior cannot be redefined with any regex options) start of a string
\S{6,} - any 6 or more chars other than a Unicode whitespace char
\z - the very end of the string.
Related
I am trying to build regex to match - Test get:all words:test
can start with a word then space and followed by any occurrence of word:word separated by space.
#"^[a-zA-Z]+/s(^[a-zA-Z]+:^[a-zA-Z]+/s)*"
You added extra start of string anchors, ^, inside the pattern, and you need to remove them for sure.
Besides, the whitespace patterns must be written as \s and the first \s must be moved inside the repeated group that should be converted into a non-capturing one ((?:...)) for better performance.
You can use
^[a-zA-Z]+(?:\s+[a-zA-Z]+:[a-zA-Z]+)*$
See the regex demo. Details:
^ - start of string
[a-zA-Z]+ - one or more ASCII letters
(?:\s+[a-zA-Z]+:[a-zA-Z]+)* - zero or more repetitions of
\s+ - one or more whitespaces
[a-zA-Z]+:[a-zA-Z]+ - one or more ASCII letters, :, one or more ASCII letters
$ - end of string (or use \z to match the very end of string).
If you meant to allow any word chars (letters, digits, connector punctuation) then replace each [a-zA-Z] with \w.
If you need to support just any Unicode letters, replace each [a-zA-Z] with \p{L}.
I already gone through many post on SO. I didn't find what I needed for my specific scenario.
I need a regex for alpha numeric string.
where following conditions should be matched
Valid string:
ameya123 (alphabets and numbers)
ameya (only alphabets)
AMeya12(Capital and normal alphabets and numbers)
Ameya_123 (alphabets and underscore and numbers)
Ameya_ 123 (alphabets underscore and white speces)
Invalid string:
123 (only numbers)
_ (only underscore)
(only space) (only white spaces)
any special charecter other than underscore
what i tried till now:
(?=.*[a-zA-Z])(?=.*[0-9]*[\s]*[_]*)
the above regex is working in Regex online editor however not working in data annotation in c#
please suggest.
Based on your requirements and not your attempt, what you are in need of is this:
^(?!(?:\d+|_+| +)$)[\w ]+$
The negative lookahead looks for undesired matches to fail the whole process. Those are strings containing digits only, underscores only or spaces only. If they never happen we want to have a match for ^[\w ]+$ which is nearly the same as ^[a-zA-Z0-9_ ]+$.
See live demo here
Explanation:
^ Start of line / string
(?! Start of negative lookahead
(?: Start of non-capturing group
\d+ Match digits
| Or
_+ Match underscores
| Or
[ ]+ Match spaces
)$ End of non-capturing group immediately followed by end of line / string (none of previous matches should be found)
) End of negative lookahead
[\w ]+$ Match a character inside the character set up to end of input string
Note: \w is a shorthand for [a-zA-Z0-9_] unless u modifier is set.
One problem with your regex is that in annotations, the regex must match and consume the entire string input, while your pattern only contains lookarounds that do not consume any text.
You may use
^(?!\d+$)(?![_\s]+$)[A-Za-z0-9\s_]+$
See the regex demo. Note that \w (when used for a server-side validation, and thus parsed with the .NET regex engine) will also allow any Unicode letters, digits and some more stuff when validating on the server side, so I'd rather stick to [A-Za-z0-9_] to be consistent with both server- and client-side validation.
Details
^ - start of string (not necessary here, but good to have when debugging)
(?!\d+$) - a negative lookahead that fails the match if the whole string consists of digits
(?![_\s]+$) - a negative lookahead that fails the match if the whole string consists of underscores and/or whitespaces. NOTE: if you plan to only disallow ____ or " " like inputs, you need to split this lookahead into (?!_+$) and (?!\s+$))
[A-Za-z0-9\s_]+ - 1+ ASCII letters, digits, _ and whitespace chars
$ - end of string (not necessary here, but still good to have).
If I understand your requirements correctly, you need to match one or more letters (uppercase or lowercase), and possibly zero or more of digits, whitespace, or underscore. This implies the following pattern:
^[A-Za-z0-9\s_]*[A-Za-z][A-Za-z0-9\s_]*$
Demo
In the demo, I have replaced \s with \t \r, because \s was matching across all lines.
Unlike the answers given by #revo and #wiktor, I don't have a fancy looking explanation to the regex. I am beautiful even without my makeup on. Honestly, if you don't understand the pattern I gave, you might want to review a good regex tutorial.
This simple RegEx should do it:
[a-zA-Z]+[0-9_ ]*
One or more Alphabet, followed by zero or more numbers, underscore and Space.
This one should be good:
[\w\s_]*[a-zA-Z]+[\w\s_]*
I use the following regex, which is working, but I want to add a condition so as to accept spaces at the end of the value. Currently it is not working.
What am I missinghere?
^[a-zA-Z][a-zA-Z0-9_]+\s?$[\s]*$
Assumption: you added the two end of string anchors $ by mistake.
? quantifier, matching one or zero repetitions, makes the previous item optional
* quantifier, matching zero or more repetitions
So change your expression to
^[a-zA-Z][a-zA-Z0-9_]+\s*$
this is matching any amount of whitespace at the end of the string.
Be aware, whitespace is not just the space character, it is also tabs and newlines (and more)!
If you really want to match only space, just write a space or make a character class with all the characters you want to match.
^[a-zA-Z][a-zA-Z0-9_]+ *$
or
^[a-zA-Z][a-zA-Z0-9_]+[ \t]*$
Next thing is: Are you sure you only want plain ASCII letters? Today there is Unicode and you can use Unicode properties, scripts and blocks in your regular expressions.
Your expression in Unicode, allowing all letters and digits.
^\p{L}\w+\s*$
\p{L} Unicode property, any kind of letter from any language.
\w shorthand character class for word characters (letters, digits and connector characters like "_") [\p{L}\p{Nd}\p{Pc}] as character class with Unicode properties. Definition on msdn
why two dollars?
^[a-zA-Z][a-zA-Z0-9_]+\s*$
or make it this :
"^[a-zA-Z][a-zA-Z0-9_]+\s?\$\s*$"
if you want to literally match the dollar.
Try this -
"^[a-zA-Z][a-zA-Z0-9_]+(\s)?$"
or this -
"^[a-zA-Z][a-zA-Z0-9_]+((\s){,})$"
$ indicates end of expression, if you are looking $ as character, then escape it with \
Can any one please explain the regex below, this has been used in my application for a very long time even before I joined, and I am very new to regex's.
/^.*(?=.{6,10})(?=.*[a-zA-Z].*[a-zA-Z].*[a-zA-Z].*[a-zA-Z])(?=.*\d.*\d).*$/
As far as I understand
this regex will validate
- for a minimum of 6 chars to a maximum of 10 characters
- will escape the characters like ^ and $
also, my basic need is that I want a regex for a minimum of 6 characters with 1 character being a digit and the other one being a special character.
^.*(?=.{6,10})(?=.*[a-zA-Z].*[a-zA-Z].*[a-zA-Z].*[a-zA-Z])(?=.*\d.*\d).*$
^ is called an "anchor". It basically means that any following text must be immediately after the "start of the input". So ^B would match "B" but not "AB" because in the second "B" is not the first character.
.* matches 0 or more characters - any character except a newline (by default). This is what's known as a greedy quantifier - the regex engine will match ("consume") all of the characters to the end of the input (or the end of the line) and then work backwards for the rest of the expression (it "gives up" characters only when it must). In a regex, once a character is "matched" no other part of the expression can "match" it again (except for zero-width lookarounds, which is coming next).
(?=.{6,10}) is a lookahead anchor and it matches a position in the input. It finds a place in the input where there are 6 to 10 characters following, but it does not "consume" those characters, meaning that the following expressions are free to match them.
(?=.*[a-zA-Z].*[a-zA-Z].*[a-zA-Z].*[a-zA-Z]) is another lookahead anchor. It matches a position in the input where the following text contains four letters ([a-zA-Z] matches one lowercase or uppercase letter), but any number of other characters (including zero characters) may be between them. For example: "++a5b---C#D" would match. Again, being an anchor, it does not actually "consume" the matched characters - it only finds a position in the text where the following characters match the expression.
(?=.*\d.*\d) Another lookahead. This matches a position where two numbers follow (with any number of other characters in between).
.* Already covered this one.
$ This is another kind of anchor that matches the end of the input (or the end of a line - the position just before a newline character). It says that the preceding expression must match characters at the end of the string. When ^ and $ are used together, it means that the entire input must be matched (not just part of it). So /bcd/ would match "abcde", but /^bcd$/ would not match "abcde" because "a" and "e" could not be included in the match.
NOTE
This looks like a password validation regex. If it is, please note that it's broken. The .* at the beginning and end will allow the password to be arbitrarily longer than 10 characters. It could also be rewritten to be a bit shorter. I believe the following will be an acceptable (and slightly more readable) substitute:
^(?=(.*[a-zA-Z]){4})(?=(.*\d){2}).{6,10}$
Thanks to #nhahtdh for pointing out the correct way to implement the character length limit.
Check Cyborgx37's answer for the syntax explanation. I'll do some explanation on the meaning of the regex.
^.*(?=.{6,10})(?=.*[a-zA-Z].*[a-zA-Z].*[a-zA-Z].*[a-zA-Z])(?=.*\d.*\d).*$
The first .* is redundant, since the rest are zero-width assertions that begins with any character ., and .* at the end.
The regex will match minimum 6 characters, due to the assertion (?=.{6,10}). However, there is no upper limit on the number of characters of the string that the regex can match. This is because of the .* at the end (the .* in the front also contributes).
This (?=.*[a-zA-Z].*[a-zA-Z].*[a-zA-Z].*[a-zA-Z]) part asserts that there are at least 4 English alphabet character (uppercase or lowercase). And (?=.*\d.*\d) asserts that there are at least 2 digits (0-9). Since [a-zA-Z] and \d are disjoint sets, these 2 conditions combined makes the (?=.{6,10}) redundant.
The syntax of .*[a-zA-Z].*[a-zA-Z].*[a-zA-Z].*[a-zA-Z] is also needlessly verbose. It can be shorten with the use of repetition: (?:.*[a-zA-Z]){4}.
The following regex is equivalent your original regex. However, I really doubt your current one and this equivalent rewrite of your regex does what you want:
^(?=(?:.*[a-zA-Z]){4})(?=(?:.*\d){2}).*$
More explicit on the length, since clarity is always better. Meaning stay the same:
^(?=(?:.*[a-zA-Z]){4})(?=(?:.*\d){2}).{6,}$
Recap:
Minimum length = 6
No limit on maximum length
At least 4 English alphabet, lowercase or uppercase
At least 2 digits 0-9
REGEXPLANATION
/.../: slashes are often used to represent the area where the regex is defined
^: matches beginning of input string
.: this can match any character
*: matches the previous symbol 0 or more times
.{6,10}: matches .(any character) somewhere between 6 and 10 times
[a-zA-Z]: matches all characters between a and z and between A and Z
\d: matches a digit.
$: matches the end of input.
I think that just about does it for all the symbols in the regex you've posted
For your regex request, here is what you would use:
^(?=.{6,}$)(?=.*?\d)(?=.*?[!##$%&*()+_=?\^-]).*
And here it is unrolled for you:
^ // Anchor the beginning of the string (password).
(?=.{6,}$) // Look ahead: Six or more characters, then the end of the string.
(?=.*?\d) // Look ahead: Anything, then a single digit.
(?=.*?[!##$%&*()+_=?\^-]) // Look ahead: Anything, and a special character.
.* // Passes our look aheads, let's consume the entire string.
As you can see, the special characters have to be explicitly defined as there is not a reserved shorthand notation (like \w, \s, \d) for them. Here are the accepted ones (you can modify as you wish):
!, #, #, $, %, ^, &, *, (, ), -, +, _, =, ?
The key to understanding regex look aheads is to remember that they do not move the position of the parser. Meaning that (?=...) will start looking at the first character after the last pattern match, as will subsequent (?=...) look aheads.
I want to match any string that does not contain the string "DontMatchThis".
What's the regex?
try this:
^(?!.*DontMatchThis).*$
The regex to match a string that does not contain a certain pattern is
(?s)^(?!.*DontMatchThis).*$
If you use the pattern without the (?s) (which is an inline version of the RegexOptions.Singleline flag that makes . match a newline LF symbol as well as all other characters), the DontMatchThis will only be searched for on the first line, and only a string without LF symbols will be matched with .*.
Pattern details:
(?s) - a DOTALL/Singleline modifier making . match any character
^ - start of string anchor
(?!.*DontMatchThis) - a negative lookahead checking if there are any 0 or more characters (matched with greedy .* subpattern - NOTE a lazy .*? version (matching as few characters as possible before the next subpattern match) might get the job done quicker if DontMatchThis is expected closer to the string start) followed with DontMatchThis
.* - any zero or more characters, as many as possible, up to
$ - the end of string (see Anchor Characters: Dollar ($)).