Related
I've been wrestling with this for a while and can't quite figure out what's happening. I have a Card entity which contains Sides (usually 2) - and both Cards and Sides have a Stage. I'm using EF Codefirst migrations and the migrations are failing with this error:
Introducing FOREIGN KEY constraint 'FK_dbo.Sides_dbo.Cards_CardId' on
table 'Sides' may cause cycles or multiple cascade paths. Specify ON
DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY
constraints.
Here's my Card entity:
public class Card
{
public Card()
{
Sides = new Collection<Side>();
Stage = Stage.ONE;
}
[Key]
[Required]
public virtual int CardId { get; set; }
[Required]
public virtual Stage Stage { get; set; }
[Required]
[ForeignKey("CardId")]
public virtual ICollection<Side> Sides { get; set; }
}
Here's my Side entity:
public class Side
{
public Side()
{
Stage = Stage.ONE;
}
[Key]
[Required]
public virtual int SideId { get; set; }
[Required]
public virtual Stage Stage { get; set; }
[Required]
public int CardId { get; set; }
[ForeignKey("CardId")]
public virtual Card Card { get; set; }
}
And here's my Stage entity:
public class Stage
{
// Zero
public static readonly Stage ONE = new Stage(new TimeSpan(0, 0, 0), "ONE");
// Ten seconds
public static readonly Stage TWO = new Stage(new TimeSpan(0, 0, 10), "TWO");
public static IEnumerable<Stage> Values
{
get
{
yield return ONE;
yield return TWO;
}
}
public int StageId { get; set; }
private readonly TimeSpan span;
public string Title { get; set; }
Stage(TimeSpan span, string title)
{
this.span = span;
this.Title = title;
}
public TimeSpan Span { get { return span; } }
}
What's odd is that if I add the following to my Stage class:
public int? SideId { get; set; }
[ForeignKey("SideId")]
public virtual Side Side { get; set; }
The migration runs successfully. If I open up SSMS and look at the tables, I can see that Stage_StageId has been added to Cards (as expected/desired), however Sides contains no reference to Stage (not expected).
If I then add
[Required]
[ForeignKey("StageId")]
public virtual Stage Stage { get; set; }
public int StageId { get; set; }
To my Side class, I see StageId column added to my Side table.
This is working, but now throughout my application, any reference to Stage contains a SideId, which is in some cases totally irrelevant. I'd like to just give my Card and Side entities a Stage property based on the above Stage class without polluting the stage class with reference properties if possible... what am I doing wrong?
Because Stage is required, all one-to-many relationships where Stage is involved will have cascading delete enabled by default. It means, if you delete a Stage entity
the delete will cascade directly to Side
the delete will cascade directly to Card and because Card and Side have a required one-to-many relationship with cascading delete enabled by default again it will then cascade from Card to Side
So, you have two cascading delete paths from Stage to Side - which causes the exception.
You must either make the Stage optional in at least one of the entities (i.e. remove the [Required] attribute from the Stage properties) or disable cascading delete with Fluent API (not possible with data annotations):
modelBuilder.Entity<Card>()
.HasRequired(c => c.Stage)
.WithMany()
.WillCascadeOnDelete(false);
modelBuilder.Entity<Side>()
.HasRequired(s => s.Stage)
.WithMany()
.WillCascadeOnDelete(false);
I had a table that had a circular relationship with others and I was getting the same error. Turns out it is about the foreign key which was not nullable. If the key is not nullable the related object must be deleted, and circular relations don't allow that. So use nullable foreign key.
[ForeignKey("StageId")]
public virtual Stage Stage { get; set; }
public int? StageId { get; set; }
Anybody wondering how to do it in EF core:
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
foreach (var relationship in modelBuilder.Model.GetEntityTypes().SelectMany(e => e.GetForeignKeys()))
{
relationship.DeleteBehavior = DeleteBehavior.Restrict;
}
..... rest of the code.....
I was getting this error for lots of entities when I was migrating down from an EF7 model to an EF6 version. I didn't want to have to go through each entity one at a time, so I used:
builder.Conventions.Remove<ManyToManyCascadeDeleteConvention>();
builder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
You can set cascadeDelete to false or true (in your migration Up() method). Depends upon your requirement.
AddForeignKey("dbo.Stories", "StatusId", "dbo.Status", "StatusID", cascadeDelete: false);
In .NET Core I changed the onDelete option to ReferencialAction.NoAction
constraints: table =>
{
table.PrimaryKey("PK_Schedule", x => x.Id);
table.ForeignKey(
name: "FK_Schedule_Teams_HomeId",
column: x => x.HomeId,
principalTable: "Teams",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
table.ForeignKey(
name: "FK_Schedule_Teams_VisitorId",
column: x => x.VisitorId,
principalTable: "Teams",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
});
I had this issue also, I solved it instantly with this answer from a similar thread
In my case, I didn't want to delete the dependent record on key deletion. If this is the case in your situation just simply change the Boolean value in the migration to false:
AddForeignKey("dbo.Stories", "StatusId", "dbo.Status", "StatusID", cascadeDelete: false);
Chances are, if you are creating relationships which throw this compiler error but DO want to maintain cascade delete; you have an issue with your relationships.
I fixed this. When you add the migration, in the Up() method there will be a line like this:
.ForeignKey("dbo.Members", t => t.MemberId, cascadeDelete:True)
If you just delete the cascadeDelete from the end it will work.
Just for documentation purpose, to someone that comes on the future, this thing can be solved as simple as this, and with this method, you could do a method that disabled one time, and you could access your method normally
Add this method to the context database class:
protected override void OnModelCreating(DbModelBuilder modelBuilder) {
modelBuilder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
}
In .NET Core I played with all upper answers - but without any success.
I made changes a lot in DB structure and every time added new migration attempting to update-database, but received the same error.
Then I started to remove-migration one by one until Package Manager Console threw me exception:
The migration '20170827183131_***' has already been applied to the database
After that, I added new migration (add-migration) and update-database successfully
So my suggestion would be: clear out all your temp migrations, until your current DB state.
public partial class recommended_books : DbMigration
{
public override void Up()
{
CreateTable(
"dbo.RecommendedBook",
c => new
{
RecommendedBookID = c.Int(nullable: false, identity: true),
CourseID = c.Int(nullable: false),
DepartmentID = c.Int(nullable: false),
Title = c.String(),
Author = c.String(),
PublicationDate = c.DateTime(nullable: false),
})
.PrimaryKey(t => t.RecommendedBookID)
.ForeignKey("dbo.Course", t => t.CourseID, cascadeDelete: false) // was true on migration
.ForeignKey("dbo.Department", t => t.DepartmentID, cascadeDelete: false) // was true on migration
.Index(t => t.CourseID)
.Index(t => t.DepartmentID);
}
public override void Down()
{
DropForeignKey("dbo.RecommendedBook", "DepartmentID", "dbo.Department");
DropForeignKey("dbo.RecommendedBook", "CourseID", "dbo.Course");
DropIndex("dbo.RecommendedBook", new[] { "DepartmentID" });
DropIndex("dbo.RecommendedBook", new[] { "CourseID" });
DropTable("dbo.RecommendedBook");
}
}
When your migration fails you are given a couple of options:
'Introducing FOREIGN KEY constraint 'FK_dbo.RecommendedBook_dbo.Department_DepartmentID' on table 'RecommendedBook' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.
Could not create constraint or index. See previous errors.'
Here is an example of using the 'modify other FOREIGN KEY constraints' by setting 'cascadeDelete' to false in the migration file and then run 'update-database'.
Make your Foreign key attributes nullable. That will work.
This sounds weird and I don't know why, but in my case that was happening because my ConnectionString was using "." in "data source" attribute. Once I changed it to "localhost" it workded like a charm. No other change was needed.
The existing answers are great I just wanted to add that I ran into this error because of a different reason. I wanted to create an Initial EF migration on an existing DB but I didn't use the -IgnoreChanges flag and applied the Update-Database command on an empty Database (also on the existing fails).
Instead I had to run this command when the current db structure is the current one:
Add-Migration Initial -IgnoreChanges
There is likely a real problem in the db structure but save the world one step at a time...
In .NET 5 < and .NET Core 2.0 < you can use .OnDelete(DeleteBehavior.Restrict) in OnModelCreating like #Nexus23 answer but you do not need to disable cascade for every model.
Example with join entity type configuration many-to-many:
internal class MyContext : DbContext
{
public MyContext(DbContextOptions<MyContext> options)
: base(options)
{
}
public DbSet<Post> Posts { get; set; }
public DbSet<Tag> Tags { get; set; }
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
modelBuilder.Entity<Post>()
.HasMany(p => p.Tags)
.WithMany(p => p.Posts)
.UsingEntity<PostTag>(
j => j
.HasOne(pt => pt.Tag)
.WithMany(t => t.PostTags)
.HasForeignKey(pt => pt.TagId)
.OnDelete(DeleteBehavior.Restrict),
j => j
.HasOne(pt => pt.Post)
.WithMany(p => p.PostTags)
.HasForeignKey(pt => pt.PostId)
.OnDelete(DeleteBehavior.Restrict),
j =>
{
j.Property(pt => pt.PublicationDate).HasDefaultValueSql("CURRENT_TIMESTAMP");
j.HasKey(t => new { t.PostId, t.TagId });
});
}
}
public class Post
{
public int PostId { get; set; }
public string Title { get; set; }
public string Content { get; set; }
public ICollection<Tag> Tags { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class Tag
{
public string TagId { get; set; }
public ICollection<Post> Posts { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class PostTag
{
public DateTime PublicationDate { get; set; }
public int PostId { get; set; }
public Post Post { get; set; }
public string TagId { get; set; }
public Tag Tag { get; set; }
}
Sources:
https://learn.microsoft.com/en-us/ef/core/modeling/relationships?tabs=fluent-api%2Cfluent-api-simple-key%2Csimple-key#join-entity-type-configuration
https://learn.microsoft.com/en-us/dotnet/api/microsoft.entityframeworkcore.deletebehavior?view=efcore-5.0
This does require you to remove the many to many relationship yourself or you will receive the following error when you remove a parent entity:
The association between entity types '' and '' has been severed, but
the relationship is either marked as required or is implicitly
required because the foreign key is not nullable. If the
dependent/child entity should be deleted when a required relationship
is severed, configure the relationship to use cascade deletes.
Consider using 'DbContextOptionsBuilder.EnableSensitiveDataLogging' to
see the key values
You can solve this by using DeleteBehavior.ClientCascade instead which will allow EF to perform cascade deletes on loaded entities.
internal class MyContext : DbContext
{
public MyContext(DbContextOptions<MyContext> options)
: base(options)
{
}
public DbSet<Post> Posts { get; set; }
public DbSet<Tag> Tags { get; set; }
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
modelBuilder.Entity<Post>()
.HasMany(p => p.Tags)
.WithMany(p => p.Posts)
.UsingEntity<PostTag>(
j => j
.HasOne(pt => pt.Tag)
.WithMany(t => t.PostTags)
.HasForeignKey(pt => pt.TagId)
.OnDelete(DeleteBehavior.Cascade),
j => j
.HasOne(pt => pt.Post)
.WithMany(p => p.PostTags)
.HasForeignKey(pt => pt.PostId)
.OnDelete(DeleteBehavior.ClientCascade),
j =>
{
j.Property(pt => pt.PublicationDate).HasDefaultValueSql("CURRENT_TIMESTAMP");
j.HasKey(t => new { t.PostId, t.TagId });
});
}
}
public class Post
{
public int PostId { get; set; }
public string Title { get; set; }
public string Content { get; set; }
public ICollection<Tag> Tags { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class Tag
{
public string TagId { get; set; }
public ICollection<Post> Posts { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class PostTag
{
public DateTime PublicationDate { get; set; }
public int PostId { get; set; }
public Post Post { get; set; }
public string TagId { get; set; }
public Tag Tag { get; set; }
}
https://learn.microsoft.com/en-us/dotnet/api/microsoft.entityframeworkcore.deletebehavior?view=efcore-5.0
None of the aforementioned solutions worked for me. What I had to do was use a nullable int (int?) on the foreign key that was not required (or not a not null column key) and then delete some of my migrations.
Start by deleting the migrations, then try the nullable int.
Problem was both a modification and model design. No code change was necessary.
The simple way is to, Edit your migration file (cascadeDelete: true) into (cascadeDelete: false) then after assign the Update-Database command in your Package Manager Console.if it's problem with your last migration then all right. Otherwise check your earlier migration history, copy those things, paste into your last migration file, after that do it the same thing. it perfectly works for me.
You could add this in your DataContext.cs, this works for me...
protected override void OnModelCreating(DbModelBuilder modelBuilder)
{
modelBuilder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
modelBuilder.Conventions.Remove<ManyToManyCascadeDeleteConvention>();
}
I ran into the same problem and stuck for a long. The following steps saved me.
Go through the constraints and change the onDelete ReferentialAction to NoAction from Cascade
constraints: table =>
{
table.PrimaryKey("PK_table1", x => x.Id);
table.ForeignKey(
name: "FK_table1_table2_table2Id",
column: x => x.table2Id,
principalTable: "table2",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
});
I've been wrestling with this for a while and can't quite figure out what's happening. I have a Card entity which contains Sides (usually 2) - and both Cards and Sides have a Stage. I'm using EF Codefirst migrations and the migrations are failing with this error:
Introducing FOREIGN KEY constraint 'FK_dbo.Sides_dbo.Cards_CardId' on
table 'Sides' may cause cycles or multiple cascade paths. Specify ON
DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY
constraints.
Here's my Card entity:
public class Card
{
public Card()
{
Sides = new Collection<Side>();
Stage = Stage.ONE;
}
[Key]
[Required]
public virtual int CardId { get; set; }
[Required]
public virtual Stage Stage { get; set; }
[Required]
[ForeignKey("CardId")]
public virtual ICollection<Side> Sides { get; set; }
}
Here's my Side entity:
public class Side
{
public Side()
{
Stage = Stage.ONE;
}
[Key]
[Required]
public virtual int SideId { get; set; }
[Required]
public virtual Stage Stage { get; set; }
[Required]
public int CardId { get; set; }
[ForeignKey("CardId")]
public virtual Card Card { get; set; }
}
And here's my Stage entity:
public class Stage
{
// Zero
public static readonly Stage ONE = new Stage(new TimeSpan(0, 0, 0), "ONE");
// Ten seconds
public static readonly Stage TWO = new Stage(new TimeSpan(0, 0, 10), "TWO");
public static IEnumerable<Stage> Values
{
get
{
yield return ONE;
yield return TWO;
}
}
public int StageId { get; set; }
private readonly TimeSpan span;
public string Title { get; set; }
Stage(TimeSpan span, string title)
{
this.span = span;
this.Title = title;
}
public TimeSpan Span { get { return span; } }
}
What's odd is that if I add the following to my Stage class:
public int? SideId { get; set; }
[ForeignKey("SideId")]
public virtual Side Side { get; set; }
The migration runs successfully. If I open up SSMS and look at the tables, I can see that Stage_StageId has been added to Cards (as expected/desired), however Sides contains no reference to Stage (not expected).
If I then add
[Required]
[ForeignKey("StageId")]
public virtual Stage Stage { get; set; }
public int StageId { get; set; }
To my Side class, I see StageId column added to my Side table.
This is working, but now throughout my application, any reference to Stage contains a SideId, which is in some cases totally irrelevant. I'd like to just give my Card and Side entities a Stage property based on the above Stage class without polluting the stage class with reference properties if possible... what am I doing wrong?
Because Stage is required, all one-to-many relationships where Stage is involved will have cascading delete enabled by default. It means, if you delete a Stage entity
the delete will cascade directly to Side
the delete will cascade directly to Card and because Card and Side have a required one-to-many relationship with cascading delete enabled by default again it will then cascade from Card to Side
So, you have two cascading delete paths from Stage to Side - which causes the exception.
You must either make the Stage optional in at least one of the entities (i.e. remove the [Required] attribute from the Stage properties) or disable cascading delete with Fluent API (not possible with data annotations):
modelBuilder.Entity<Card>()
.HasRequired(c => c.Stage)
.WithMany()
.WillCascadeOnDelete(false);
modelBuilder.Entity<Side>()
.HasRequired(s => s.Stage)
.WithMany()
.WillCascadeOnDelete(false);
I had a table that had a circular relationship with others and I was getting the same error. Turns out it is about the foreign key which was not nullable. If the key is not nullable the related object must be deleted, and circular relations don't allow that. So use nullable foreign key.
[ForeignKey("StageId")]
public virtual Stage Stage { get; set; }
public int? StageId { get; set; }
Anybody wondering how to do it in EF core:
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
foreach (var relationship in modelBuilder.Model.GetEntityTypes().SelectMany(e => e.GetForeignKeys()))
{
relationship.DeleteBehavior = DeleteBehavior.Restrict;
}
..... rest of the code.....
I was getting this error for lots of entities when I was migrating down from an EF7 model to an EF6 version. I didn't want to have to go through each entity one at a time, so I used:
builder.Conventions.Remove<ManyToManyCascadeDeleteConvention>();
builder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
You can set cascadeDelete to false or true (in your migration Up() method). Depends upon your requirement.
AddForeignKey("dbo.Stories", "StatusId", "dbo.Status", "StatusID", cascadeDelete: false);
In .NET Core I changed the onDelete option to ReferencialAction.NoAction
constraints: table =>
{
table.PrimaryKey("PK_Schedule", x => x.Id);
table.ForeignKey(
name: "FK_Schedule_Teams_HomeId",
column: x => x.HomeId,
principalTable: "Teams",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
table.ForeignKey(
name: "FK_Schedule_Teams_VisitorId",
column: x => x.VisitorId,
principalTable: "Teams",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
});
I had this issue also, I solved it instantly with this answer from a similar thread
In my case, I didn't want to delete the dependent record on key deletion. If this is the case in your situation just simply change the Boolean value in the migration to false:
AddForeignKey("dbo.Stories", "StatusId", "dbo.Status", "StatusID", cascadeDelete: false);
Chances are, if you are creating relationships which throw this compiler error but DO want to maintain cascade delete; you have an issue with your relationships.
I fixed this. When you add the migration, in the Up() method there will be a line like this:
.ForeignKey("dbo.Members", t => t.MemberId, cascadeDelete:True)
If you just delete the cascadeDelete from the end it will work.
Just for documentation purpose, to someone that comes on the future, this thing can be solved as simple as this, and with this method, you could do a method that disabled one time, and you could access your method normally
Add this method to the context database class:
protected override void OnModelCreating(DbModelBuilder modelBuilder) {
modelBuilder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
}
In .NET Core I played with all upper answers - but without any success.
I made changes a lot in DB structure and every time added new migration attempting to update-database, but received the same error.
Then I started to remove-migration one by one until Package Manager Console threw me exception:
The migration '20170827183131_***' has already been applied to the database
After that, I added new migration (add-migration) and update-database successfully
So my suggestion would be: clear out all your temp migrations, until your current DB state.
public partial class recommended_books : DbMigration
{
public override void Up()
{
CreateTable(
"dbo.RecommendedBook",
c => new
{
RecommendedBookID = c.Int(nullable: false, identity: true),
CourseID = c.Int(nullable: false),
DepartmentID = c.Int(nullable: false),
Title = c.String(),
Author = c.String(),
PublicationDate = c.DateTime(nullable: false),
})
.PrimaryKey(t => t.RecommendedBookID)
.ForeignKey("dbo.Course", t => t.CourseID, cascadeDelete: false) // was true on migration
.ForeignKey("dbo.Department", t => t.DepartmentID, cascadeDelete: false) // was true on migration
.Index(t => t.CourseID)
.Index(t => t.DepartmentID);
}
public override void Down()
{
DropForeignKey("dbo.RecommendedBook", "DepartmentID", "dbo.Department");
DropForeignKey("dbo.RecommendedBook", "CourseID", "dbo.Course");
DropIndex("dbo.RecommendedBook", new[] { "DepartmentID" });
DropIndex("dbo.RecommendedBook", new[] { "CourseID" });
DropTable("dbo.RecommendedBook");
}
}
When your migration fails you are given a couple of options:
'Introducing FOREIGN KEY constraint 'FK_dbo.RecommendedBook_dbo.Department_DepartmentID' on table 'RecommendedBook' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.
Could not create constraint or index. See previous errors.'
Here is an example of using the 'modify other FOREIGN KEY constraints' by setting 'cascadeDelete' to false in the migration file and then run 'update-database'.
Make your Foreign key attributes nullable. That will work.
This sounds weird and I don't know why, but in my case that was happening because my ConnectionString was using "." in "data source" attribute. Once I changed it to "localhost" it workded like a charm. No other change was needed.
The existing answers are great I just wanted to add that I ran into this error because of a different reason. I wanted to create an Initial EF migration on an existing DB but I didn't use the -IgnoreChanges flag and applied the Update-Database command on an empty Database (also on the existing fails).
Instead I had to run this command when the current db structure is the current one:
Add-Migration Initial -IgnoreChanges
There is likely a real problem in the db structure but save the world one step at a time...
In .NET 5 < and .NET Core 2.0 < you can use .OnDelete(DeleteBehavior.Restrict) in OnModelCreating like #Nexus23 answer but you do not need to disable cascade for every model.
Example with join entity type configuration many-to-many:
internal class MyContext : DbContext
{
public MyContext(DbContextOptions<MyContext> options)
: base(options)
{
}
public DbSet<Post> Posts { get; set; }
public DbSet<Tag> Tags { get; set; }
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
modelBuilder.Entity<Post>()
.HasMany(p => p.Tags)
.WithMany(p => p.Posts)
.UsingEntity<PostTag>(
j => j
.HasOne(pt => pt.Tag)
.WithMany(t => t.PostTags)
.HasForeignKey(pt => pt.TagId)
.OnDelete(DeleteBehavior.Restrict),
j => j
.HasOne(pt => pt.Post)
.WithMany(p => p.PostTags)
.HasForeignKey(pt => pt.PostId)
.OnDelete(DeleteBehavior.Restrict),
j =>
{
j.Property(pt => pt.PublicationDate).HasDefaultValueSql("CURRENT_TIMESTAMP");
j.HasKey(t => new { t.PostId, t.TagId });
});
}
}
public class Post
{
public int PostId { get; set; }
public string Title { get; set; }
public string Content { get; set; }
public ICollection<Tag> Tags { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class Tag
{
public string TagId { get; set; }
public ICollection<Post> Posts { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class PostTag
{
public DateTime PublicationDate { get; set; }
public int PostId { get; set; }
public Post Post { get; set; }
public string TagId { get; set; }
public Tag Tag { get; set; }
}
Sources:
https://learn.microsoft.com/en-us/ef/core/modeling/relationships?tabs=fluent-api%2Cfluent-api-simple-key%2Csimple-key#join-entity-type-configuration
https://learn.microsoft.com/en-us/dotnet/api/microsoft.entityframeworkcore.deletebehavior?view=efcore-5.0
This does require you to remove the many to many relationship yourself or you will receive the following error when you remove a parent entity:
The association between entity types '' and '' has been severed, but
the relationship is either marked as required or is implicitly
required because the foreign key is not nullable. If the
dependent/child entity should be deleted when a required relationship
is severed, configure the relationship to use cascade deletes.
Consider using 'DbContextOptionsBuilder.EnableSensitiveDataLogging' to
see the key values
You can solve this by using DeleteBehavior.ClientCascade instead which will allow EF to perform cascade deletes on loaded entities.
internal class MyContext : DbContext
{
public MyContext(DbContextOptions<MyContext> options)
: base(options)
{
}
public DbSet<Post> Posts { get; set; }
public DbSet<Tag> Tags { get; set; }
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
modelBuilder.Entity<Post>()
.HasMany(p => p.Tags)
.WithMany(p => p.Posts)
.UsingEntity<PostTag>(
j => j
.HasOne(pt => pt.Tag)
.WithMany(t => t.PostTags)
.HasForeignKey(pt => pt.TagId)
.OnDelete(DeleteBehavior.Cascade),
j => j
.HasOne(pt => pt.Post)
.WithMany(p => p.PostTags)
.HasForeignKey(pt => pt.PostId)
.OnDelete(DeleteBehavior.ClientCascade),
j =>
{
j.Property(pt => pt.PublicationDate).HasDefaultValueSql("CURRENT_TIMESTAMP");
j.HasKey(t => new { t.PostId, t.TagId });
});
}
}
public class Post
{
public int PostId { get; set; }
public string Title { get; set; }
public string Content { get; set; }
public ICollection<Tag> Tags { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class Tag
{
public string TagId { get; set; }
public ICollection<Post> Posts { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class PostTag
{
public DateTime PublicationDate { get; set; }
public int PostId { get; set; }
public Post Post { get; set; }
public string TagId { get; set; }
public Tag Tag { get; set; }
}
https://learn.microsoft.com/en-us/dotnet/api/microsoft.entityframeworkcore.deletebehavior?view=efcore-5.0
None of the aforementioned solutions worked for me. What I had to do was use a nullable int (int?) on the foreign key that was not required (or not a not null column key) and then delete some of my migrations.
Start by deleting the migrations, then try the nullable int.
Problem was both a modification and model design. No code change was necessary.
The simple way is to, Edit your migration file (cascadeDelete: true) into (cascadeDelete: false) then after assign the Update-Database command in your Package Manager Console.if it's problem with your last migration then all right. Otherwise check your earlier migration history, copy those things, paste into your last migration file, after that do it the same thing. it perfectly works for me.
You could add this in your DataContext.cs, this works for me...
protected override void OnModelCreating(DbModelBuilder modelBuilder)
{
modelBuilder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
modelBuilder.Conventions.Remove<ManyToManyCascadeDeleteConvention>();
}
I ran into the same problem and stuck for a long. The following steps saved me.
Go through the constraints and change the onDelete ReferentialAction to NoAction from Cascade
constraints: table =>
{
table.PrimaryKey("PK_table1", x => x.Id);
table.ForeignKey(
name: "FK_table1_table2_table2Id",
column: x => x.table2Id,
principalTable: "table2",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
});
I've been wrestling with this for a while and can't quite figure out what's happening. I have a Card entity which contains Sides (usually 2) - and both Cards and Sides have a Stage. I'm using EF Codefirst migrations and the migrations are failing with this error:
Introducing FOREIGN KEY constraint 'FK_dbo.Sides_dbo.Cards_CardId' on
table 'Sides' may cause cycles or multiple cascade paths. Specify ON
DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY
constraints.
Here's my Card entity:
public class Card
{
public Card()
{
Sides = new Collection<Side>();
Stage = Stage.ONE;
}
[Key]
[Required]
public virtual int CardId { get; set; }
[Required]
public virtual Stage Stage { get; set; }
[Required]
[ForeignKey("CardId")]
public virtual ICollection<Side> Sides { get; set; }
}
Here's my Side entity:
public class Side
{
public Side()
{
Stage = Stage.ONE;
}
[Key]
[Required]
public virtual int SideId { get; set; }
[Required]
public virtual Stage Stage { get; set; }
[Required]
public int CardId { get; set; }
[ForeignKey("CardId")]
public virtual Card Card { get; set; }
}
And here's my Stage entity:
public class Stage
{
// Zero
public static readonly Stage ONE = new Stage(new TimeSpan(0, 0, 0), "ONE");
// Ten seconds
public static readonly Stage TWO = new Stage(new TimeSpan(0, 0, 10), "TWO");
public static IEnumerable<Stage> Values
{
get
{
yield return ONE;
yield return TWO;
}
}
public int StageId { get; set; }
private readonly TimeSpan span;
public string Title { get; set; }
Stage(TimeSpan span, string title)
{
this.span = span;
this.Title = title;
}
public TimeSpan Span { get { return span; } }
}
What's odd is that if I add the following to my Stage class:
public int? SideId { get; set; }
[ForeignKey("SideId")]
public virtual Side Side { get; set; }
The migration runs successfully. If I open up SSMS and look at the tables, I can see that Stage_StageId has been added to Cards (as expected/desired), however Sides contains no reference to Stage (not expected).
If I then add
[Required]
[ForeignKey("StageId")]
public virtual Stage Stage { get; set; }
public int StageId { get; set; }
To my Side class, I see StageId column added to my Side table.
This is working, but now throughout my application, any reference to Stage contains a SideId, which is in some cases totally irrelevant. I'd like to just give my Card and Side entities a Stage property based on the above Stage class without polluting the stage class with reference properties if possible... what am I doing wrong?
Because Stage is required, all one-to-many relationships where Stage is involved will have cascading delete enabled by default. It means, if you delete a Stage entity
the delete will cascade directly to Side
the delete will cascade directly to Card and because Card and Side have a required one-to-many relationship with cascading delete enabled by default again it will then cascade from Card to Side
So, you have two cascading delete paths from Stage to Side - which causes the exception.
You must either make the Stage optional in at least one of the entities (i.e. remove the [Required] attribute from the Stage properties) or disable cascading delete with Fluent API (not possible with data annotations):
modelBuilder.Entity<Card>()
.HasRequired(c => c.Stage)
.WithMany()
.WillCascadeOnDelete(false);
modelBuilder.Entity<Side>()
.HasRequired(s => s.Stage)
.WithMany()
.WillCascadeOnDelete(false);
I had a table that had a circular relationship with others and I was getting the same error. Turns out it is about the foreign key which was not nullable. If the key is not nullable the related object must be deleted, and circular relations don't allow that. So use nullable foreign key.
[ForeignKey("StageId")]
public virtual Stage Stage { get; set; }
public int? StageId { get; set; }
Anybody wondering how to do it in EF core:
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
foreach (var relationship in modelBuilder.Model.GetEntityTypes().SelectMany(e => e.GetForeignKeys()))
{
relationship.DeleteBehavior = DeleteBehavior.Restrict;
}
..... rest of the code.....
I was getting this error for lots of entities when I was migrating down from an EF7 model to an EF6 version. I didn't want to have to go through each entity one at a time, so I used:
builder.Conventions.Remove<ManyToManyCascadeDeleteConvention>();
builder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
You can set cascadeDelete to false or true (in your migration Up() method). Depends upon your requirement.
AddForeignKey("dbo.Stories", "StatusId", "dbo.Status", "StatusID", cascadeDelete: false);
In .NET Core I changed the onDelete option to ReferencialAction.NoAction
constraints: table =>
{
table.PrimaryKey("PK_Schedule", x => x.Id);
table.ForeignKey(
name: "FK_Schedule_Teams_HomeId",
column: x => x.HomeId,
principalTable: "Teams",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
table.ForeignKey(
name: "FK_Schedule_Teams_VisitorId",
column: x => x.VisitorId,
principalTable: "Teams",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
});
I had this issue also, I solved it instantly with this answer from a similar thread
In my case, I didn't want to delete the dependent record on key deletion. If this is the case in your situation just simply change the Boolean value in the migration to false:
AddForeignKey("dbo.Stories", "StatusId", "dbo.Status", "StatusID", cascadeDelete: false);
Chances are, if you are creating relationships which throw this compiler error but DO want to maintain cascade delete; you have an issue with your relationships.
I fixed this. When you add the migration, in the Up() method there will be a line like this:
.ForeignKey("dbo.Members", t => t.MemberId, cascadeDelete:True)
If you just delete the cascadeDelete from the end it will work.
Just for documentation purpose, to someone that comes on the future, this thing can be solved as simple as this, and with this method, you could do a method that disabled one time, and you could access your method normally
Add this method to the context database class:
protected override void OnModelCreating(DbModelBuilder modelBuilder) {
modelBuilder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
}
In .NET Core I played with all upper answers - but without any success.
I made changes a lot in DB structure and every time added new migration attempting to update-database, but received the same error.
Then I started to remove-migration one by one until Package Manager Console threw me exception:
The migration '20170827183131_***' has already been applied to the database
After that, I added new migration (add-migration) and update-database successfully
So my suggestion would be: clear out all your temp migrations, until your current DB state.
public partial class recommended_books : DbMigration
{
public override void Up()
{
CreateTable(
"dbo.RecommendedBook",
c => new
{
RecommendedBookID = c.Int(nullable: false, identity: true),
CourseID = c.Int(nullable: false),
DepartmentID = c.Int(nullable: false),
Title = c.String(),
Author = c.String(),
PublicationDate = c.DateTime(nullable: false),
})
.PrimaryKey(t => t.RecommendedBookID)
.ForeignKey("dbo.Course", t => t.CourseID, cascadeDelete: false) // was true on migration
.ForeignKey("dbo.Department", t => t.DepartmentID, cascadeDelete: false) // was true on migration
.Index(t => t.CourseID)
.Index(t => t.DepartmentID);
}
public override void Down()
{
DropForeignKey("dbo.RecommendedBook", "DepartmentID", "dbo.Department");
DropForeignKey("dbo.RecommendedBook", "CourseID", "dbo.Course");
DropIndex("dbo.RecommendedBook", new[] { "DepartmentID" });
DropIndex("dbo.RecommendedBook", new[] { "CourseID" });
DropTable("dbo.RecommendedBook");
}
}
When your migration fails you are given a couple of options:
'Introducing FOREIGN KEY constraint 'FK_dbo.RecommendedBook_dbo.Department_DepartmentID' on table 'RecommendedBook' may cause cycles or multiple cascade paths. Specify ON DELETE NO ACTION or ON UPDATE NO ACTION, or modify other FOREIGN KEY constraints.
Could not create constraint or index. See previous errors.'
Here is an example of using the 'modify other FOREIGN KEY constraints' by setting 'cascadeDelete' to false in the migration file and then run 'update-database'.
Make your Foreign key attributes nullable. That will work.
This sounds weird and I don't know why, but in my case that was happening because my ConnectionString was using "." in "data source" attribute. Once I changed it to "localhost" it workded like a charm. No other change was needed.
The existing answers are great I just wanted to add that I ran into this error because of a different reason. I wanted to create an Initial EF migration on an existing DB but I didn't use the -IgnoreChanges flag and applied the Update-Database command on an empty Database (also on the existing fails).
Instead I had to run this command when the current db structure is the current one:
Add-Migration Initial -IgnoreChanges
There is likely a real problem in the db structure but save the world one step at a time...
In .NET 5 < and .NET Core 2.0 < you can use .OnDelete(DeleteBehavior.Restrict) in OnModelCreating like #Nexus23 answer but you do not need to disable cascade for every model.
Example with join entity type configuration many-to-many:
internal class MyContext : DbContext
{
public MyContext(DbContextOptions<MyContext> options)
: base(options)
{
}
public DbSet<Post> Posts { get; set; }
public DbSet<Tag> Tags { get; set; }
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
modelBuilder.Entity<Post>()
.HasMany(p => p.Tags)
.WithMany(p => p.Posts)
.UsingEntity<PostTag>(
j => j
.HasOne(pt => pt.Tag)
.WithMany(t => t.PostTags)
.HasForeignKey(pt => pt.TagId)
.OnDelete(DeleteBehavior.Restrict),
j => j
.HasOne(pt => pt.Post)
.WithMany(p => p.PostTags)
.HasForeignKey(pt => pt.PostId)
.OnDelete(DeleteBehavior.Restrict),
j =>
{
j.Property(pt => pt.PublicationDate).HasDefaultValueSql("CURRENT_TIMESTAMP");
j.HasKey(t => new { t.PostId, t.TagId });
});
}
}
public class Post
{
public int PostId { get; set; }
public string Title { get; set; }
public string Content { get; set; }
public ICollection<Tag> Tags { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class Tag
{
public string TagId { get; set; }
public ICollection<Post> Posts { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class PostTag
{
public DateTime PublicationDate { get; set; }
public int PostId { get; set; }
public Post Post { get; set; }
public string TagId { get; set; }
public Tag Tag { get; set; }
}
Sources:
https://learn.microsoft.com/en-us/ef/core/modeling/relationships?tabs=fluent-api%2Cfluent-api-simple-key%2Csimple-key#join-entity-type-configuration
https://learn.microsoft.com/en-us/dotnet/api/microsoft.entityframeworkcore.deletebehavior?view=efcore-5.0
This does require you to remove the many to many relationship yourself or you will receive the following error when you remove a parent entity:
The association between entity types '' and '' has been severed, but
the relationship is either marked as required or is implicitly
required because the foreign key is not nullable. If the
dependent/child entity should be deleted when a required relationship
is severed, configure the relationship to use cascade deletes.
Consider using 'DbContextOptionsBuilder.EnableSensitiveDataLogging' to
see the key values
You can solve this by using DeleteBehavior.ClientCascade instead which will allow EF to perform cascade deletes on loaded entities.
internal class MyContext : DbContext
{
public MyContext(DbContextOptions<MyContext> options)
: base(options)
{
}
public DbSet<Post> Posts { get; set; }
public DbSet<Tag> Tags { get; set; }
protected override void OnModelCreating(ModelBuilder modelBuilder)
{
modelBuilder.Entity<Post>()
.HasMany(p => p.Tags)
.WithMany(p => p.Posts)
.UsingEntity<PostTag>(
j => j
.HasOne(pt => pt.Tag)
.WithMany(t => t.PostTags)
.HasForeignKey(pt => pt.TagId)
.OnDelete(DeleteBehavior.Cascade),
j => j
.HasOne(pt => pt.Post)
.WithMany(p => p.PostTags)
.HasForeignKey(pt => pt.PostId)
.OnDelete(DeleteBehavior.ClientCascade),
j =>
{
j.Property(pt => pt.PublicationDate).HasDefaultValueSql("CURRENT_TIMESTAMP");
j.HasKey(t => new { t.PostId, t.TagId });
});
}
}
public class Post
{
public int PostId { get; set; }
public string Title { get; set; }
public string Content { get; set; }
public ICollection<Tag> Tags { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class Tag
{
public string TagId { get; set; }
public ICollection<Post> Posts { get; set; }
public List<PostTag> PostTags { get; set; }
}
public class PostTag
{
public DateTime PublicationDate { get; set; }
public int PostId { get; set; }
public Post Post { get; set; }
public string TagId { get; set; }
public Tag Tag { get; set; }
}
https://learn.microsoft.com/en-us/dotnet/api/microsoft.entityframeworkcore.deletebehavior?view=efcore-5.0
None of the aforementioned solutions worked for me. What I had to do was use a nullable int (int?) on the foreign key that was not required (or not a not null column key) and then delete some of my migrations.
Start by deleting the migrations, then try the nullable int.
Problem was both a modification and model design. No code change was necessary.
The simple way is to, Edit your migration file (cascadeDelete: true) into (cascadeDelete: false) then after assign the Update-Database command in your Package Manager Console.if it's problem with your last migration then all right. Otherwise check your earlier migration history, copy those things, paste into your last migration file, after that do it the same thing. it perfectly works for me.
You could add this in your DataContext.cs, this works for me...
protected override void OnModelCreating(DbModelBuilder modelBuilder)
{
modelBuilder.Conventions.Remove<OneToManyCascadeDeleteConvention>();
modelBuilder.Conventions.Remove<ManyToManyCascadeDeleteConvention>();
}
I ran into the same problem and stuck for a long. The following steps saved me.
Go through the constraints and change the onDelete ReferentialAction to NoAction from Cascade
constraints: table =>
{
table.PrimaryKey("PK_table1", x => x.Id);
table.ForeignKey(
name: "FK_table1_table2_table2Id",
column: x => x.table2Id,
principalTable: "table2",
principalColumn: "Id",
onDelete: ReferentialAction.NoAction);
});
I am using Entity Framework Core 2.2 to manage a SQL Server database of traded currencies. There are two entities in the model. The first is Currency, which specifies a trade-able currency, and the other is CurrencyPair, which specifies a pair of currencies that can be exchanged for one another.
public class Currency
{
public ulong Id { get; set; }
public string Name {get; set; }
[NotMapped]
public IEnumerable<CurrencyPair> Pairs
{
get { PairsAsBase?.Concat( PairsAsQuote ?? new CurrencyPair[0] ); }
}
public virtual IEnumerable<CurrencyPair> PairsAsBase { get; set; }
public virtual IEnumerable<CurrencyPair> PairsAsQuote { get; set; }
}
public class CurrencyPair
{
public ulong Id { get; set; }
public string Name { get; set; }
public ulong BaseCurrencyId { get; set; }
public ulong QuoteCurrencyId { get; set; }
public virtual Currency BaseCurrency { get; set; }
public virtual Currency QuoteCurrency { get; set; }
}
I would like to constrain the CurrencyPair table to disallow rows from having the same Currency for both BaseCurrency and QuoteCurrency fields. That is, if a specific currency has Id = 1, then a currency pair specifying BaseCurrencyId = 1 and QuoteCurrencyId = 1 would not be allowed.
Here is my DbContext.OnModelCreating implementation:
protected override void OnModelCreating( ModelBuilder modelBuilder )
{
modelBuilder.Entity<Currency>().HasKey(x => x.Id);
modelBuilder.Entity<Currency>().HasAlternateKey(x => x.Name);
modelBuilder.Entity<Currency>()
.HasMany(x => x.PairsAsBase)
.WithOne(x => x.BaseCurrency)
.HasForeignKey(x => x.BaseCurrencyId);
modelBuilder.Entity<Currency>()
.HasMany(x => x.PairsAsQuote)
.WithOne(x => x.QuoteCurrency)
.HasForeignKey(x => x.QuoteCurrencyId);
modelBuilder.Entity<CurrencyPair>().HasKey(x => x.Id);
modelBuilder.Entity<CurrencyPair>()
.HasOne(x => x.BaseCurrency)
.WithMany(x => x.PairsAsBase)
.HasForeignKey(x => x.BaseCurrencyId);
modelBuilder.Entity<CurrencyPair>()
.HasOne(x => x.QuoteCurrency)
.WithMany(x => x.PairsAsQuote)
.HasForeignKey(x => x.QuoteCurrencyId);
}
TL;DR: How can I ensure that two foreign key columns in a table do not both reference the same entity (using Entity Framework Core 2.2)?
AFAIK there is no good way to enforce your rule at the model builder lvl.
The next best thing would be to intercept SQL commands that could generate faulty data through an ef context, but the API isnt mature enough to make this an easy option.
In my opinion, the only options that you have left have no relation whatsoever to EF:
Constrain: Enforce the rule on your DB schema, eg. through a CHECK constraint
Validate: Enforce the rule at domain model level, eg. by intercepting the setters for both properties in the class and validating their values.
Did you try Global query filters, this should help you protect some unwanted to be show up when you query
modelBuilder.Entity<CurrencyPair>().HasQueryFilter(p => p.BaseCurrency != p.QuoteCurrency);
Data will still store in your table but it not show up when you using it.
I have two tables in my database. One is called Users, and the other is called Widgets. The Widgets table represents 3 entities in my code model. One of the entities, Widget, is a parent class for the other two entities, WidgetTypeA and WidgetTypeB. Both WidgetTypeA and WidgetTypeB have navigation properties to the User entity, which is persisted to the Users table in the database. I'm having trouble getting Code First to use the same foreign key for both the WidgetTypeA and WidgetTypeB entities (UserId). Does anyone know how to do this? It seems like it should be a common problem with Table Per Hierarchy mapping.
My entity classes are as follows:
public class Widget
{
public int Id { get; set; }
public string Name { get; set; }
}
class WidgetMap : EntityTypeConfiguration<Widget>
{
public WidgetMap()
{
ToTable("Widgets");
HasKey(w => w.Id);
Property(w => w.Id)
.HasDatabaseGeneratedOption(DatabaseGeneratedOption.Identity);
Property(w => w.Name)
.IsRequired()
.HasMaxLength(75)
.IsUnicode(true);
}
}
public class WidgetTypeA : Widget
{
public int UserId { get; set; }
public virtual User User { get; set; }
public string Color { get; set; }
public int DepthLevel { get; set; }
}
class WidgetTypeAMap : EntityTypeConfiguration<WidgetTypeA>
{
public WidgetTypeAMap()
{
Map(w => w.Requires("WidgetTypeId").HasValue(1));
HasRequired(w => w.User)
.WithMany(u => u.WidgetTypeAs)
.HasForeignKey(w => w.UserId)
.WillCascadeOnDelete(false);
Property(w => w.Color)
.IsOptional()
.IsUnicode(true)
.HasMaxLength(75);
Property(w => w.DepthLevel)
.IsOptional();
}
}
public class WidgetTypeB : Widget
{
public int UserId { get; set; }
public virtual User User { get; set; }
}
class WidgetTypeBMap : EntityTypeConfiguration<WidgetTypeB>
{
public WidgetTypeBMap()
{
Map(w => w.Requires("WidgetTypeId").HasValue(2));
HasRequired(w => w.User)
.WithMany(u => u.WidgetTypeBs)
.HasForeignKey(w => w.UserId)
.WillCascadeOnDelete(false);
}
}
public class User
{
public int Id { get; set; }
public string Username { get; set; }
public int Age { get; set; }
public virtual ICollection<WidgetTypeA> WidgetTypeAs { get; set; }
public virtual ICollection<WidgetTypeB> WidgetTypeBs { get; set; }
}
class UserMap : EntityTypeConfiguration<User>
{
public UserMap()
{
ToTable("Users");
HasKey(u => u.Id);
Property(u => u.Username)
.IsRequired()
.HasMaxLength(75)
.IsUnicode(true);
Property(u => u.Age)
.IsRequired();
}
}
At any rate, I keep getting the error
Invalid column name 'UserId1'
when I try to perform the following operations:
using (var entities = new MyEntities())
{
User u = new User
{
Username = "Frank",
Age = 14
};
entities.Users.Add(u);
entities.SaveChanges();
WidgetTypeA wa1 = new WidgetTypeA
{
Name = "0SDF81",
UserId = u.Id,
DepthLevel = 6
};
entities.WidgetTypeAs.Add(wa1);
entities.SaveChanges();
}
Not sure if this can be fixed or not. I can always specify a second UserId foreign key for the Widgets table, but that seems pointless. Perhaps there's a way to do this using Fluent API?
You cannot map properties defined in different derived entities to the same column. That is limitation in EF. If your WidgetTypeA has UserId property and your WidgetTypeB has UserId property they must be different columns in the database. It should work if you move both UserId and User properties from derived types to the parent Widget type.
I know its a long way late, but hopefully may help other readers.
Although Ladislav was correct that using a mapped Foreign Key is not supported in EF6, I did find a useful workaround.
It is possible to define a computed column specification whose expression simply refers to the original column. Userid in the description above. This can be used as the discriminator for the TPH mapping. With this approach, the column need not be persisted, but can be used for TPH, with the original column being available for use as a foreign key.