I have to pass an Byte array containing an MAC-Address to a C++ Method. Since I don't have much experience with working with c
C++ APIsI don't know how to do this. I've tried to pass the array itself, but got an invalid parameter code as response from the API. I've also tried to create an IntPtr but to no avail.
I know that the problem is that C++ can't handle managed datatypes such as arrays, so I've to create a unmanaged array somehow, I think.
Here is the definition of the C++ Method:
ll_status_t LL_Connect(
ll_intf_t intf,
uint8_t address[6]);
The array in C# is defined the following way:
Byte[] addr = new Byte[6];
Of course, the array is not empty.
For example:
C++
extern "C"
{
__declspec(dllexport) void GetData(uint8_t* data, uint32_t length)
{
for (size_t i = 0; i < length; ++i)
data[i] = i;
}
}
C#
[DllImport("LibName.dll", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Ansi)]
public static extern void GetData([In, Out] [MarshalAs(UnmanagedType.LPArray)] byte[] data, uint length);
And use in C#
byte[] data = new byte[4];
GetData(data, (unit)data.Lenght);
If you have an array fixed length, for example:
C++
extern "C"
{
__declspec(dllexport) void GetData(uint8_t data[6])
{
for (size_t i = 0; i < 6; ++i)
data[i] = i;
}
}
C#
[DllImport("LibName.dll", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Ansi)]
public static extern void GetData([In, Out] [MarshalAs(UnmanagedType.LPArray, SizeConst = 6)] byte[] data);
And use in C#
byte[] data = new byte[6];
GetData(data);
For your case:
[DllImport("LibName.dll", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Ansi)]
public static extern int LL_Connect(byte intf, [In, Out] [MarshalAs(UnmanagedType.LPArray, SizeConst = 6)] byte[] address);
Related
I have been trying to call an API from DLL like below:
[DllImport(#"TELCompress.dll", EntryPoint = "TELMonDecode", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Unicode)]
public static extern int TELMonDecode(ref bool a, ref bool b, byte[] ab, System.IntPtr pDestBuf, int j, int byteCount);
Call from C# code
int returnval = TELMonDecode(ref a, ref b, bytes, destPnt, k, bytesRec);
C++ code in the DLL
__declspec(dllexport) int TELMonDecode(bool *bUnicode, bool *bCompress, BYTE *pSourceBuf, wchar_t* pDestBuf, int pDestBufSize,int byteCount)
{
...
CString decodedMsg = _T("<Empty>");
int erc = DecodeByteStream(bUnicode, bCompress, pSourceBuf, &decodedMsg);
::MessageBox(NULL,L"Decoding byte done",L"Caption",0);
pDestBuf = decodedMsg.GetBuffer();
::MessageBox(NULL,pDestBuf,L"Caption in TELMonDecode",0);
...
}
I have referred to many links here but still I am unable to figure out what wrong I am doing.
Please guide.
Thanks for the comments. It was helpful.
Now the code works as below
C# code
[DllImport(#"TELCompress.dll", EntryPoint = "TELMonDecode", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Unicode)]
public static extern int TELMonDecode(ref bool a, ref bool b, byte[] ab, ref String pDestBuf, int j, int byteCount);
... //Some code here
//Call to the C++ function
int returnval = TELMonDecode(ref a, ref b, bytes, ref receiveStr, k, bytesRec);
C++ code in the TELCompress.dll
__declspec(dllexport) int TELMonDecode(bool *bUnicode, bool *bCompress, BYTE *pSourceBuf, BSTR* pDestBuf, int pDestBufSize,int byteCount)
{
CString decodedMsg = _T("<Empty>");
//Code to copy data in decodedMsg
CComBSTR tempBstrString(decodedMsg.GetBuffer()); //test
tempBstrString.CopyTo(pDestBuf);
.... //Some more code
return 0;
}
And it works, the string is seen in the C# code which was earlier showing an empty string.
Thanks a lot for all valuable feedback and comments.
-Megha
Use BSTR* instead on wchar_t* and you should be able to use ref String at C# side.
I have the following C function that I need to call from C#:
__declspec(dllexport) int receive_message(char* ret_buf, int buffer_size);
I've declared the following on the C# side:
[DllImport("MyCLibrary", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Auto, EntryPoint = "receive_message")]
public static extern int ReceiveMessage([MarshalAs(UnmanagedType.LPStr)]StringBuilder retBuf, int bufferSize);
I'm calling the function like so:
StringBuilder sb = new StringBuilder();
int len = ReceiveMessage(sb, 512);
This works fine with my initial tests where I was receiving "string" messages. But, now I want to receive packed messages (array of chars/bytes). The problem is that the array of chars/bytes will have 0s and will terminate the string so I don't get back the whole message. Any ideas how I can refactor to get array of bytes back?
With jdweng help, I've changed the declaration to:
[DllImport("MyCLibrary", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Auto, EntryPoint = "receive_message")]
public static extern int ReceiveMessage(IntPtr retBuf, int bufferSize);
And, I'm allocating and freeing the memory on the C# side along with marshalling the data.
IntPtr pnt = Marshall.AllocHGlobal(512);
try
{
int len = ReceiveMessage(pnt, 512);
...
byte[] bytes = new byte[len];
Marshal.Copy(pnt, bytes, 0, len);
...
}
finally
{
Marshal.FreeHGlobal(pnt);
}
I called a C++ function named "GenerateCode" in C# to get a pointer to a memory block, (return from a "new" operator ). And after use in C#, the memory block should be released.
But I tried Marshal.FreeHGlobal(), it always throws exception.
And also, I wrote a C++ function to free the memory, it always throws exception too.
I wonder how to do.
C# code
[DllImport("Generate.dll", EntryPoint = "GenerateCode", CharSet = CharSet.Ansi, CallingConvention = CallingConvention.StdCall)]
public static extern IntPtr GenerateCode([MarshalAs(UnmanagedType.LPStr)]string ComputerInfo, string ProductKey);
[DllImport("Generate.dll", EntryPoint = "FreeMemory", CharSet = CharSet.Ansi, CallingConvention = CallingConvention.StdCall)]
public static extern void FreeMemory(IntPtr ptr);
public string GetRegisterCode(string ComputerInfo, string ProductKey)
{
string s = null;
IntPtr ptr = new IntPtr();
ptr = GenerateCode(ComputerInfo, ProductKey);
s = Marshal.PtrToStringAnsi(ptr, CODE_LENGTH);
FreeMemory(ptr);
}
C++ Code:
const int LENGTH = 24;
extern "C" __declspec(dllexport) char* GenerateCode(char* ComputerInfo, char* ProductKey)
{
char* strAsciiName = new char[LENGTH];
return strAsciiName;
}
extern "C" __declspec(dllexport) void FreeMemory(char* ptr)
{
if(ptr != NULL)
{
delete[] ptr;
ptr = NULL;
}
}
Could you guys please help me solve the following issue?
I have a C++ function dll, and it will be called by another C# application.
One of the functions I needed is as follow:
struct DataStruct
{
unsigned char* data;
int len;
};
DLLAPI int API_ReadFile(const wchar_t* filename, DataStruct** outData);
I wrote the following code in C#:
class CS_DataStruct
{
public byte[] data;
public int len;
}
[DllImport("ReadFile.dll", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Unicode)]
private static extern int API_ReadFile([MarshalAs(UnmanagedType.LPWStr)]string filename, ref CS_DataStruct data);
Unfortunately, the above code is not working... I guess that is due to the C++ func takes a pointer-to-pointer of DataStruct, while I just passed a reference of CS_DataStruct in.
May I know how can I pass a pointer-to-pointer to the C++ func? If it is not possible, is there any workaround? (the C++ API is fixed, so changing API to pointer is not possible)
Edit:
Memory of DataStruct will be allocated by c++ function. Before that, I have no idea how large the data array should be.
(Thanks for the comments below)
I used the following test implementation:
int API_ReadFile(const wchar_t* filename, DataStruct** outData)
{
*outData = new DataStruct();
(*outData)->data = (unsigned char*)_strdup("hello");
(*outData)->len = 5;
return 0;
}
void API_Free(DataStruct** pp)
{
free((*pp)->data);
delete *pp;
*pp = NULL;
}
The C# code to access those functions are as follows:
[StructLayout(LayoutKind.Sequential)]
struct DataStruct
{
public IntPtr data;
public int len;
};
[DllImport("ReadFile.dll", CallingConvention = CallingConvention.Cdecl, CharSet = CharSet.Unicode)]
unsafe private static extern int API_ReadFile([MarshalAs(UnmanagedType.LPWStr)]string filename, DataStruct** outData);
[DllImport("ReadFile.dll", CallingConvention = CallingConvention.Cdecl)]
unsafe private static extern void API_Free(DataStruct** handle);
unsafe static int ReadFile(string filename, out byte[] buffer)
{
DataStruct* outData;
int result = API_ReadFile(filename, &outData);
buffer = new byte[outData->len];
Marshal.Copy((IntPtr)outData->data, buffer, 0, outData->len);
API_Free(&outData);
return result;
}
static void Main(string[] args)
{
byte[] buffer;
ReadFile("test.txt", out buffer);
foreach (byte ch in buffer)
{
Console.Write("{0} ", ch);
}
Console.Write("\n");
}
The data is now transferred to buffer safely, and there should be no memory leaks. I wish it would help.
It isn't necessary to use unsafe to pass a pointer to an array from a DLL. Here is an example (see the 'results' parameter). The key is to use the ref attribute. It also shows how to pass several other types of data.
As defined in C++/C:
#ifdef __cplusplus
extern "C" {
#endif
#ifdef BUILDING_DLL
#define DLLCALL __declspec(dllexport)
#else
#define DLLCALL __declspec(dllimport)
#endif
static const int DataLength = 10;
static const int StrLen = 16;
static const int MaxResults = 30;
enum Status { on = 0, off = 1 };
struct Result {
char name[StrLen]; //!< Up to StrLen-1 char null-terminated name
float location;
Status status;
};
/**
* Analyze Data
* #param data [in] array of doubles
* #param dataLength [in] number of floats in data
* #param weight [in]
* #param status [in] enum with data status
* #param results [out] array of MaxResults (pre-allocated) DLLResult structs.
* Up to MaxResults results will be returned.
* #param nResults [out] the actual number of results being returned.
*/
void DLLCALL __stdcall analyzeData(
const double *data, int dataLength, float weight, Status status, Result **results, int *nResults);
#ifdef __cplusplus
}
#endif
As used in C#:
private const int DataLength = 10;
private const int StrLen = 16;
private const int MaxThreatPeaks = 30;
public enum Status { on = 0, off = 1 };
[StructLayout(LayoutKind.Sequential, CharSet = CharSet.Ansi)]
public struct Result
{
[MarshalAs(UnmanagedType.ByValTStr, SizeConst = StrLen)] public string name; //!< Up to StrLen-1 char null-terminated name
public float location;
public Status status;
}
[DllImport("dllname.dll", CallingConvention = CallingConvention.StdCall, EntryPoint = "analyzeData#32")] // "#32" is only used in the 32-bit version.
public static extern void analyzeData(
double[] data,
int dataLength,
float weight,
Status status,
[MarshalAs(UnmanagedType.LPArray, SizeConst = MaxResults)] ref Result[] results,
out int nResults
);
Without the extern "C" part, the C++ compiler would mangle the export name in a compiler dependent way. I noticed that the EntryPoint / Exported function name matches the function name exactly in a 64-bit DLL, but has an appended '#32' (the number may vary) when compiled into a 32-bit DLL. Run dumpbin /exports dllname.dll to find the exported name for sure. In some cases you may also need to use the DLLImport parameter ExactSpelling = true. Note that this function is declared __stdcall. If it were not specified, it would be __cdecl and you'd need CallingConvention.Cdecl.
Here is how it might be used in C#:
Status status = Status.on;
double[] data = { -0.034, -0.05, -0.039, -0.034, -0.057, -0.084, -0.105, -0.146, -0.174, -0.167};
Result[] results = new Result[MaxResults];
int nResults = -1; // just to see that it changes (input value is ignored)
analyzeData(data, DataLength, 1.0f, status, ref results, out nResults);
If you do call native code, make sure your structs are alligned in the memory. CLR does not guarantee alignment unless you push it.
Try
[StructLayout(LayoutKind.Explicit)]
struct DataStruct
{
string data;
int len;
};
More info:
http://www.developerfusion.com/article/84519/mastering-structs-in-c/
This is the signature of the native c method:
bool nativeMethod1
(unsigned char *arrayIn,
unsigned int arrayInSize,
unsigned char *arrayOut,
unsigned int *arrayOutSize);
I have no idea why arrayOutSize is a pointer to unsigned int but not int itself.
This is how I invoke it from C#:
byte[] arrayIn= Encoding.UTF8.GetBytes(source);
uint arrayInSize = (uint)arrayIn.Length;
byte[] arrayOut = new byte[100];
uint[] arrayOutSize = new uint[1];
arrayOutSize[0] = (uint)arrayOut.Length;
fixed (byte* ptrIn = arrayIn, ptrOut = arrayOut)
{
if (nativeMethod1(ptrIn, arrayInSize, ptrOut, arrayOutSize))
{
Console.WriteLine("True");
}
else
{
Console.WriteLine("False");
}
}
and some DllImport code
[DllImport(#"IcaCert.dll", EntryPoint = "CreateCert2", CallingConvention = CallingConvention.Cdecl)]<br>
public unsafe static extern bool CreateCert2WithArrays(
byte* data, uint dataSize,<br>
byte* result, uint[] resultSize);
According to the documentation, native method should return arrayOut fulfilled with the values depending on arrayIn. If its size is less than needed, it returns false. True otherwise. I figured that it's needed 850 elements in arrayOut. So, when I create new byte[100] array, function should return false, but it always returns true. WHY?
You don't need unsafe code and fixed here. The standard P/Invoke marshaller is more than up to the task:
[DllImport(#"IcaCert.dll", EntryPoint = "CreateCert2", CallingConvention = CallingConvention.Cdecl)]
public static extern bool CreateCert2WithArrays(
byte[] arrayIn,
uint arrayInSize,
byte[] arrayOut,
ref uint arrayOutSize
);
byte[] arrayIn = Encoding.UTF8.GetBytes(source);
uint arrayInSize = (uint)arrayIn.Length;
uint arrayOutSize = 0;
CreateCert2WithArrays(arrayIn, arrayInSize, null, ref arrayOutSize);
byte[] arrayOut = new byte[arrayOutSize];
CreateCert2WithArrays(arrayIn, arrayInSize, arrayOut, ref arrayOutSize);
I don't know for sure what the protocol of the function is, but it is normal for such functions to be able to receive NULL if the output array has size 0.
I don't think an array is what you're looking for. It's a pointer to the size of the array, not a pointer to an array of sizes. Try this:
[DllImport(#"IcaCert.dll", EntryPoint = "CreateCert2", CallingConvention = CallingConvention.Cdecl)]
public unsafe static extern bool CreateCert2WithArrays(
byte* data, uint dataSize,
byte* result, ref uint resultSize);
byte[] arrayIn= Encoding.UTF8.GetBytes(source);
uint arrayInSize = (uint)arrayIn.Length;
byte[] arrayOut = new byte[100];
uint arrayOutSize = (uint)arrayOut.Length;
CreateCert2WithArrays (arrayIn, (uint) arrayIn.Length, arrayOut, ref arrayOutSize);
uint[] arrayOutSize = new uint[1];
arrayOut = new byte[(int)arrayOut];
CreateCert2WithArrays (arrayIn, (uint) arrayIn.Length, arrayOut, ref arrayOutSize);