I'm opening SQL connection then running many SQL scripts in it. My program doesn't close connection at any spot but if I call Thread.Abort() then the connection sometimes gets closed (50/50).
The code looks like:
connection.Open();
try
{
// running various SQL script, no one is closing connection
// calling Thread.Abort() at this point
}
catch (ThreadAbortException ex)
{
Thread.ResetAbort();
// connection sometimes has state "Closed" here!!!
new SqlCommand("blahblah", connection).ExecuteNonQuery(); // doesn't work then
}
Why it's happening? What should I do to have it alive until I explicitly close it?
This is call stack when connection is closed:
at SNIReadSyncOverAsync(SNI_ConnWrapper* , SNI_Packet** , Int32 )
at SNINativeMethodWrapper.SNIReadSyncOverAsync(SafeHandle pConn, IntPtr& packet, Int32 timeout)
at System.Data.SqlClient.TdsParserStateObject.ReadSniSyncOverAsync()
at System.Data.SqlClient.TdsParserStateObject.TryReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.TryPrepareBuffer()
at System.Data.SqlClient.TdsParserStateObject.TryReadByte(Byte& value)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption, Boolean shouldCacheForAlwaysEncrypted)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
Related
I tried to use SQL Azure Transient fault handling, but it doesn't seem to work. My Web Service still throws a transient error. Here is my code:
public int ExecuteSqlCmd(string sql, object[] parameters)
{
return (new RetryPolicy<SqlDatabaseTransientErrorDetectionStrategy>(10, TimeSpan.FromSeconds(0.5), TimeSpan.FromSeconds(0.5))).ExecuteAction<int>(() =>
{
return this.Database.ExecuteSqlCommand(sql, sqlParams);
});
}
Every now and then, it still throws this error:
System.Data.Entity.Core.EntityException: An exception has been raised that is likely due to a transient failure. If you are connecting to a SQL Azure database consider using SqlAzureExecutionStrategy. ---> System.Data.SqlClient.SqlException: Transaction (Process ID 84) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption, Boolean shouldCacheForAlwaysEncrypted)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at System.Data.Entity.Infrastructure.Interception.InternalDispatcher`1.Dispatch[TTarget,TInterceptionContext,TResult](TTarget target, Func`3 operation, TInterceptionContext interceptionContext, Action`3 executing, Action`3 executed)
at System.Data.Entity.Infrastructure.Interception.DbCommandDispatcher.NonQuery(DbCommand command, DbCommandInterceptionContext interceptionContext)
at System.Data.Entity.Core.Objects.ObjectContext.ExecuteStoreCommandInternal(String commandText, Object[] parameters)
at System.Data.Entity.Core.Objects.ObjectContext.ExecuteInTransaction[T](Func`1 func, IDbExecutionStrategy executionStrategy, Boolean startLocalTransaction, Boolean releaseConnectionOnSuccess)
at System.Data.Entity.Core.Objects.ObjectContext.<>c__DisplayClass174_0.<ExecuteStoreCommand>b__0()
at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
--- End of inner exception stack trace ---
at System.Data.Entity.SqlServer.DefaultSqlExecutionStrategy.Execute[TResult](Func`1 operation)
...
...
...
Any idea why? I have spent days trying to figure out the solution to this problem.
Thanks
I am trying get the data from database but I am getting this error. I am sure I am missing some simple logic but I couldn't figure out what's wrong with the query as it is working fine directly on DB.
SqlCommand retrievedgeids = new SqlCommand("Select edgeid from Edges where fromIntersection = #fromid and toIntersection = #toid", sqlconnection);
retrievedgeids.Parameters.AddWithValue("#fromid", fromid);
retrievedgeids.Parameters.AddWithValue("#toid", toid);
using (SqlDataReader reader = retrievedgeids.ExecuteReader())
{
while (reader.Read())
{
if (reader["edgeid"] != System.DBNull.Value)
{
edgeids.Add(Convert.ToInt32(reader["edgeid"]));
}
}
}
And this is the error message:
System.Data.SqlClient.SqlException (0x80131904): Incorrect syntax near '='.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption, Boolean shouldCacheForAlwaysEncrypted)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at NewRNG.UpdatedRNG.getalledges() in C:\Users\ssindhu\source\repos\NewRNG\NewRNG\UpdatedRNG.cs:line 148
ClientConnectionId:36446293-901d-49a3-85a7-da73e2acaedd
Error Number:102,State:1,Class:15
Can you help me figure out this issue?
Here is the link to the Microsoft documentation for the Parameter class you are using :
https://learn.microsoft.com/en-us/dotnet/api/system.data.sqlclient.sqlparameter?view=dotnet-plat-ext-5.0
You would need to change your code to something like this :
System.Data.SqlClient.SqlCommand retrievedgeids = new System.Data.SqlClient.SqlCommand("Select edgeid from Edges where fromIntersection = #fromid and toIntersection = #toid", sqlconnection);
System.Data.SqlClient.SqlParameter fromIdParameter = new System.Data.SqlClient.SqlParameter("fromid", SqlDbType.Int);
fromIdParameter.Value = fromId;
retrievedgeids.Parameters.Add(fromIdParameter);
Use Parameters.Add instead of AddWithValue like this:
retrievedgeids.Parameters.Add("#fromid", SqlDbType.Int);
retrievedgeids.Parameters["#fromid"].Value = fromid;
I am sorry before because the title too general. I just wonder how it's happen in this code:
foreach (var item in list)
{
.........
using (SqlCommand cmd = new SqlCommand(#"SELECT some_fields FROM tbl WHERE id=#id", new SqlConnection(db.ConnectionString)))
{
cmd.Connection.Open();
cmd.Parameters.AddWithValue("#id", item.id);
var reader = cmd.ExecuteReader();
while (reader.Read())
{
//do something
}
cmd.Connection.Close();
}
.........
}
Execution timeout happened on the second loop. First loop was no problem. Is there something wrong in this syntax? Please tell me.
Exception thrown at ExecuteReader():
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at HPM_WEB.Areas.InventoryManagementForms.Transaction.OutboundTransaction.InsertOrUpdateDetailOutbound(MOutboundAdviseModel mout, List`1 doutList, SqlConnection connection, SqlTransaction transaction, String message) in F:\MyFolder\..\Transaction.cs:line 444
Thanks in advance
Try increasing the Connection Timeout
// Setting command timeout to 3 Minutes (60*3=180 Seconds)
cmd.CommandTimeout = 60*3;
Do this before ExecuteReader()
How long it takes for your cmd.ExecuteReader(); to execute?
in your connectionstring, you may want to get a try by allowing multiple active resultset.
see if this resolve your issue? like:
<add name="yourDBConn" connectionString="Data Source=yourInstance;Initial Catalog=yourDB;Persist Security Info=True;User ID=user;Password=pwd;Connection Timeout=30;MultipleActiveResultSets=True;" providerName="System.Data.SqlClient" />
A value of 0 indicates no limit (an attempt to execute a command will wait indefinitely).
The default is 30 seconds. if Read requires two network packets, then it has 30 seconds to read both network packets. If you call Read again, it will have another 30 seconds to read any data that it requires.(Here is the problem exist before expiring timeout it is again calling reader )
Solution 1 is increasing the connection timeout or setting the value to Zero. Another Solution might work is use using(var reader = cmd.ExecuteReader();
I am trying to write linq expression that updates all my records and sets their Default field based on id match condition:
m_context.Languages.Update(x =>
new Language {Default = x.LanguageId == _languageId ? true : false}
);
But in that case I am getting an error:
System.Data.SqlClient.SqlException: Ambiguous column name 'LanguageId'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at EntityFramework.Batch.SqlServerBatchRunner.<InternalUpdate>d__15`1.MoveNext()
--- End of inner exception stack trace ---
at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at EntityFramework.Extensions.BatchExtensions.Update[TEntity](IQueryable`1 source, Expression`1 updateExpression)
What I am going wrong? I tried other conditions and it seems it works fine until another field participates in condition:
context.Languages.Update(x => new Language {Default = !x.Default}); //fine
context.Languages.Update(x => new Language {Default = true == true}); //fine
context.Languages.Update(x => new Language {Version = x.Version + 1}); //fine
context.Languages.Update(x => new Language {Default = x.LanguageId == langId}); //error
I'm trying to save 8,000 characters to a SQL Server Express database table, and this may be smaller or larger in the future, and I'm getting an exception saying that the data will be truncated.
I've already set the column to varchar(max) and don't know if there is another setting for the ORM itself.
Any help is appreciated
Update failed: Telerik.OpenAccess.RT.sql.SQLException: String or binary data would be truncated.
The statement has been terminated. ---> System.Data.SqlClient.SqlException: String or binary data would be truncated.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.ExecuteReader(CommandBehavior behavior)
at OpenAccessRuntime.CommandWrapper.ExecuteReader(CommandBehavior behavior)
at Telerik.OpenAccess.Runtime.Logging.LoggingDbCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.ExecuteReader()
at Telerik.OpenAccess.RT.Adonet2Generic.Impl.CommandImp.ExecuteReader()
at Telerik.OpenAccess.RT.Adonet2Generic.Impl.PreparedStatementImp.executeUpdate(Nullable`1 commandTimeout)
--- End of inner exception stack trace ---
at Telerik.OpenAccess.RT.Adonet2Generic.Impl.PreparedStatementImp.executeUpdate(Nullable`1 commandTimeout)
at OpenAccessRuntime.Relational.conn.PooledPreparedStatement.executeUpdate(Nullable`1 commandTimeout)
at OpenAccessRuntime.Relational.RelationalStorageManager.generateUpdates(OID oid, Int32 index, ClassMetaData cmd, PersistGraph graph, Int32[] fieldNos, Boolean haveNewObjects, CharBuf s, BatchControlInfo batchControl, Boolean previousInserts)
Row: GenericOID#bd4840c1 TokenRequest TokenID=ae428dc3-5815-42ac-bbd6-e4a3f8e87132
UPDATE [TokenRequest] SET [PI]=?, [ReqState]=?, [second_message_date]=?, [second_message_j_s_o_n]=?, [TI]=? WHERE [TokenID] = ? AND [ReqState] is null AND [second_message_date]=?
(set event logging to all to see parameter values) Telerik.OpenAccess.RT.sql.SQLException: String or binary data would be truncated.
The statement has been terminated. ---> System.Data.SqlClient.SqlException: String or binary data would be truncated.
The statement has been terminated.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.ExecuteReader(CommandBehavior behavior)
at OpenAccessRuntime.CommandWrapper.ExecuteReader(CommandBehavior behavior)
at Telerik.OpenAccess.Runtime.Logging.LoggingDbCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.ExecuteReader()
at Telerik.OpenAccess.RT.Adonet2Generic.Impl.CommandImp.ExecuteReader()
at Telerik.OpenAccess.RT.Adonet2Generic.Impl.PreparedStatementImp.executeUpdate(Nullable`1 commandTimeout)
--- End of inner exception stack trace ---
at Telerik.OpenAccess.RT.Adonet2Generic.Impl.PreparedStatementImp.executeUpdate(Nullable`1 commandTimeout)
at OpenAccessRuntime.Relational.conn.PooledPreparedStatement.executeUpdate(Nullable`1 commandTimeout)
at OpenAccessRuntime.Relational.RelationalStorageManager.generateUpdates(OID oid, Int32 index, ClassMetaData cmd, PersistGraph graph, Int32[] fieldNos, Boolean haveNewObjects, CharBuf s, BatchControlInfo batchControl, Boolean previousInserts)
#makerofthings7, my best guess about the re-appearance of the error after the fix is that the model and the database are not in synchronous.
It seems that you have modified the table in the storage model in Visual Designer and in order to complete the fix, I would suggest to you to run the Update Database From Model wizard and to transfer the change in the database.
I hope this helps.