Related
I have been working on a .Net Maui app to replace a Python app I built for my company's payroll team. Several previous iterations of this app have allowed me to publish via sideloading. However, I have been unable to publish a new version for a couple of days now.
If I try to publish via sideloading, I get the following error:
MSB4057 The target "_GenerateAppxPackage" does not exist in the
project.
--this error claims to be stemming from line 1 of my .csproj file.
I attempted another route to publish it as an executable file following the answer provided in this stack overflow answer, and received the following error:
C:\User\MyFirstName : general error c1010070: Failed to load and parse the manifest. The system cannot find the file specified.
As well as another error that says looking for the manifest existed with a code 31.
Further up, before that error hits, there is a line that says:
Skipping target "MauiGeneratePackageAppxManifest" because all output
files are up-to-date with respect to input files.
I am running VS 17.4.0 Preview 3.0 on Windows 11. I have tried to roll back my code through git (up to 3 versions back), as well as copying local files into a new project, and I get these same errors every time.
It may also be worth mentioning that my Windows Defender and Windows Malicious Software Removal Tool both updated between when I was last able to publish successfully and when the problem arose. I had also updated Visual Studio, but tried to roll that back and publish, and it received the same errors.
Is there anyone who can help me figure out what is going on here, or point me in the right direction? I can provide code samples if need be, though on a limited basis because this is a private project.
For this, you can refer to document : Publish a .NET MAUI app for Android/IOS/Windows.
Above documents explain the steps to publish android, ios and windows app, respectively.
You can follow the steps step by step. Under normal circumstances, there will be no problem.
I'm running my .NET 4.0 (C#) project in debug mode after I start VS2013. It runs just fine.
The second time I start it from VS, I get the Dialog box that says "Error while trying to run project: Unable to start program C:\path\to\file.exe"
The process is still alive in the Taskmanager when I dismiss the dialog box.
From Windows Explorer, I can run the program just fine. And after closing it, the process is gone too from the Task Manager.
A rebuild doesn't help.
Is this a common problem with a known solution?
I had an issue similar to this and I had to clear the component cache instruction can be found Here.
Hope this helps.
For my case, it cause by Platform target, you could force choose it to x86 or x64 which your project is:
Each Project's Properties > Build > Platform target
As I pointed out also here, the only solution that worked for me was to disable the ConEmu integration:
ConEmu → Settings → Integration → Default term → disable Force ConEmu as default terminal for console applications
Some users reported that it was enough for them to disable the Aggressive mode in that same settings tab; that wasn't the case for me though.
The topic is old, but this might help someone else.
So in my case I made a file in Visual Studio with .cp extension (accidentally deleted the last 'p') this made visual studio just "include" the the file and not mark it as a compilation unit, thus not compiling it, I looked the *.vcxproj file in a text editor and found out about this, so if you open the project file in a notepad or something just find your file at the bottom usually and change from <Item .../> to <ClCompile .../>
I was getting similar errors. I just had to restart visual studio. Sometime couple times a day.
I had a similar error and resolved it by cleaning the solution. Right-click the solution name in Solution Explorer and choose Clean Solution.
I found a solution here:
Please check "Use Managed Compatibility Mode" under Tools|->Options->Debugging->General.
I'm Brazilian, I don't speak English very well. I did this translation on google translator.
I know the topic is old, but it can still help someone.
I had this same problem in the following situation, I have a dual boot computer (linux debian 11 and windows 10). Inside debian, on my NTFS D disk, I created a folder to perform programming tests. After accessing that same folder with windows, I created a new project in visual studio inside that same folder that I had created in linux. The creation of the project went without problems, however when I tried to run the project (F5), I received the same error from this topic. I tried all the solutions I found on the internet, and nothing worked. I gave all permissions to my admin user and it still didn't work. Then I realized that even going straight to the folder where the application's executable was and clicking directly on it, I still received the access denied error message. So, I took the project out of the folder I had created in linux, and it worked. So, what I could conclude, is that because the folder where my project was was created in linux, for some reason, my windows didn't trust this folder, so it didn't allow running executables from inside that folder, even this one executable having been created by visual studio from within windows.
Just simply create a folder name as "projects" in c drive and copy paste the newly created project in it. Run the project by doing clean & Build or Rebuild method . It will work
open the folder which contains the solution in visual studio.
again, open your *.sln file by double clicking it inside the solution explore once opened try running the solution or rebuild the solution. once rebuild gets completed, it will open without error from next time.
My way of solving the error : error while trying to load project : Unable to start program and c:\Path\to\file.exe was simply by
First restart Visual Studio
Click the build icon
Select the rebuild option
Run the Program or Debug the Program
This was a weird one. Going to put what happened to me here because it might happen to someone else. Everything was fine with the app until suddenly after some fairly insignificant code changes I suddenly started getting this error. Visual Studio was compiling the executable just fine. But, the moment I tried to run it (either from Visual Studio or directly) the executable file would be automatically deleted right out of the Debug folder. Super odd--never seen anything like it. I began to get suspicious that perhaps an anti-virus or the OS was somehow identifying a checksum or some signature in the executable as "dangerous". Or perhaps some obscure compilation bug was corrupting the executable. So on a hunch I made another innocuous change (added a couple of lines of code to color code some text in a rich text box) and the problem went away.
I have several MVC4 applications, that when published via a Web Deploy, they don't always write the two files bin\App_global.asax.compiled and bin\App_global.asax.dll. If I publish multiple times it eventually will publish this file.
Without the files the route tables aren't built, and I get a 403.14 error when trying to access any controller functions.
I have this problem in both VS2012 Ultimate Update 4 and VS2013 Ultimate Update 1.
If I run the Publish preview it will generally tell me that it is going to delete both of these files, and if I refresh the preview it will change from delete for those two files to Update.
I faced this problem of missing App_global.asax.compiled and App_global.asax.dll when precompiling an MVC project.
First I thought it had something to do with TeamCity, because it would only fail when building under TeamCity, and not locally (from Visual Studio) or from the Command Prompt on the build server using msbuild.exe.
Turned out to be disk compression turned on for the disk where TeamCity was writing to. Found the pointer to the solution in the comment by Erik Ropez at http://ydie22.blogspot.ch/2008/11/aspnetcompiler-and-missing-compiled.html . Posting here as reference... So, if "Compress this drive to save disk space" is ticked, under Properties for the HardDrive/Directory, try turning it off.
Similar issue I just solved myself.
StackOverflow,
Just wanted to let everyone know that my problem was solved.
This was an issue with a virus scanner scanning the newly created temp directory for precompiling and actually locking the files in question.
So if anyone has issues such as this and is running any antivirus (especially enterprise level):
TLDR:
Check if your antivirus is locking files.
Turn off all compsec scanning utilities and turn on one by one to isolate which is causing problems.
-Burt Beezy
I am working on a WPF, C# 3.0 project, and I get this error:
Error 1 Metadata file
'WORK=- \Tools\VersionManagementSystem\BusinessLogicLayer\bin\Debug
\BusinessLogicLayer.dll' could not be found C:\-=WORK=- \Tools
\VersionManagementSystem\VersionManagementSystem\CSC VersionManagementSystem
This is how I reference my usercontrols:
xmlns:vms="clr-namespace:VersionManagementSystem"
<vms:SignOffProjectListing Margin="5"/>
It happens after every failed build. The only way I can get the solution to compile is to comment out all my user controls and re-build the project, and then I uncomment the usercontrols and everything is fine.
I have checked build orders and dependencies configurations.
As you can see, it seems to have truncated the DLL file's absolute path... I have read that there is a bug with the length. Is this a possible problem?
It's very annoying and having to comment, build, and uncomment, the build is becoming extremely tiresome.
I just had the same problem. Visual Studio isn't building the project that's being referenced.
Written Instructions:
Right click on the solution and click Properties.
Click Configuration on the left.
Make sure the check box under "Build" for the project it can't find is checked. If it is already checked, uncheck, hit apply and check the boxes again.
(Optional) You had to do it for both Release and Debug modes on the solution properties.
Screen capture Instructions:
They say a picture is worth a thousand words. Click on the GIF to zoom in, and hopefully it will be easy to follow:
This can still happen in newer versions of Visual Studio (I just had it happen on Visual Studio 2013):
Another thing to try is to close Visual Studio and delete the .suo file that is next to the .sln file. (It will be re-generated the next time you Save all (or exit Visual Studio)).
I've had this problem when adding new projects to the solution on another machine and then pulling the revisions in, but the .suo file can be corrupted in other cases as well and lead to very strange Visual Studio behaviour, so deleting it is one of the things I always try.
Note that deleting the .suo file will reset the startup project(s) of the solution.
More on the .suo file is here.
The suggested answer did not work for me. The error is a decoy for another problem.
I found out that I was targeting a slightly different version of .NET and this was flagged as a warning by the compiler, but it was causing building to fail.
This should have been flagged as an error and not a warning.
Well, my answer is not just the summary of all the solutions, but it offers more than that.
Section (1):
In general solutions:
I had four errors of this kind (‘metadata file could not be found’) along with one error saying 'Source File Could Not Be Opened (‘Unspecified error ‘)'.
I tried to get rid of ‘metadata file could not be found’ error. For that, I read many posts, blogs, etc. and found these solutions may be effective (summarizing them over here):
Restart Visual Studio and try building again.
Go to 'Solution Explorer'. Right click on Solution. Go to Properties. Go to 'Configuration Manager'. Check if the checkboxes under 'Build' are checked or not. If any or all of them are unchecked, then check them and try building again.
If the above solution(s) do not work, then follow sequence mentioned in step 2 above, and even if all the checkboxes are checked, uncheck them, check again and try to build again.
Build Order and Project Dependencies:
Go to 'Solution Explorer'. Right click on Solution. Go to 'Project Dependencies...'. You will see two tabs: 'Dependencies' and 'Build Order'. This build order is the one in which solution builds. Check the project dependencies and the build order to verify if some project (say 'project1') which is dependent on other (say 'project2') is trying to build before that one (project2). This might be the cause for the error.
Check the path of the missing .dll:
Check the path of the missing .dll. If the path contains space or any other invalid path character, remove it and try building again.
If this is the cause, then adjust the build order.
Section (2):
My particular case:
I tried all the steps above with various permutations and combinations with restarting Visual Studio a few times. But, it did not help me.
So, I decided to get rid of other error I was coming across ('Source File Could Not Be Opened (‘Unspecified error ‘)').
I came across a blog post: TFS Error–Source File Could Not Be Opened (‘Unspecified error ‘)
I tried the steps mentioned in that blog post, and I got rid of the error 'Source File Could Not Be Opened (‘Unspecified error ‘)' and surprisingly I got rid of other errors (‘metadata file could not be found’) as well.
Section (3):
Moral of the story:
Try all solutions as mentioned in section (1) above (and any other solutions) for getting rid of the error. If nothing works out, as per the blog mentioned in section (2) above, delete the entries of all source files which are no longer present in the source control and the file system from your .csproj file.
In my case it was caused by a .NET Framework version mismatch.
One project was 3.5 and the other referencing project 4.6.1.
Visual Studio 2019 this worked for me:
Close Visual Studio
Delete the hidden .vs folder
Reopen Visual Studio and rebuild the solution.
Closing and reopening Visual Studio 2013 worked for me!
Well, nothing in the previous answers worked for me, so it got me thinking about why am I clicking and hoping when as developers we should really try to understand what is going on here.
It seemed obvious to me that this incorrect meta data file reference must be held somewhere.
A quick search of the .csproj file showed the guilty lines. I had a section called <itemGroup> that seemed to be hanging onto the old incorrect filepath.
<ItemGroup>
<ProjectReference Include="..\..\..\MySiteOld\MySite.Entities\MySite.Entities.csproj">
<Project>{5b0a347e-cd9a-4746-a3b6-99d6d010a6c2}</Project>
<Name>Beeyp.Entities</Name>
</ProjectReference>
...
So a simple fix really:
Backup your .csproj file.
Find the incorrect paths in the .csproj file and rename appropriately.
Please make sure you backup your old .csproj before you fiddle.
In my case, I have my installed directory in mistaken ways.
If your solution path is something like "My Project%2c Very Popular%2c Unit Testing%2c Software and Hardware.zip", it cannot resolve the metadata file, perhaps we should prevent some invalid words like %2c.
When a repository is cloned from certain sites, the directory name is URL encoded. Which would convert space characters in directory names to %20, forward slashes to %2f, underscores to %5f, etc. Although, I'm not sure why the % symbol is breaking things.
Renaming the path into a normal name resolved my issue.
I also met this problem. Firstly you have to manually build you DLL project, by right-click, Build. Then it will work.
In my case, the problem was caused by a simple build error,
error CS0067: The event 'XYZ' is never used
that, for any reason, did not show up in the error window.
Because of that, the Visual Studio build system seemed to miss the error and tried to build dependent projects, which in turn failed with the annoying metadata message.
The recommendation is -as stupid as it may sound-:
First look at your Output Window!
It took me half an hour before this idea hit me...
I got the same error "Metadata file '.dll' could not be found", and I tried several things described above, but the reason for the error was that I was referencing third-party DLL file which was targeting a .NET version higher that my project target .NET version. So the solution was to change the target framework of my project.
I added a new project to my solution and started getting this.
The reason? The project I brought in was targeting a different .NET framework (4.6 and my other two were 4.5.2).
For me, it was trying to find a DLL in a path that used to contain the Project, but we'd moved it to a new directory. The Solution had the correct path to the Project, but Visual Studio somehow kept looking in the old location.
Solution: Rename each problem Project - just add a character or whatever - then rename it back to its original name.
This must reset some global cache of some kind in Visual Studio, because this clears both this issue up and several like it, while things like Clean do not.
It looks like such kind of errors related to the fact that Visual Studio doesn't provide correct information about an error. The developer doesn't even understand the reason for the failed build. It can be a syntax error or something else. In common, to solve such problems you should find the root of the problem (for example, look at the build log).
In my case the problem was in fact that the Error List window didn't show any errors. But really there were syntax errors; I found these errors in the Output window, and after fixing them, the problem was solved.
For me it occurred when I included a new project to a solution.
Visual Studio automatically selects .NET framework 4.5.
I changed to version .NET 4.5.2 like the other libraries, and it worked.
If you have a space in your solution name, this will also cause the issue. Removing the space from your solution name, so path doesn't contain %20 will solve this.
Coming back to this a few years later, this problem is more than likely related to the Windows maximum path limit:
Naming Files, Paths, and Namespaces, Maximum Path Length Limitation
For me the following steps worked:
Find the project that is not building
Remove/add references to projects within the solution.
I was pulling my hair out with this problem also, but after trying the previous answers the only thing that worked for me was to open each project in my solution 1 by 1 and build them individually.
Then I closed Visual Studio 2013, reopened my solution and it compiled fine.
It's strange, because if I clicked each project in my Solution Explorer and tried to build them that way, they all failed. I had to open them alone in their own solutions.
In my case the issue was that I'd manually deleted a non-compilation file which was marked as "missing". Once I deleted the reference to the now-missing file and recompiled - all was well.
My instance of the problem was caused by a common project that had a duplicate class name in it (under a different filename). It is strange that Visual Studio could not detect that and instead just blew up the build process.
I got this problem in Visual Studio 2012 in a solution that had many projects. Rebuilding each project in the solution manually in the same order as the Project Build Order (right-click and rebuild in Solution Explorer) fixed it for me.
Eventually I got to one that gave me a compile error. I fixed the error, and the solution would build correctly after that.
I too had the same error. It hides as in the below path.
The path which I referred to for the DLL file is like "D:\Assemblies Folder\Assembly1.dll".
But the original path in which the assembly referred was "D:\Assemblies%20Folder\Assembly1.dll".
Due to this path name variation, the assembly could not be retrieved from its original path and hence throws the "Metadata not found" error.
The solution is in Stack Overflow question How do I replace all the spaces with %20 in C#?.
Most of the methods explained here did not solved the problem for me.
Finally, I fixed the problem by applying the following steps:
1. Close Visual Studio.
2. Delete all the contents in the bin folders of each project.
3. Open solution and rebuild.
I hit and solved this problem today on VS2022 in a solution with a Blazor project.
The underlying problem is that I had introduced a routine C# compilation error
in C# code declared in a .razor file. VS2022 was dropping the display of the error from the Build Error List tab. I found the C# error by scanning the build output in the Output console log tab where my C# error was described as expected.
p.s. In case you are wondering, I had a Unit Test project referencing my Blazor web project. The project DLL reference from the Unit Test project to the Blazor app was complaining about the missing Blazor DLL.
Based on the error message I don't believe the file path is being truncated. It looks to just be incorrect. If I'm reading the message correctly it appears to be looking for the DLL file at ...
WORK=-\Tools\VersionManagementSystem\BusinessLogicLayer\bin\Debug\BusinessLogicLayer.dll
This is not a valid path. Is it possible that you have a macro definition in the build process set to an invalid value?
I'd faced the same problem. In my case I'd referenced to a class library project with higher .Net version than my project and VS failed to build the project and raised the same error you posted.
I simply set .Net version of my class library project(the one that had broken the build) identical to the .Net version of referenced project and problem solved.
Just pointing out the blatantly obvious: if you don't have "Show output window when build starts" enabled, make sure you're noticing if your build is failing (small "build failed" error in lower left)!!!!
I had this error when I was trying to publish a web application. Turned out that one of a class properties was wrapped into
#if DEBUG
public int SomeProperty { get; set; }
#endif
but the property usage was not. The publishing was done in Release configuration without the DEBUG symbol, obviously.
I'm working on a moderately sized WebForms project. Due to the peculiarities of management here, I have to upload the site to a remote server in order to test (no localhost testing). I'm using the 'Publish' command in Visual Studio 2008. Sometimes, it even works. Most of the time, I inexplicably get a "publish failed" in the bottom left corner, with no further details.
The few googled articles/forum posts I read suggested making the target local folder for the publish operation readable/writable for everyone. Doesn't help.
Is there are way to get further details as to WHY a publish fails in VS2008, and if not, is there a better way of doing these deployments? I'm spending more time building/pushing to the web server than actually debugging.
It's worth checking the output window. I've just had a publish fail because I had deleted an image outside of VS so VS was complaining that the image couldn't be found, but this information was only displayed in the output window.
See this link for more information:
http://ericfickes.com/2009/08/find-out-why-visual-studios-publish-fails/
It happens to us when there is an error in markup (!). Bad thing is that VS will just swallow the error and just tell you Failed.
What I suggest is to run your publish from command line using MSBuild. It's not that straightforward but it works (once you get into it).
I've since discovered that the reason for these particular publish failures was due the "Delete Existing Files" option being checked. Using Visual Studio 2008 under a non-administrative account on Windows Vista could cause a permissions error while attempting to delete the existing files. The publish would fail silently after encountering a file that Visual Studio had insufficient access to delete. Once the files were deleted manually outside of Vidual Studio, the publish functioned normally.
I have not had this issue with Windows 7; I assume the UAC changes in Windows 7 fixed the problem.
I mostly work with Web Forms, and I encounter this problem daily.
It seems to me that publish fails when it fails to delete a file it is trying to replace. Even if I don't have any files open, it still fails sometimes. Not sure why.
Not only VS publish fails very often, it is painfully slow as well.
I just publish to empty local directory and use separate FTP client to upload files. It's more work, but works.
This is probably not the case for you, but I've seen this happen when I'm publishing a web site. If the app_offline.htm file is not excluded from your project (if you use this file), the publish will fail.
Same happened to me.. what I did was include images files that was not included in the project and delete images that were not used.
After struggling with a similar issue for about 30 mins with no clue as to what was causing it closed down VS and reopened my project. Started working fine. No idea why but it worked.
You should always stop the IIS instance running on the machine your are publishing to. Google the word "iisreset". Other hosting providers like DiscountAsp and Arvixe offer you tools to "Stop" and "Start" your app pool on their IIS remotely. This is very necessary because IIS may have locked some files as "in use", so your publish fails when it tries to write over them. When your publish is complete, then just restart IIS (or press "Start" from a web tool if you're using a 3rd party hosting provider).
When all else fails, check your "Output" window (the tab to the right of your "Error List" at the bottom of Visual Studio). Scroll through all of it after a failed publish and look for anything that says "Unable to add". If you keep seeing the same "Unable to add" errors on the same publish, then ftp into the folder, delete the the problematic files manually, and try publishing again.
I got this when my ProjectName.Publish.xml file was read-only. Once I checked the file out of source control, I no longer got the error and could publish.
Just to add to this thread, I found that, for some bizarre reason, only the Mercurial files were being published to the server, everything else just wasn't being copied across.
Another strange thing was that only the Debug configuration was available; Release was nowhere to be seen.
After reading other threads around S.O., I found that there were many for VS 2010 and 2012, but not much to cover the same problem with 2008.
The fix, I found, was to delete the [solution].suo file and then attempt a publish. That seemed to do the job, though it took a long time to complete.
What I found and work in my case. It is to use a different version of VS.
I recently had the problem, the solution works perfectly in VS2015 build, compile and tested.
However, when I try to publish was failing silently.
So, I closed the solution and open it with VS2017 that use the same file structure for the projects/solutions. Then rebuild it and publish without any problems.
I believe it could be VS related and it is complicated to debug.
This is a workaround if you work with multiple Vs instances in your local machine.