I want to save my level files to .json files in the Unity assets folder. Due to the limited features of JsonUtility I want to use Json.NET. I use Linux so I can't access Visual Studio and use Visual Studio Code instead. I wanted to add the package to my Unity project and took the guide from here
Install a Nuget package in Visual Studio Code
First I used this command in the terminal
dotnet add package Newtonsoft.Json
but I got this error
error: Error while adding package 'Newtonsoft.Json' to project
'/.../myUnityProject/Assembly-CSharp.csproj'. The project does not
support adding package references through the add package command.
After that I installed the Nuget extension and installed Newtonsoft.Json#12.0.2 to my project. I was prompted to run dotnet restore to be able to use the package.
After doing so I got this error
MSBUILD : error MSB1011: Specify which project or solution file to use
because this folder contains more than one project or solution file.
So what is the correct way to install third party tools using Visual Studio Code with Unity?
Unfortunately, due to Unity3D's heavy-handed manipulation of SLN files, it is not possible to use NuGet packages within a Unity project.
In the case of Newtonsoft.Json, it is available on the Asset Store for free, you can install from there.
Other packages can be used manually by downloading the .nupkg file from the NuGet website, extracting the DLLs for .NET 4.x, and placing them in your project's Assets folder.
If the library contains native code, you might not be able to use it on every platform, however. But if you get per-platform DLLs, you can set them up in the Unity editor to only be used for the correct platforms.
I am trying to open the UWP project but however because of versioning issue I am not able to load the project. It gives me following error.
However, this version is already installed and even I have tried to install it again. But even after that is again giving me the same error.
I have updated the project version in .csproj file also as below. The version which is mentioned in the screenshot is already installed.
<TargetPlatformVersion>10.0.16299.91</TargetPlatformVersion>
<TargetPlatformMinVersion>10.0.16299.15</TargetPlatformMinVersion>
After doing all this it still gives the error as Visual Studio Update Required.
Any help on this appreciated!
Don't try to target your project to 10.0.16299.91 from your csproj, you can specific the target version to 10.0.16299.0 as Jet suggested. The build version is different from target version.
Thinking about this, if your customer is on 10.0.16299.0, then he cannot use your app? This is not reasonable. By the way, when you load your project, it will asks you to retarget your project, you can find the supported target version listed there.
I have a large project that has about a dozen dependencies. I have tried to install them all but ran into an error from VS. I am using Visual Studio 2015
"An error occurred while trying to restore packages: Unable to find version '3.0.3.1' of package'Lucene.Net.Core'."
Now I have a solution which I can use that is by the same name as this package, but VS refuses to let me updates, remove, or change ANYTHING related to these packages and asks that I restore the packages. I am entirely lost here friends, what should I do?
P.S. the two sources I am using for my package sources are:
https://www.nuget.org/api/v2/
https://www.nuget.org/api/v2/curated-feeds/microsoftdotnet/
The same error occurs for Lucene.Net.Contrib, pstsdk.net, and various packages.
One thing to check for is if your project is built on a version of the NET framework that is less than or equal to the target framework the package has.
If your project is a NET 4.5 based project, but the nuget package has a NET 4.5.2... then the package manager will error out.
"An error occurred while trying to restore packages: Unable to find version '3.0.3.1' of package'Lucene.Net.Core'."
When I use the packages sources which you provided, I found that only two versions (4.8.0 & 4.9.0) of package"Lucene.Net.Core" not have the version '3.0.3.1'.
Pay Attention:
I noticed that the author of this package have updated this package at March 11, 2017(3/11/2017), and only release the version 4.8.0 & 4.9.0. So this must be the reason for NuGet restore failed.
Besides, you said:
I have a solution which I can use that is by the same name as this
package, but VS refuses to let me updates, remove, or change ANYTHING
related to these packages
If you want to remove those error packages, you can try to use below command to force uninstall those packages:
Uninstall-Package Lucene.Net.Core -Force
Or you can delete this package from the package folder and delete the package list from the package.config.
Then install the correct version of the packages.
Although I was not able to get any of the posted answers to work, I ended up removing the project entirely and reinstalling VS, my project, and its dependencies. This ended up working.
Another thing to check is that the package manager configuration settings in visual studio list the public nuget feed (and if the feed is enabled too).
An update occurred last night and now I find myself unable to do a ctrl + '.' for code suggestions in VS 2015. An error message comes up saying the following:
Could not load file or assembly 'Microsoft.CodeAnalysis, version= 1.3.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
I can still build and develop but this will be really annoying without this feature. I admit it, I am getting soft!
Anyone have a suggestion for fixing this bug?
As pointed out by #CaptainAmerica the solution is to update the CodeDom assembly from NuGet. One should point out how to do this in Visual Studio.
I found the solution here:
https://www.nuget.org/packages/Microsoft.CodeDom.Providers.DotNetCompilerPlatform/
Basically, in the Visual Studio menu select:
Tools-> Nuget Package Manager -> Package Manager Console
In the console that appears at the bottom of Visual Studio run this command:
Install-Package Microsoft.CodeDom.Providers.DotNetCompilerPlatform
If any of the options doesn't work, here is the detailed guide to handle this scenario....
First of all version is important. Notice the version mentioned in the error...
Could not load file or assembly 'Microsoft.CodeAnalysis, version= 1.3.1.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
If you see above error it means that it's not able to find version 1.3.1. Now please create new VS project. No preferences, it can be just simple console application. Now once project template is ready, go to Package Manager and run following command with your specified version...
Install-Package Microsoft.CodeAnalysis -Version 1.3.1
This will install all packages. Let it complete. Once it's done. We don't need this newly created project at all. You can delete it completely. Seriously! you can delete it. We did this because we wanted that package installed at global nuget level. When you install something, nuget stores it at global level of your machine as well. Path will be something like this...
C:\Users\<<Your Windows User>>\.nuget\packages
You can know your path by following...
%USERPROFILE%\.nuget\packages
Now you will see your required Microsoft.CodeAnalysis.dll there in following folder...
C:\Users\<<Your Windows User>>\.nuget\packages\Microsoft.CodeAnalysis.Common\1.3.1\lib\net45
Please note that above path contains version number (1.3.1). If your version is different, look into that version folder.
Now that you have dll with you, all that you need to do is add that dll to GAC. For that you will need GacUtil.exe
This file get installed along with Visual Studio already. You can search "GacUtil" in C drive. For me it's there on below path...
C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.6.1 Tools
Now run command prompt as Administrator and navigate current directory to your path containing GacUtil. The run below command to install that dll in GAC.
gacutil
-i C:\Users\<<You Windows User>>\.nuget\packages\Microsoft.CodeAnalysis.Common\1.3.1\lib\net45\Mi
crosoft.CodeAnalysis.dll
Basically providing path to dll we installed globally. It will show message on successful installation.
That's all! Now start your Visual Studio again and you will get this issue fixed.
I had the same problem with Visual Studio 2015 Update 2, to solve the problem globally for all solutions, update to Visual Studio 2015 Update 3. Here is a link: Download from here
I found this page and at the bottom of the page under "Compatibility with ASP.NET" it says that ASP.NET uses the nuget package Microsoft.CodeDom.Providers.DotNetCompilerPlatform to update the Microsoft.CodeAnalysis assemblies. So I updated the DotNetCompilerPlatform package from 1.0.0 to 1.0.3 and it works again! Yeah, life is good again!
To solve this problem for all solutions, I needed to install the assembly Microsoft.CodeAnalysis.dll directly to the GAC – Global Assemblies Cache.
I got the file Microsoft.CodeAnalysis.dll from C:/Users/[user]/.nuget/packages/Microsoft.CodeAnalysis.Common/1.3.2/lib/portable-net45+win8/Microsoft.CodeAnalysis.dll.
To install the assembly to the GAC, I used a PowerShell script from https://github.com/LTruijens/powershell-gac.
Finally, I managed to install the assembly to the GAC with the following command from PowerShell:
Add-GacAssembly [myPath]\Microsoft.CodeAnalysis.dll
I was also facing same issue. My visual studio 2015 version was 2.0. I upgraded it to version 3.
Issue got solved !!!
I was also facing same issue, Try installing Microsoft.CodeAnalysis.CSharp nuget package. And if its not resolved, check version of Microsoft.Net.Compilers in your project, I was having version as 1.0.0 which was causing issue so updated Microsoft.Net.Compilers nuget to v1.3.2.
Found solution here : Github discussion
I have solved the problem this way:
Update Visual studio 2015 to Update 3
from the menu chose View => Notifications => Visual Studio Update 3 and clicked the update button.
Today ! i got the same problem and i resolve it by restarting visual studio 2015 :)
I encountered this issue when trying to build someone's code from github.
I was opening it in VS 2019 but I also have VS 2022. Opening and building in VS 2022 just worked.
I fixed this issue by updating all Nuget Microsoft dependencies to v2.0.0. This was using VS 2017. I was using a preview version.
In my case, the error occurred after turning off Live Unit Testing and running tests manually.Some tests would fail with the above error message.
Going into Test --> Live Unit Testing --> Options and issuing "Delete Persisted Data" resolved the problem.
I fixed similar issue by deleting the .vs folder located inside the solution.
I found the missing assemblies in the NuGet package (After the first one was resolved there were mulitple otheres): https://www.nuget.org/packages/Microsoft.Net.Compilers/1.3.1-rc
Installed them using GacUtil from the Dev console.
Unfortunately the extensive solution with "nuget install/gacutil" here above couldn't work as the exact version of the dependency dll was not available.
The following solved my issue in our complex webform application was to perform within the solution in Visual Studio -> Tools -> Nuget -> console package manager
Update-Package -reinstall
In my case, I was getting this error because my Visual Studio Solution was trying to use TextTransform.exe during a pre-build step in one of the projects, but my local machine didn't have the TextTransform.exe at the path specified by my pre-build step and my first attempt at fixing that was to just copy TextTransform.exe from some other location to where Visual Studio expected it to be. That appears to have caused this problem, because TextTransform.exe has other silent dependencies.
My fix was to change the pre-build steps so instead of looking for the file at
C:\Program Files (x86)\Common Files\microsoft shared\TextTemplating\14.0\TextTransform.exe
it would instead look in the Visual Studio install folder which had a bunch of other files, presumably one of which was a peer dependency of TextTransform.exe
C:\Program Files\Visual Studio\Common7\IDE\TextTransform.exe
That seemed to fix things for me.
I got the same problem, I am using VS2017 and installed Microsoft.EntityFrameworkCore.SqlServer 3.1.8, while in my VS2017 .Net core version is 2.1
So I downgraded my Microsoft.EntityFrameworkCore.SqlServer to 2.1.1 and restarted the solution.
The warning was gone !!
I had similar errors in VS2019 after upgrading project to .Net 5 according to https://learn.microsoft.com/en-us/aspnet/core/migration/31-to-50?view=aspnetcore-5.0&tabs=visual-studio.
error CS0006: Metadata file
'C:\Users\.nuget\packages\microsoft.codeanalysis.analyzers\1.1.0\analyzers\dotnet\cs\Microsoft.CodeAnalysis.Analyzers.dll'
could not be found.
'C:\Users\.nuget\packages\microsoft.codeanalysis.analyzers\1.1.0\analyzers\dotnet\cs\Microsoft.CodeAnalysis.CSharp.Analyzers.dll' could not be founderror CS0006: Metadata file
The fix was to close and reopen VS 2019
Try adding Nuget Package Microsoft.VisualStudio.Web.CodeGeneration.Design to your project
This question is many years old and the answers are all fairly old as well. I only recently ran into a similar-enough issue that I feel sharing my experience here (although potentially not complete) is relevant.
D:\Code\C#\sdkrazortest>dotnet --version
6.0.401
D:\Code\C#\sdkrazortest>dotnet new webapp -o webapp1
The template "ASP.NET Core Web App" was created successfully.
This template contains technologies from parties other than Microsoft, see https://aka.ms/aspnetcore/6.0-third-party-notices for details.
Processing post-creation actions...
Running 'dotnet restore' on D:\Code\C#\sdkrazortest\webapp1\webapp1.csproj...
Determining projects to restore...
Restored D:\Code\C#\sdkrazortest\webapp1\webapp1.csproj (in 102 ms).
Restore succeeded.
D:\Code\C#\sdkrazortest>cd webapp1
D:\Code\C#\sdkrazortest\webapp1>dotnet build
MSBuild version 17.3.1+2badb37d1 for .NET
Determining projects to restore...
All projects are up-to-date for restore.
REWRITECSS : error : [D:\Code\C#\sdkrazortest\webapp1\webapp1.csproj]
An assembly specified in the application dependencies manifest (rzc.deps.json) was not found:
package: 'Microsoft.CodeAnalysis.Common', version: '4.3.0-3.22415.1'
path: 'lib/netcoreapp3.1/Microsoft.CodeAnalysis.dll'
Build FAILED.
REWRITECSS : error : [D:\Code\C#\sdkrazortest\webapp1\webapp1.csproj]
0 Warning(s)
1 Error(s)
Time Elapsed 00:00:10.32
I originally tried loading packages like the top comments here had suggested and realized this issue started happening shortly after install .net core 6. After seeing some SO comments on dotnet-aspnet-codegenerator being version-specific I tried to create my netcore3.1 app using an older version of the dotnet cli via global.json:
D:\Code\C#\sdkrazortest>type global.json
{
"sdk": {
"version": "3.1.403"
}
}
D:\Code\C#\sdkrazortest>dotnet new webapp -o webapp2
Getting ready...
The template "ASP.NET Core Web App" was created successfully.
This template contains technologies from parties other than Microsoft, see https://aka.ms/aspnetcore/3.1-third-party-notices for details.
Processing post-creation actions...
Running 'dotnet restore' on webapp2\webapp2.csproj...
Determining projects to restore...
Restored D:\Code\C#\sdkrazortest\webapp2\webapp2.csproj (in 187 ms).
Restore succeeded.
D:\Code\C#\sdkrazortest>cd webapp2
D:\Code\C#\sdkrazortest\webapp2>dotnet build
Microsoft (R) Build Engine version 16.7.0+7fb82e5b2 for .NET
Copyright (C) Microsoft Corporation. All rights reserved.
Determining projects to restore...
All projects are up-to-date for restore.
webapp2 -> D:\Code\C#\sdkrazortest\webapp2\bin\Debug\netcoreapp3.1\webapp2.dll
webapp2 -> D:\Code\C#\sdkrazortest\webapp2\bin\Debug\netcoreapp3.1\webapp2.Views.dll
Build succeeded.
0 Warning(s)
0 Error(s)
Time Elapsed 00:00:09.91
While this isn't an answer for the new templates not just working for me.. it might help someone potentially get "unstuck" or be the catalyst for someone providing a proper answer.
You need to install NuGet package Microsoft.Net.Compilers.Toolset, but make sure you match the right .NET version. In my case I was targeting netcoreapp3.1 so max version could be 4.0.1.
My root cause was for MassTransit analyzers nagging they cant find Microsoft.CodeAnalysis package, eg. An instance of analyzer MassTransit.Analyzers.AsyncMethodAnalyzer cannot be created.
I think one of the possible reasons for this issue could be the incompatibility of the .NET Framework and certain NuGet package. In my case I have .NET Core 3.1 and Testcontainers 2.4.0. The error does not happen on my local machine but it keeps showing up in my GitHub Actions remotely. It goes away after I downgrade Testcontainers to 2.3.0. Later the NuGet package AspNetCore.HealthChecks.EventStore 6.0.2 causes the same issue but that gets fixed in minutes rather than in hours :)
I have been using xamarin studio, it works fine when I download a sample project from mvvmcross. It compiles and deploys the device perfectly.
But when I open the project in the visual studio, there are a lot of missing packages for some reasons. Is there a way of handling ? I am using Nuget 2.8 in Visual studio 2013
When I open Nuget as follows, there is a button to restore the missing packages. I clicked on it.
Then it is attempting to download the missing packages, and then it realizes there are dependencies as follows:
Then I am attempting to download the dependency manually as follows but it shows the packages has already downloaded but I am still seeing the missing packages in the solution, nothing is affected.
Therefore I am getting hundreds of errors as follows:
When I take a look at the property of missing packages, I see as follows
You should update your NuGet Package Manager extension in Visual Studio and then try restoring the packages again.
The restore error MvvmCross.Binding already has a dependency defined for MvvmCross.Core is caused by an old version of the NuGet package manager extension not recognising the newer target frameworks that the MvvmCross.Binding NuGet package is using in its group dependencies. This bug has been fixed in a newer version of the NuGet Package Manager.
If you search for the 'already has a dependency defined' error message you will find several cases of this, such as this StackOverflow question, for example:
Can not install NuGet package
Right click on the solution in solution explorer and choose 'restore nuget packages'