I'm on Windows 10, maintaining a C# Desktop application using Visual Studio 2019, putting controls onto a Form (System.Windows.Forms.Form). I'm attempting to change an application; reworking where the controls go etc., so there is code and control design that I want to keep and put into different locations. I am using the visual designer and connecting to code using the control events (as opposed to creating the forms dynamically).
I have Document Outline visible on the left; I cut several groups of controls I intend to paste back later, so all that one particular TableLayoutPanel has in it now is two buttons. But I cannot find those buttons in the designer. I can see them in the Document Outline; they're in a TableLayoutPanel (in a group box in another TableLayoutPanel on a TabPage, etc.). When I click on a control in the Document Outline, the corresponding control is usually highlighted in the View; however, when I click on either of these buttons, nothing is highlighted in the view.
I tried resizing the Form (which determines the sizes of all these panels/tableLayoutPanels set to 'fill'); it's currently at 1367,850; one of the button locations shows as 664,752, but I don't know in what coordinate system that applies. I tried manually setting the location to 50,50 in the properties window, but it won't let me change that there.
These buttons appear at the bottom of the form; they've never appeared there, but I've noticed sometimes the designer has shown dotted-line outlines of them outside the form entirely. They appear in place when the application is run.
I've tried changing between the 100% scaling and the 125% scaling; that didn't help. For two buttons, I suppose I could delete them and recreate them, but there are many, many controls on this UI, and if there's some trick to making things appear I'd like to know about it.
Is there a trick to this that I'm missing?
I have designed a Form class using a TableLayoutPanel. It is looking how I want it too, but I realized while running the application that it flickers when re-sizing and swapping out panels. So I created a new class, DoubleBufferedTableLayoutPanel using TableLayoutPanel as a base class. I'm wondering if there is an easy way in the Visual Studio 2012 designer to swap out the two panels without having to completely redesign the form again.
You can go into the designer.cs file and change the types manually. Since the new type derives from the old type, it should work flawlessly.
Anyone come up with a way that I can design a panel without a form?
On the surface usercontrol doesn't seem the way to go.
Background:
I come from a text editor world and VS is new to me. We did everything with panels instead of forms. So open for learning. Specifically have a base class panel (ExtendedPanel) that defines some basic controls: Cancel, Save, Save and Close. This ExtendedPanel then will be used for ClientExtendedPanel that is tied to a bindingsouce clientBindingSource. This is all tied to my entity framework model. So I will add, edit and delete sql datarows for my Client table. If no changes have happened by Save button will not be enabled. If I make a change but hit cancel it will warn me. I've done all this before but since I left that company I don't have access to the code base and they didn't use VS (text editor only)so it wasn't really transportable anyway.
All that background so I can ask: Is usercontrol the way to go, or is there something that will allow me to visually add controls to a panel like it is a form?
Yes, a UserControl provides a form-like canvas in the designer for you to add other controls (buttons, etc).
You can do this too by inheriting a panel and writing the code to add the buttons and wire their events, etc, but you won't get the designer support.
I create labels in my form in C# Visual Studio 2010, in code not with the designer. I can see the labels when the program runs but they are not visible in the designer. Can I make them visible? Or only controls created in the designer by drag and drop are visible?
Thanks
Your Controls are only visible in the designer if you create them in the InitializeComponent method. If you drag controls on the form, visual studio does that too in this method.
More Informations: C# InitializeComponent Explanation
Only controls created in the designer by drag and drop are visible.
Few years ago I created a 'plug-in' for a visual studio that created controls from the inside the editor that were there just as you would drag & drop them manually.
What worked as some kind of a prototype, and I never managed to get it to work right and bug-free, so it remained a tool that I only used, and was abandoned after several months.
So, my answer would be - you could do such a thing, but there is a lot of work involved other then just new-ing the Labels and placing it on the form from code.
Here is something that is about ASP.NET, but same principle applies...
http://forums.asp.net/t/279786.aspx/1
When i open a form in visual studio 2005 (c#) the designer automaticaly resize the form and move/resize controls without touching the designer at all. The source file is changed and when i close the designer i'm asked to save the *.cs file.
I tried to look into visual studio options without any success.
any ideas?
visual studio setup or something?
thanks,
Tal
I have been working on this problem for most of today and found some interesting things: The main source of the problem seems to be relying on anchoring. If I use docking to position my controls, instead of anchoring, my problems seem to go away. I found a couple of blog posts from 2003(!), which detail how you might use docking instead of anchoring, and explain how anchoring can break the Windows Forms designer. It seems like this problem might be over 7 years old!
Here are the posts:
http://weblogs.asp.net/rweigelt/archive/2003/09/24/28984.aspx
http://weblogs.asp.net/rweigelt/archive/2003/10/17/32407.aspx
http://weblogs.asp.net/rweigelt/archive/2003/10/23/33181.aspx
This is due to AutoScaleMode-property. Your forms have probably been designed with a different DPI or Font settings than you have now in Windows display settings. AutoScaleMode-property has 4 different possible values : Dpi, Font, Inherit or None. In Dpi or Font mode, your forms and controls will be automatically resized depending on windows display settings.
So, set the AutoScaleMode-property to None in all your forms and controls and they won't be automatically resized anymore. Try to design your forms in order to let sufficient space in every controls so that text will fit even if text size is set to 125%.
I found a work around.
not sure what happens behind but i changed my display properties. and it works fine.
here is the sequence: display propertis->settings tab->advance.
in the the advance dialog i changed the "DPI Settings" from Large (120dpi) to Normal (96 dpi)
Had the same problem with controls anchored top, left and right within complex TabControls. The visual studio forms designer was increasing the width of all nested controls each time I would open the form.
I found a simple workaround thanks to this post. I simply added a panel to each tab and set their dock property to fill. All existing controls within the tabs were moved inside those panels. This works, even if the controls are anchored top, left and right.
Works at least for Visual Studio 2013 and 2015.
This is one you should live with. Even in VS2008 such things happen from time to time. It is mostly depends on form content (controls, positions, etc), and there is no option in VS to disable such behavior.
When you open your form in designer, vs runtime rebuilds visual appearance from code behind. And sometimes it made changes at this moment. Also when you are simply adding one control to form, designer fully rebuilds codebehind and resource files. This is well known issue, and seems that MS won't fix it, because they move in WPF direction.
So several points to simplify your life:
Move to VS2008, designer were more consistent, but still shuffle controls in .designer.cs file
Place your code in one of the source repositories, so if you accidentally saved such form, you can restore it from repositary.
Setting the form Min and Max size settings to the current size was a good work around for me. This prevented VS from resizing it.
I had a trivial form with few controls on it, where the OK and Cancel at the bottom were being shifted up as soon as the form was opened in the VS2013 designer. The same behaviour was observed in VS2015.
The accepted answer here of DPI did not solve the issue for me, nor were there any issues on the size of the form/padding/margins.
Removing the controls that are shifted and adding them back into the form solved the problem for me, as suggested by ptutt here:
Visual Studio designer moving controls and adding grid columns when form is opened
While I appreciate ryantum's suggestion and links of using docking [with panels], as also referred to in the link above with Roland's blog post here https://weblogs.asp.net/rweigelt/28984, with something so trivial I'd rather just make it go away with removing/adding back in.
I found locking the controls from the format menu was a simple and effective solution. VS2013
I had this problem with VS 2015.
I used dock panels with the controls that moved unexpectedly as their childs.
By default the controls will be aligned to the left, but you can change the orientation.
My buttons stopped moving.
I had this issue, too. Every time I opened the designer, every box with anchor "right" was moved about 20 Pixels to the left. Additionally, the bottom of every box with anchor "left" was about 200 pixels outside the form.
This form has many controls and should not shrink on smaller displays, so it was set to autoscroll, the form itself was smaller in the designer than the shown minimum size (historically...). I just set the size to the minimum size so that no scroll bars appeared in the designer and the anchors worked as expected without screwing up the postitions.
I read the first post from ryantm's answer which led me to the solution. Apparently it has something to do with the order .Net executes events such as setting the size of a form.