I have a C# service called Dlocker, Dlocker has another service called DlockerUpdate, that updates Dlocker.
I'm making a function to Dlocker called checkUpdaterUpdates() that will check if a file called DlockerUpdate.exe.new exists in the DlockerUpdate folder, if exists, it will follow these steps:
Stop the service domtoolsupdate (DlockerUpdate.exe)
Remove the old DlockerUpdate.exe file
Rename DlockerUpdate.exe.new to DlockerUpdate.exe
Start the service
Here is the code for the StopService(), StartService() and checkUpdaterUpdates():
private void StartService()
{
try
{
helper.WriteToFile("{0} inside startService");
System.Diagnostics.Process process = new System.Diagnostics.Process();
System.Diagnostics.ProcessStartInfo startInfo = new System.Diagnostics.ProcessStartInfo();
startInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Hidden;
startInfo.Verb = "runas";
startInfo.FileName = "cmd.exe";
startInfo.Arguments = "/C net start domtoolsupdate";
process.StartInfo = startInfo;
process.Start();
}
catch (Exception error)
{
helper.WriteToFile("{0} error: " + error);
}
helper.WriteToFile("{0} DlockerUpdate Started");
}
private void StopService()
{
try
{
helper.WriteToFile("{0} inside stopService");
System.Diagnostics.Process process = new System.Diagnostics.Process();
System.Diagnostics.ProcessStartInfo startInfo = new System.Diagnostics.ProcessStartInfo();
startInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Hidden;
startInfo.Verb = "runas";
startInfo.FileName = "cmd.exe";
startInfo.Arguments = "/C net stop domtoolsupdate";
process.StartInfo = startInfo;
process.Start();
}
catch (Exception error)
{
helper.WriteToFile("{0} error: " + error);
}
helper.WriteToFile("{0} DlockerUpdate Stopped");
}
private void checkUpdaterUpdates()
{
var DlockerUpdatePath = AppDomain.CurrentDomain.BaseDirectory + "..\\update\\";
if (File.Exists(DlockerUpdatePath + "DlockerUpdate.exe.new")) {
helper.WriteToFile("in the if");
StopService();
File.Delete(DlockerUpdatePath + "DlockerUpdate.exe");
helper.WriteToFile("deleted dlockerupdate.exe");
File.Move(DlockerUpdatePath + "DlockerUpdate.exe.new", DlockerUpdatePath + "DlockerUpdate.exe");
helper.WriteToFile("updated dlockerupdate.exe");
StartService();
helper.WriteToFile("started the service");
}
}
In the StopService(), instead of stopping only domtoolsupdate (DlockerUpdate.exe), it's stopping domtools (Dlocker.exe) and domtoolsupdate, and I can't find out why.
I've copied and adapted the start and stop service functions from DlockerUpdate.exe to work on Dlocker.exe, but it doesn't works for some reason.
As you have seen, in the code there is a function called helper, the helper is my debugger, when I call him, it writes on a file called Dlocker.log, when the stop service is running, this is the result of the helper:
The log does not return any signals of Dlocker.exe has stopped, but in the log of DlockerUpdate.exe, it returns that the service has been stopped:
There's no function in DlockerUpdate.exe that kills Dlocker.exe when it's stopped.
What should I try?
I am doing an unattended installer, I ran it with cmd as below, and it is working without any problem.
setup.exe -q -J -Djava.security.manager=allow
Now I am trying to use the same arguments in my c# console application code, but it will ignore the arguments. Can you please check the method below and support if there is a way to do it?
static int RunSetup(out string stdout)
{
try
{
System.Diagnostics.Process process = new System.Diagnostics.Process();
ProcessStartInfo startInfo = new ProcessStartInfo();
//startInfo.WindowStyle = System.Diagnostics.ProcessWindowStyle.Normal;
startInfo.CreateNoWindow = false;
startInfo.UseShellExecute = false;
startInfo.RedirectStandardOutput = true;
startInfo.RedirectStandardError = true;
startInfo.Arguments = "-q -J -Djava.security.manager=allow";
startInfo.FileName = "setup.exe";
startInfo.WorkingDirectory = Environment.CurrentDirectory;
process.StartInfo = startInfo;
process.Start();
stdout = process.StandardOutput.ReadToEnd();
process.WaitForExit();
int exitCode = process.ExitCode;
process.Close();
return exitCode;
}
catch (Exception exception)
{
throw new Exception("exeption = " + exception.Message);
}
}
I wrote a small .net console application that just prints the arguments that are passed to the application:
Console.WriteLine(string.Join(":", args ));
and named it setup.exe.
When i used your code example to call it it prints out -q:-J:-Djava.security.manager=allow as expected, so your code seem to work just as you expected. This was tested using .NET 7, though.
i am trying to call and collect the data returned by the CMD command query user.
Calling this via cmd from the Windows-startbar gives me a normal result.
Calling this via this c# function give 0 output.
public void callQueryUser()
{
ProcessStartInfo psi = new ProcessStartInfo("cmd.exe");
Process p = Process.Start(psi);
string cmd = string.Format(#"/c query user");
psi.Arguments = cmd;
psi.RedirectStandardOutput = true;
psi.UseShellExecute = false;
psi.CreateNoWindow = true;
psi.WaitForExit();
string result = p.StandardOutput.ReadToEnd();
MessageBox.Show(result);
}
I checked and the Window says command cant befound... I also check if they are both the same cmd.exe and thats also true. It seems like calling the cmd.exe via C# makes somewhat of a differences.
Anyone any idea what i could check next ?
It's not necessary to use cmd to retrieve the information you want using Process. However, if your OS is 64-bit, your program is running as 32-bit, and you're trying to access %windir%\System32\query.exe, you need to use %windir%\Sysnative\query.exe instead.
Try the following:
Option 1:
public void callQueryUser()
{
string queryPath = string.Empty;
//use 'Sysnative' to access 64-bit files (in System32) if program is running as 32-bit process
//use 'SysWow64' to access 32-bit files on 64-bit OS
if (Environment.Is64BitOperatingSystem && !Environment.Is64BitProcess)
queryPath = System.IO.Path.Combine(Environment.GetEnvironmentVariable("windir"), "Sysnative", "query.exe");
else
queryPath = System.IO.Path.Combine(Environment.GetEnvironmentVariable("windir"), "System32", "query.exe");
Debug.WriteLine("queryPath: " + queryPath);
// create new instance
ProcessStartInfo startInfo = new ProcessStartInfo(queryPath);
startInfo.Arguments = "user"; //arguments
startInfo.CreateNoWindow = true; //don't create a window
startInfo.RedirectStandardError = true; //redirect standard error
startInfo.RedirectStandardOutput = true; //redirect standard output
startInfo.UseShellExecute = false; //if true, uses 'ShellExecute'; if false, uses 'CreateProcess'
startInfo.WindowStyle = ProcessWindowStyle.Hidden;
//create new instance
using (Process p = new Process { StartInfo = startInfo, EnableRaisingEvents = true })
{
//subscribe to event and add event handler code
p.ErrorDataReceived += (sender, e) =>
{
if (!String.IsNullOrEmpty(e.Data))
{
//ToDo: add desired code
Debug.WriteLine("Error: " + e.Data);
}
};
//subscribe to event and add event handler code
p.OutputDataReceived += (sender, e) =>
{
if (!String.IsNullOrEmpty(e.Data))
{
//ToDo: add desired code
Debug.WriteLine("Output: " + e.Data);
string result = e.Data;
MessageBox.Show(result);
}
};
p.Start(); //start
p.BeginErrorReadLine(); //begin async reading for standard error
p.BeginOutputReadLine(); //begin async reading for standard output
//waits until the process is finished before continuing
p.WaitForExit();
}
}
Option 2:
public void callQueryUser()
{
string queryPath = string.Empty;
//environment variable windir has the same value as SystemRoot
//use 'Sysnative' to access 64-bit files (in System32) if program is running as 32-bit process
//use 'SysWow64' to access 32-bit files on 64-bit OS
if (Environment.Is64BitOperatingSystem && !Environment.Is64BitProcess)
queryPath = System.IO.Path.Combine(Environment.GetEnvironmentVariable("windir"), "Sysnative", "query.exe");
else
queryPath = System.IO.Path.Combine(Environment.GetEnvironmentVariable("windir"), "System32", "query.exe");
Debug.WriteLine("queryPath: " + queryPath);
// create new instance
ProcessStartInfo startInfo = new ProcessStartInfo(queryPath);
startInfo.Arguments = "user"; //arguments
startInfo.CreateNoWindow = true; //don't create a window
startInfo.RedirectStandardError = true; //redirect standard error
startInfo.RedirectStandardOutput = true; //redirect standard output
startInfo.UseShellExecute = false; //if true, uses 'ShellExecute'; if false, uses 'CreateProcess'
startInfo.WindowStyle = ProcessWindowStyle.Hidden;
//create new instance
using (Process p = new Process { StartInfo = startInfo, EnableRaisingEvents = true })
{
p.Start(); //start
//waits until the process is finished before continuing
p.WaitForExit();
string result = p.StandardOutput.ReadToEnd();
MessageBox.Show(result);
}
}
Resources:
Accessing files from System32 directory using 32 bit application on 64 bit machine
Process Class
ProcessStartInfo Class
Environment.GetEnvironmentVariable Method
I am getting wired problem with a process that is started by my c# application,in my application i start a process that runs a ffmpeg command which executes well but when in any how if i closes my application then that process still continues to executes.
private static bool RunRecordProcess(string command)
{
Process process = new Process();
try
{
ProcessStartInfo processStartInfo = new
ProcessStartInfo(Application.StartupPath +
FFMPEG_EXE_FILE_PATH);
processStartInfo.UseShellExecute = false;
processStartInfo.Arguments = "-hide_banner -loglevel 8 " +
command;
processStartInfo.RedirectStandardError = true;
processStartInfo.RedirectStandardOutput = true;
processStartInfo.RedirectStandardInput = true;
processStartInfo.WindowStyle = ProcessWindowStyle.Hidden;
processStartInfo.CreateNoWindow = true;
processStartInfo.Verb = "";
process.EnableRaisingEvents = true;
process.StartInfo = processStartInfo;
process.Start();
string error = process.StandardError.ReadToEnd();
if (error.Length > 0)
{
if (!process.HasExited)
{
process.Kill();
//throw new Exception("Failure some error occured");
}
}
process.WaitForExit();
}
catch(Exception ex)
{
process.Kill();
ExceptionHandler.handleException(ex);
return false;
}
return true;
}
What i want is when my application exits my process that is started by the application will automatically exit so that no useless process will be using my system Cpu.
Thankyou!
You should create job object (CreateJobObject function in kernel32). There is more description:
https://tulisanlain.blogspot.com/2016/08/kill-child-process-when-parent-exit-c.html
How do I execute a command-line program from C# and get back the STD OUT results? Specifically, I want to execute DIFF on two files that are programmatically selected and write the results to a text box.
// Start the child process.
Process p = new Process();
// Redirect the output stream of the child process.
p.StartInfo.UseShellExecute = false;
p.StartInfo.RedirectStandardOutput = true;
p.StartInfo.FileName = "YOURBATCHFILE.bat";
p.Start();
// Do not wait for the child process to exit before
// reading to the end of its redirected stream.
// p.WaitForExit();
// Read the output stream first and then wait.
string output = p.StandardOutput.ReadToEnd();
p.WaitForExit();
Code is from MSDN.
Here's a quick sample:
//Create process
System.Diagnostics.Process pProcess = new System.Diagnostics.Process();
//strCommand is path and file name of command to run
pProcess.StartInfo.FileName = strCommand;
//strCommandParameters are parameters to pass to program
pProcess.StartInfo.Arguments = strCommandParameters;
pProcess.StartInfo.UseShellExecute = false;
//Set output of program to be written to process output stream
pProcess.StartInfo.RedirectStandardOutput = true;
//Optional
pProcess.StartInfo.WorkingDirectory = strWorkingDirectory;
//Start the process
pProcess.Start();
//Get program output
string strOutput = pProcess.StandardOutput.ReadToEnd();
//Wait for process to finish
pProcess.WaitForExit();
There one other parameter I found useful, which I use to eliminate the process window
pProcess.StartInfo.CreateNoWindow = true;
this helps to hide the black console window from user completely, if that is what you desire.
// usage
const string ToolFileName = "example.exe";
string output = RunExternalExe(ToolFileName);
public string RunExternalExe(string filename, string arguments = null)
{
var process = new Process();
process.StartInfo.FileName = filename;
if (!string.IsNullOrEmpty(arguments))
{
process.StartInfo.Arguments = arguments;
}
process.StartInfo.CreateNoWindow = true;
process.StartInfo.WindowStyle = ProcessWindowStyle.Hidden;
process.StartInfo.UseShellExecute = false;
process.StartInfo.RedirectStandardError = true;
process.StartInfo.RedirectStandardOutput = true;
var stdOutput = new StringBuilder();
process.OutputDataReceived += (sender, args) => stdOutput.AppendLine(args.Data); // Use AppendLine rather than Append since args.Data is one line of output, not including the newline character.
string stdError = null;
try
{
process.Start();
process.BeginOutputReadLine();
stdError = process.StandardError.ReadToEnd();
process.WaitForExit();
}
catch (Exception e)
{
throw new Exception("OS error while executing " + Format(filename, arguments)+ ": " + e.Message, e);
}
if (process.ExitCode == 0)
{
return stdOutput.ToString();
}
else
{
var message = new StringBuilder();
if (!string.IsNullOrEmpty(stdError))
{
message.AppendLine(stdError);
}
if (stdOutput.Length != 0)
{
message.AppendLine("Std output:");
message.AppendLine(stdOutput.ToString());
}
throw new Exception(Format(filename, arguments) + " finished with exit code = " + process.ExitCode + ": " + message);
}
}
private string Format(string filename, string arguments)
{
return "'" + filename +
((string.IsNullOrEmpty(arguments)) ? string.Empty : " " + arguments) +
"'";
}
The accepted answer on this page has a weakness that is troublesome in rare situations. There are two file handles which programs write to by convention, stdout, and stderr.
If you just read a single file handle such as the answer from Ray, and the program you are starting writes enough output to stderr, it will fill up the output stderr buffer and block. Then your two processes are deadlocked. The buffer size may be 4K.
This is extremely rare on short-lived programs, but if you have a long running program which repeatedly outputs to stderr, it will happen eventually. This is tricky to debug and track down.
There are a couple good ways to deal with this.
One way is to execute cmd.exe instead of your program and use the /c argument to cmd.exe to invoke your program along with the "2>&1" argument to cmd.exe to tell it to merge stdout and stderr.
var p = new Process();
p.StartInfo.FileName = "cmd.exe";
p.StartInfo.Arguments = "/c mycmd.exe 2>&1";
Another way is to use a programming model which reads both handles at the same time.
var p = new Process();
p.StartInfo.FileName = "cmd.exe";
p.StartInfo.Arguments = #"/c dir \windows";
p.StartInfo.CreateNoWindow = true;
p.StartInfo.RedirectStandardError = true;
p.StartInfo.RedirectStandardOutput = true;
p.StartInfo.RedirectStandardInput = false;
p.OutputDataReceived += (a, b) => Console.WriteLine(b.Data);
p.ErrorDataReceived += (a, b) => Console.WriteLine(b.Data);
p.Start();
p.BeginErrorReadLine();
p.BeginOutputReadLine();
p.WaitForExit();
System.Diagnostics.ProcessStartInfo psi =
new System.Diagnostics.ProcessStartInfo(#"program_to_call.exe");
psi.RedirectStandardOutput = true;
psi.WindowStyle = System.Diagnostics.ProcessWindowStyle.Hidden;
psi.UseShellExecute = false;
System.Diagnostics.Process proc = System.Diagnostics.Process.Start(psi); ////
System.IO.StreamReader myOutput = proc.StandardOutput;
proc.WaitForExit(2000);
if (proc.HasExited)
{
string output = myOutput.ReadToEnd();
}
You will need to use ProcessStartInfo with RedirectStandardOutput enabled - then you can read the output stream. You might find it easier to use ">" to redirect the output to a file (via the OS), and then simply read the file.
[edit: like what Ray did: +1]
One-liner run command:
new Process() { StartInfo = new ProcessStartInfo("echo", "Hello, World") }.Start();
Read output of command in shortest amount of reable code:
var cliProcess = new Process() {
StartInfo = new ProcessStartInfo("echo", "Hello, World") {
UseShellExecute = false,
RedirectStandardOutput = true
}
};
cliProcess.Start();
string cliOut = cliProcess.StandardOutput.ReadToEnd();
cliProcess.WaitForExit();
cliProcess.Close();
In case you also need to execute some command in the cmd.exe, you can do the following:
// Start the child process.
Process p = new Process();
// Redirect the output stream of the child process.
p.StartInfo.UseShellExecute = false;
p.StartInfo.RedirectStandardOutput = true;
p.StartInfo.FileName = "cmd.exe";
p.StartInfo.Arguments = "/C vol";
p.Start();
// Read the output stream first and then wait.
string output = p.StandardOutput.ReadToEnd();
p.WaitForExit();
Console.WriteLine(output);
This returns just the output of the command itself:
You can also use StandardInput instead of StartInfo.Arguments:
// Start the child process.
Process p = new Process();
// Redirect the output stream of the child process.
p.StartInfo.UseShellExecute = false;
p.StartInfo.RedirectStandardInput = true;
p.StartInfo.RedirectStandardOutput = true;
p.StartInfo.FileName = "cmd.exe";
p.Start();
// Read the output stream first and then wait.
p.StandardInput.WriteLine("vol");
p.StandardInput.WriteLine("exit");
string output = p.StandardOutput.ReadToEnd();
p.WaitForExit();
Console.WriteLine(output);
The result looks like this:
Since the most answers here dont implement the using statemant for IDisposable and some other stuff wich I think could be nessecary I will add this answer.
For C# 8.0
// Start a process with the filename or path with filename e.g. "cmd". Please note the
//using statemant
using myProcess.StartInfo.FileName = "cmd";
// add the arguments - Note add "/c" if you want to carry out tge argument in cmd and
// terminate
myProcess.StartInfo.Arguments = "/c dir";
// Allows to raise events
myProcess.EnableRaisingEvents = true;
//hosted by the application itself to not open a black cmd window
myProcess.StartInfo.UseShellExecute = false;
myProcess.StartInfo.CreateNoWindow = true;
// Eventhander for data
myProcess.Exited += OnOutputDataRecived;
// Eventhandler for error
myProcess.ErrorDataReceived += OnErrorDataReceived;
// Eventhandler wich fires when exited
myProcess.Exited += OnExited;
// Starts the process
myProcess.Start();
//read the output before you wait for exit
myProcess.BeginOutputReadLine();
// wait for the finish - this will block (leave this out if you dont want to wait for
// it, so it runs without blocking)
process.WaitForExit();
// Handle the dataevent
private void OnOutputDataRecived(object sender, DataReceivedEventArgs e)
{
//do something with your data
Trace.WriteLine(e.Data);
}
//Handle the error
private void OnErrorDataReceived(object sender, DataReceivedEventArgs e)
{
Trace.WriteLine(e.Data);
//do something with your exception
throw new Exception();
}
// Handle Exited event and display process information.
private void OnExited(object sender, System.EventArgs e)
{
Trace.WriteLine("Process exited");
}
Here is small example:
using System;
using System.Diagnostics;
class Program
{
static void Main(string[] args)
{
var p = Process.Start(
new ProcessStartInfo("git", "branch --show-current")
{
CreateNoWindow = true,
UseShellExecute = false,
RedirectStandardError = true,
RedirectStandardOutput = true,
WorkingDirectory = Environment.CurrentDirectory
}
);
p.WaitForExit();
string branchName =p.StandardOutput.ReadToEnd().TrimEnd();
string errorInfoIfAny =p.StandardError.ReadToEnd().TrimEnd();
if (errorInfoIfAny.Length != 0)
{
Console.WriteLine($"error: {errorInfoIfAny}");
}
else {
Console.WriteLine($"branch: {branchName}");
}
}
}
I believe this is shortest form.
Please notice that most of command line tools easily confuse standard output and standard error, sometimes it makes sense just to clue those together into single string.
Also p.ExitCode might be sometimes useful.
Example above serves for purpose of writing command line utility like tools if you want to do it by yourself. Please note that for cli automation it's also possible to use Cake Frosten and Cake Git extension.
You can launch any command line program using the Process class, and set the StandardOutput property of the Process instance with a stream reader you create (either based on a string or a memory location). After the process completes, you can then do whatever diff you need to on that stream.
This might be useful for someone if your attempting to query the local ARP cache on a PC/Server.
List<string[]> results = new List<string[]>();
using (Process p = new Process())
{
p.StartInfo.CreateNoWindow = true;
p.StartInfo.RedirectStandardOutput = true;
p.StartInfo.UseShellExecute = false;
p.StartInfo.Arguments = "/c arp -a";
p.StartInfo.FileName = #"C:\Windows\System32\cmd.exe";
p.Start();
string line;
while ((line = p.StandardOutput.ReadLine()) != null)
{
if (line != "" && !line.Contains("Interface") && !line.Contains("Physical Address"))
{
var lineArr = line.Trim().Split(' ').Select(n => n).Where(n => !string.IsNullOrEmpty(n)).ToArray();
var arrResult = new string[]
{
lineArr[0],
lineArr[1],
lineArr[2]
};
results.Add(arrResult);
}
}
p.WaitForExit();
}
This may not be the best/easiest way, but may be an option:
When you execute from your code, add " > output.txt" and then read in the output.txt file.
There is a ProcessHelper Class in PublicDomain open source code which might interest you.
Julian's solution is tested working with some minor corrections. The following is an example that also used https://sourceforge.net/projects/bat-to-exe/ GenericConsole.cs and https://www.codeproject.com/Articles/19225/Bat-file-compiler program.txt for args part:
using System;
using System.Text; //StringBuilder
using System.Diagnostics;
using System.IO;
class Program
{
private static bool redirectStandardOutput = true;
private static string buildargument(string[] args)
{
StringBuilder arg = new StringBuilder();
for (int i = 0; i < args.Length; i++)
{
arg.Append("\"" + args[i] + "\" ");
}
return arg.ToString();
}
static void Main(string[] args)
{
Process prc = new Process();
prc.StartInfo = //new ProcessStartInfo("cmd.exe", String.Format("/c \"\"{0}\" {1}", Path.Combine(Environment.CurrentDirectory, "mapTargetIDToTargetNameA3.bat"), buildargument(args)));
//new ProcessStartInfo(Path.Combine(Environment.CurrentDirectory, "mapTargetIDToTargetNameA3.bat"), buildargument(args));
new ProcessStartInfo("mapTargetIDToTargetNameA3.bat");
prc.StartInfo.Arguments = buildargument(args);
prc.EnableRaisingEvents = true;
if (redirectStandardOutput == true)
{
prc.StartInfo.UseShellExecute = false;
}
else
{
prc.StartInfo.UseShellExecute = true;
}
prc.StartInfo.CreateNoWindow = true;
prc.OutputDataReceived += OnOutputDataRecived;
prc.ErrorDataReceived += OnErrorDataReceived;
//prc.Exited += OnExited;
prc.StartInfo.RedirectStandardOutput = redirectStandardOutput;
prc.StartInfo.RedirectStandardError = redirectStandardOutput;
try
{
prc.Start();
prc.BeginOutputReadLine();
prc.BeginErrorReadLine();
prc.WaitForExit();
}
catch (Exception e)
{
Console.WriteLine("OS error: " + e.Message);
}
prc.Close();
}
// Handle the dataevent
private static void OnOutputDataRecived(object sender, DataReceivedEventArgs e)
{
//do something with your data
Console.WriteLine(e.Data);
}
//Handle the error
private static void OnErrorDataReceived(object sender, DataReceivedEventArgs e)
{
Console.WriteLine(e.Data);
}
// Handle Exited event and display process information.
//private static void OnExited(object sender, System.EventArgs e)
//{
// var process = sender as Process;
// if (process != null)
// {
// Console.WriteLine("ExitCode: " + process.ExitCode);
// }
// else
// {
// Console.WriteLine("Process exited");
// }
//}
}
The code need to compile inside VS2007, using commandline csc.exe generated executable will not show console output correctly, or even crash with CLR20r3 error. Comment out the OnExited event process, the console output of the bat to exe will be more like the original bat console output.
Just for fun, here's my completed solution for getting PYTHON output - under a button click - with error reporting. Just add a button called "butPython" and a label called "llHello"...
private void butPython(object sender, EventArgs e)
{
llHello.Text = "Calling Python...";
this.Refresh();
Tuple<String,String> python = GoPython(#"C:\Users\BLAH\Desktop\Code\Python\BLAH.py");
llHello.Text = python.Item1; // Show result.
if (python.Item2.Length > 0) MessageBox.Show("Sorry, there was an error:" + Environment.NewLine + python.Item2);
}
public Tuple<String,String> GoPython(string pythonFile, string moreArgs = "")
{
ProcessStartInfo PSI = new ProcessStartInfo();
PSI.FileName = "py.exe";
PSI.Arguments = string.Format("\"{0}\" {1}", pythonFile, moreArgs);
PSI.CreateNoWindow = true;
PSI.UseShellExecute = false;
PSI.RedirectStandardError = true;
PSI.RedirectStandardOutput = true;
using (Process process = Process.Start(PSI))
using (StreamReader reader = process.StandardOutput)
{
string stderr = process.StandardError.ReadToEnd(); // Error(s)!!
string result = reader.ReadToEnd(); // What we want.
return new Tuple<String,String> (result,stderr);
}
}