We Keep Coding

How to convert a byteArray to Binary Value in c#?

I initilaly have a string which is converted to byteArray.
Then I convert this byteArray to HEX as shown below in my code.
Then I further need to convert this to a binary value.
string ID = "A0101185K";
byte[] ba = Encoding.Default.GetBytes(IC);
var hexString= BitConverter.ToString(ba).Replace("-", "");

You can convert byte to string in that way
static string ToBinary(byte b) => Convert.ToString(b, 2).PadLeft(8, '0');
and use it in your program like this
string MESSAGE = "A0101185K";
byte[] bytes = Encoding.Default.GetBytes(MESSAGE);
var binaries = string.Concat(bytes.Select(ToBinary));
I hope that helps you. But of course you didn't tell how you want to store your result, so maybe this is not the right answer.

How to convert unicode to utf-8 encoding in c#

I want to convert unicode string to UTF8 string. I want to use this UTF8 string in SMS API to send unicode SMS.
I want conversion like this tool
https://cafewebmaster.com/online_tools/utf8_encode
eg. I have unicode string "हैलो फ़्रेंड्स" and it should be converted into "हà¥à¤²à¥ à¥à¥à¤°à¥à¤à¤¡à¥à¤¸"
I have tried this but not getting expected output
private string UnicodeToUTF8(string strFrom)
{
byte[] bytes = Encoding.Default.GetBytes(strFrom);
return Encoding.UTF8.GetString(bytes);
}
and calling function like this
string myUTF8String = UnicodeToUTF8("हैलो फ़्रेंड्स");

I don't think this is possible to answer concretely without knowing more about the SMS API you want to use. The string type in C# is UTF-16. If you want a different encoding, it's given to you as a byte[] (because a string is UTF-16, always).
You could 'cast' that into a string by doing something like this:
static string UnicodeToUTF8(string from) {
var bytes = Encoding.UTF8.GetBytes(from);
return new string(bytes.Select(b => (char)b).ToArray());
}
As far as I can tell this yields the same output as the website you linked. However, without knowing what API you're handing this string off to, I can't guarantee that this will ultimately work.
The point of string is that we don't need to worry about its underlying encoding, but this casting operation is kind of a giant hack and makes no guarantees that string represents a well-formed string anymore.
If something expects a UTF-8 encoding, it should accept a byte[], not a string.

Try this:
string output = "hello world";
byte[] bytes1 = Encoding.Convert(Encoding.Unicode, Encoding.UTF8, Encoding.Unicode.GetBytes(output));
byte[] bytes2 = Encoding.Convert(Encoding.Unicode, Encoding.Unicode, Encoding.Unicode.GetBytes(output));
var output1 = Encoding.UTF8.GetString(bytes1);
var output2 = Encoding.Unicode.GetString(bytes2);
You will see that bytes1 is 11 bytes (1 byte per char UTF-8) and bytes2 is 22 bytes (2 bytes per char for unicode)

UtF-8 gives extra string in German character

I have file name testtäöüßÄÖÜ . I want to convert in UTF-8 using c#.
string test ="testtäöüß";
var bytes = new List<byte>(test.Length);
foreach (var c in test)
bytes.Add((byte)c);
var retValue = Encoding.UTF8.GetString(bytes.ToArray());
after running this code my output is : 'testt mit Umlaute äöü?x. where mit Umlaute is extra
text.
Can anybody help me ?
Thanks in advance.

You can't do that. You can't cast an UTF-8 character to byte. UTF-8 for anything other than ASCII requires at least two bytes, byte can can't store this
Instead of creating a list, use
byte[] bytes = System.Text.Encoding.UTF8.GetBytes (test);

I think, Tseng means the following
Taken from: http://www.chilkatsoft.com/p/p_320.asp
System.Text.Encoding utf_8 = System.Text.Encoding.UTF8;
// This is our Unicode string:
string s_unicode = "abcéabc";
// Convert a string to utf-8 bytes.
byte[] utf8Bytes = System.Text.Encoding.UTF8.GetBytes(s_unicode);
// Convert utf-8 bytes to a string.
string s_unicode2 = System.Text.Encoding.UTF8.GetString(utf8Bytes);
MessageBox.Show(s_unicode2);

Error in converting from Encrypted value

I have a encryption method GetDecryptedSSN(). I tested it’s correctness by the following test. It works fine
//////////TEST 2//////////
byte[] encryptedByteWithIBMEncoding2 = DecryptionServiceHelper.GetEncryptedSSN("123456789");
string clearTextSSN2 = DecryptionServiceHelper.GetDecryptedSSN(encryptedByteWithIBMEncoding2);
But when I do a conversion to ASCII String and then back, it is not working correctly. What is the problem in the conversion logic?
//////////TEST 1//////////
//String -- > ASCII Byte --> IBM Byte -- > encryptedByteWithIBMEncoding
byte[] encryptedByteWithIBMEncoding = DecryptionServiceHelper.GetEncryptedSSN("123456789");
//encryptedByteWithIBMEncoding --> Encrypted Byte ASCII
string EncodingFormat = "IBM037";
byte[] encryptedByteWithASCIIEncoding = Encoding.Convert(Encoding.GetEncoding(EncodingFormat), Encoding.ASCII,
encryptedByteWithIBMEncoding);
//Encrypted Byte ASCII - ASCII Encoded string
string encodedEncryptedStringInASCII = System.Text.ASCIIEncoding.ASCII.GetString(encryptedByteWithASCIIEncoding);
//UpdateSSN(encodedEncryptedStringInASCII);
byte[] dataInBytesASCII = System.Text.ASCIIEncoding.ASCII.GetBytes(encodedEncryptedStringInASCII);
byte[] bytesInIBM = Encoding.Convert(Encoding.ASCII, Encoding.GetEncoding(EncodingFormat),
dataInBytesASCII);
string clearTextSSN = DecryptionServiceHelper.GetDecryptedSSN(bytesInIBM);
Helper Class
public static class DecryptionServiceHelper
{
public const string EncodingFormat = "IBM037";
public const string SSNPrefix = "0000000";
public const string Encryption = "E";
public const string Decryption = "D";
public static byte[] GetEncryptedSSN(string clearTextSSN)
{
return GetEncryptedID(SSNPrefix + clearTextSSN);
}
public static string GetDecryptedSSN(byte[] encryptedSSN)
{
return GetDecryptedID(encryptedSSN);
}
private static byte[] GetEncryptedID(string id)
{
ServiceProgram input = new ServiceProgram();
input.RequestText = Encodeto64(id);
input.RequestType = Encryption;
ProgramInterface inputRequest = new ProgramInterface();
inputRequest.Test__Request = input;
using (MY_Service operation = new MY_Service())
{
return ((operation.MY_Operation(inputRequest)).Test__Response.ResponseText);
}
}
private static string GetDecryptedID(byte[] id)
{
ServiceProgram input = new ServiceProgram();
input.RequestText = id;
input.RequestType = Decryption;
ProgramInterface request = new ProgramInterface();
request.Test__Request = input;
using (MY_Service operationD = new MY_Service())
{
ProgramInterface1 response = operationD.MY_Operation(request);
byte[] encodedBytes = Encoding.Convert(Encoding.GetEncoding(EncodingFormat), Encoding.ASCII,
response.Test__Response.ResponseText);
return System.Text.ASCIIEncoding.ASCII.GetString(encodedBytes);
}
}
private static byte[] Encodeto64(string toEncode)
{
byte[] dataInBytes = System.Text.ASCIIEncoding.ASCII.GetBytes(toEncode);
Encoding encoding = Encoding.GetEncoding(EncodingFormat);
return Encoding.Convert(Encoding.ASCII, encoding, dataInBytes);
}
}
REFERENCE:
Getting incorrect decryption value using AesCryptoServiceProvider

This is the problem, I suspect:
string encodedEncryptedStringInASCII =
System.Text.ASCIIEncoding.ASCII.GetString(encryptedByteWithASCIIEncoding);
(It's not entirely clear because of all the messing around with encodings beforehand, which seems pointless to me, but...)
The result of encryption is not "text encoded in ASCII" - so you shouldn't try to treat it that way. (You haven't said what kind of encryption you're using, but it would be very odd for it to produce ASCII text.)
It's just an arbitrary byte array. In order to represent that in text only using the ASCII character set, the most common approach is to use base64. So the above code would become:
string encryptedText = Convert.ToBase64(encryptedByteWithIBMEncoding);
Then later, you'd convert it back to a byte array ready for decryption as:
encryptedByteWithIBMEncoding = Convert.FromBase64String(encryptedText);
I would strongly advise you to avoid messing around with the encodings like this if you can help it though. It's not clear why ASCII needs to get involved at all. If you really want to encode your original text as IBM037 before encryption, you should just use:
Encoding encoding = Encoding.GetEncoding("IBM037");
string unencryptedBinary = encoding.GetBytes(textInput);
Personally I'd usually use UTF-8, as an encoding which can handle any character data rather than just a limited subset, but that's up to you. I think you're making the whole thing much more complicated than it needs to be though.
A typical "encrypt a string, getting a string result" workflow is:
Convert input text to bytes using UTF-8. The result is a byte array.
Encrypt result of step 1. The result is a byte array.
Convert result of step 2 into base64. The result is a string.
To decrypt:
Convert the string from base64. The result is a byte array.
Decrypt the result of step 1. The result is a byte array.
Convert the result of step 2 back to a string using the same encoding as step 1 of the encryption process.

In DecryptionServiceHelper.GetEncryptedSSN you are encoding the text in IBM037 format BEFORE encrypting.
So the following piece of code is not correct as you are converting the encrypted bytes to ASCII assuming that its in the IBM037 format. That's wrong as the encrypted bytes is not in IBM037 format (the text was encoded before encryption)
//encryptedByteWithIBMEncoding --> Encrypted Byte ASCII
string EncodingFormat = "IBM037";
byte[] encryptedByteWithASCIIEncoding = Encoding.Convert(Encoding.GetEncoding(EncodingFormat), Encoding.ASCII,
encryptedByteWithIBMEncoding);
One possible solution is to encode the encrypted text using IBM037 format, that should fix the issue I guess.

How to convert ’ to apostrophe in C#?

I have tried several combinations of ASCII, Latin1, Windows-1252, UTF-8 and Unicode to convert ’ to apostrophe in C#, but to no avail.
byte[] uBytes = Encoding.Unicode.GetBytes(questionString);
byte[] utf8Bytes = Encoding.Convert(Encoding.Unicode, Encoding.UTF8, uBytes);
string converted = Encoding.UTF8.GetString(utf8Bytes);
I am using this conversion chart to discover what each code should be: http://www.i18nqa.com/debug/utf8-debug.html

Try the following:
var bytes = Encoding.Default.GetBytes("’");
var text = Encoding.UTF8.GetString(bytes);
Console.WriteLine(text);