Given code is working properly but while checking page url on redirect checker,it gives error as too many redirections which may affect on performace of app.
if (Request.QueryString[null] != null)
{
string LastIndexOFUrl = Request.RawUrl.Substring(Request.RawUrl.LastIndexOf('/') + 1);
if (lang == "eng")
{
//Session["ServiceName"] = Request.QueryString[null].ToString();
//
dt2 = FEManager.GetOurServiceByID(CommonFunction.GetLangType(), LastIndexOFUrl);
if (dt2.Rows.Count > 0)
{
string Name_En = dt2.Rows[0]["URLEng"].ToString();
Name_En = Regex.Replace(Name_En, "[^0-9A-Za-z -]", "").ToLower().Replace(' ', '-');
if (Convert.ToString(Session["ServiceName"]) != Name_En)
{
Session["ServiceName"] = Name_En;
Response.Redirect(CommonFunction.GetLangWiseRedirectLink(1428, 1429) + "/" + Name_En);
}
else
Session["ServiceName"] = Name_En;
}
//
}
else
{
Session["ServiceName"] = Request.RawUrl.Substring(Request.RawUrl.LastIndexOf('/') + 1);
//temp code:
dt1 = FEManager.GetOurServiceByID(CommonFunction.GetLangType(), Session["ServiceName"].ToString());
if (dt1.Rows.Count > 0)
{
if (Session["ServiceName"].ToString() != dt1.Rows[0]["URLAr"].ToString())
{
Response.Redirect(CommonFunction.GetLangWiseRedirectLink(1428, 1429) + "/" + dt1.Rows[0]["URLAr"].ToString());
}
Session["ServiceName"] = dt1.Rows[0]["URLAr"].ToString();
}
}
string sessionData1 = Session["ServiceName"].ToString();
}
else
{
if (Session["ServiceName"] == null)
{
Response.Redirect(CommonFunction.GetLangWiseRedirectLink(1342, 1343));
}
else
{
Response.Redirect(CommonFunction.GetLangWiseRedirectLink(1428, 1429) + "/" + Session["ServiceName"].ToString());
}
}
dt = FEManager.GetOurServiceByID(CommonFunction.GetLangType(), Session["ServiceName"].ToString());
if (dt.Rows.Count > 0)
{
ltContent.Text = dt.Rows[0]["longDesc"].ToString();
ltHeader.Text = dt.Rows[0]["name"].ToString();
hdnID.Value = dt.Rows[0]["ID"].ToString();
((DotNetNuke.Framework.CDefault)this.Page).Title = dt.Rows[0]["pageTitle"].ToString();
}
If you get "too many redirects" it's almost always because you have created an infinite loop of redirects by redirecting to the same page.
Step through the code in a debugger and carefully check the redirect urls.
I'm trying to search my inbox and all subfolders for a given string in the subject line. I found the following code online(https://www.add-in-express.com/creating-addins-blog/2012/05/31/outlook-search-csharp-vbnet/), but it returns zero results which is not the expected result.
I looked at the filter under view settings in outlook for a given search term that returns results in the outlook explorer and got this query: "http://schemas.microsoft.com/mapi/proptag/0x0037001f" LIKE '%Ticket%'
When I plug that in to the below code I likewise get zero results.
When I use LINQ to query those folders(LINQ is too slow to be a real solution here) I can get results so I'm guessing I'm making a syntactical error with advancedsearch. It is hard to find examples of usage on the web. I will appreciate anyone that can help me.
private Search RunAdvancedSearch(Outlook._Application OutlookApp, string wordInSubject)
{
string advancedSearchTag = "New Search";
string scope = "Inbox";
string filter = "\"urn:schemas:mailheader:subject\" LIKE '%"+ wordInSubject +"%'";
Outlook.Search advancedSearch = null;
Outlook.MAPIFolder folderInbox = null;
Outlook.MAPIFolder folderSentMail = null;
Outlook.NameSpace ns = null;
try
{
ns = OutlookApp.GetNamespace("MAPI");
folderInbox = ns.GetDefaultFolder(Outlook.OlDefaultFolders.olFolderInbox);
folderSentMail = ns.GetDefaultFolder(
Outlook.OlDefaultFolders.olFolderSentMail);
scope = "\'" + folderInbox.FolderPath +
"\',\'" + folderSentMail.FolderPath + "\'";
advancedSearch = OutlookApp.AdvancedSearch(
scope, filter, true, advancedSearchTag);
System.Diagnostics.Debug.WriteLine(advancedSearch.Results.Count);
}
catch (System.Exception ex)
{
MessageBox.Show(ex.Message, "An exception is thrown!");
}
finally
{
if (advancedSearch != null) Marshal.ReleaseComObject(advancedSearch);
if (folderSentMail != null) Marshal.ReleaseComObject(folderSentMail);
if (folderInbox != null) Marshal.ReleaseComObject(folderInbox);
if (ns != null) Marshal.ReleaseComObject(ns);
}
return advancedSearch;
}
I was not waiting long enough for the results. When AdvancedSearch(which runs in a separate thread) is finished it fires off an event called AdvancedSearchComplete. I had to tell the code to handle the event in order to wait for the search to complete.
In RunAdvancedSearch I do this in the Try with this:
Application.AdvancedSearchComplete += Application_AdvancedSearchComplete;
Here is the whole thing.
string advancedSearchTag = "MY FOOFOO Search";
//SEARCH Function
Search RunAdvancedSearch(Outlook.Application Application, string wordInSubject)
{
string scope = "Inbox";
string filter = "urn:schemas:mailheader:subject LIKE \'%" + wordInSubject + "%\'";
Outlook.Search advancedSearch = null;
Outlook.MAPIFolder folderInbox = null;
Outlook.MAPIFolder folderSentMail = null;
Outlook.NameSpace ns = null;
try
{
ns = Application.GetNamespace("MAPI");
folderInbox = ns.GetDefaultFolder(Outlook.OlDefaultFolders.olFolderInbox);
folderSentMail = ns.GetDefaultFolder(Outlook.OlDefaultFolders.olFolderSentMail);
scope = "\'" + folderInbox.FolderPath + "\',\'" +
folderSentMail.FolderPath + "\'";
advancedSearch = Application.AdvancedSearch(
scope, filter, true, advancedSearchTag);
Application.AdvancedSearchComplete += Application_AdvancedSearchComplete;
}
catch (System.Exception ex)
{
MessageBox.Show(ex.Message, "An eexception is thrown");
}
finally
{
if (advancedSearch != null) Marshal.ReleaseComObject(advancedSearch);
if (folderSentMail != null) Marshal.ReleaseComObject(folderSentMail);
if (folderInbox != null) Marshal.ReleaseComObject(folderInbox);
if (ns != null) Marshal.ReleaseComObject(ns);
}
return advancedSearch;
}
//Handle AdvancedSearchComplete event
void Application_AdvancedSearchComplete(Outlook.Search SearchObject)
{
Outlook.Results advancedSearchResults = null;
Outlook.MailItem resultItem = null;
System.Text.StringBuilder strBuilder = null;
try
{
if (SearchObject.Tag == advancedSearchTag)
{
advancedSearchResults = SearchObject.Results;
System.Diagnostics.Debug.WriteLine("Count: " + advancedSearchResults.Count);
if (advancedSearchResults.Count > 0)
{
strBuilder = new System.Text.StringBuilder();
strBuilder.AppendLine("Number of items found: " +
advancedSearchResults.Count.ToString());
foreach (MailItem item in advancedSearchResults)
{
System.Diagnostics.Debug.WriteLine(item.Subject);
}
for (int i = 1; i <= advancedSearchResults.Count; i++)
{
resultItem = advancedSearchResults[i] as Outlook.MailItem;
if (resultItem != null)
{
strBuilder.Append("#" + i.ToString());
strBuilder.Append(" Subject: " + resultItem.Subject);
strBuilder.Append(" \t To: " + resultItem.To);
strBuilder.AppendLine(" \t Date: " +
resultItem.SentOn.ToString());
Marshal.ReleaseComObject(resultItem);
}
}
if (strBuilder.Length > 0)
System.Diagnostics.Debug.WriteLine(strBuilder.ToString());
else
System.Diagnostics.Debug.WriteLine(
"There are no Mail items found.");
}
else
{
System.Diagnostics.Debug.WriteLine("There are no items found.");
}
}
}
catch (System.Exception ex)
{
MessageBox.Show(ex.Message, "An exception is occured");
}
finally
{
if (resultItem != null) Marshal.ReleaseComObject(resultItem);
if (advancedSearchResults != null)
Marshal.ReleaseComObject(advancedSearchResults);
}
}
private void btnOutlookSrch_Click(object sender, EventArgs e)
{
Outlook.Application OLook = new Outlook.Application();
RunAdvancedSearch(OLook, "Hello?");
}
Your filter is working good, use Application:
private Search RunAdvancedSearch(Outlook.Application OutlookApp, string wordInSubject)
https://msdn.microsoft.com/en-us/library/office/microsoft.office.interop.outlook.application.aspx
Read about using _Application and Application in msdn "Remarks". There is very well written.
I have no idea.. why this occurs.
In debug mode it is running well .
however, now I am trying to run my project in IIS web server and
it doesn't runs well.
I can access the main page of my project. but when I try to access the local database, the following error shows up.
this is my log file and codes:
catch (Exception ex)
{
Debug.WriteLine("Error in integration: " + ex.Message);
Debug.Flush();
StreamWriter file2 = new StreamWriter("c:\\resources\\file.log", true);
file2.WriteLine("아님여기?"+ex.Message);
file2.Close(); //디버깅 계속................
}
In this catch I have the following error:
provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
I am sorry that I can not explain which line is generating this exception because there's no exception occurring in debug mode...
Here is the code for Page Load:
protected void Page_Load(object sender, EventArgs e)
{
this.Page.Form.Enctype = "multipart/form-data";
WA = Request.QueryString["WA"];
if (string.IsNullOrEmpty(WA)) WA = "off";
string qstr = null;
qstr = Request.QueryString["vCnt"]; //ㅇㅈ이파라메터 들은 어디서...??
if (qstr != null && qstr != "") vCnt = Int32.Parse(qstr);
if (!IsPostBack)
{
Keywords = Request.QueryString["keywords"]; //ㅇㅈ search main -> searh 버튼 클릭
VideoSearch = Request.QueryString["VideoSearch"];//ㅇㅈ ~^~^~
// 스마트폰에서 포스팅 되었을 때
if (Request.UserAgent.Contains("Android"))
{
if (Request.Cookies["VIDEOSEARCH"] != null && Request.Cookies["VIDEOSEARCH"].Value != "")
{
VideoSearch = Request.Cookies["VIDEOSEARCH"].Value;
MAM.Models.Utils.CookieManager("VIDEOSEARCH", "");
}
}
if (!String.IsNullOrEmpty(Keywords) && !Keywords.Contains("null")) SearchTextbox2.Text = Keywords;
Debug.WriteLine("search text is " + SearchTextbox2.Text);
Debug.Flush();
try
{
if (!string.IsNullOrEmpty(VideoSearch))
{
//ㅇㅈ DNA를 추출하여 유사 동영상을 돌려받음.
string results = RetrieveDNAfromVideo(System.Web.HttpUtility.UrlDecode(VideoSearch)/*video name*/);
string[] lines = results.Split(new string[] { "\r\n" }, StringSplitOptions.None);
vSearchResults = new List<VSearchResult>();
foreach (string line in lines)
{
string[] words = line.Split(',');
VSearchResult vSearchResult = new VSearchResult();
vSearchResult.VideoID = Int32.Parse(words[0]);
vSearchResult.idx = Int32.Parse(words[1]);
vSearchResult.RGBdifferce = Int32.Parse(words[2]);
vSearchResults.Add(vSearchResult);
} //ㅇㅈ vSearchResults : RetrieveDNAfromVideo가 알려준유사동영상정보
MAMDataContext db = new MAMDataContext();
List<int> VideoIDs = (List<int>)vSearchResults.Select(v => v.VideoID).ToList();
//vdo = (List<Video>)(from a in db.Video
// join b in vSearchResults
// on a.id equals b.VideoID
// orderby b.RGBdifferce
// select a).ToList();
vdo = (List<Video>)(from a in db.Videos
where VideoIDs.Contains(a.id)
select a).ToList(); //ㅇㅈ vdo는 결국, RetrieveDNAfromVideo가 알려준유사동영상정보-> id가 같은동영상들
vSearchResults2 = new List<VSearchResult2>();
VSearchResult v1 = null;
foreach (Video v in vdo)
{
VSearchResult2 v2 = new VSearchResult2();
v2.VideoID = v.id;
v2.overview = v.overview;
v2.title = v.title;
v2.filename720 = v.filename720;
v2.filename360 = v.filename360;
v1 = vSearchResults.Where(t => t.VideoID == v.id).OrderBy(t => t.RGBdifferce).FirstOrDefault();//ㅇㅈ ㅇㄱㅁㅇ
// ㅇㅈ RetrieveDNAfromVideo가 알려준유사동영상정보-> id가 같은동영상들[-> RGBdifferce가 가장작은 애] [] 무슨의미??
v2.idx = v1.idx;
v2.RGBdifferce = v1.RGBdifferce;
vSearchResults2.Add(v2);
}
Debug.WriteLine("Video Serach done");
Debug.Flush();
}
if (!string.IsNullOrEmpty(Keywords))
{
string ret2 = null;
string str1 = null;
if (string.IsNullOrEmpty(Keywords))
{
Keywords = SearchTextbox2.Text;
}
if (string.IsNullOrEmpty(str1)) str1 = Keywords; //ㅇㅈ str1 은 질의의도??
string[] searchTextArray = str1.Split(' ');
int cnt1 = searchTextArray.Count();
string st1 = ""; string st2 = ""; string st3 = "";
if (cnt1 > 0) st1 = searchTextArray[0];
if (cnt1 > 1) st2 = searchTextArray[1];
if (cnt1 > 2) st3 = searchTextArray[2];
MAMDataContext db = new MAMDataContext();
vdo = (List<Video>)db.Videos.Where(v => v.overview.Contains(st1)
|| (cnt1 > 1 ? v.overview.Contains(st2) : false)
|| (cnt1 > 2 ? v.overview.Contains(st3) : false)).ToList();//ㅇㅈ 검색어를 overview에 가지고 있는 동영상 리스트
vSearchResults2 = new List<VSearchResult2>();
foreach (Video v in vdo)
{
VSearchResult2 v2 = new VSearchResult2();
v2.VideoID = v.id;
v2.overview = v.overview;
v2.title = v.title;
v2.filename720 = v.filename720;
v2.filename360 = v.filename360;
v2.idx = 0;
v2.RGBdifferce = 0;
vSearchResults2.Add(v2);
}
Debug.WriteLine("Video Search");
}
}
catch (Exception ex)
{
Debug.WriteLine("Error in integration: " + ex.Message);
Debug.Flush();
StreamWriter file2 = new StreamWriter("c:\\resources\\file.log", true);
file2.WriteLine(ex.Message);
file2.Close(); //디버깅 계속................
}
Debug.WriteLine("Search End");
}
if (fUpload.PostedFile != null) //ㅇㅈ
{
fileupload1();
}
else
{
}
}
this is a guess because you did not provide a key information: the connection string.
my guess is that the application is using integrated authentication hence while debugging the access to the database is done using your credentials: as the developer you are likely allowed to do almost everything on the db so the application works correctly.
when the application is deployed the login to the database is performed using the credentials of the application pool used to run the application itself.
as a test you can change the user of the application pool on the iis server to use an account enabled on the db and retry to login.
there are two solutions:
- configure the application pool to use a specific windows user that is allowed to interact with the db
- change the connection string to log onto the db as a sql user (allowed to interact with the db)
I have a button click event in code behind file as follows:
protected void btnArchive_Click(object sender, EventArgs e)
{
try
{
if (projectId == 0)
{
return;
}
Int32 serverPathId = 0;
ProjectArchiveResponse archiveResponse;
if (!int.TryParse(this.ddlSourceServer.SelectedValue, out serverPathId))
return;
if (string.IsNullOrEmpty(hidFileCount.Value))
{
this.ShowMsg(this.divMessage, Resources.Resource.ProjectFileArchiveNotAllowed, MessageType.Failed);
//The project files couldn't be archived until archive operation was completed.
return;
}
ProjectManager projectManager = new ProjectManager(null, BasePage.GetCurrentUser(), null) { IsServiceCall = false};
try
{
archiveResponse = projectManager.StartProjectArchive(projectId, false, () =>
{
foreach (Control control in tdFileList.Controls.Cast<Control>())
{
if (control is Dell.AFP.UserControl.ProjectFileListBaseControl)
{
((ProjectFileListBaseControl)control).Refresh();
}
}
}, false);
if (archiveResponse.MassivePackageID > 0)
{
this.ViewState["transferPackageId"] = archiveResponse.MassivePackageID;
PopupMonitor(archiveResponse.MassivePackageID);
}
//handled for any erorrs while submitting massive package or any unhandled exceptions will be taken care here
if (archiveResponse._CustomError != null && !string.IsNullOrEmpty(archiveResponse._CustomError.Erorrmessage))
{
if (!archiveResponse._CustomError._Erorrtype.Equals(MessageType.Info))
logger.ErrorFormat("Error occurred with details : {0}", archiveResponse._CustomError.Erorrmessage);
ShowMsg(divMessage, archiveResponse._CustomError.Erorrmessage, (MessageType)archiveResponse._CustomError._Erorrtype);
}
}
catch (KnownErrorException ke)
{
//logger.Fatal("UnExpected exception occured. Exception Details " + ke.Message);
logger.Fatal(ke.Message);
if (ke.Error.Type.Equals(DELL.AFP.Management.Exceptions.ErrorType.Warning))
this.ShowMsg(this.divMessage, ke.Message, MessageType.Info);
else
this.ShowMsg(this.divMessage, ke.Message, MessageType.Failed);
}
catch (Exception ke)
{
logger.ErrorFormat("UnExpected exception has occured with details : {0} - {1}", ke.Message, ke.StackTrace);
//ShowMsg(divMessage, "UnExpected exception has occured. Details are logged. Please try after sometime", MessageType.Failed);
ShowMsg(divMessage,ke.Message, MessageType.Failed);
}
}
In this event I am calling a method StartProjectArchive which is in ProjectManager.cs file
StartProjectArchive method in ProjectManager.cs is as follows:
public ProjectArchiveResponse StartProjectArchive(int projectID, bool promoteAfterArchive, Action uiRefresh, bool waitTillTransfered, string archiveNotificationUrl = null)
{
ProjectArchiveResponse projectArchiveResponse = new ProjectArchiveResponse() { ProjectID = projectID, MassivePackageID = -1 };
string sourceServerPath = String.Empty;
int packageID =0;
Int32 sourceServerPathID = GetSourceServerPath(projectID, out sourceServerPath);
var filesWhichNeedsToBeArchived = GetFilesWhichNeedsToBeArchived(projectID, sourceServerPathID, uiRefresh);
if (objFilesNotInSourceServer != null && objFilesNotInSourceServer.Count > 0)
KnownErrorException.Throw("ePRJARCMISSFILE01", string.Join(",", objFilesNotInSourceServer.ToArray()));
if (filesWhichNeedsToBeArchived != null)
{
MassiveServiceClientProxy proxy = new MassiveServiceClientProxy();
Dictionary<string, string> files = new Dictionary<string, string>();
filesWhichNeedsToBeArchived.Select(file => new
{
SourcePath = file.FileName,
DestinationPath = Path.Combine(ConfigurationManager.AppSettings["ArchiveProcessPrefixFolder"],
Path.GetDirectoryName(file.FileName), Path.GetFileName(file.FileName),
projectFilelist.Where(pf => string.Compare(pf.FileName, file.FileName, true) == 0).First().VersionID.ToString(),
Path.GetFileName(file.FileName))
}).ToList().
ForEach(file =>
{
if (!files.ContainsKey(file.SourcePath))
files.Add(file.SourcePath, file.DestinationPath);
});
if (files.Count > 0)
{
string packageDescription = "AFP 4.0: " + projectID.ToString(),
targetServerGroupName = archiveServer.MassiveServerGroupName,
userSuppliedId = "AFP 4.0: " + EndUserInfo.UserName;
try
{
packageID = proxy.SubmitPackageWithDestinationPath(files, packageDescription, new[] { sourceServerPath },
targetServerGroupName, userSuppliedId, MassiveService.MassivePriority.URGENT, true);
}
catch (Exception ex)
{
if (IsServiceCall == true)
KnownErrorException.Throw("wPRJARCMASER01");
else
return new ProjectArchiveResponse() { _CustomError = new CustomError { _Erorrtype = Model.ErrorType.Failed, Erorrmessage = ex.Message } };
}
if (packageID > 0)
{
ProjectFileBizManager projectFileBM = new ProjectFileBizManager();
projectFileBM.InsertArchiveTransferPackageByProjectFileList(
GetProjectFileIDsByFileName(projectID, filesWhichNeedsToBeArchived.Select(file => file.FileName).ToArray()), filesWhichNeedsToBeArchived.Select(file => file.FileName).ToArray(), packageID, projectID, EndUserInfo.UserId);
TransferPackageBizManager transferPackageBM = new TransferPackageBizManager();
if (promoteAfterArchive)
{
transferPackageBM.UpdateTransferPackageFeature(packageID, promoteAfterArchive);
}
projectArchiveResponse.MassivePackageID = packageID;
if (waitTillTransfered)
{
Task<ProjectArchiveResponse> mainTask = Task<ProjectArchiveResponse>.Factory.StartNew(
() =>
{
Task<Enums.TransferStatusEnum> packageTransfer = Task<Enums.TransferStatusEnum>.Factory.StartNew(
() =>
{
try
{
TransferPackage transferPackage = null;
while (true)
{
transferPackage = transferPackageBM.GetTransferPackage(packageID);
if (transferPackage.TransferStatus.TransferStatusId == (int)Enums.TransferStatusEnum.Submitted || transferPackage.TransferStatus.TransferStatusId == (int)Enums.TransferStatusEnum.Transferring)
Thread.Sleep(8000);
else
break;
}
logger.DebugFormat("Massive package status : {0} for Package : {1}", (Enums.TransferStatusEnum)transferPackage.TransferStatus.TransferStatusId, transferPackage.TransferPackageId);
return (Enums.TransferStatusEnum)transferPackage.TransferStatus.TransferStatusId;
}
catch (Exception exp)
{
logger.ErrorFormat("Project Archive Error, while trying to find massive package status : {0}", exp);
return Enums.TransferStatusEnum.Submitted;
}
});
try
{
Int32 timeOutInMins = (ConfigurationManager.AppSettings["ProjectArchive_PackageMonitorTimeoutInMinutes"] == null) ? 60 :
Convert.ToInt32(ConfigurationManager.AppSettings["ProjectArchive_PackageMonitorTimeoutInMinutes"]);
if (!Task.WaitAll(new Task[] { packageTransfer }, timeOutInMins * 60 * 1000))
{
projectArchiveResponse.Timedout = true;
projectArchiveResponse.TransferStatus = Enums.TransferStatusEnum.Submitted;
}
else
projectArchiveResponse.TransferStatus = packageTransfer.Result;
logger.DebugFormat("Project Archive Response, Project ID: {0}\n Package ID : {1},\n IsTimedout : {2},\n Timeout value : {3} minutes, \n Transfer Status : {4}", projectArchiveResponse.ProjectID, projectArchiveResponse.MassivePackageID, projectArchiveResponse.Timedout, timeOutInMins, projectArchiveResponse.TransferStatus);
}
catch (Exception exp)
{
logger.ErrorFormat("Project Archive Error, while waiting to fetch massive package status : {0}", exp);
}
return projectArchiveResponse;
});
if (!string.IsNullOrEmpty(archiveNotificationUrl))
{
mainTask.ContinueWith((a) =>
{
try
{
AFPArchiveNotifyProxy archiveNotification = new AFPArchiveNotifyProxy();
ArchiveNotificationService.ProjectArchiveResponse archiveResponse = new ArchiveNotificationService.ProjectArchiveResponse()
{
MassivePackageID = a.Result.MassivePackageID,
ProjectID = a.Result.ProjectID,
IsTimedout = a.Result.Timedout,
ArchiveStatus = (Enum.Parse(typeof(ArchiveNotificationService.ArchiveStatusEnum), (a.Result.TransferStatus.ToString())) as ArchiveNotificationService.ArchiveStatusEnum?).Value
};
MassiveServiceClientProxy massiveServiceClientProxy = new MassiveServiceClientProxy();
FileTransferRequest[] fileTransferRequests = massiveServiceClientProxy.GetFileStatus(a.Result.MassivePackageID);
archiveResponse.Files = fileTransferRequests.Select(f => f.FileName).ToArray();
archiveNotification.ProjectArchiveUpdate(archiveNotificationUrl, archiveResponse);
logger.DebugFormat("Project Archive Response Notification, Project ID: {0}\n Package ID : {1},\n IsTimedout : {2},\n Archive Status :{3},\n Notification Url : {4},\n Total Files : {5}", archiveResponse.ProjectID, archiveResponse.MassivePackageID, archiveResponse.IsTimedout, archiveResponse.ArchiveStatus, archiveNotificationUrl, archiveResponse.Files.Count());
logger.DebugFormat("Package ID : {0}, Files : {1}", archiveResponse.MassivePackageID, string.Join(",", archiveResponse.Files.ToArray()));
}
catch (Exception exp)
{
logger.ErrorFormat("Project Archive Error, while invoking archive notification : {0}", exp);
}
});
projectArchiveResponse.TransferStatus = Enums.TransferStatusEnum.Submitted;
return projectArchiveResponse;
}
else
{
mainTask.Wait();
}
}
}
else
{
if (IsServiceCall == true)
KnownErrorException.Throw("ePRJARCMASS01");
else
return new ProjectArchiveResponse() { _CustomError = new CustomError { _Erorrtype = Model.ErrorType.Failed, Erorrmessage = "Massive has not returned the massive packageid" } };
}
}
else
{
// this.ShowMsg(this.divMessage, Resources.Resource.NoFilesToArchive, MessageType.Info);
if (IsServiceCall == true)
KnownErrorException.Throw("wPRJARCNOFILES01");
else
return new ProjectArchiveResponse() { _CustomError = new CustomError { _Erorrtype = Model.ErrorType.Info, Erorrmessage = "There are no files to archive" } };
}
}
return projectArchiveResponse;
}
In this we are taking a parameter as "Action uiRefresh" . we are calling this uiRefresh as method in GetFilesWhichNeedsToBeArchived which was in startArchiveProject method. This Refresh method in tunrn calls the method in code behind file. This was passed as a control when we are invoking startArchiveProject in code behind file. Now I have one more thing which I need to implement. I have a method Pop-Up files in code behind file. I need to call that in ProjectManager.cs class inside the Method GetFilesWhichNeedsTobeArchive. In that pop-up I will have a button and checkboxes. Upon the selection user I need to get the details from pop-up and then I have to continue with the remaining execution in ProjectManger.cs page.
Can someone help on this?
Assuming that you have a button named btnArchive then the add click event subscription, pointing to the method you have (which looks like click-event handle proc)
btnArchive.Click+=(s,e)=>btnArchive_Click(s,e);
Regards
I have a sample code I got from a documentation provided by a merchant. I think the code is in C#. I need to write a code for PHP but I don't have any idea about C# so I'm having a problem with this. I've tried to write a PHP code for this but it doesn't seem right.
By the way, this is a webservice kind of setup and it uses WCF to expose various endpoints. Here's the endpoint they've provided to me: http://services.scorpion.biz/Public/Leads/ExternalLead.svc
Here's the C# code:
public bool SubmitLead(string contactName, string contactNumber) {
bool outcome = false;
string message = string.Empty;
if (contactNumber.Length <= 9) {
message = "Telephone number is too short";
outcome = false;
} else if (contactNumber.Length > 11) {
message = "Telephone number is too long";
outcome = false;
} else if (contactNumber.Length == 10 && contactNumber[0] != '0') {
message = "Telephone must start with a ZERO";
outcome = false;
} else if (contactNumber.Length == 11 && contactNumber.Substring(0, 2) != "27") {
message = "Telephone must start with a 27";
outcome = false;
} else {
WSExternalLead.LeadRequestMessage request = new
WSExternalLead.LeadRequestMessage();
request.Message = “Your Keyword” + ". Contact Name: " + contactName + ".
Contact Number: " + contactNumber;
request.TelephoneNumber = contactNumber;
request.Network = “IMU”;
request.ReceivedTime = DateTime.Now;
using (WSExternalLead.ExternalLeadClient client = new WSExternalLead.ExternalLeadClient()) {
try {
WSExternalLead.LeadResponseMessage response = null;
response = client.GenerateLead(request);
if (response.Result != true) {
message = "We were unable to process your request at this
time. Error: " + response.ErrorMessage;
outcome = false;
} else {
message = "Thank you for your interest in Scorpion Legal
Protection. We will get back to you shortly.";
outcome = true;
}
} catch (FaultException fx) {
message = "We were unable to process your request at this time.
Fault: " + fx.Message;
outcome = false;
} catch (Exception ex) {
message = "We were unable to process your request at this time.
Exception: " + ex.Message;
outcome = false;
}
}
}
HttpContext.Current.Session["OUTCOME"] = outcome;
HttpContext.Current.Session["MESSAGE"] = message;
return outcome;
}
Here's the PHP code that I've written:
// Read values to variables
$username = $_GET['un'];
$usersurname = $_GET['ul'];
$phonesubmit= $_GET['up'];
$useremail = $_GET['ue'];
$aff_id = $_GET['aff'];
$unique_id = $_GET['uid'];
$rdate = date('m/d/Y G:i:s');
$rdate = date("c", strtotime($rdate));
$wsdlFile = "http://services.scorpion.biz/Public/Leads/ExternalLead.svc?WSDL";
$client = new SoapClient($wsdlFile);
$variables->TelephoneNumber = $phonesubmit;
$variables->Message = "IMU. Name: $username $usersurname. Contact Number: $phonesubmit";
$variables->Network = "IMU";
$variables->ReceivedTime = $rdate;
$result = $client->GenerateLead($variables);
$returnMessage = $result->Result;
$returnMessage = trim($returnMessage);
if ($returnMessage == ""){
$returnMessage = $result->ErrorMessage;
}
Any idea on how to solve this would be greatly appreciated. Thanks.