I have been working on this project in Visual Studio 2010 using C# a few days before Windows 10 update and it worked fine but now when I try to run the program and it tells me the following :
The type or name of the 'Drawing' namespace does not exist in the
'Tekla.Structures' namespace (missing an assembly reference?)
and the same for Tekla.Structures.Model, Tekla.Structures.Model.Operations ... as you can see in the following image:
What I am doing is removing the references and adding them again and in this way the program recognizes it well, but if I clean the solution and try to generate the solution again, the problem arises again ...
What could be the problem?
It seems that you want to use Tekla reference correctly.
I suggest that you can use NugetPackage.
First, right click->References->choose Manage Nuget packages.
Second, choose the Browse->input 'TeklaOpenAPI' in textbox and choose the first.
Third, click install.
Finally after it has been installed, you will see the following correct using code without warning.
first you remove tekla references, select and right click, then remove
remove reference
after right click on References and add reference
add references
after you need add dll corresponding the version you want execute
select references
pay attention when building the app, it only runs in the version you chose the dlls.
I would like to remove a step of the process when building libraries in C# with Visual Studio, like how the System libraries can simply be referenced by adding the statement: using System to the top of the file.
Normally when building a class library, you have to add a reference to the library in the project you want to consume the library from, and then you can add the using statement on the top of the file you wish to reference the library from.
Is there some way to remove the step of needing to explicitly add a reference (the step accomplishable via a right click on the project in the solution explorer in Visual Studio)? Perhaps by building class libraries to a specific location that Visual Studio automatically adds as referenced when creating new projects to consume the library?
The end goal is to be able to write C# class libraries, and simply have them available whenever I am writing an app, without needing to explicitly add a reference to each library in each new app I write. Whenever I want to edit a library, I could simply open that Visual Studio project, edit it, and then build it again. Then the updated library is available to all of the apps I have consuming that library.
I'm not sure why would you want to do this, cause it's a simple thing to set the using statements in the top of the page. But i'm almost certain that you can't get arround this.
This post states that: answer to get around of using statements
I am using the MagicLibrary for a few components. I knew it was written in Visual Studio 2003 and recompiled it in Visual C# Express 2010. It compiled just fine and I could see the library in the folder.
I then created a new project in Visual C# Express 2010 and added the components MagicalLocalLibrary.dll to the Toolbox. They appeared fine with no errors. I put in a control from the Toolbox to my form, and it seemed fine. I then debugged (to see if any errors would occur) and I saw that the reference MagicalLibrary disappeared and I got the error:
The type or namespace name 'Crownwood' could not be found (are you missing a using directive or an assembly reference?)
The thing is that, the reference shows fine under References in Solution Explorer but I can't import it with using or use it in the code (simply is not listed in InstelliSense either) but if i go into the Object Browser and choose "My Solution" it is not listed. I can click on the Reference in Solution Explorer and just change the Copy Local property to True or False, then it will appear in the Object Browser but whenever I debug my project again it disappear.
Any idea why it does this? Thanks in advance.
Check that you are using the .Net 4 framework and not the client profile version
You find that setting when you right-click on your project, choose properties. And under application there is a setting for target framework. If you have chosen the .Net 4 framework Client Profile, then this behavior that you described can happen
I ran into a very similar issue once. In my case the problem turned out to be a missing dependency for the "vanishing" namespace's assembly. What finally gave me the information I needed was the suggestion in this StackOverflow answer to raise the MSBuild output verbosity level. After raising the verbosity setting the IDE should give you a more specific reason why the compilation fails.
I have a solution that contains a website and a class library in Visual Studio 2008.
I then have another web site project outside of the solution that needs to reference the class library. I right click the Bin folder or Project and select Add Reference, then select my Class Library Project, it adds the 15 or so DLLs that the class library needs to the websites bin folder, but none of the .cs files recognize the using statements.
using MyLibrary.MyFolder;
It says that it can't resolve it, and ReSharper just says it can be safely removed since it's not being used.
ReSharper can recognize that it needs the reference and suggests that it "Reference MyLibrary and use MyFolder". I'm not sure why it's suggesting I add a reference I already have. When I go with the suggestion, I get the error
"Failed to reference module. Probably, reference will produce circular dependencies between projects."
I've tried going to the websites property pages and removing all the references and re-adding them, but it gives the same errors. Any ideas why this isn't working?
Also, check that the new solution's projects run against a compatible framework to the project you're trying to include. I was trying to include a reference to a 4.0 project in a 3.5 project.
I found how to fix this issue (for me at least). Why it worked, I'm not sure, but it did. (I just tried against a second website that was having the same problem and the following solution worked for that as well).
I tried the normal cleaning of the projects and rebuilding, shutting down all my Visual Studio instances and restarting them, even tried restarting my computer.
What actually worked was opening up the project in Visual Studio, closing all the open tabs, and then shutting it down.
Before I had left the tabs open because I didn't think it mattered (and I hardly ever close the tabs I'm using).
One possibility is that the target .NET Framework version of the class library is higher than that of the project.
I had a similar problem, will all my references being buggered up by Resharper - The solution which worked for me is to clear the Resharper Cache and then restarting VS
tools->options->resharper->options-> general-> click the clear caches button and restart VS
I had a similar problems where VS would sometimes build and sometimes not. After some searching and attempts I discovered that I had an ambiguous reference to a class with the same name in different libraries ('FileManager'). The project that would not build were my Unit Tests that reference all modules in my solution. Enforcing the reference to a specific module sorted things out for me.
My point is: Rather than blaming ReSharper or VS, it may be a good idea to double check if there really isn't some kind of circular reference somehow. More than often, classes with the same names in different modules could cause confusion and is often a symptom of bad design (like in my case).
This sounds like a similar issue with ReSharper:
http://www.jetbrains.net/devnet/thread/275827
According to one user in the thread forcing a build fixes the issue (CTRL+Shift+B) after the first build..
Sounds like an issue with ReSharper specifically in their case.. Have you tried building regardless of the warnings and possible false errors?
Since they are both in the same solution, instead of adding a reference to the DLL, add a reference to the class library project itself (the Add Reference dialog will have a tab for this).
Ahh, it's a different solution. Missed that. How about you try instead of adding a reference to the project addding a reference to the compiled DLL of your class library. The Add Reference dialog has a Browse tab which does this.
After confirming the same version of asp.net was being used. I removed the project. cleaned the solution and re-added the project. this is what worked for me.
If you're referencing assemblies for projects that are in the same solution, add a Project reference (using the "Projects" tab) rather than browsing for the dll in the \bin\Debug (or \bin\Release) folder (using the "Browse" tab). See screen shot below. Only browse for the assembly/dll file if it's considered an external assembly.
I deleted *.csproj.user ( resharper file) of my project, then, close all tabs and reopen it. After that I was able to compile my project and there was no resharper warnings.
I had this problem. It took me ages to figure out. I had people over my shoulder to help. We rebuilt, cleaned and restarted Visual studio and this didn't fix it. We removed and re-added the references...
All to no avail.... Until!
The solution to my problem was that my class declaration was spelt incorrectly.
Before you start judging me harshly, allow me to explain why it wasn't stupid, and also why this mistake could be made by even the most intelligent of programmers.
Since the mistake was early on in the name, it wasn't appearing in the intellisense class listing when I began typing.
e.g.
Class name:
Message.cs
Declaration:
public class Massage
{
//code here
}
At a glance and in a small font, Massage looks identical to Message.
Typing M listed too many classes, so I typed e, which didn't appear in the mistyped version, which gave the impression that the class wasn't being picked up by the compiler.
I had a similar issue in VS 2010, when creating a test project for an MVC 2 application.
The symptoms were identical.
The message from ReSharper was somewhat misleading. For a moment I completely ignored ReSharper and did it the "manual VS way":
I cleaned the solution.
I manually added the reference to the MVC project.
I manually added the using directives.
ctrl-shift-b
At this stage I got a compilation error: I should have referenced the System.Web.Mvc assembly in my test project (sigh). Adding this reference causes the project to compile. The ReSharper issues remain, but the ReSharper test runner works.
When I restart VS, the ReSharper errors are gone too. I'm not sure if the restart is required - simply closing the .cs file might be enough.
From now on, when I see the ReSharper message
Failed to reference module. Probably,
reference will produce circular
dependencies between projects.
I'll read
Failed to reference module. Probably,
reference will produce circular
dependencies between projects,
or you are missing some references to dependencies of the reference's dependencies.
Another possible fix that just worked for me:
If you have Assembly A, which references Assembly B, both of which reference a non-project (external) assembly X, and Assembly B's code will not recognize that you have referenced X, then try the following steps in order:
Drop reference to X from BOTH A and B
Recreate reference to X in B
Recreate reference to X in A
Apparently, VS will not recognize a reference to an external assembly in a project that is a dependency of another project that already references the external. By setting up the references again from the ground up, you overcome this. It's just very odd.
I faced this problem, and I solved it by closing visual studio, reopening visual studio, cleaning and rebuilding the solution. This worked for me.
If using TFS, performing a Get latest (recursive) doesn't always work. Instead, I force a get latest by clicking Source control => Get specific version then clicking both boxes. This tends to work.
If it still doesn't work then deleting the suo file (usually found in the same place as the solution) forces visual studio to get all the files from the source (and subsequently rebuild the suo file).
If that doesn't work then try closing all your open files and closing Visual studio. When you next open Visual studio it should be fixed. There is a resharper bug that is resolved this way.
I had stumbled upon a similar issue recently. I am working in Visual Studio 2015 with Resharper Ultimate 2016.1.2. I was trying to add a new class to my code base while trying to reference a class from another assembly but Resharper would throw an error for that package.
With some help of a co-worker, I figured out that the referenced class existed in the global namespace and wasn't accessible from the new class since it was hidden by another entity of same name that existed in current namespace.
Adding a 'global::' keyword before the required namespace helped me to reference the class I was actually looking for. More details on this can be found on the page listed below:
https://msdn.microsoft.com/en-us/library/c3ay4x3d.aspx
If both projects are contained within the same solution, it will be more apropiate if you add the reference for the project you need, not its compiled dll.
I had the exact same problem.
I tried closing Visual Studio numerous times, I tried deleting and adding a new class library.Checked if I had the right version, if I had referenced it in the target project. Nothing worked.
Then I thought maybe, just maybe I cannot reference the library because it was empty... and that was it.
As soon as I added a class to it the problem was fixed. So if you have tried everything and you are close to losing your sanity. Just try adding something to the class library.
the solution for was just adding the access modifier
my class didnt have any access modifier then i just added public and it worked!
Contracts class library:
namespace Contracts
{
public interface ILoggerManager
{
void LogInfo(string message);
void LogWarn(string message);
void LogDebug(string message);
void LogError(string message);
}
}
Logger service class library:
using Contracts;
using NLog;
public class LoggerManager : ILoggerManager
{
private static NLog.ILogger logger = LogManager.GetCurrentClassLogger();
public LoggerManager()
{
}
}
I tried various solutions for this issue. An old WebForms application refused to acknowledge the existence of a library even though a reference existed.
Oddly, what worked was to add and reference the class library in Visual Studio 2022, safe the project, then reopen in an earlier version of Visual Studio.
My solution was simple, but I'll share it in case someone else has the same issue and finds this question by googling like I did.
It turns out that the most recent build of the supporting DLL was done in Debug mode, and my code was looking at the Release version of the DLL. I rebuilt the DLL in Release mode and all is working properly.
Unfortunately the only thing that worked for me was completely deleting and recreating the class library project, after having temporarily copied the class files in it elsewhere. Only then would the ASP.Net web project recognise the using statements that referred to the class library project. This was with Visual Studio 2010, not using ReSharper.
I had similar issue. What worked for me is that I had added wrong Class Library from visual studio. I added by using the search feature of visual studio.
What I needed to do was Add New Project > Visual C# > Class Library. And this newly added class library is the right one and can now be added as reference to any project.
You may forget to add reference the class library which you needed to import.
Right click the class library which you want to import in (which contains multiple imported class libraries), -->Add->Reference(Select Projects->Solution->select the class library which you want to import from->OK)