Related
How to calculate the difference in months between two dates in C#?
Is there is equivalent of VB's DateDiff() method in C#. I need to find difference in months between two dates that are years apart. The documentation says that I can use TimeSpan like:
TimeSpan ts = date1 - date2;
but this gives me data in Days. I don't want to divide this number by 30 because not every month is 30 days and since the two operand values are quite apart from each other, I am afraid dividing by 30 might give me a wrong value.
Any suggestions?
Assuming the day of the month is irrelevant (i.e. the diff between 2011.1.1 and 2010.12.31 is 1), with date1 > date2 giving a positive value and date2 > date1 a negative value
((date1.Year - date2.Year) * 12) + date1.Month - date2.Month
Or, assuming you want an approximate number of 'average months' between the two dates, the following should work for all but very huge date differences.
date1.Subtract(date2).Days / (365.25 / 12)
Note, if you were to use the latter solution then your unit tests should state the widest date range which your application is designed to work with and validate the results of the calculation accordingly.
Update (with thanks to Gary)
If using the 'average months' method, a slightly more accurate number to use for the 'average number of days per year' is 365.2425.
Here is a comprehensive solution to return a DateTimeSpan, similar to a TimeSpan, except that it includes all the date components in addition to the time components.
Usage:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
var dateSpan = DateTimeSpan.CompareDates(compareTo, now);
Console.WriteLine("Years: " + dateSpan.Years);
Console.WriteLine("Months: " + dateSpan.Months);
Console.WriteLine("Days: " + dateSpan.Days);
Console.WriteLine("Hours: " + dateSpan.Hours);
Console.WriteLine("Minutes: " + dateSpan.Minutes);
Console.WriteLine("Seconds: " + dateSpan.Seconds);
Console.WriteLine("Milliseconds: " + dateSpan.Milliseconds);
}
Outputs:
Years: 1
Months: 5
Days: 27
Hours: 1
Minutes: 36
Seconds: 50
Milliseconds: 0
For convenience, I've lumped the logic into the DateTimeSpan struct, but you may move the method CompareDates wherever you see fit. Also note, it doesn't matter which date comes before the other.
public struct DateTimeSpan
{
public int Years { get; }
public int Months { get; }
public int Days { get; }
public int Hours { get; }
public int Minutes { get; }
public int Seconds { get; }
public int Milliseconds { get; }
public DateTimeSpan(int years, int months, int days, int hours, int minutes, int seconds, int milliseconds)
{
Years = years;
Months = months;
Days = days;
Hours = hours;
Minutes = minutes;
Seconds = seconds;
Milliseconds = milliseconds;
}
enum Phase { Years, Months, Days, Done }
public static DateTimeSpan CompareDates(DateTime date1, DateTime date2)
{
if (date2 < date1)
{
var sub = date1;
date1 = date2;
date2 = sub;
}
DateTime current = date1;
int years = 0;
int months = 0;
int days = 0;
Phase phase = Phase.Years;
DateTimeSpan span = new DateTimeSpan();
int officialDay = current.Day;
while (phase != Phase.Done)
{
switch (phase)
{
case Phase.Years:
if (current.AddYears(years + 1) > date2)
{
phase = Phase.Months;
current = current.AddYears(years);
}
else
{
years++;
}
break;
case Phase.Months:
if (current.AddMonths(months + 1) > date2)
{
phase = Phase.Days;
current = current.AddMonths(months);
if (current.Day < officialDay && officialDay <= DateTime.DaysInMonth(current.Year, current.Month))
current = current.AddDays(officialDay - current.Day);
}
else
{
months++;
}
break;
case Phase.Days:
if (current.AddDays(days + 1) > date2)
{
current = current.AddDays(days);
var timespan = date2 - current;
span = new DateTimeSpan(years, months, days, timespan.Hours, timespan.Minutes, timespan.Seconds, timespan.Milliseconds);
phase = Phase.Done;
}
else
{
days++;
}
break;
}
}
return span;
}
}
You could do
if ( date1.AddMonths(x) > date2 )
If you want the exact number of full months, always positive (2000-01-15, 2000-02-14 returns 0), considering a full month is when you reach the same day the next month (something like the age calculation)
public static int GetMonthsBetween(DateTime from, DateTime to)
{
if (from > to) return GetMonthsBetween(to, from);
var monthDiff = Math.Abs((to.Year * 12 + (to.Month - 1)) - (from.Year * 12 + (from.Month - 1)));
if (from.AddMonths(monthDiff) > to || to.Day < from.Day)
{
return monthDiff - 1;
}
else
{
return monthDiff;
}
}
Edit reason: the old code was not correct in some cases like :
new { From = new DateTime(1900, 8, 31), To = new DateTime(1901, 8, 30), Result = 11 },
Test cases I used to test the function:
var tests = new[]
{
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 1, 1), Result = 0 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 1, 2), Result = 0 },
new { From = new DateTime(1900, 1, 2), To = new DateTime(1900, 1, 1), Result = 0 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 2, 1), Result = 1 },
new { From = new DateTime(1900, 2, 1), To = new DateTime(1900, 1, 1), Result = 1 },
new { From = new DateTime(1900, 1, 31), To = new DateTime(1900, 2, 1), Result = 0 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1900, 9, 30), Result = 0 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1900, 10, 1), Result = 1 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1901, 1, 1), Result = 12 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1911, 1, 1), Result = 132 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1901, 8, 30), Result = 11 },
};
I checked the usage of this method in VB.NET via MSDN and it seems that it has a lot of usages. There is no such a built-in method in C#. (Even it's not a good idea) you can call VB's in C#.
Add Microsoft.VisualBasic.dll to
your project as a reference
use
Microsoft.VisualBasic.DateAndTime.DateDiff
in your code
Use Noda Time:
LocalDate start = new LocalDate(2013, 1, 5);
LocalDate end = new LocalDate(2014, 6, 1);
Period period = Period.Between(start, end, PeriodUnits.Months);
Console.WriteLine(period.Months); // 16
(example source)
To get difference in months (both start and end inclusive), irrespective of dates:
DateTime start = new DateTime(2013, 1, 1);
DateTime end = new DateTime(2014, 2, 1);
var diffMonths = (end.Month + end.Year * 12) - (start.Month + start.Year * 12);
I just needed something simple to cater for e.g. employment dates where only the month/year is entered, so wanted distinct years and months worked in. This is what I use, here for usefullness only
public static YearsMonths YearMonthDiff(DateTime startDate, DateTime endDate) {
int monthDiff = ((endDate.Year * 12) + endDate.Month) - ((startDate.Year * 12) + startDate.Month) + 1;
int years = (int)Math.Floor((decimal) (monthDiff / 12));
int months = monthDiff % 12;
return new YearsMonths {
TotalMonths = monthDiff,
Years = years,
Months = months
};
}
.NET Fiddle
You can use Noda Time https://nodatime.org/
LocalDate start = new LocalDate(2010, 1, 5);
LocalDate end = new LocalDate(2012, 6, 1);
Period period = Period.Between(start, end, PeriodUnits.Months);
Console.WriteLine(period.Months);
You can use the DateDiff class of the Time Period Library for .NET:
// ----------------------------------------------------------------------
public void DateDiffSample()
{
DateTime date1 = new DateTime( 2009, 11, 8, 7, 13, 59 );
DateTime date2 = new DateTime( 2011, 3, 20, 19, 55, 28 );
DateDiff dateDiff = new DateDiff( date1, date2 );
// differences
Console.WriteLine( "DateDiff.Months: {0}", dateDiff.Months );
// > DateDiff.Months: 16
// elapsed
Console.WriteLine( "DateDiff.ElapsedMonths: {0}", dateDiff.ElapsedMonths );
// > DateDiff.ElapsedMonths: 4
// description
Console.WriteLine( "DateDiff.GetDescription(6): {0}", dateDiff.GetDescription( 6 ) );
// > DateDiff.GetDescription(6): 1 Year 4 Months 12 Days 12 Hours 41 Mins 29 Secs
} // DateDiffSample
Here is my contribution to get difference in Months that I've found to be accurate:
namespace System
{
public static class DateTimeExtensions
{
public static Int32 DiffMonths( this DateTime start, DateTime end )
{
Int32 months = 0;
DateTime tmp = start;
while ( tmp < end )
{
months++;
tmp = tmp.AddMonths( 1 );
}
return months;
}
}
}
Usage:
Int32 months = DateTime.Now.DiffMonths( DateTime.Now.AddYears( 5 ) );
You can create another method called DiffYears and apply exactly the same logic as above and AddYears instead of AddMonths in the while loop.
This worked for what I needed it for. The day of month didn't matter in my case because it always happens to be the last day of the month.
public static int MonthDiff(DateTime d1, DateTime d2){
int retVal = 0;
if (d1.Month<d2.Month)
{
retVal = (d1.Month + 12) - d2.Month;
retVal += ((d1.Year - 1) - d2.Year)*12;
}
else
{
retVal = d1.Month - d2.Month;
retVal += (d1.Year - d2.Year)*12;
}
//// Calculate the number of years represented and multiply by 12
//// Substract the month number from the total
//// Substract the difference of the second month and 12 from the total
//retVal = (d1.Year - d2.Year) * 12;
//retVal = retVal - d1.Month;
//retVal = retVal - (12 - d2.Month);
return retVal;
}
There's 3 cases: same year, previous year and other years.
If the day of the month does not matter...
public int GetTotalNumberOfMonths(DateTime start, DateTime end)
{
// work with dates in the right order
if (start > end)
{
var swapper = start;
start = end;
end = swapper;
}
switch (end.Year - start.Year)
{
case 0: // Same year
return end.Month - start.Month;
case 1: // last year
return (12 - start.Month) + end.Month;
default:
return 12 * (3 - (end.Year - start.Year)) + (12 - start.Month) + end.Month;
}
}
The most precise way is this that return difference in months by fraction :
private double ReturnDiffereceBetweenTwoDatesInMonths(DateTime startDateTime, DateTime endDateTime)
{
double result = 0;
double days = 0;
DateTime currentDateTime = startDateTime;
while (endDateTime > currentDateTime.AddMonths(1))
{
result ++;
currentDateTime = currentDateTime.AddMonths(1);
}
if (endDateTime > currentDateTime)
{
days = endDateTime.Subtract(currentDateTime).TotalDays;
}
return result + days/endDateTime.GetMonthDays;
}
My understanding of the total months difference between 2 dates has an integral and a fractional part (the date matters).
The integral part is the full months difference.
The fractional part, for me, is the difference of the % of the day (to the full days of month) between the starting and ending months.
public static class DateTimeExtensions
{
public static double TotalMonthsDifference(this DateTime from, DateTime to)
{
//Compute full months difference between dates
var fullMonthsDiff = (to.Year - from.Year)*12 + to.Month - from.Month;
//Compute difference between the % of day to full days of each month
var fractionMonthsDiff = ((double)(to.Day-1) / (DateTime.DaysInMonth(to.Year, to.Month)-1)) -
((double)(from.Day-1)/ (DateTime.DaysInMonth(from.Year, from.Month)-1));
return fullMonthsDiff + fractionMonthsDiff;
}
}
With this extension, those are the results:
2/29/2000 TotalMonthsDifference 2/28/2001 => 12
2/28/2000 TotalMonthsDifference 2/28/2001 => 12.035714285714286
01/01/2000 TotalMonthsDifference 01/16/2000 => 0.5
01/31/2000 TotalMonthsDifference 01/01/2000 => -1.0
01/31/2000 TotalMonthsDifference 02/29/2000 => 1.0
01/31/2000 TotalMonthsDifference 02/28/2000 => 0.9642857142857143
01/31/2001 TotalMonthsDifference 02/28/2001 => 1.0
Here is a simple solution that works at least for me. It's probably not the fastest though because it uses the cool DateTime's AddMonth feature in a loop:
public static int GetMonthsDiff(DateTime start, DateTime end)
{
if (start > end)
return GetMonthsDiff(end, start);
int months = 0;
do
{
start = start.AddMonths(1);
if (start > end)
return months;
months++;
}
while (true);
}
This simple static function calculates the fraction of months between two Datetimes, e.g.
1.1. to 31.1. = 1.0
1.4. to 15.4. = 0.5
16.4. to 30.4. = 0.5
1.3. to 1.4. = 1 + 1/30
The function assumes that the first date is smaller than the second date. To deal with negative time intervals one can modify the function easily by introducing a sign and a variable swap at the beginning.
public static double GetDeltaMonths(DateTime t0, DateTime t1)
{
DateTime t = t0;
double months = 0;
while(t<=t1)
{
int daysInMonth = DateTime.DaysInMonth(t.Year, t.Month);
DateTime endOfMonth = new DateTime(t.Year, t.Month, daysInMonth);
int cutDay = endOfMonth <= t1 ? daysInMonth : t1.Day;
months += (cutDay - t.Day + 1) / (double) daysInMonth;
t = new DateTime(t.Year, t.Month, 1).AddMonths(1);
}
return Math.Round(months,2);
}
one line solution
For first, check if both dates are in the current year, if not get months of whole years and then add months from the start and end year.
DateTime dateFrom = new DateTime(2019, 2, 1);
DateTime dateTo = new DateTime(2021, 5, 25);
With the first month
var monthCount = dateFrom.Year != dateTo.Year ? ((dateTo.Year - dateFrom.Year - 1) * 12) + (13 - dateFrom.Month + dateTo.Month) : dateTo.Month - dateFrom.Month + 1;
result = 28
Without first month
monthCount = dateFrom.Year != dateTo.Year ? ((dateTo.Year - dateFrom.Year - 1) * 12) + (12 - dateFrom.Month + dateTo.Month) : dateTo.Month - dateFrom.Month;
result = 27
Public Class ClassDateOperation
Private prop_DifferenceInDay As Integer
Private prop_DifferenceInMonth As Integer
Private prop_DifferenceInYear As Integer
Public Function DayMonthYearFromTwoDate(ByVal DateStart As Date, ByVal DateEnd As Date) As ClassDateOperation
Dim differenceInDay As Integer
Dim differenceInMonth As Integer
Dim differenceInYear As Integer
Dim myDate As Date
DateEnd = DateEnd.AddDays(1)
differenceInYear = DateEnd.Year - DateStart.Year
If DateStart.Month <= DateEnd.Month Then
differenceInMonth = DateEnd.Month - DateStart.Month
Else
differenceInYear -= 1
differenceInMonth = (12 - DateStart.Month) + DateEnd.Month
End If
If DateStart.Day <= DateEnd.Day Then
differenceInDay = DateEnd.Day - DateStart.Day
Else
myDate = CDate("01/" & DateStart.AddMonths(1).Month & "/" & DateStart.Year).AddDays(-1)
If differenceInMonth <> 0 Then
differenceInMonth -= 1
Else
differenceInMonth = 11
differenceInYear -= 1
End If
differenceInDay = myDate.Day - DateStart.Day + DateEnd.Day
End If
prop_DifferenceInDay = differenceInDay
prop_DifferenceInMonth = differenceInMonth
prop_DifferenceInYear = differenceInYear
Return Me
End Function
Public ReadOnly Property DifferenceInDay() As Integer
Get
Return prop_DifferenceInDay
End Get
End Property
Public ReadOnly Property DifferenceInMonth As Integer
Get
Return prop_DifferenceInMonth
End Get
End Property
Public ReadOnly Property DifferenceInYear As Integer
Get
Return prop_DifferenceInYear
End Get
End Property
End Class
This is from my own library, will return the difference of months between two dates.
public static int MonthDiff(DateTime d1, DateTime d2)
{
int retVal = 0;
// Calculate the number of years represented and multiply by 12
// Substract the month number from the total
// Substract the difference of the second month and 12 from the total
retVal = (d1.Year - d2.Year) * 12;
retVal = retVal - d1.Month;
retVal = retVal - (12 - d2.Month);
return retVal;
}
You can have a function something like this.
For Example, from 2012/12/27 to 2012/12/29 becomes 3 days. Likewise, from 2012/12/15 to 2013/01/15 becomes 2 months, because up to 2013/01/14 it's 1 month. from 15th it's 2nd month started.
You can remove the "=" in the second if condition, if you do not want to include both days in the calculation. i.e, from 2012/12/15 to 2013/01/15 is 1 month.
public int GetMonths(DateTime startDate, DateTime endDate)
{
if (startDate > endDate)
{
throw new Exception("Start Date is greater than the End Date");
}
int months = ((endDate.Year * 12) + endDate.Month) - ((startDate.Year * 12) + startDate.Month);
if (endDate.Day >= startDate.Day)
{
months++;
}
return months;
}
you can use the following extension:
Code
public static class Ext
{
#region Public Methods
public static int GetAge(this DateTime #this)
{
var today = DateTime.Today;
return ((((today.Year - #this.Year) * 100) + (today.Month - #this.Month)) * 100 + today.Day - #this.Day) / 10000;
}
public static int DiffMonths(this DateTime #from, DateTime #to)
{
return (((((#to.Year - #from.Year) * 12) + (#to.Month - #from.Month)) * 100 + #to.Day - #from.Day) / 100);
}
public static int DiffYears(this DateTime #from, DateTime #to)
{
return ((((#to.Year - #from.Year) * 100) + (#to.Month - #from.Month)) * 100 + #to.Day - #from.Day) / 10000;
}
#endregion Public Methods
}
Implementation !
int Age;
int years;
int Months;
//Replace your own date
var d1 = new DateTime(2000, 10, 22);
var d2 = new DateTime(2003, 10, 20);
//Age
Age = d1.GetAge();
Age = d2.GetAge();
//positive
years = d1.DiffYears(d2);
Months = d1.DiffMonths(d2);
//negative
years = d2.DiffYears(d1);
Months = d2.DiffMonths(d1);
//Or
Months = Ext.DiffMonths(d1, d2);
years = Ext.DiffYears(d1, d2);
Here's a much more concise solution using VB.Net DateDiff for Year, Month, Day only. You can load the DateDiff library in C# as well.
date1 must be <= date2
VB.NET
Dim date1 = Now.AddDays(-2000)
Dim date2 = Now
Dim diffYears = DateDiff(DateInterval.Year, date1, date2) - If(date1.DayOfYear > date2.DayOfYear, 1, 0)
Dim diffMonths = DateDiff(DateInterval.Month, date1, date2) - diffYears * 12 - If(date1.Day > date2.Day, 1, 0)
Dim diffDays = If(date2.Day >= date1.Day, date2.Day - date1.Day, date2.Day + (Date.DaysInMonth(date1.Year, date1.Month) - date1.Day))
C#
DateTime date1 = Now.AddDays(-2000);
DateTime date2 = Now;
int diffYears = DateDiff(DateInterval.Year, date1, date2) - date1.DayOfYear > date2.DayOfYear ? 1 : 0;
int diffMonths = DateDiff(DateInterval.Month, date1, date2) - diffYears * 12 - date1.Day > date2.Day ? 1 : 0;
int diffDays = date2.Day >= date1.Day ? date2.Day - date1.Day : date2.Day + (System.DateTime.DaysInMonth(date1.Year, date1.Month) - date1.Day);
This is in response to Kirk Woll's answer. I don't have enough reputation points to reply to a comment yet...
I liked Kirk's solution and was going to shamelessly rip it off and use it in my code, but when I looked through it I realized it's way too complicated. Unnecessary switching and looping, and a public constructor that is pointless to use.
Here's my rewrite:
public class DateTimeSpan {
private DateTime _date1;
private DateTime _date2;
private int _years;
private int _months;
private int _days;
private int _hours;
private int _minutes;
private int _seconds;
private int _milliseconds;
public int Years { get { return _years; } }
public int Months { get { return _months; } }
public int Days { get { return _days; } }
public int Hours { get { return _hours; } }
public int Minutes { get { return _minutes; } }
public int Seconds { get { return _seconds; } }
public int Milliseconds { get { return _milliseconds; } }
public DateTimeSpan(DateTime date1, DateTime date2) {
_date1 = (date1 > date2) ? date1 : date2;
_date2 = (date2 < date1) ? date2 : date1;
_years = _date1.Year - _date2.Year;
_months = (_years * 12) + _date1.Month - _date2.Month;
TimeSpan t = (_date2 - _date1);
_days = t.Days;
_hours = t.Hours;
_minutes = t.Minutes;
_seconds = t.Seconds;
_milliseconds = t.Milliseconds;
}
public static DateTimeSpan CompareDates(DateTime date1, DateTime date2) {
return new DateTimeSpan(date1, date2);
}
}
Usage1, pretty much the same:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
var dateSpan = new DateTimeSpan(compareTo, now);
Console.WriteLine("Years: " + dateSpan.Years);
Console.WriteLine("Months: " + dateSpan.Months);
Console.WriteLine("Days: " + dateSpan.Days);
Console.WriteLine("Hours: " + dateSpan.Hours);
Console.WriteLine("Minutes: " + dateSpan.Minutes);
Console.WriteLine("Seconds: " + dateSpan.Seconds);
Console.WriteLine("Milliseconds: " + dateSpan.Milliseconds);
}
Usage2, similar:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
Console.WriteLine("Years: " + DateTimeSpan.CompareDates(compareTo, now).Years);
Console.WriteLine("Months: " + DateTimeSpan.CompareDates(compareTo, now).Months);
Console.WriteLine("Days: " + DateTimeSpan.CompareDates(compareTo, now).Days);
Console.WriteLine("Hours: " + DateTimeSpan.CompareDates(compareTo, now).Hours);
Console.WriteLine("Minutes: " + DateTimeSpan.CompareDates(compareTo, now).Minutes);
Console.WriteLine("Seconds: " + DateTimeSpan.CompareDates(compareTo, now).Seconds);
Console.WriteLine("Milliseconds: " + DateTimeSpan.CompareDates(compareTo, now).Milliseconds);
}
In my case it is required to calculate the complete month from the start date to the day prior to this day in the next month or from start to end of month.
Ex: from 1/1/2018 to 31/1/2018 is a complete month
Ex2: from 5/1/2018 to 4/2/2018 is a complete month
so based on this here is my solution:
public static DateTime GetMonthEnd(DateTime StartDate, int MonthsCount = 1)
{
return StartDate.AddMonths(MonthsCount).AddDays(-1);
}
public static Tuple<int, int> CalcPeriod(DateTime StartDate, DateTime EndDate)
{
int MonthsCount = 0;
Tuple<int, int> Period;
while (true)
{
if (GetMonthEnd(StartDate) > EndDate)
break;
else
{
MonthsCount += 1;
StartDate = StartDate.AddMonths(1);
}
}
int RemainingDays = (EndDate - StartDate).Days + 1;
Period = new Tuple<int, int>(MonthsCount, RemainingDays);
return Period;
}
Usage:
Tuple<int, int> Period = CalcPeriod(FromDate, ToDate);
Note: in my case it was required to calculate the remaining days after the complete months so if it's not your case you could ignore the days result or even you could change the method return from tuple to integer.
public static int PayableMonthsInDuration(DateTime StartDate, DateTime EndDate)
{
int sy = StartDate.Year; int sm = StartDate.Month; int count = 0;
do
{
count++;if ((sy == EndDate.Year) && (sm >= EndDate.Month)) { break; }
sm++;if (sm == 13) { sm = 1; sy++; }
} while ((EndDate.Year >= sy) || (EndDate.Month >= sm));
return (count);
}
This solution is for Rental/subscription calculation, where difference doesn't means to be subtraction, it's meant to be the span in within those two dates.
I wrote a function to accomplish this, because the others ways weren't working for me.
public string getEndDate (DateTime startDate,decimal monthCount)
{
int y = startDate.Year;
int m = startDate.Month;
for (decimal i = monthCount; i > 1; i--)
{
m++;
if (m == 12)
{ y++;
m = 1;
}
}
return string.Format("{0}-{1}-{2}", y.ToString(), m.ToString(), startDate.Day.ToString());
}
There are not a lot of clear answers on this because you are always assuming things.
This solution calculates between two dates the months between assuming you want to save the day of month for comparison, (meaning that the day of the month is considered in the calculation)
Example, if you have a date of 30 Jan 2012, 29 Feb 2012 will not be a month but 01 March 2013 will.
It's been tested pretty thoroughly, probably will clean it up later as we use it, but here:
private static int TotalMonthDifference(DateTime dtThis, DateTime dtOther)
{
int intReturn = 0;
bool sameMonth = false;
if (dtOther.Date < dtThis.Date) //used for an error catch in program, returns -1
intReturn--;
int dayOfMonth = dtThis.Day; //captures the month of day for when it adds a month and doesn't have that many days
int daysinMonth = 0; //used to caputre how many days are in the month
while (dtOther.Date > dtThis.Date) //while Other date is still under the other
{
dtThis = dtThis.AddMonths(1); //as we loop, we just keep adding a month for testing
daysinMonth = DateTime.DaysInMonth(dtThis.Year, dtThis.Month); //grabs the days in the current tested month
if (dtThis.Day != dayOfMonth) //Example 30 Jan 2013 will go to 28 Feb when a month is added, so when it goes to march it will be 28th and not 30th
{
if (daysinMonth < dayOfMonth) // uses day in month max if can't set back to day of month
dtThis.AddDays(daysinMonth - dtThis.Day);
else
dtThis.AddDays(dayOfMonth - dtThis.Day);
}
if (((dtOther.Year == dtThis.Year) && (dtOther.Month == dtThis.Month))) //If the loop puts it in the same month and year
{
if (dtOther.Day >= dayOfMonth) //check to see if it is the same day or later to add one to month
intReturn++;
sameMonth = true; //sets this to cancel out of the normal counting of month
}
if ((!sameMonth)&&(dtOther.Date > dtThis.Date))//so as long as it didn't reach the same month (or if i started in the same month, one month ahead, add a month)
intReturn++;
}
return intReturn; //return month
}
Based on the excellent DateTimeSpan work done above, I've normalized the code a bit; this seems to work pretty well:
public class DateTimeSpan
{
private DateTimeSpan() { }
private DateTimeSpan(int years, int months, int days, int hours, int minutes, int seconds, int milliseconds)
{
Years = years;
Months = months;
Days = days;
Hours = hours;
Minutes = minutes;
Seconds = seconds;
Milliseconds = milliseconds;
}
public int Years { get; private set; } = 0;
public int Months { get; private set; } = 0;
public int Days { get; private set; } = 0;
public int Hours { get; private set; } = 0;
public int Minutes { get; private set; } = 0;
public int Seconds { get; private set; } = 0;
public int Milliseconds { get; private set; } = 0;
public static DateTimeSpan CompareDates(DateTime StartDate, DateTime EndDate)
{
if (StartDate.Equals(EndDate)) return new DateTimeSpan();
DateTimeSpan R = new DateTimeSpan();
bool Later;
if (Later = StartDate > EndDate)
{
DateTime D = StartDate;
StartDate = EndDate;
EndDate = D;
}
// Calculate Date Stuff
for (DateTime D = StartDate.AddYears(1); D < EndDate; D = D.AddYears(1), R.Years++) ;
if (R.Years > 0) StartDate = StartDate.AddYears(R.Years);
for (DateTime D = StartDate.AddMonths(1); D < EndDate; D = D.AddMonths(1), R.Months++) ;
if (R.Months > 0) StartDate = StartDate.AddMonths(R.Months);
for (DateTime D = StartDate.AddDays(1); D < EndDate; D = D.AddDays(1), R.Days++) ;
if (R.Days > 0) StartDate = StartDate.AddDays(R.Days);
// Calculate Time Stuff
TimeSpan T1 = EndDate - StartDate;
R.Hours = T1.Hours;
R.Minutes = T1.Minutes;
R.Seconds = T1.Seconds;
R.Milliseconds = T1.Milliseconds;
// Return answer. Negate values if the Start Date was later than the End Date
if (Later)
return new DateTimeSpan(-R.Years, -R.Months, -R.Days, -R.Hours, -R.Minutes, -R.Seconds, -R.Milliseconds);
return R;
}
}
Insane method that counts all days, so super precise
helper class :
public class DaysInMonth
{
public int Days { get; set; }
public int Month { get; set; }
public int Year { get; set; }
public bool Full { get; set; }
}
function:
public static List<DaysInMonth> MonthsDelta(DateTime start, DateTime end)
{
var dates = Enumerable.Range(0, 1 + end.Subtract(start).Days)
.Select(offset => start.AddDays(offset))
.ToArray();
DateTime? prev = null;
int days = 0;
List < DaysInMonth > list = new List<DaysInMonth>();
foreach (DateTime date in dates)
{
if (prev != null)
{
if(date.Month!=prev.GetValueOrDefault().Month)
{
DaysInMonth daysInMonth = new DaysInMonth();
daysInMonth.Days = days;
daysInMonth.Month = prev.GetValueOrDefault().Month;
daysInMonth.Year = prev.GetValueOrDefault().Year;
daysInMonth.Full = DateTime.DaysInMonth(daysInMonth.Year, daysInMonth.Month) == daysInMonth.Days;
list.Add(daysInMonth);
days = 0;
}
}
days++;
prev = date;
}
//------------------ add last
if (days > 0)
{
DaysInMonth daysInMonth = new DaysInMonth();
daysInMonth.Days = days;
daysInMonth.Month = prev.GetValueOrDefault().Month;
daysInMonth.Year = prev.GetValueOrDefault().Year;
daysInMonth.Full = DateTime.DaysInMonth(daysInMonth.Year, daysInMonth.Month) == daysInMonth.Days;
list.Add(daysInMonth);
}
return list;
}
I want to count occurrences, for each day of the week, between two given dates.
For example:
Between 20/07/2014 to 27/7/2014, an 8 day span, there were:
Sunday=2, monday=1, tuesday=1,...
Try this:
DateTime start = new DateTime(2014,07,20);
DateTime end = new DateTime(2014,07,27);
TimeSpan ts = end - start;
int limit = ts.Days;
var result = Enumerable.Range(0,limit+1)
.Select(x => start.AddDays(x))
.GroupBy(x => x.DayOfWeek)
.Select(x => new {day = x.Key, count = x.Count()});
We create a range of dates from start to end, inclusive of both dates, and then group by the day of week to get the days and corresponding counts.
Demo
You better convert the days first to DateTime instances:
DateTime d1 = new DateTime(2014,07,20);
DateTime d2 = new DateTime(2014,07,27);
Next you calculate the total days between the two dates:
int days = (int) Math.Floor((d2-d1).TotalDays)+1;
As well as the day of the week of the first date:
int dow = (int) d1.DayOfWeek;
Now we devide the number of days by seven and assign that number to all days: since this is the minimum occurences for each day:
int d7 = days/7;
int[] counts = new int[7];
for(int i = 0; i < 7; i++) {
counts[i] = d7;
}
The remainder of the days are distributed with the day of the week of d1 first:
int remainder = days-7*d7;
int dowi = dow;
while(remainder > 0) {
counts[dowi]++;
dowi = (dowi+1)%7;//next day of the week
remainder--;
}
Then we can return the arrray:
return counts;
Full method:
public static int[] countDelta (DateTime d1, DateTime d2) {
int days = (int) Math.Floor((d2-d1).TotalDays)+1;
int dow = (int) d1.DayOfWeek;
int d7 = days/7;
int[] counts = new int[7];
for(int i = 0; i < 7; i++) {
counts[i] = d7;
}
int remainder = days-7*d7;
int dowi = dow;
while(remainder > 0) {
counts[dowi]++;
dowi = (dowi+1)%7;//next day of the week
remainder--;
}
return counts;
}
The result of a csharp interactive session:
csharp> Foo.countDelta(new DateTime(2014,07,20),new DateTime(2014,07,27));
{ 2, 1, 1, 1, 1, 1, 1 }
The method runs in constant time (if the dates differ much, this will not have an impact on performance). The only constraint is that calendar must be modern: if somewhere in history, people skipped a few "days of the week", this could result in some problems.
You can try something like this. It may be not the best solution, but it's the first that came in mind:
var startDate = DateTime.Now;
var endDate = startDate.AddDays(15);
var rusultDictionary = new Dictionary<DayOfWeek, int>();
while (!startDate.Date.Equals(endDate.Date))
{
rusultDictionary[startDate.DayOfWeek] = rusultDictionary.ContainsKey(startDate.DayOfWeek) ? rusultDictionary[startDate.DayOfWeek] + 1 : 1;
startDate = startDate.AddDays(1);
}
the simple way is for loop each day in the period, and use switch case or if else to check the current date.DayOfWeek to count and save the week number, something like the following:
int mondays = 0;
switch(current.DayOfWeek){
case DayOfWeek.Monday:
mondays++;
break;
...
}
public static Dictionary<DayOfWeek, int> CountDayOfWeeks(DateTime #from, DateTime to)
{
var start = #from.Date;
var ret = Enum.GetValues(typeof(DayOfWeek)).Cast<DayOfWeek>().ToDictionary(x => x, x => 0);
while (start <= to)
{
ret[start.DayOfWeek]++;
start = start.AddDays(1);
}
return ret;
}
you can achieve it using Linq:
DateTime StartDate = DateTime.Now.AddDays(-14);
DateTime EndDate = DateTime.Now;
DayOfWeek day = DayOfWeek.Monday;
First get the all days between two dates:
List<DateTime> dates = Enumerable.Range(0, (int)((EndDate - StartDate).TotalDays) + 1)
.Select(n => StartDate.AddDays(n))
.ToList();
Now get Count on the base of day, currently it will get Count of Monday:
var MondayCount = dates.Count(x => x.DayOfWeek == day);
FIDDLE:
https://dotnetfiddle.net/ZopkFY
i need a function that calculates if there is an upcoming anniversary for a person given a start date in the past and today's current date. I found this code below but looking at the below code and I have the feeling that there is a much simpler way to calculate this without required this for loop:
private const int ANNIVERSARY_ALERT = 10;
public virtual string UpcomingMilestone
{
get
{
var years = Years() + 2;
for (int year = 0; year < years; year++)
{
int days = year * 365;
int dayDiff = days - NumberOfDays;
if (dayDiff == 0)
{
return year + " year milestone";
}
if (dayDiff < ANNIVERSARY_ALERT && dayDiff > 0)
{
return year + " year milestone in " + dayDiff + " days";
}
}
return string.Empty;
}
}
public virtual int NumberOfDays
{
get
{
TimeSpan ts = DateTime.Today - StartDate.Value;
return (int)ts.TotalDays;
}
}
public virtual int Years()
{
TimeSpan span = DateTime.Now.Subtract(StartDate.Value);
return (int)(span.Days / 365.25); // leap years included
}
Can anyone suggest a way to calculate this above without having to do this loop? This is more for code maintainability versus any performance considerations.
Use the relevant parts of the startdate to compose a new DateTime:
//My birthday, feel free to put this date in your calendars!
var startDate = new DateTime(1976, 2, 29);
//Get the anniversary date for this year
DateTime nextAnniversary;
try
{
nextAnniversary = new DateTime(DateTime.Today.Year, startDate.Month, startDate.Day);
}
catch(ArgumentOutOfRangeException)
{
//DateTime conversion failed, try next day in the year
nextAnniversary = new DateTime(DateTime.Today.Year, startDate.AddDays(1).Month, startDate.AddDays(1).Day);
}
//Check if this year's anniversary has already happened
if(nextAnniversary < DateTime.Today) nextAnniversary = nextAnniversary.AddYears(1);
This should do it. You need to provide TimeSpan range that can be a day or a week, and date which you are matching anniversary to.
public bool Upcomming(DateTime date, TimeSpan range){
var newdate = new Date(DateTime.Now.Year, date.Month, date.Day);
return newdate - DateTime.Now < range;
}
int anniversaryYear = DateTime.Now.Year - StartDate.Year + 1;
DateTime nextAnniversary = StartDate.AddYears(anniversaryYear);
if (nextAnniversary == DateTime.Now)
{
return anniverasryYear + " year milestone";
}
if (DateTime.Now > nextAnniverasry)
{
anniverasryYear++;
nextAnniversary = StartDate.AddYears(anniversaryYear);
}
var daysTillNext = Math.Abs( (nextAnniversary - DateTime.Now).TotalDays );
return string.Format("{0} milestone in {1}", anniversaryYear, daysTillNext);
These methods should be sufficient for your purposes.
public DateTime GetNextAnniversaryDate(DateTime anniversary)
{
var today = DateTime.Today;
var year = anniversary.Month < today.Month ||
(anniversary.Month == today.Month && anniversary.Day < today.Day)
? today.Year + 1 : today.Year;
return anniversary.Month == 2 && anniversary.Day == 29 &&
!DateTime.IsLeapYear(year)
? new DateTime(year, 2, 28)
: new DateTime(year, anniversary.Month, anniversary.Day);
}
public int GetDaysUntilNextAnniversary(DateTime anniversary)
{
var nextDate = GetNextAnniversaryDate(anniversary);
return (int)(nextDate - DateTime.Today).TotalDays;
}
Note that we are specifically electing to celebrate leap-day anniversaries on Feb 28th when the anniversary year is not a leap year. You could change that to March 1 if desired.
Also note that this question assumes that the day of the person in question is the same day as the computer's local clock. This might not be true, for example if the local machine is in a time zone that is ahead of the user's time zone, then it might be one day off. If you want to take that into consideration, then you could use TimeZoneInfo and DateTime.UtcNow. Or you could use Noda Time. More about this on my blog.
I have two text-boxes which are used to select a From and a To date. I need to have a loop where the outer loop will be for a year and the inner loop will run for each month.
Problem is with the code below, if I choose 11/01/2011 and 06/30/2012, my month loop runs once for month 11. After that the loop exits.. Any help is appreciated.
I'm using the code below to look into a SharePoint Calendar List (using CAML query) and fetch number of times 3, 5 consecutive days a certain room is available excluding week ends. Idea is to use CAML query to get the number of free days for each month and keep repeating till the last selected month.
int year = 0, month = 0;
for (year = Calendar1.SelectedDate.Year; year <= Calendar2.SelectedDate.Year; year++)
{
int i = year;
for (month = Calendar1.SelectedDate.Month; month <= Calendar2.SelectedDate.Month; month++)
{
int j = month;
}
}
Would something like this work?
for (DateTime date = Calendar1.SelectedDate; date < Calendar2.SelectedDate; date = date.AddMonths(1))
{
//code
}
If I understand you correctly you want to iterate through each month between the 2 dates. If so, this should work:
var dt2 = Calendar2.SelectedDate.Year;
var current = Calendar1.SelectedDate;
while (current < dt2)
{
current = current.AddMonths(1);
//do your work for each month here
}
Your starting and ending number for your inner loop should be conditional.
If you're on the start year then the start month should be the selected month; otherwise it should be 1.
If you're on the end year then the end month should be the selected month; otherwise it should be 12.
Example:
var startYear = Calendar1.SelectedDate.Year;
var endYear = Calender2.SelectedDate.Year;
var startMonth = Calender1.SelectedDate.Month;
var endMonth = Calender2.SelectedDate.Month;
for (var year = startYear; year <= endYear; year++)
{
var sm = year == startYear ? startMonth : 1;
var em = year == endYear ? endMonth : 12;
for (var month = sm; month <= em; month++)
{
}
}
For the start year, you need to start your inner loop from the appropriate month, and run through all 12 months, except on the end year, where you should run to the appropriate month. Something like this should work:
int year = 0, month = 0;
for (year = Calendar1.SelectedDate.Year; year <= Calendar2.SelectedDate.Year; year++)
{
int i = year;
for (month = (i==Calendar1.SelectedDate.Year ? Calendar1.SelectedDate.Month : 1); month <= (i==Calendar2.SelectedDate.Year ? Calendar2.SelectedDate.Month : 12); month++)
{
int j = month;
}
}
//Function return First day in Month For Date --example : 01-09-2012
public static DateTime FirstDayOfMonthFromDateTime(DateTime dateTime)
{
return new DateTime(dateTime.Year, dateTime.Month, 1);
}
//code used to loop throw a Date range for each month
DateTime FirstDayInMonth = FirstDayOfMonthFromDateTime(Date);
DateTime TempDay = FirstDayInMonth;
int days = DateTime.DaysInMonth(FirstDayInMonth.Year, FirstDayInMonth.Month);
for (int i = 0; i < days; i++)
{
System.Out.Println(TempDay.toString());
TempDay.AddDays(1);
}
//then used code for each month in year (simple loop from 1-12)..
private static void Main(string[] args)
{
Console.WriteLine(DateTime.DaysInMonth(2020, 1));
var start = new DateTime(1900, 1, 1);
var end = new DateTime(2000, 12, 31);
end = new DateTime(end.Year, end.Month, DateTime.DaysInMonth(end.Year, end.Month));
var diff = Enumerable.Range(0, Int32.MaxValue)
.Select(e => start.AddMonths(e))
.TakeWhile(e => e <= end)
.Select(e => e);
foreach (var item in diff)
{
Console.WriteLine("Start Date - " + item.ToString("dd-MM-yyyy"));
Console.WriteLine("End Date - " + item.AddDays(DateTime.DaysInMonth(item.Year, item.Month) - 1).ToString("dd-MM-yyyy"));
}
}
How to calculate the difference in months between two dates in C#?
Is there is equivalent of VB's DateDiff() method in C#. I need to find difference in months between two dates that are years apart. The documentation says that I can use TimeSpan like:
TimeSpan ts = date1 - date2;
but this gives me data in Days. I don't want to divide this number by 30 because not every month is 30 days and since the two operand values are quite apart from each other, I am afraid dividing by 30 might give me a wrong value.
Any suggestions?
Assuming the day of the month is irrelevant (i.e. the diff between 2011.1.1 and 2010.12.31 is 1), with date1 > date2 giving a positive value and date2 > date1 a negative value
((date1.Year - date2.Year) * 12) + date1.Month - date2.Month
Or, assuming you want an approximate number of 'average months' between the two dates, the following should work for all but very huge date differences.
date1.Subtract(date2).Days / (365.25 / 12)
Note, if you were to use the latter solution then your unit tests should state the widest date range which your application is designed to work with and validate the results of the calculation accordingly.
Update (with thanks to Gary)
If using the 'average months' method, a slightly more accurate number to use for the 'average number of days per year' is 365.2425.
Here is a comprehensive solution to return a DateTimeSpan, similar to a TimeSpan, except that it includes all the date components in addition to the time components.
Usage:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
var dateSpan = DateTimeSpan.CompareDates(compareTo, now);
Console.WriteLine("Years: " + dateSpan.Years);
Console.WriteLine("Months: " + dateSpan.Months);
Console.WriteLine("Days: " + dateSpan.Days);
Console.WriteLine("Hours: " + dateSpan.Hours);
Console.WriteLine("Minutes: " + dateSpan.Minutes);
Console.WriteLine("Seconds: " + dateSpan.Seconds);
Console.WriteLine("Milliseconds: " + dateSpan.Milliseconds);
}
Outputs:
Years: 1
Months: 5
Days: 27
Hours: 1
Minutes: 36
Seconds: 50
Milliseconds: 0
For convenience, I've lumped the logic into the DateTimeSpan struct, but you may move the method CompareDates wherever you see fit. Also note, it doesn't matter which date comes before the other.
public struct DateTimeSpan
{
public int Years { get; }
public int Months { get; }
public int Days { get; }
public int Hours { get; }
public int Minutes { get; }
public int Seconds { get; }
public int Milliseconds { get; }
public DateTimeSpan(int years, int months, int days, int hours, int minutes, int seconds, int milliseconds)
{
Years = years;
Months = months;
Days = days;
Hours = hours;
Minutes = minutes;
Seconds = seconds;
Milliseconds = milliseconds;
}
enum Phase { Years, Months, Days, Done }
public static DateTimeSpan CompareDates(DateTime date1, DateTime date2)
{
if (date2 < date1)
{
var sub = date1;
date1 = date2;
date2 = sub;
}
DateTime current = date1;
int years = 0;
int months = 0;
int days = 0;
Phase phase = Phase.Years;
DateTimeSpan span = new DateTimeSpan();
int officialDay = current.Day;
while (phase != Phase.Done)
{
switch (phase)
{
case Phase.Years:
if (current.AddYears(years + 1) > date2)
{
phase = Phase.Months;
current = current.AddYears(years);
}
else
{
years++;
}
break;
case Phase.Months:
if (current.AddMonths(months + 1) > date2)
{
phase = Phase.Days;
current = current.AddMonths(months);
if (current.Day < officialDay && officialDay <= DateTime.DaysInMonth(current.Year, current.Month))
current = current.AddDays(officialDay - current.Day);
}
else
{
months++;
}
break;
case Phase.Days:
if (current.AddDays(days + 1) > date2)
{
current = current.AddDays(days);
var timespan = date2 - current;
span = new DateTimeSpan(years, months, days, timespan.Hours, timespan.Minutes, timespan.Seconds, timespan.Milliseconds);
phase = Phase.Done;
}
else
{
days++;
}
break;
}
}
return span;
}
}
You could do
if ( date1.AddMonths(x) > date2 )
If you want the exact number of full months, always positive (2000-01-15, 2000-02-14 returns 0), considering a full month is when you reach the same day the next month (something like the age calculation)
public static int GetMonthsBetween(DateTime from, DateTime to)
{
if (from > to) return GetMonthsBetween(to, from);
var monthDiff = Math.Abs((to.Year * 12 + (to.Month - 1)) - (from.Year * 12 + (from.Month - 1)));
if (from.AddMonths(monthDiff) > to || to.Day < from.Day)
{
return monthDiff - 1;
}
else
{
return monthDiff;
}
}
Edit reason: the old code was not correct in some cases like :
new { From = new DateTime(1900, 8, 31), To = new DateTime(1901, 8, 30), Result = 11 },
Test cases I used to test the function:
var tests = new[]
{
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 1, 1), Result = 0 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 1, 2), Result = 0 },
new { From = new DateTime(1900, 1, 2), To = new DateTime(1900, 1, 1), Result = 0 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1900, 2, 1), Result = 1 },
new { From = new DateTime(1900, 2, 1), To = new DateTime(1900, 1, 1), Result = 1 },
new { From = new DateTime(1900, 1, 31), To = new DateTime(1900, 2, 1), Result = 0 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1900, 9, 30), Result = 0 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1900, 10, 1), Result = 1 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1901, 1, 1), Result = 12 },
new { From = new DateTime(1900, 1, 1), To = new DateTime(1911, 1, 1), Result = 132 },
new { From = new DateTime(1900, 8, 31), To = new DateTime(1901, 8, 30), Result = 11 },
};
I checked the usage of this method in VB.NET via MSDN and it seems that it has a lot of usages. There is no such a built-in method in C#. (Even it's not a good idea) you can call VB's in C#.
Add Microsoft.VisualBasic.dll to
your project as a reference
use
Microsoft.VisualBasic.DateAndTime.DateDiff
in your code
Use Noda Time:
LocalDate start = new LocalDate(2013, 1, 5);
LocalDate end = new LocalDate(2014, 6, 1);
Period period = Period.Between(start, end, PeriodUnits.Months);
Console.WriteLine(period.Months); // 16
(example source)
To get difference in months (both start and end inclusive), irrespective of dates:
DateTime start = new DateTime(2013, 1, 1);
DateTime end = new DateTime(2014, 2, 1);
var diffMonths = (end.Month + end.Year * 12) - (start.Month + start.Year * 12);
I just needed something simple to cater for e.g. employment dates where only the month/year is entered, so wanted distinct years and months worked in. This is what I use, here for usefullness only
public static YearsMonths YearMonthDiff(DateTime startDate, DateTime endDate) {
int monthDiff = ((endDate.Year * 12) + endDate.Month) - ((startDate.Year * 12) + startDate.Month) + 1;
int years = (int)Math.Floor((decimal) (monthDiff / 12));
int months = monthDiff % 12;
return new YearsMonths {
TotalMonths = monthDiff,
Years = years,
Months = months
};
}
.NET Fiddle
You can use Noda Time https://nodatime.org/
LocalDate start = new LocalDate(2010, 1, 5);
LocalDate end = new LocalDate(2012, 6, 1);
Period period = Period.Between(start, end, PeriodUnits.Months);
Console.WriteLine(period.Months);
You can use the DateDiff class of the Time Period Library for .NET:
// ----------------------------------------------------------------------
public void DateDiffSample()
{
DateTime date1 = new DateTime( 2009, 11, 8, 7, 13, 59 );
DateTime date2 = new DateTime( 2011, 3, 20, 19, 55, 28 );
DateDiff dateDiff = new DateDiff( date1, date2 );
// differences
Console.WriteLine( "DateDiff.Months: {0}", dateDiff.Months );
// > DateDiff.Months: 16
// elapsed
Console.WriteLine( "DateDiff.ElapsedMonths: {0}", dateDiff.ElapsedMonths );
// > DateDiff.ElapsedMonths: 4
// description
Console.WriteLine( "DateDiff.GetDescription(6): {0}", dateDiff.GetDescription( 6 ) );
// > DateDiff.GetDescription(6): 1 Year 4 Months 12 Days 12 Hours 41 Mins 29 Secs
} // DateDiffSample
Here is my contribution to get difference in Months that I've found to be accurate:
namespace System
{
public static class DateTimeExtensions
{
public static Int32 DiffMonths( this DateTime start, DateTime end )
{
Int32 months = 0;
DateTime tmp = start;
while ( tmp < end )
{
months++;
tmp = tmp.AddMonths( 1 );
}
return months;
}
}
}
Usage:
Int32 months = DateTime.Now.DiffMonths( DateTime.Now.AddYears( 5 ) );
You can create another method called DiffYears and apply exactly the same logic as above and AddYears instead of AddMonths in the while loop.
This worked for what I needed it for. The day of month didn't matter in my case because it always happens to be the last day of the month.
public static int MonthDiff(DateTime d1, DateTime d2){
int retVal = 0;
if (d1.Month<d2.Month)
{
retVal = (d1.Month + 12) - d2.Month;
retVal += ((d1.Year - 1) - d2.Year)*12;
}
else
{
retVal = d1.Month - d2.Month;
retVal += (d1.Year - d2.Year)*12;
}
//// Calculate the number of years represented and multiply by 12
//// Substract the month number from the total
//// Substract the difference of the second month and 12 from the total
//retVal = (d1.Year - d2.Year) * 12;
//retVal = retVal - d1.Month;
//retVal = retVal - (12 - d2.Month);
return retVal;
}
There's 3 cases: same year, previous year and other years.
If the day of the month does not matter...
public int GetTotalNumberOfMonths(DateTime start, DateTime end)
{
// work with dates in the right order
if (start > end)
{
var swapper = start;
start = end;
end = swapper;
}
switch (end.Year - start.Year)
{
case 0: // Same year
return end.Month - start.Month;
case 1: // last year
return (12 - start.Month) + end.Month;
default:
return 12 * (3 - (end.Year - start.Year)) + (12 - start.Month) + end.Month;
}
}
The most precise way is this that return difference in months by fraction :
private double ReturnDiffereceBetweenTwoDatesInMonths(DateTime startDateTime, DateTime endDateTime)
{
double result = 0;
double days = 0;
DateTime currentDateTime = startDateTime;
while (endDateTime > currentDateTime.AddMonths(1))
{
result ++;
currentDateTime = currentDateTime.AddMonths(1);
}
if (endDateTime > currentDateTime)
{
days = endDateTime.Subtract(currentDateTime).TotalDays;
}
return result + days/endDateTime.GetMonthDays;
}
My understanding of the total months difference between 2 dates has an integral and a fractional part (the date matters).
The integral part is the full months difference.
The fractional part, for me, is the difference of the % of the day (to the full days of month) between the starting and ending months.
public static class DateTimeExtensions
{
public static double TotalMonthsDifference(this DateTime from, DateTime to)
{
//Compute full months difference between dates
var fullMonthsDiff = (to.Year - from.Year)*12 + to.Month - from.Month;
//Compute difference between the % of day to full days of each month
var fractionMonthsDiff = ((double)(to.Day-1) / (DateTime.DaysInMonth(to.Year, to.Month)-1)) -
((double)(from.Day-1)/ (DateTime.DaysInMonth(from.Year, from.Month)-1));
return fullMonthsDiff + fractionMonthsDiff;
}
}
With this extension, those are the results:
2/29/2000 TotalMonthsDifference 2/28/2001 => 12
2/28/2000 TotalMonthsDifference 2/28/2001 => 12.035714285714286
01/01/2000 TotalMonthsDifference 01/16/2000 => 0.5
01/31/2000 TotalMonthsDifference 01/01/2000 => -1.0
01/31/2000 TotalMonthsDifference 02/29/2000 => 1.0
01/31/2000 TotalMonthsDifference 02/28/2000 => 0.9642857142857143
01/31/2001 TotalMonthsDifference 02/28/2001 => 1.0
Here is a simple solution that works at least for me. It's probably not the fastest though because it uses the cool DateTime's AddMonth feature in a loop:
public static int GetMonthsDiff(DateTime start, DateTime end)
{
if (start > end)
return GetMonthsDiff(end, start);
int months = 0;
do
{
start = start.AddMonths(1);
if (start > end)
return months;
months++;
}
while (true);
}
This simple static function calculates the fraction of months between two Datetimes, e.g.
1.1. to 31.1. = 1.0
1.4. to 15.4. = 0.5
16.4. to 30.4. = 0.5
1.3. to 1.4. = 1 + 1/30
The function assumes that the first date is smaller than the second date. To deal with negative time intervals one can modify the function easily by introducing a sign and a variable swap at the beginning.
public static double GetDeltaMonths(DateTime t0, DateTime t1)
{
DateTime t = t0;
double months = 0;
while(t<=t1)
{
int daysInMonth = DateTime.DaysInMonth(t.Year, t.Month);
DateTime endOfMonth = new DateTime(t.Year, t.Month, daysInMonth);
int cutDay = endOfMonth <= t1 ? daysInMonth : t1.Day;
months += (cutDay - t.Day + 1) / (double) daysInMonth;
t = new DateTime(t.Year, t.Month, 1).AddMonths(1);
}
return Math.Round(months,2);
}
one line solution
For first, check if both dates are in the current year, if not get months of whole years and then add months from the start and end year.
DateTime dateFrom = new DateTime(2019, 2, 1);
DateTime dateTo = new DateTime(2021, 5, 25);
With the first month
var monthCount = dateFrom.Year != dateTo.Year ? ((dateTo.Year - dateFrom.Year - 1) * 12) + (13 - dateFrom.Month + dateTo.Month) : dateTo.Month - dateFrom.Month + 1;
result = 28
Without first month
monthCount = dateFrom.Year != dateTo.Year ? ((dateTo.Year - dateFrom.Year - 1) * 12) + (12 - dateFrom.Month + dateTo.Month) : dateTo.Month - dateFrom.Month;
result = 27
Public Class ClassDateOperation
Private prop_DifferenceInDay As Integer
Private prop_DifferenceInMonth As Integer
Private prop_DifferenceInYear As Integer
Public Function DayMonthYearFromTwoDate(ByVal DateStart As Date, ByVal DateEnd As Date) As ClassDateOperation
Dim differenceInDay As Integer
Dim differenceInMonth As Integer
Dim differenceInYear As Integer
Dim myDate As Date
DateEnd = DateEnd.AddDays(1)
differenceInYear = DateEnd.Year - DateStart.Year
If DateStart.Month <= DateEnd.Month Then
differenceInMonth = DateEnd.Month - DateStart.Month
Else
differenceInYear -= 1
differenceInMonth = (12 - DateStart.Month) + DateEnd.Month
End If
If DateStart.Day <= DateEnd.Day Then
differenceInDay = DateEnd.Day - DateStart.Day
Else
myDate = CDate("01/" & DateStart.AddMonths(1).Month & "/" & DateStart.Year).AddDays(-1)
If differenceInMonth <> 0 Then
differenceInMonth -= 1
Else
differenceInMonth = 11
differenceInYear -= 1
End If
differenceInDay = myDate.Day - DateStart.Day + DateEnd.Day
End If
prop_DifferenceInDay = differenceInDay
prop_DifferenceInMonth = differenceInMonth
prop_DifferenceInYear = differenceInYear
Return Me
End Function
Public ReadOnly Property DifferenceInDay() As Integer
Get
Return prop_DifferenceInDay
End Get
End Property
Public ReadOnly Property DifferenceInMonth As Integer
Get
Return prop_DifferenceInMonth
End Get
End Property
Public ReadOnly Property DifferenceInYear As Integer
Get
Return prop_DifferenceInYear
End Get
End Property
End Class
This is from my own library, will return the difference of months between two dates.
public static int MonthDiff(DateTime d1, DateTime d2)
{
int retVal = 0;
// Calculate the number of years represented and multiply by 12
// Substract the month number from the total
// Substract the difference of the second month and 12 from the total
retVal = (d1.Year - d2.Year) * 12;
retVal = retVal - d1.Month;
retVal = retVal - (12 - d2.Month);
return retVal;
}
You can have a function something like this.
For Example, from 2012/12/27 to 2012/12/29 becomes 3 days. Likewise, from 2012/12/15 to 2013/01/15 becomes 2 months, because up to 2013/01/14 it's 1 month. from 15th it's 2nd month started.
You can remove the "=" in the second if condition, if you do not want to include both days in the calculation. i.e, from 2012/12/15 to 2013/01/15 is 1 month.
public int GetMonths(DateTime startDate, DateTime endDate)
{
if (startDate > endDate)
{
throw new Exception("Start Date is greater than the End Date");
}
int months = ((endDate.Year * 12) + endDate.Month) - ((startDate.Year * 12) + startDate.Month);
if (endDate.Day >= startDate.Day)
{
months++;
}
return months;
}
you can use the following extension:
Code
public static class Ext
{
#region Public Methods
public static int GetAge(this DateTime #this)
{
var today = DateTime.Today;
return ((((today.Year - #this.Year) * 100) + (today.Month - #this.Month)) * 100 + today.Day - #this.Day) / 10000;
}
public static int DiffMonths(this DateTime #from, DateTime #to)
{
return (((((#to.Year - #from.Year) * 12) + (#to.Month - #from.Month)) * 100 + #to.Day - #from.Day) / 100);
}
public static int DiffYears(this DateTime #from, DateTime #to)
{
return ((((#to.Year - #from.Year) * 100) + (#to.Month - #from.Month)) * 100 + #to.Day - #from.Day) / 10000;
}
#endregion Public Methods
}
Implementation !
int Age;
int years;
int Months;
//Replace your own date
var d1 = new DateTime(2000, 10, 22);
var d2 = new DateTime(2003, 10, 20);
//Age
Age = d1.GetAge();
Age = d2.GetAge();
//positive
years = d1.DiffYears(d2);
Months = d1.DiffMonths(d2);
//negative
years = d2.DiffYears(d1);
Months = d2.DiffMonths(d1);
//Or
Months = Ext.DiffMonths(d1, d2);
years = Ext.DiffYears(d1, d2);
Here's a much more concise solution using VB.Net DateDiff for Year, Month, Day only. You can load the DateDiff library in C# as well.
date1 must be <= date2
VB.NET
Dim date1 = Now.AddDays(-2000)
Dim date2 = Now
Dim diffYears = DateDiff(DateInterval.Year, date1, date2) - If(date1.DayOfYear > date2.DayOfYear, 1, 0)
Dim diffMonths = DateDiff(DateInterval.Month, date1, date2) - diffYears * 12 - If(date1.Day > date2.Day, 1, 0)
Dim diffDays = If(date2.Day >= date1.Day, date2.Day - date1.Day, date2.Day + (Date.DaysInMonth(date1.Year, date1.Month) - date1.Day))
C#
DateTime date1 = Now.AddDays(-2000);
DateTime date2 = Now;
int diffYears = DateDiff(DateInterval.Year, date1, date2) - date1.DayOfYear > date2.DayOfYear ? 1 : 0;
int diffMonths = DateDiff(DateInterval.Month, date1, date2) - diffYears * 12 - date1.Day > date2.Day ? 1 : 0;
int diffDays = date2.Day >= date1.Day ? date2.Day - date1.Day : date2.Day + (System.DateTime.DaysInMonth(date1.Year, date1.Month) - date1.Day);
This is in response to Kirk Woll's answer. I don't have enough reputation points to reply to a comment yet...
I liked Kirk's solution and was going to shamelessly rip it off and use it in my code, but when I looked through it I realized it's way too complicated. Unnecessary switching and looping, and a public constructor that is pointless to use.
Here's my rewrite:
public class DateTimeSpan {
private DateTime _date1;
private DateTime _date2;
private int _years;
private int _months;
private int _days;
private int _hours;
private int _minutes;
private int _seconds;
private int _milliseconds;
public int Years { get { return _years; } }
public int Months { get { return _months; } }
public int Days { get { return _days; } }
public int Hours { get { return _hours; } }
public int Minutes { get { return _minutes; } }
public int Seconds { get { return _seconds; } }
public int Milliseconds { get { return _milliseconds; } }
public DateTimeSpan(DateTime date1, DateTime date2) {
_date1 = (date1 > date2) ? date1 : date2;
_date2 = (date2 < date1) ? date2 : date1;
_years = _date1.Year - _date2.Year;
_months = (_years * 12) + _date1.Month - _date2.Month;
TimeSpan t = (_date2 - _date1);
_days = t.Days;
_hours = t.Hours;
_minutes = t.Minutes;
_seconds = t.Seconds;
_milliseconds = t.Milliseconds;
}
public static DateTimeSpan CompareDates(DateTime date1, DateTime date2) {
return new DateTimeSpan(date1, date2);
}
}
Usage1, pretty much the same:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
var dateSpan = new DateTimeSpan(compareTo, now);
Console.WriteLine("Years: " + dateSpan.Years);
Console.WriteLine("Months: " + dateSpan.Months);
Console.WriteLine("Days: " + dateSpan.Days);
Console.WriteLine("Hours: " + dateSpan.Hours);
Console.WriteLine("Minutes: " + dateSpan.Minutes);
Console.WriteLine("Seconds: " + dateSpan.Seconds);
Console.WriteLine("Milliseconds: " + dateSpan.Milliseconds);
}
Usage2, similar:
void Main()
{
DateTime compareTo = DateTime.Parse("8/13/2010 8:33:21 AM");
DateTime now = DateTime.Parse("2/9/2012 10:10:11 AM");
Console.WriteLine("Years: " + DateTimeSpan.CompareDates(compareTo, now).Years);
Console.WriteLine("Months: " + DateTimeSpan.CompareDates(compareTo, now).Months);
Console.WriteLine("Days: " + DateTimeSpan.CompareDates(compareTo, now).Days);
Console.WriteLine("Hours: " + DateTimeSpan.CompareDates(compareTo, now).Hours);
Console.WriteLine("Minutes: " + DateTimeSpan.CompareDates(compareTo, now).Minutes);
Console.WriteLine("Seconds: " + DateTimeSpan.CompareDates(compareTo, now).Seconds);
Console.WriteLine("Milliseconds: " + DateTimeSpan.CompareDates(compareTo, now).Milliseconds);
}
In my case it is required to calculate the complete month from the start date to the day prior to this day in the next month or from start to end of month.
Ex: from 1/1/2018 to 31/1/2018 is a complete month
Ex2: from 5/1/2018 to 4/2/2018 is a complete month
so based on this here is my solution:
public static DateTime GetMonthEnd(DateTime StartDate, int MonthsCount = 1)
{
return StartDate.AddMonths(MonthsCount).AddDays(-1);
}
public static Tuple<int, int> CalcPeriod(DateTime StartDate, DateTime EndDate)
{
int MonthsCount = 0;
Tuple<int, int> Period;
while (true)
{
if (GetMonthEnd(StartDate) > EndDate)
break;
else
{
MonthsCount += 1;
StartDate = StartDate.AddMonths(1);
}
}
int RemainingDays = (EndDate - StartDate).Days + 1;
Period = new Tuple<int, int>(MonthsCount, RemainingDays);
return Period;
}
Usage:
Tuple<int, int> Period = CalcPeriod(FromDate, ToDate);
Note: in my case it was required to calculate the remaining days after the complete months so if it's not your case you could ignore the days result or even you could change the method return from tuple to integer.
public static int PayableMonthsInDuration(DateTime StartDate, DateTime EndDate)
{
int sy = StartDate.Year; int sm = StartDate.Month; int count = 0;
do
{
count++;if ((sy == EndDate.Year) && (sm >= EndDate.Month)) { break; }
sm++;if (sm == 13) { sm = 1; sy++; }
} while ((EndDate.Year >= sy) || (EndDate.Month >= sm));
return (count);
}
This solution is for Rental/subscription calculation, where difference doesn't means to be subtraction, it's meant to be the span in within those two dates.
I wrote a function to accomplish this, because the others ways weren't working for me.
public string getEndDate (DateTime startDate,decimal monthCount)
{
int y = startDate.Year;
int m = startDate.Month;
for (decimal i = monthCount; i > 1; i--)
{
m++;
if (m == 12)
{ y++;
m = 1;
}
}
return string.Format("{0}-{1}-{2}", y.ToString(), m.ToString(), startDate.Day.ToString());
}
There are not a lot of clear answers on this because you are always assuming things.
This solution calculates between two dates the months between assuming you want to save the day of month for comparison, (meaning that the day of the month is considered in the calculation)
Example, if you have a date of 30 Jan 2012, 29 Feb 2012 will not be a month but 01 March 2013 will.
It's been tested pretty thoroughly, probably will clean it up later as we use it, but here:
private static int TotalMonthDifference(DateTime dtThis, DateTime dtOther)
{
int intReturn = 0;
bool sameMonth = false;
if (dtOther.Date < dtThis.Date) //used for an error catch in program, returns -1
intReturn--;
int dayOfMonth = dtThis.Day; //captures the month of day for when it adds a month and doesn't have that many days
int daysinMonth = 0; //used to caputre how many days are in the month
while (dtOther.Date > dtThis.Date) //while Other date is still under the other
{
dtThis = dtThis.AddMonths(1); //as we loop, we just keep adding a month for testing
daysinMonth = DateTime.DaysInMonth(dtThis.Year, dtThis.Month); //grabs the days in the current tested month
if (dtThis.Day != dayOfMonth) //Example 30 Jan 2013 will go to 28 Feb when a month is added, so when it goes to march it will be 28th and not 30th
{
if (daysinMonth < dayOfMonth) // uses day in month max if can't set back to day of month
dtThis.AddDays(daysinMonth - dtThis.Day);
else
dtThis.AddDays(dayOfMonth - dtThis.Day);
}
if (((dtOther.Year == dtThis.Year) && (dtOther.Month == dtThis.Month))) //If the loop puts it in the same month and year
{
if (dtOther.Day >= dayOfMonth) //check to see if it is the same day or later to add one to month
intReturn++;
sameMonth = true; //sets this to cancel out of the normal counting of month
}
if ((!sameMonth)&&(dtOther.Date > dtThis.Date))//so as long as it didn't reach the same month (or if i started in the same month, one month ahead, add a month)
intReturn++;
}
return intReturn; //return month
}
Based on the excellent DateTimeSpan work done above, I've normalized the code a bit; this seems to work pretty well:
public class DateTimeSpan
{
private DateTimeSpan() { }
private DateTimeSpan(int years, int months, int days, int hours, int minutes, int seconds, int milliseconds)
{
Years = years;
Months = months;
Days = days;
Hours = hours;
Minutes = minutes;
Seconds = seconds;
Milliseconds = milliseconds;
}
public int Years { get; private set; } = 0;
public int Months { get; private set; } = 0;
public int Days { get; private set; } = 0;
public int Hours { get; private set; } = 0;
public int Minutes { get; private set; } = 0;
public int Seconds { get; private set; } = 0;
public int Milliseconds { get; private set; } = 0;
public static DateTimeSpan CompareDates(DateTime StartDate, DateTime EndDate)
{
if (StartDate.Equals(EndDate)) return new DateTimeSpan();
DateTimeSpan R = new DateTimeSpan();
bool Later;
if (Later = StartDate > EndDate)
{
DateTime D = StartDate;
StartDate = EndDate;
EndDate = D;
}
// Calculate Date Stuff
for (DateTime D = StartDate.AddYears(1); D < EndDate; D = D.AddYears(1), R.Years++) ;
if (R.Years > 0) StartDate = StartDate.AddYears(R.Years);
for (DateTime D = StartDate.AddMonths(1); D < EndDate; D = D.AddMonths(1), R.Months++) ;
if (R.Months > 0) StartDate = StartDate.AddMonths(R.Months);
for (DateTime D = StartDate.AddDays(1); D < EndDate; D = D.AddDays(1), R.Days++) ;
if (R.Days > 0) StartDate = StartDate.AddDays(R.Days);
// Calculate Time Stuff
TimeSpan T1 = EndDate - StartDate;
R.Hours = T1.Hours;
R.Minutes = T1.Minutes;
R.Seconds = T1.Seconds;
R.Milliseconds = T1.Milliseconds;
// Return answer. Negate values if the Start Date was later than the End Date
if (Later)
return new DateTimeSpan(-R.Years, -R.Months, -R.Days, -R.Hours, -R.Minutes, -R.Seconds, -R.Milliseconds);
return R;
}
}
Insane method that counts all days, so super precise
helper class :
public class DaysInMonth
{
public int Days { get; set; }
public int Month { get; set; }
public int Year { get; set; }
public bool Full { get; set; }
}
function:
public static List<DaysInMonth> MonthsDelta(DateTime start, DateTime end)
{
var dates = Enumerable.Range(0, 1 + end.Subtract(start).Days)
.Select(offset => start.AddDays(offset))
.ToArray();
DateTime? prev = null;
int days = 0;
List < DaysInMonth > list = new List<DaysInMonth>();
foreach (DateTime date in dates)
{
if (prev != null)
{
if(date.Month!=prev.GetValueOrDefault().Month)
{
DaysInMonth daysInMonth = new DaysInMonth();
daysInMonth.Days = days;
daysInMonth.Month = prev.GetValueOrDefault().Month;
daysInMonth.Year = prev.GetValueOrDefault().Year;
daysInMonth.Full = DateTime.DaysInMonth(daysInMonth.Year, daysInMonth.Month) == daysInMonth.Days;
list.Add(daysInMonth);
days = 0;
}
}
days++;
prev = date;
}
//------------------ add last
if (days > 0)
{
DaysInMonth daysInMonth = new DaysInMonth();
daysInMonth.Days = days;
daysInMonth.Month = prev.GetValueOrDefault().Month;
daysInMonth.Year = prev.GetValueOrDefault().Year;
daysInMonth.Full = DateTime.DaysInMonth(daysInMonth.Year, daysInMonth.Month) == daysInMonth.Days;
list.Add(daysInMonth);
}
return list;
}