I have a Cinemachine Freelook camera and i want it similar to Skyrim, where the character's rotation follows where the camera is pointing, but only on the Y axis so that i can move my mouse and look at the character from up and down;
This video demonstrates how MrKrabs can move in 3 dimensions, but won't turn.
I already tried creating a blank object and putting it at the center of the character, then using transform.LookAt(Camera) to make it point to where the camera is, and finally getting the Y value of the object's rotation, inverting it with -transform.position.y and applying it to MrKrabs, but it didn't work: it was jittery and overall just a bad user experience, is there a way to turn the gameobject based on the camera's rotation? (having the camera always watching his back)
Something like this should do the trick.
transform.rotation = Quaternion.Euler(0, Camera.main.transform.eulerAngles.y, 0);
Beware that if your camera is a child of your object it will rotate with it.
Related
it's a bit tricky.
the problem is that the target object is moving and bouncing so if i will make the freelook camera to lookat or follow the moving object the camera will also bounce and i don't want it.
what i want to do is the first part just like it is now the camera is moving behind the player while the player is looking at the moving target. then when the camera is behind the player the moving object is getting out of the screen area. the player head is still looking at it but the camera keep looking and follow the player.
i want somehow to make that the camera will rotate looking at the moving object but from the player point of view and not that the camera will follow/lookat the moving object.
here is a screenshot at the point the moving object(in red circle) is start moving out of the screen :
now i'm not sure how to move to the next part.
at this point i want the camera to stay behind the player and rotate looking at the moving object "like" through the player eyes.
i tested it again now and while the object is moving and the camera is behind the player like in the screenshot i can rotate the camera with the mouse like rotating the camera with the player head looking at the moving object the question how to do it by script ?
i want to rotate the camera with the player head to look at the moving object through the player point of view so the camera will not get the moving object bouncing and other effects.
This screenshot explain what i mean that the camera is still looking at the player and following the player but viewing with the player at the moving object. in this case i'm rotating the freelook camera with my mouse but i want to do it in the script.
well not sure what you are using currently as there is no code provided here ... but instead of directly passing in the target object's position simply use a vector where x and z come from your target object while y comes from your player object like e.g.
// not necessarily the player itself but the usual target object for your camera
Transform player;
Transform camera;
Transform lookTarget;
camera.position = /*Just the usual way how you get your camera position*/;
var targetPosition = lookTarget.position;
targetPosition.y = player.position.y;
// Snapping see https://docs.unity3d.com/ScriptReference/Transform.LookAt.html
camera.LookAt(targetPosition);
// or if you are e.g. using smooth interpolation
var targetRotation = Quaternion.LookRotation(targetPosition - camera.position);
camera.rotation = Quaternion.Slerp(camera.rotation, targetRotation, 5f * Time.deltaTime);
I'm trying to move the player to the position of the mouse in my game.
Right now movement along the x axis works fine, but I want the mouse y axis to control the characters movement along the z axis (because of my top-down camera's y being world z).
Right now mouse y controls player y, which looks like this in game.
And the code for it looks like this:
public Vector2 mousePos;
private Vector3 playerPos;
void update()
{
// Get mouse position from player
mousePos = Input.mousePosition;
// Move player with mouse
playerPos = new Vector3(mousePos.x, 0, mousePos.y);
transform.position = Camera.main.ScreenToWorldPoint(playerPos);
}
I then tried to just swap the y and z like this
playerPos = new Vector3(mousePos.x, mousePos.y, 0);
But instead of allowing me to control the z axis this snippet instead causes the player to lose all movement.
I'm very new to coding so I might be missing something completely obvious. What am I doing wrong?
Unity version: 2018.4.21f1
The example you gave isn't working because you're providing a z coordinate of 0 and when called on a perspective camera, Camera.ScreenToWorldPoint does some vector math, so in your scene view, your player is probably floating right on top of your camera. I can't explain the actual math because I don't understand it, but luckily for both of us, we don't need to! Essentially, the z coordinate is saying how far away from the camera to place the point, and since the view frustum of a perspective camera gets narrower closer to the camera, placing it at 0 means there's nowhere for it to go. how moving the object farther from the camera requires it to move farther to match the mouse position.
The bigger problem is that your method is wrong and there's a better way. Camera.ScreenToWorldPoint converts a mouse coordinate to a world space coordinate depending on what the camera is looking at, so you're essentially flippng the y and z coordinate, then feeding it into a method that figures out what coordinates need to be flipped.
It looks like this script is attached to your player gameObject, so it should look like this:
Camera cam;
[Range(1,10)] //this just creates a slider in the inspector
public int distanceFromCamera;
void Start()
{
//calling Camera.main is a shortcut for
//FindGameObjectsWithTag("MainCamera")
//so you should avoid calling it every frame
cam = Camera.main;
}
void Update()
{
//This will work for both perspective and orthographic cameras
transform.position = cam.ScreenToWorldPoint(
Input.mousePosition + new Vector3(0,0,distanceFromCamera));
}
If your camera is going to move closer or farther from the plane, make sure to add something that keeps the distance from camera updated.
That said, for most games having the player tied to the mouse cursor isn't usually what you're looking for. Generally you want some kind of input to move the player in some direction a certain amount. If that's what you're looking for, this part of the space shooter tutorial is a good introduction to player movement (though the code itself may be outdated).
This is a school project. I have a big cube which is like a planet. I have a small cube that can move on every side of the cube planet. The player moves forward automatically on its local z axis and I rotate it by 90 or -90 degrees to move left or right- but the player can control it like it's an up-down-left-right movement (made a script so they don't have to rotate the cube with 2 keys). It's like a Tron game so if I press the up key, I can't press down immediately because I leave a trail so I have to press the left or right keys. I have a problem with my camera movement. The camera follows the little cube from above, but I want it to lean a little when the little cube player gets close to the edge of a side so it lets me see the other side - where I'm planning to go.
I have a script where I use the center of the cube planet and the player's center as the direction vector and multiply it with the camera-player distance.
Vector3 direction = (target.position - center.position).normalized;
transform.position = target.position + direction * distance;
Then I point my camera's forward vector to the player cube's direction. I tried two codes but none of them worked perfectly. First I tried to rotate the camera with:
transform.rotation = Quaternion.LookRotation(-direction);
Shown in video. The problem with this is that since I don't tell the program the Up and Right vectors (I think), it sets them for itself to some random numbers so the camera sometimes do its own thing like it does a pirouette.
Next I tried this:
Quaternion rot = Quaternion.FromToRotation(transform.forward, -direction);
transform.Rotate(rot.eulerAngles, Space.World);
Shown in video. It's almost good but as the little cube moves, the camera starts steering slightly in the beginning and it gets worse and worse.
Do you have any ideas how can I make it work? I hope you understand what I would like to achieve. I'm trying to set the camera as to always show that when I press Up, my cube moves upward, when I press Right my cube always goes right etc. and when I reach the edge of my side the camera leans a bit towards the side I'm moving to.
Use dot product to find which orthogonal direction of your cube is closest to the camera's current up.
Vector3 closestToUp;
float greatestDot = 0f;
foreach (Vector3 dir in new Vector3[]{
target.forward, target.right, -target.forward, -target.right})
{
float curDot = Vector3.Dot(dir,transform.up);
if (curDot > greatestDot)
{
greatestDot = curDot;
closestToUp = dir;
}
}
Than, use that direction as the second parameter of Quaternion.LookRotation. This will keep its local up direction as aligned with the cube's "top" as possible given whatever new forward direction:
transform.rotation = Quaternion.LookRotation(-direction, closestToUp);
I need to set directly the Y-Rotation of the player to be equal to the Camera.main Y-Rotation I have searched a lot but can't find the answer.
I know it is simple but I can't manage it.
Edit: I tried this code
transform.rotation = Quaternion.Euler(Camera.main.transform.eulerAngles);
But it set the rotation of the whole rotation of the object equal to the rotation of the camera X,Y,and Z but what I want is to set only the y rotation.Thanks for help.
Edit2:
I forgot to say whay I am using this in I am making a VR Game so when the player rotates his head the camera rotates successfully.
Note: Why I want to do that? because when my player has to move forward it has to have the same y rotation of the camera.
That should work:
transform.rotation = Quaternion.Euler(transform.rotation.eulerAngles.x, Camera.main.transform.eulerAngles.y, transform.rotation.eulerAngles.z);
I am coding for a game and I have it running fine and all, but I ran into the issue of projectiles. I have no idea of how to calculate the mouse position and send a projectile over. I've looked though many stackoverflow tutorials and many youtube videos, but they are either too vague or very very complex. Could someone please explain the process? I have been coding in C# for 2 years now, so I do have background knowledge. Please Help!
Well, you don't tell what kind of game you are working on and what the projectile you want to "send over", whatever that means but here are a few pointers, maybe one will help:
#1: If you are doing a 2D game, and you want to send a projectile from some point toward the mouse cursor, then you simply get the position of the mouse by calling GetState() on your MouseState instance, and reading it's X and Y properties, then get the direction of the projectile by subtracting the location of the origin of the projectile from the mouse position. Then you can move the projectile along that line by storing the time you launched it, subtracting that every frame from the actual time to get how long it has been on its way and then adding that many times it's speed times the normalized direction to its origin coordinates.
Example:
For this I assume you have a Projectile class that has Vector2 field called origin, one called direction, one called position, a float called speed and an int called startTime and you have an instance of it with origin and speed already set. Modify as necessary for your actual code.
MouseState ms = new MouseState();
in your Update method:
ms.GetState();
projectile.direction = new Vector2(ms.X, ms.Y) - projectile.origin;
projectile.direction.Normalize();
projectile.position = projectile.origin + projectile.speed * (gameTime.TotalGameTime.TotalMilliseconds - projectile.stratTime) * projectile.direction;
And then in the Draw method you just draw the projectile to the coordinates in projectile.position.
#2: You are doing a 3D game and want to shoot a projectile originating from your camera and directed toward whatever your mouse is pointing at. You will need to generate a Ray with something like this:
private Ray getClickRay(Vector2 clickLocation, Viewport viewport, Matrix view, Matrix projection)
{
Vector3 nearPoint = viewport.Unproject(new Vector3(clickLocation.X, clickLocation.Y, 0.0f), projection, view, Matrix.Identity);
Vector3 farPoint = viewport.Unproject(new Vector3(clickLocation.X, clickLocation.Y, 1.0f), projection, view, Matrix.Identity);
Vector3 direction = farPoint - nearPoint;
direction.Normalize();
return new Ray(nearPoint, direction);
}
From there you can get the position of your projectile the same way as above, only using Vector3-s instead of Vector2-s.
#3: You want to simulate some sort of launcher and do a physical simulation on the trajectory of the projectile. Since I find this less likely than the first two I'll just describe the idea: you set a minimum and maximum rotation for your launcher along 2 axes, link each rotation to the ratio of the full width and length of your screen to the mouse position, and then use the angles and whatever other variables you have to calculate the direction and speed of the projectile at launch, then simulate physics each frame.
I hope one of these will help.