I used the following methods, but I failed.
How to solve it? Or is there another way?
Looking forward to your reply. Thanks!!!
This is my CMake project:
dotnet_xunit_template.csproj.in
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<ProjectName>#PROJECT_NAME#</ProjectName>
<TargetFramework>netcoreapp2.1</TargetFramework>
<IsPackable>false</IsPackable>
</PropertyGroup>
<ItemGroup>
<PackageReference Include="Microsoft.NET.Test.Sdk" Version="15.9.0" />
<PackageReference Include="xunit" Version="2.4.0" />
<PackageReference Include="xunit.runner.visualstudio" Version="2.4.0" />
</ItemGroup>
<ItemGroup>
#source_files_string#
</ItemGroup>
</Project>
UnitTest1.cs
using Xunit;
public class UnitTest1
{
[Fact]
public void Test1()
{
int i = 0;
i = 2;
}
}
CMakeLists.txt
cmake_minimum_required(VERSION 3.8)
project(xunitproject)
set(source_files_string)
file(GLOB_RECURSE SRC_FILES ${CMAKE_CURRENT_LIST_DIR}/*.cs)
foreach(item ${SRC_FILES})
# <Compile Include="exe_test.cs" />
set(source_files_string
"${source_files_string}<Compile Include=\"${item}\" />
"
)
endforeach()
configure_file(dotnet_xunit_template.csproj.in ${PROJECT_NAME}.csproj #ONLY)
include_external_msproject(
${PROJECT_NAME} ${PROJECT_NAME}.csproj
)
Build the project into Visual Studio 2017, and the error message is as follows:
Your project does not reference ".NETFramework,Version=v4.0" framework. Add a reference to ".NETFramework,Version=v4.0" in the "TargetFrameworks" property of your project file and then re-run NuGet restore. ZERO_CHECK C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\MSBuild\Microsoft\NuGet\15.0\Microsoft.NuGet.targets 186
Related
I am working on source generator and I have problems with dependencies:
It will not contribute to the output and compilation errors may occur as a result. Exception was of type 'FileNotFoundException' with message 'Could not load file or assembly 'Flurl.Http, Version=3.0.1.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified.'
There is a lot of information on how to pack dependencies into nuget, but I reference analyzer project directly like this:
<ProjectReference Include="SG.csproj" OutputItemType="Analyzer" ReferenceOutputAssembly="false" />
In analyzer project I added <CopyLocalLockFileAssemblies>true</CopyLocalLockFileAssemblies> and all dependencies are available in output directory, but VS is not using that directory - it uses AppData\Local\Temp\VBCSCompiler\AnalyzerAssemblyLoader\[...] instead and it copies only one DLL there.
What can be done to make that work?
I found the way to make it work more or less reliably with some hacks.
Before that I also tried ILMerge, but it didn't work (missing method exceptions).
Solution:
First of all I embeded dependencies in source generator assembly like this:
<ItemGroup>
<PackageReference Include="Newtonsoft.Json" Version="13.0.1" GeneratePathProperty="true" PrivateAssets="all" />
</ItemGroup>
<ItemGroup>
<EmbeddedResource Include="$(PKGNewtonsoft_Json)\lib\netstandard2.0\Newtonsoft.Json.dll" Visible="false" />
</ItemGroup>
Then I created AssemblyResolve handler for AppDomain (static constructor in generator class) like so:
AppDomain.CurrentDomain.AssemblyResolve += (_, args) =>
{
AssemblyName name = new(args.Name);
Assembly loadedAssembly = AppDomain.CurrentDomain.GetAssemblies().FirstOrDefault(a => a.GetName().FullName == name.FullName);
if (loadedAssembly != null)
{
return loadedAssembly;
}
string resourceName = $"Namespace.{name.Name}.dll";
using Stream resourceStream = Assembly.GetExecutingAssembly().GetManifestResourceStream(resourceName);
if (resourceStream == null)
{
return null;
}
using MemoryStream memoryStream = new MemoryStream();
resourceStream.CopyTo(memoryStream);
return Assembly.Load(memoryStream.ToArray());
};
The way that this should work is outlined in the source-generators cook-book, with their example being:
<Project>
<PropertyGroup>
<GeneratePackageOnBuild>true</GeneratePackageOnBuild> <!-- Generates a package at build -->
<IncludeBuildOutput>false</IncludeBuildOutput> <!-- Do not include the generator as a lib dependency -->
</PropertyGroup>
<ItemGroup>
<!-- Take a private dependency on Newtonsoft.Json (PrivateAssets=all) Consumers of this generator will not reference it.
Set GeneratePathProperty=true so we can reference the binaries via the PKGNewtonsoft_Json property -->
<PackageReference Include="Newtonsoft.Json" Version="12.0.1" PrivateAssets="all" GeneratePathProperty="true" />
<!-- Package the generator in the analyzer directory of the nuget package -->
<None Include="$(OutputPath)\$(AssemblyName).dll" Pack="true" PackagePath="analyzers/dotnet/cs" Visible="false" />
<!-- Package the Newtonsoft.Json dependency alongside the generator assembly -->
<None Include="$(PkgNewtonsoft_Json)\lib\netstandard2.0\*.dll" Pack="true" PackagePath="analyzers/dotnet/cs" Visible="false" />
</ItemGroup>
</Project>
However, it is my experience that this is still not reliable or robust; this is acknowledged, and I get the impression that improving this experience is part of future planning, but: right now, honestly it is better off simply not using dependencies outside of the core framework and the Roslyn libraries that are already loaded. If your dependencies are in the same repo as the analyzer/generator, you might be able to simply suck in the code during build, for example from here:
<ItemGroup>
<!-- compile what we need from protobuf-net directly; package refs cause pure pain in anaylizers-->
<Compile Include="../protobuf-net.Core/**/*.cs" Link="protobuf-net.Core"/>
<Compile Remove="../protobuf-net.Core/obj/**/*.cs" />
<Compile Include="../protobuf-net.Reflection/**/*.cs" Link="protobuf-net.Reflection"/>
<Compile Remove="../protobuf-net.Reflection/obj/**/*.cs" />
</ItemGroup>
There is a definitive answer to this now. The Source Generator Samples contain an example .csproj which has the required setup.
I used this to make a source generator with Sprache, works great.
Pasting the example .csproj here for reference:
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<TargetFramework>netstandard2.0</TargetFramework>
<LangVersion>8.0</LangVersion>
</PropertyGroup>
<ItemGroup>
<PackageReference Include="Microsoft.CodeAnalysis.CSharp" Version="$(MicrosoftNetCompilersToolsetVersion)" PrivateAssets="all" />
<PackageReference Include="Microsoft.CodeAnalysis.Analyzers" Version="3.0.0" PrivateAssets="all" />
</ItemGroup>
<ItemGroup>
<!-- Generator dependencies -->
<PackageReference Include="CsvTextFieldParser" Version="1.2.2-preview" GeneratePathProperty="true" PrivateAssets="all" />
<PackageReference Include="Handlebars.Net" Version="1.10.1" GeneratePathProperty="true" PrivateAssets="all" />
<PackageReference Include="Newtonsoft.Json" Version="12.0.1" GeneratePathProperty="true" PrivateAssets="all" />
</ItemGroup>
<PropertyGroup>
<GetTargetPathDependsOn>$(GetTargetPathDependsOn)</GetTargetPathDependsOn>;GetDependencyTargetPaths
</PropertyGroup>
<Target Name="GetDependencyTargetPaths">
<ItemGroup>
<TargetPathWithTargetPlatformMoniker Include="$(PKGCsvTextFieldParser)\lib\netstandard2.0\CsvTextFieldParser.dll" IncludeRuntimeDependency="false" />
<TargetPathWithTargetPlatformMoniker Include="$(PKGHandlebars_Net)\lib\netstandard2.0\Handlebars.dll" IncludeRuntimeDependency="false" />
<TargetPathWithTargetPlatformMoniker Include="$(PKGNewtonsoft_Json)\lib\netstandard2.0\Newtonsoft.Json.dll" IncludeRuntimeDependency="false" />
</ItemGroup>
</Target>
</Project>
ProjectReference is not the same as PackageReference!
The GeneratePathProperty will not take any action for ProjectReference because it is not a package.
So, you just have to add the TargetPathWithTargetPlatformMoniker pointing to your local DLL into Source Generator csproj.
Example with default output locations:
Folder structure
- Solution Folder
| - MySolution.sln
| + MyProject
| | - MyProject.csproj
| | + bin
| | | + Debug
| | | | + netstandard2.0
| | | | | - MyProject.dll
| | | + Release
| | | | + netstandard2.0
| | | | | - MyProject.dll
| + MySourceGenerator
| | - MySourceGenerator.csproj
MySourceGenerator.csproj
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<TargetFramework>netstandard2.0</TargetFramework>
<IsRoslynComponent>true</IsRoslynComponent>
<EnforceExtendedAnalyzerRules>true</EnforceExtendedAnalyzerRules>
</PropertyGroup>
<ItemGroup>
<PackageReference Include="Microsoft.CodeAnalysis.Analyzers" Version="3.3.4" PrivateAssets="all" />
<PackageReference Include="Microsoft.CodeAnalysis.CSharp" Version="4.4.0" PrivateAssets="all" />
</ItemGroup>
<ItemGroup>
<ProjectReference Include="..\MyProject\MyProject.csproj" PrivateAssets="all"/>
</ItemGroup>
<PropertyGroup>
<GetTargetPathDependsOn>$(GetTargetPathDependsOn);GetDependencyTargetPaths</GetTargetPathDependsOn>
</PropertyGroup>
<Target Name="GetDependencyTargetPaths">
<ItemGroup>
<TargetPathWithTargetPlatformMoniker Include="..\MyProject\bin\$(Configuration)\netstandard2.0\MyProject.dll" IncludeRuntimeDependency="false"/>
</ItemGroup>
</Target>
</Project>
I am trying to use
wait.Until(SeleniumExtras.WaitHelpers.ExpectedConditions.ElementIsVisible(By.Id("logonIdentifier")));
However I am getting an error Could not load file or assembly 'SeleniumExtras.WaitHelpers. I am using
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<TargetFramework>netcoreapp2.1</TargetFramework>
</PropertyGroup>
<ItemGroup>
<PackageReference Include="DotNetSeleniumExtras.WaitHelpers" Version="3.11.0" />
<PackageReference Include="NUnit" Version="3.12.0" />
<PackageReference Include="TestProject.SDK" Version="0.63.1" />
</ItemGroup>
</Project>
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<TargetFramework>netcoreapp2.1</TargetFramework>
<IsPackable>false</IsPackable>
<PublishChromeDriver>true</PublishChromeDriver>
</PropertyGroup>
<ItemGroup>
<PackageReference Include="DotNetSeleniumExtras.WaitHelpers" Version="3.11.0" />
<PackageReference Include="Microsoft.NET.Test.Sdk" Version="16.5.0" />
<PackageReference Include="MSTest.TestAdapter" Version="2.1.0" />
<PackageReference Include="MSTest.TestFramework" Version="2.1.0" />
<PackageReference Include="coverlet.collector" Version="1.2.0" />
</ItemGroup>
<ItemGroup>
<ProjectReference Include="..\testForLogin\testForLogin.csproj" />
</ItemGroup>
</Project>
It works locally but when I tried pushing it to the testproject.io I get the above error message.
I am not able to change it to the recommend selenium web driver version.
The package you are using is not .NET Core compliant. With some restructure of the code what you need is available with
using OpenQA.Selenium.Support.UI;
Then take the code that used the SeleniumExtras wait helpers and change to use methods on your driver class such as
WebDriverWait browserWait = new WebDriverWait(driver, TimeSpan.FromSeconds(90));
browserWait.Until(driver => driver.FindElement(By.Id("logonIdentifier")).Displayed);
You could easily check the properties on the driver as well, say for the Url, such as
const string expectedUrl = "https://www.google.com";
browserWait.Until(driver => driver.Url == expectedUrl);
Then go remove the package you are no longer using from your project
dotnet remove package DotNetSeleniumExtras.WaitHelpers
Which funny enough is pretty much the homepage of https://www.selenium.dev/documentation/en/ but when you search you tend to get distracted by the SeleniumExtras project.
On Startup.cs in my Azure Function v2 project:
using Microsoft.Azure.Functions.Extensions.DependencyInjection;
using Microsoft.Extensions.DependencyInjection;
using MyCompany.MyLib.Contracts; //namespace from external library
[assembly: FunctionsStartup(typeof(Startup))]
namespace Test
{
public class Startup : FunctionsStartup
{
public override void Configure(IFunctionsHostBuilder builder)
{
builder.Services.AddTransient(typeof(Logging.ILogger<>), typeof(Logging.Logger<>));
builder.Services.AddTransient<IUserLogic, UserLogic>();
builder.Services.AddTransient<IBillingLogic, BillingLogic>(); //---> loads up from above referenced "MyCompany.MyLib.Contracts" namespace and this namespace is from externally referenced class library but with in same solution
}
}
}
The above code with my own custom classes within function app project like "EmailLogic", "Logger" works fine.
But the moment I added up custom classes to services container like "BillingLogic" from external C# library project which is added as reference project from the existing visual studio solution it throws up below issue:
"A host error has occurred during startup operation '945918c0-af3a-4d50-ab1d-ac405d4f1c7b'. [2/3/2020 2:11:02 PM] MyFunction.FunctionApp: Could not load file or assembly 'MyCompany.MyLib.Contracts, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null'. Could not find or load a specific file. (Exception from HRESULT: 0x80131621). System.Private.CoreLib: Could not load file or assembly ''MyCompany.MyLib.Contracts, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null"
If these lines from "referenced external projects" are removed,
using MyCompany.MyLib.Contracts;
builder.Services.AddTransient<IBillingLogic, BillingLogic>();
startup.cs works as expected but referring this external class from referenced project is must for my solution.
My Azure function csproj file:
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<TargetFramework>netstandard2.0</TargetFramework>
<AzureFunctionsVersion>v2</AzureFunctionsVersion>
<GenerateAssemblyInfo>false</GenerateAssemblyInfo>
<AutoGenerateBindingRedirects>false</AutoGenerateBindingRedirects>
</PropertyGroup>
<ItemGroup>
<PackageReference Include="Microsoft.Azure.Functions.Extensions" Version="1.0.0" />
<PackageReference Include="Microsoft.Azure.Storage.Queue" Version="11.1.2" />
<PackageReference Include="Microsoft.Azure.WebJobs.Extensions.Storage" Version="3.0.8" />
<PackageReference Include="Microsoft.Extensions.DependencyInjection" Version="2.2.0" />
<PackageReference Include="Microsoft.NET.Sdk.Functions" Version="1.0.29" />
<PackageReference Include="NLog" Version="4.6.8" />
<PackageReference Include="Newtonsoft.Json" Version="12.0.3" />
<PackageReference Include="NLog.Extensions.AzureStorage" Version="1.1.4" />
<PackageReference Include="Microsoft.Azure.DocumentDB.Core" Version="2.9.2" />
</ItemGroup>
<ItemGroup>
<ProjectReference Include="..\MyCSharpLib.DataStore\MyCSharpLib.DataStore.csproj">
<Private>true</Private>
</ProjectReference>
</ItemGroup>
<ItemGroup>
<None Update="appsettings.json">
<CopyToOutputDirectory>Always</CopyToOutputDirectory>
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
</None>
<None Update="host.json">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</None>
<None Update="local.settings.json">
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
<CopyToPublishDirectory>Never</CopyToPublishDirectory>
</None>
<None Update="nlog.config">
<CopyToOutputDirectory>Always</CopyToOutputDirectory>
<CopyToPublishDirectory>Always</CopyToPublishDirectory>
</None>
</ItemGroup>
</Project>
MyCSharpLib.DataStore.csproj file:
<PropertyGroup>
<TargetFramework>netstandard2.0</TargetFramework>
<RuntimeIdentifier>win7-x64</RuntimeIdentifier>
<Platforms>x64</Platforms>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
<ItemGroup>
<PackageReference Include="Microsoft.Azure.Cosmos.Table" Version="1.0.6" />
<PackageReference Include="Microsoft.Azure.DocumentDB.Core" Version="2.9.2" />
<PackageReference Include="Microsoft.Azure.Storage.Blob" Version="11.1.1" />
<PackageReference Include="Microsoft.CSharp" Version="4.7.0" />
<PackageReference Include="Newtonsoft.Json.Bson" Version="1.0.1" />
<PackageReference Include="Polly" Version="5.3.1" />
<PackageReference Include="StackExchange.Redis" Version="1.2.6" />
</ItemGroup>
<ItemGroup>
<ProjectReference Include="..\MyContractLib.Contracts\MyContractLib.Contracts.csproj" />
</ItemGroup>
</Project>
MyCSharpLib.DataStore
.\MyContractLib.Contracts\MyContractLib.Contracts.csproj
My Azure function csproj file:
<ProjectReference Include="..\MyCSharpLib.DataStore\MyCSharpLib.DataStore.csproj">
so
using MyCompany.MyLib.Contracts;
is coming through the ref to DataStore which then has ref to MyContractLib.Contracts
But it is not coping the dll as its silly, so either get Azure function csproj to ref MyLib.Contracts
or do this
How to set dependencies when I use .NET Standard 2.0 DLL libraries with a .NET Framework console application?
which is on all your std libs add
<RestoreProjectStyle>PackageReference</RestoreProjectStyle>
so on both your standard libs
<PropertyGroup>
<TargetFramework>netstandard2.0</TargetFramework>
<RestoreProjectStyle>PackageReference</RestoreProjectStyle>
</PropertyGroup>
if this does not work i will delete
I am experimenting with Visual Studio on the Mac. I have a _layout.cshtml file that works fine in the Windows version of VS but I am getting multiple errors when executing it on the Mac.
The error is:
One or more compilation references are missing. Ensure that your project is referencing 'Microsoft.NET.Sdk.Web' and the 'PreserveCompilationContext' property is not set to false.
And it is flagging many common razor function such as
The type or namespace name 'HtmlString' could not be found (are you missing a using directive or an assembly reference?)
private HtmlString WriteOption(string Menu)
The name 'Styles' does not exist in the current context
#Styles.Render( "~/Content/css" )
The name 'Scripts' does not exist in the current context
#Scripts.Render( "~/bundles/modernizr" )
The name 'Session' does not exist in the current context
int CurrentCustomerId = (Session["CurrentCustomerId"] == null ? -1 : (int)Session["CurrentCustomerId"]);
I've tried numerous things such as
adding and removing Microsoft.AspNetCore
ensuring PreserveCompilationContext is set to true
adding Microsoft.AspNetCoreRazor packages
adding: #using HttpContext.Current;
adding: #using System.Web.Optimization;
rebooting, cleaning and rebuilding....
This is what my .csproj file looks like:
<Project Sdk="Microsoft.NET.Sdk.Web">
<PropertyGroup>
<TargetFramework>netcoreapp2.0</TargetFramework>
<PreserveCompilationContext>true</PreserveCompilationContext>
</PropertyGroup>
<ItemGroup>
<PackageReference Include="Newtonsoft.Json" Version="10.0.3" />
<PackageReference Include="jQuery" Version="3.3.1" />
<PackageReference Include="bootstrap" Version="4.0.0" />
<PackageReference Include="log4net" Version="2.0.8" />
<PackageReference Include="FontAwesome" Version="4.7.0" />
<PackageReference Include="Microsoft.EntityFrameworkCore.Sqlite.Core" Version="2.0.1" />
<PackageReference Include="Microsoft.EntityFrameworkCore.Sqlite.Design" Version="1.1.5" />
<PackageReference Include="Microsoft.EntityFrameworkCore.Sqlite" Version="2.0.1" />
<PackageReference Include="EntityFramework" Version="6.2.0" />
<PackageReference Include="Microsoft.AspNetCore" Version="2.0.1" />
<PackageReference Include="Microsoft.AspNetCore.Mvc" Version="2.0.2" />
<PackageReference Include="Microsoft.AspNetCore.All" Version="2.0.5" />
<PackageReference Include="Microsoft.AspNetCore.Mvc.Razor" Version="2.0.2" />
<PackageReference Include="Microsoft.AspNetCore.Mvc.Core" Version="2.0.2" />
<PackageReference Include="Microsoft.AspNet.Razor" Version="3.2.3" />
</ItemGroup>
<ItemGroup>
<DotNetCliToolReference Include="Microsoft.VisualStudio.Web.CodeGeneration.Tools" Version="2.0.0" />
</ItemGroup>
<ItemGroup>
<Folder Include="Data\" />
<Folder Include="Views\Customer\" />
<Folder Include="Views\Contact\" />
<Folder Include="Views\User\" />
<Folder Include="wwwroot\img\" />
<Folder Include="Helpers\" />
</ItemGroup>
<ItemGroup>
<Compile Remove="Views\Customer\Index.cshtml.cs" />
</ItemGroup>
<ItemGroup>
<Content Remove="Views\Home\About.cshtml" />
<Content Remove="Views\Home\Contact.cshtml" />
<Content Remove="wwwroot\images\banner1.svg" />
<Content Remove="wwwroot\images\banner2.svg" />
<Content Remove="wwwroot\images\banner3.svg" />
<Content Remove="wwwroot\images\banner4.svg" />
</ItemGroup>
</Project>
Here's the IDE vitals:
Visual Studio Community 2017 for Mac
Version 7.3.3 (build 12)
Installation UUID: 0237be3a-3db7-4f5c-af82-a9699df5a1f9
Runtime:
Mono 5.8.0.108 (2017-10/9aa78573ee2) (64-bit)
GTK+ 2.24.23 (Raleigh theme)
Package version: 508000108
NuGet
Version: 4.3.1.4445
.NET Core
Runtime: /usr/local/share/dotnet/dotnet
Runtime Version: 2.0.5
SDK: /usr/local/share/dotnet/sdk/2.1.4/Sdks
SDK Version: 2.1.4
MSBuild SDKs: /Library/Frameworks/Mono.framework/Versions/5.8.0/lib/mono/msbuild/15.0/bin/Sdks
Any suggestions?
There is a difference between "ASP.NET Web Application" and "ASP.NET Core Web Application". Your project is of the first type which uses .Net Framework and does not work on Mac. The "Core" type uses .Net Core and is supported on Mac.
The project types have some differences, like the absence of #Styles and #Scripts. More differences can be found here: http://www.mithunvp.com/difference-between-asp-net-mvc6-asp-net-mvc5/
If you would like to migrate your project, you can use this guide: https://learn.microsoft.com/en-us/aspnet/core/migration/mvc
I have a unit Test that checks that all my service methods make a call to some authorization method.
I'm checking this in a unit Test using Roslyn.
The test runs fine on my local machine but fails on the build server, because project.Documents is empty.
I'm using VS 2017 and mstest V2.
The build server is a private on prem build agent in VSTS.
[TestMethod]
public async Task All_public_Service_Methods_should_check_authorization()
{
var workspace = MSBuildWorkspace.Create();
var project = await workspace.OpenProjectAsync(pathToCsprojFile).ConfigureAwait(false);
Console.WriteLine($"AssemblyName is {project.AssemblyName}"); // same output
Console.WriteLine($"FilePath is {project.FilePath}"); // same output
Console.WriteLine($"Documents are {string.Join(Environment.NewLine,project.Documents.Select(d => d.FilePath))}"); // empty on build server
//...
}
This is the csproj, that I'm trying to load
<Project Sdk="Microsoft.NET.Sdk">
<PropertyGroup>
<TargetFramework>netstandard1.5</TargetFramework>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|AnyCPU'">
<AllowUnsafeBlocks>True</AllowUnsafeBlocks>
<DocumentationFile>bin\Debug\netstandard1.5\adremes.Exchange.Services.xml</DocumentationFile>
</PropertyGroup>
<PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|AnyCPU'">
<AllowUnsafeBlocks>True</AllowUnsafeBlocks>
<DocumentationFile>bin\Release\netstandard1.5\adremes.Exchange.Services.xml</DocumentationFile>
</PropertyGroup>
<ItemGroup>
<Folder Include="Properties\" />
</ItemGroup>
<ItemGroup>
<PackageReference Include="adremes.Common" Version="1.4.0" />
<PackageReference Include="AutoMapper" Version="5.2.0" />
<PackageReference Include="AutoMapper.Collection" Version="2.1.2" />
<PackageReference Include="DocumentFormat.OpenXml" Version="2.7.1" />
<PackageReference Include="Microsoft.AspNetCore.Authorization" Version="1.1.1" />
<PackageReference Include="Microsoft.AspNetCore.Hosting.Abstractions" Version="1.1.1" />
<PackageReference Include="Microsoft.AspNetCore.Identity" Version="1.1.1" />
</ItemGroup>
<ItemGroup>
<ProjectReference Include="..\adremes.Exchange.Common\adremes.Exchange.Common.csproj" />
<ProjectReference Include="..\adremes.Exchange.Data\adremes.Exchange.Data.csproj" />
</ItemGroup>
</Project>