Related
This is probably a stupid question, but just in case....
We have a 3rd party package with weird models like:
public partial class CountingDevice
{
public int countingDeviceNo { get; set; }
public string countingDeviceName { get; set; }
public string obis { get; set; }
public int integralPart { get; set; }
public bool integralPartFieldSpecified;
public int fractionalPart { get; set; }
public bool fractionalPartFieldSpecified;
public double value { get; set; }
public bool valueFieldSpecified;
public bool offPeakFlag { get; set; }
public bool offPeakFlagFieldSpecified;
public ExpectedMeterReading expectedMeterReading { get; set; }
// snipped for brevity
}
You'll notice that sometimes there are pairs of fields like integralPart and integralPartFieldSpecified.
Here is the problem: If I simply assign some value to integralPart but do not set integralPartFieldSpecified = true, the value of integralPart will be completely ignored causing the solution to fail.
So when mapping our own models to this madness, I need to litter the code with constructs like:
if (IntegralPart != null)
{
countingDevice.integralPartSpecified = true;
countingDevice.integralPart = (int)IntegralPart!;
}
Both in the interest of reducing lines of code and not stumbling over a minefield, I would like to do any one of the following:
A. Overload the = operator so it will automatically check for a property which is a boolean and has "Specified" concatenated to the current property's name. If such a property exists, it will be assigned true when the value is assigned; if not, then assignment will operate as normal. Ideally, it should be "smart" enough to assign "...Specified" to false if the value assigned is null/default/empty.
B. Create some customer operator which will do the same as A.
C. Create some method which I could invoke in a concise and preferably typesafe way to do the same.
Is this possible?
If so, how?
To make it clear: I need to build quite a few wrappers.
I don't want to repeat this logic for every field and worry about missing some fields which it applies to.
I want a generic way of assigning both fields at once if the "Specified" field exists and being able to do assignments in exactly the same way if it does not exist.
not stumbling over a minefield
Encapsulate the minefield.
If you don't control this 3rd party DTO then don't use it throughout your domain. Encapsulate or wrap the integration of this 3rd party tool within a black box that you control. Then throughout your domain use your models.
Within the integration component for this 3rd party system, simply map to/from your Domain Models and this 3rd party DTO. So this one extra line of code which sets a second field on the DTO only exists in that one place.
Another (expensive) solution would be to write a method that takes in an object, a property name, and the new property value. You can then use reflection to both set the property value for the specified property, as well as search for the bool field that you want to set (if it exists).
Note that you need to pass the correct type for the property. There's no compile-time checking that you're passing a double instead of a string for the value property, for example.
Below I've created an extension method on the object type to simplify calling the method in our main code (the method becomes a member of the object itself):
public static class Extensions
{
// Requires: using System.Reflection;
public static bool SetPropertyAndSpecified(this object obj,
string propertyName, object propertyValue)
{
// Argument validation left to user
// Check if 'obj' has specified 'propertyName'
// and set 'propertyValue' if it does
PropertyInfo prop = obj.GetType().GetProperty(propertyName,
BindingFlags.Public | BindingFlags.Instance);
if (prop != null && prop.CanWrite)
{
prop.SetValue(obj, propertyValue, null);
// Check for related "FieldSpecified" field
// and set it to 'true' if it exists
obj.GetType().GetField($"{propertyName}FieldSpecified",
BindingFlags.Public | BindingFlags.Instance)?.SetValue(obj, true);
return true;
}
return false;
}
}
After you add this class to your project, you can do something like:
static void Main(string[] args)
{
var counter = new CountingDevice();
// Note that 'valueFieldSpecified' and `integralPartFieldSpecified'
// are set to 'false' on 'counter'
// Call our method to set some properties
counter.SetPropertyAndSpecified(nameof(counter.integralPart), 42);
counter.SetPropertyAndSpecified(nameof(counter.value), 69d);
// Now 'valueFieldSpecified' and 'integralPartFieldSpecified'
// are set to 'true' on 'counter'
}
You cannot overload the = operator in C#.
You can just use custom properties and set the "FieldSpecified" fields in the setters e.g.
private int _integralPart;
public int integralPart
{
get { return _integralPart; }
set
{
_integralPart = value;
integralPartFieldSpecified = true;
}
}
public bool integralPartFieldSpecified;
Update
If you want a generic solution you can use a generic class for properties that you want to achieve the specified behaviour with e.g.
public class ValueWithSpecifiedCheck<T>
{
private T _fieldValue;
public T FieldValue
{
get
{
return _fieldValue;
}
set
{
_fieldValue = value;
FieldSpecified = true;
}
}
public bool FieldSpecified { get; set; }
}
public class Data
{
public ValueWithSpecifiedCheck<int> IntegralPart { get; set; }
}
Then the class/property would be used as following:
public static void Main()
{
var data = new Data();
data.IntegralPart = new ValueWithSpecifiedCheck<int>();
data.IntegralPart.FieldValue = 7;
Console.WriteLine(data.IntegralPart.FieldSpecified);// Prints true
}
If you implement a generic solution and add implicit conversion operators, it's quite convenient to use.
Here's a sample Optional<T> struct (I made it a readonly struct to ensure immutable mechanics):
public readonly struct Optional<T> where T : struct
{
public Optional(T value)
{
_value = value;
}
public static implicit operator T(Optional<T> opt) => opt.Value;
public static implicit operator Optional<T>(T opt) => new(opt);
public T Value => _value!.Value;
public bool Specified => _value is not null;
public override string ToString() => _value is null ? "<NONE>" : _value.ToString()!;
readonly T? _value;
}
You could use that to implement your CountingDevice class like so:
public partial class CountingDevice
{
public int countingDeviceNo { get; set; }
public string countingDeviceName { get; set; }
public string obis { get; set; }
public Optional<int> integralPart { get; set; }
public Optional<int> fractionalPart { get; set; }
public Optional<double> value { get; set; }
public Optional<bool> offPeakFlag { get; set; }
// snipped for brevity
}
Usage is quite natural because of the implicit conversions:
public static void Main()
{
var dev = new CountingDevice
{
integralPart = 10, // Can initialise with the underlying type.
value = 123.456
};
Console.WriteLine(dev.fractionalPart.Specified); // False
Console.WriteLine(dev.integralPart.Specified); // True
Console.WriteLine(dev.value); // 123.456
Console.WriteLine(dev.value.ToString()); // 123.456
Console.WriteLine(dev.fractionalPart.ToString()); // "<NONE>"
dev.fractionalPart = 42; // Can set the value using int.
Console.WriteLine(dev.fractionalPart.Specified); // True
Console.WriteLine(dev.fractionalPart); // 42
var optCopy = dev.offPeakFlag;
Console.WriteLine(optCopy.Specified); // False
dev.offPeakFlag = true;
Console.WriteLine(dev.offPeakFlag.Specified); // True
Console.WriteLine(optCopy.Specified); // Still False - not affected by the original.
Console.WriteLine(optCopy); // Throws an exception because its not specified.
}
You might also want to use optional reference types, but to do that you will need to declare a generic with the class constraint:
public readonly struct OptionalRef<T> where T : class
{
public OptionalRef(T value)
{
_value = value;
}
public static implicit operator T(OptionalRef<T> opt) => opt.Value;
public static implicit operator OptionalRef<T>(T opt) => new(opt);
public T Value => _value ?? throw new InvalidOperationException("Accessing an unspecified value.");
public bool Specified => _value is not null;
public override string ToString() => _value is null ? "<NONE>" : _value.ToString()!;
readonly T? _value;
}
Personally, I think that's a bit overkill. I'd just use nullable value types, int?, double? etc, but it depends on the expected usage.
C# doesn't allow overloading the = operator (unlike eg C++). However, your suggestion C should work. It's a bit of a hassle, too, since you'll have to write a bunch of methods, but you could write an extension method such as
public static class Extensions
{
public static void UpdateIntegralPart(this CountingDevice dev, double value)
{
dev.integralPart = value;
dev.integralPartSpecified = true;
}
}
Then you can call
countingDevice.UpdateIntegralPart(1234);
How do you give a C# auto-property an initial value?
I either use the constructor, or revert to the old syntax.
Using the Constructor:
class Person
{
public Person()
{
Name = "Initial Name";
}
public string Name { get; set; }
}
Using normal property syntax (with an initial value)
private string name = "Initial Name";
public string Name
{
get
{
return name;
}
set
{
name = value;
}
}
Is there a better way?
In C# 5 and earlier, to give auto implemented properties an initial value, you have to do it in a constructor.
Since C# 6.0, you can specify initial value in-line. The syntax is:
public int X { get; set; } = x; // C# 6 or higher
DefaultValueAttribute is intended to be used by the VS designer (or any other consumer) to specify a default value, not an initial value. (Even if in designed object, initial value is the default value).
At compile time DefaultValueAttribute will not impact the generated IL and it will not be read to initialize the property to that value (see DefaultValue attribute is not working with my Auto Property).
Example of attributes that impact the IL are ThreadStaticAttribute, CallerMemberNameAttribute, ...
Edited on 1/2/15
C# 6 :
With C# 6 you can initialize auto-properties directly (finally!), there are now other answers that describe that.
C# 5 and below:
Though the intended use of the attribute is not to actually set the values of the properties, you can use reflection to always set them anyway...
public class DefaultValuesTest
{
public DefaultValuesTest()
{
foreach (PropertyDescriptor property in TypeDescriptor.GetProperties(this))
{
DefaultValueAttribute myAttribute = (DefaultValueAttribute)property.Attributes[typeof(DefaultValueAttribute)];
if (myAttribute != null)
{
property.SetValue(this, myAttribute.Value);
}
}
}
public void DoTest()
{
var db = DefaultValueBool;
var ds = DefaultValueString;
var di = DefaultValueInt;
}
[System.ComponentModel.DefaultValue(true)]
public bool DefaultValueBool { get; set; }
[System.ComponentModel.DefaultValue("Good")]
public string DefaultValueString { get; set; }
[System.ComponentModel.DefaultValue(27)]
public int DefaultValueInt { get; set; }
}
When you inline an initial value for a variable it will be done implicitly in the constructor anyway.
I would argue that this syntax was best practice in C# up to 5:
class Person
{
public Person()
{
//do anything before variable assignment
//assign initial values
Name = "Default Name";
//do anything after variable assignment
}
public string Name { get; set; }
}
As this gives you clear control of the order values are assigned.
As of C#6 there is a new way:
public string Name { get; set; } = "Default Name";
Sometimes I use this, if I don't want it to be actually set and persisted in my db:
class Person
{
private string _name;
public string Name
{
get
{
return string.IsNullOrEmpty(_name) ? "Default Name" : _name;
}
set { _name = value; }
}
}
Obviously if it's not a string then I might make the object nullable ( double?, int? ) and check if it's null, return a default, or return the value it's set to.
Then I can make a check in my repository to see if it's my default and not persist, or make a backdoor check in to see the true status of the backing value, before saving.
In C# 6.0 this is a breeze!
You can do it in the Class declaration itself, in the property declaration statements.
public class Coordinate
{
public int X { get; set; } = 34; // get or set auto-property with initializer
public int Y { get; } = 89; // read-only auto-property with initializer
public int Z { get; } // read-only auto-property with no initializer
// so it has to be initialized from constructor
public Coordinate() // .ctor()
{
Z = 42;
}
}
Starting with C# 6.0, We can assign default value to auto-implemented properties.
public string Name { get; set; } = "Some Name";
We can also create read-only auto implemented property like:
public string Name { get; } = "Some Name";
See: C# 6: First reactions , Initializers for automatically implemented properties - By Jon Skeet
In Version of C# (6.0) & greater, you can do :
For Readonly properties
public int ReadOnlyProp => 2;
For both Writable & Readable properties
public string PropTest { get; set; } = "test";
In current Version of C# (7.0), you can do : (The snippet rather displays how you can use expression bodied get/set accessors to make is more compact when using with backing fields)
private string label = "Default Value";
// Expression-bodied get / set accessors.
public string Label
{
get => label;
set => this.label = value;
}
In C# 9.0 was added support of init keyword - very useful and extremly sophisticated way for declaration read-only auto-properties:
Declare:
class Person
{
public string Name { get; init; } = "Anonymous user";
}
~Enjoy~ Use:
// 1. Person with default name
var anonymous = new Person();
Console.WriteLine($"Hello, {anonymous.Name}!");
// > Hello, Anonymous user!
// 2. Person with assigned value
var me = new Person { Name = "#codez0mb1e"};
Console.WriteLine($"Hello, {me.Name}!");
// > Hello, #codez0mb1e!
// 3. Attempt to re-assignment Name
me.Name = "My fake";
// > Compilation error: Init-only property can only be assigned in an object initializer
In addition to the answer already accepted, for the scenario when you want to define a default property as a function of other properties you can use expression body notation on C#6.0 (and higher) for even more elegant and concise constructs like:
public class Person{
public string FullName => $"{First} {Last}"; // expression body notation
public string First { get; set; } = "First";
public string Last { get; set; } = "Last";
}
You can use the above in the following fashion
var p = new Person();
p.FullName; // First Last
p.First = "Jon";
p.Last = "Snow";
p.FullName; // Jon Snow
In order to be able to use the above "=>" notation, the property must be read only, and you do not use the get accessor keyword.
Details on MSDN
In C# 6 and above you can simply use the syntax:
public object Foo { get; set; } = bar;
Note that to have a readonly property simply omit the set, as so:
public object Foo { get; } = bar;
You can also assign readonly auto-properties from the constructor.
Prior to this I responded as below.
I'd avoid adding a default to the constructor; leave that for dynamic assignments and avoid having two points at which the variable is assigned (i.e. the type default and in the constructor). Typically I'd simply write a normal property in such cases.
One other option is to do what ASP.Net does and define defaults via an attribute:
http://msdn.microsoft.com/en-us/library/system.componentmodel.defaultvalueattribute.aspx
My solution is to use a custom attribute that provides default value property initialization by constant or using property type initializer.
[AttributeUsage(AttributeTargets.Property, AllowMultiple = false, Inherited = true)]
public class InstanceAttribute : Attribute
{
public bool IsConstructorCall { get; private set; }
public object[] Values { get; private set; }
public InstanceAttribute() : this(true) { }
public InstanceAttribute(object value) : this(false, value) { }
public InstanceAttribute(bool isConstructorCall, params object[] values)
{
IsConstructorCall = isConstructorCall;
Values = values ?? new object[0];
}
}
To use this attribute it's necessary to inherit a class from special base class-initializer or use a static helper method:
public abstract class DefaultValueInitializer
{
protected DefaultValueInitializer()
{
InitializeDefaultValues(this);
}
public static void InitializeDefaultValues(object obj)
{
var props = from prop in obj.GetType().GetProperties()
let attrs = prop.GetCustomAttributes(typeof(InstanceAttribute), false)
where attrs.Any()
select new { Property = prop, Attr = ((InstanceAttribute)attrs.First()) };
foreach (var pair in props)
{
object value = !pair.Attr.IsConstructorCall && pair.Attr.Values.Length > 0
? pair.Attr.Values[0]
: Activator.CreateInstance(pair.Property.PropertyType, pair.Attr.Values);
pair.Property.SetValue(obj, value, null);
}
}
}
Usage example:
public class Simple : DefaultValueInitializer
{
[Instance("StringValue")]
public string StringValue { get; set; }
[Instance]
public List<string> Items { get; set; }
[Instance(true, 3,4)]
public Point Point { get; set; }
}
public static void Main(string[] args)
{
var obj = new Simple
{
Items = {"Item1"}
};
Console.WriteLine(obj.Items[0]);
Console.WriteLine(obj.Point);
Console.WriteLine(obj.StringValue);
}
Output:
Item1
(X=3,Y=4)
StringValue
little complete sample:
using System.ComponentModel;
private bool bShowGroup ;
[Description("Show the group table"), Category("Sea"),DefaultValue(true)]
public bool ShowGroup
{
get { return bShowGroup; }
set { bShowGroup = value; }
}
You can simple put like this
public sealed class Employee
{
public int Id { get; set; } = 101;
}
In the constructor. The constructor's purpose is to initialized it's data members.
private string name;
public string Name
{
get
{
if(name == null)
{
name = "Default Name";
}
return name;
}
set
{
name = value;
}
}
Have you tried using the DefaultValueAttribute or ShouldSerialize and Reset methods in conjunction with the constructor? I feel like one of these two methods is necessary if you're making a class that might show up on the designer surface or in a property grid.
Use the constructor because "When the constructor is finished, Construction should be finished". properties are like states your classes hold, if you had to initialize a default state, you would do that in your constructor.
To clarify, yes, you need to set default values in the constructor for class derived objects. You will need to ensure the constructor exists with the proper access modifier for construction where used. If the object is not instantiated, e.g. it has no constructor (e.g. static methods) then the default value can be set by the field. The reasoning here is that the object itself will be created only once and you do not instantiate it.
#Darren Kopp - good answer, clean, and correct. And to reiterate, you CAN write constructors for Abstract methods. You just need to access them from the base class when writing the constructor:
Constructor at Base Class:
public BaseClassAbstract()
{
this.PropertyName = "Default Name";
}
Constructor at Derived / Concrete / Sub-Class:
public SubClass() : base() { }
The point here is that the instance variable drawn from the base class may bury your base field name. Setting the current instantiated object value using "this." will allow you to correctly form your object with respect to the current instance and required permission levels (access modifiers) where you are instantiating it.
public Class ClassName{
public int PropName{get;set;}
public ClassName{
PropName=0; //Default Value
}
}
This is old now, and my position has changed. I'm leaving the original answer for posterity only.
Personally, I don't see the point of making it a property at all if you're not going to do anything at all beyond the auto-property. Just leave it as a field. The encapsulation benefit for these item are just red herrings, because there's nothing behind them to encapsulate. If you ever need to change the underlying implementation you're still free to refactor them as properties without breaking any dependent code.
Hmm... maybe this will be the subject of it's own question later
class Person
{
/// Gets/sets a value indicating whether auto
/// save of review layer is enabled or not
[System.ComponentModel.DefaultValue(true)]
public bool AutoSaveReviewLayer { get; set; }
}
I know this is an old question, but it came up when I was looking for how to have a default value that gets inherited with the option to override, I came up with
//base class
public class Car
{
public virtual string FuelUnits
{
get { return "gasoline in gallons"; }
protected set { }
}
}
//derived
public class Tesla : Car
{
public override string FuelUnits => "ampere hour";
}
I think this would do it for ya givng SomeFlag a default of false.
private bool _SomeFlagSet = false;
public bool SomeFlag
{
get
{
if (!_SomeFlagSet)
SomeFlag = false;
return SomeFlag;
}
set
{
if (!_SomeFlagSet)
_SomeFlagSet = true;
SomeFlag = value;
}
}
This question already has answers here:
Using PropertyInfo to find out the property type
(2 answers)
Closed 4 years ago.
I'm working with a class whose instances are used to manages various booleans.
public bool walkable = true;
public bool current = false;
public bool target = false;
public bool selectable = false;
public bool visited = false;
public Tile parent = null;
public int distance = 0;
There's also this Reset utility function, that will just set all of the booleans back to 0
public void Reset ()
{
walkable = false;
...
}
Rather than writing out every attribute, I was hoping I could just have the function switch off any booleans that might belong to a given instance that this gets called on.
Poking around the internet I keep finding stuff on reflection, but as far as I have read this only works when one has a reference to the actual instance (not within the class definition), from the C# docs:
// Using GetType to obtain type information:
int i = 42;
System.Type type = i.GetType();
System.Console.WriteLine(type);
Is switching off the booleans from within the instance based on property possible? Is it a dumb thing to want to do? Perhaps I would be better off keeping track of the booleans in a Dictionary?
Rather than paying the cost of reflection, you could pay a much smaller cost by re-initializing an instance behind your facade.
public class AllThoseBooleans {
// expose values
public bool walkable => actual.walkable;
public bool current => actual.current;
public bool target => actual.target;
// real values defined here.
private class Actuals {
private bool walkable {get; set;}
private bool current {get; set;}
private bool target {get; set;}
}
private Actuals actual {get; set;} = new Actuals();
// reset all values to default by initialization
public void ResetAll() {
actual = new Actuals();
}
}
Please note: I didn't run this or test the access modifiers; you might have to tweak that but the concept holds: your class of booleans can "have a" store that can be re-initialized much much cheaper than reflection.
You can do this (Here Test is the class which has all the booleans):
Test test = new Test();
FieldInfo[] fields = typeof(Test).GetFields(); // Obtain all fields
foreach (var field in fields) // Loop through fields
{
string name = field.Name; // Get string name
object temp = field.GetValue(test); // Get value
if (temp is bool) // if it is a bool.
field.SetValue(test, false);
Console.WriteLine("name: {0} value: {1}",field.Name, field.GetValue(test));
}
Input class:
public class Test
{
public bool walkable = true;
public bool current = true;
public bool target = true;
public bool selectable = true;
public bool visited = true;
public string parent = null;
public int distance = 0;
}
Output:
name: walkable value: False
name: current value: False
name: target value: False
name: selectable value: False
name: visited value: False
name: parent value:
name: distance value: 0
I'm using EF4.3 so I'm referring to entities, however it could apply to any class containing properties.
I'm trying to figure out if its possible to compare 2 entities. Each entity has properties that are assigned values for clarity let say the entity is 'Customer'.
public partial class Customer
{
public string Name { get; set; }
public DateTime DateOfBirth { get; set; }
...
...
}
The customer visits my website and types in some details 'TypedCustomer'. I check this against the database and if some of the data matches, I return a record from the database 'StoredCustomer'.
So at this point I've identified that its the same customer returning but I wan't to valid the rest of the data. I could check each property one by one, but there are a fair few to check. Is it possible to make this comparison at a higher level which takes into account the current values of each?
if(TypedCustomer == StoredCustomer)
{
.... do something
}
If you're storing these things in the database, it is logical to assume you'd also have a primary key called something like Id.
public partial class Customer
{
public int Id { get; set; }
public string Name { get; set; }
public DateTime DateOfBirth { get; set; }
...
...
}
Then all you do is:
if(TypedCustomer.Id == StoredCustomer.Id)
{
}
UPDATE:
In my project, I have a comparer for these circumstances:
public sealed class POCOComparer<TPOCO> : IEqualityComparer<TPOCO> where TPOCO : class
{
public bool Equals(TPOCO poco1, TPOCO poco2)
{
if (poco1 != null && poco2 != null)
{
bool areSame = true;
foreach(var property in typeof(TPOCO).GetPublicProperties())
{
object v1 = property.GetValue(poco1, null);
object v2 = property.GetValue(poco2, null);
if (!object.Equals(v1, v2))
{
areSame = false;
break;
}
});
return areSame;
}
return poco1 == poco2;
} // eo Equals
public int GetHashCode(TPOCO poco)
{
int hash = 0;
foreach(var property in typeof(TPOCO).GetPublicProperties())
{
object val = property.GetValue(poco, null);
hash += (val == null ? 0 : val.GetHashCode());
});
return hash;
} // eo GetHashCode
} // eo class POCOComparer
Uses an extension method:
public static partial class TypeExtensionMethods
{
public static PropertyInfo[] GetPublicProperties(this Type self)
{
self.ThrowIfDefault("self");
return self.GetProperties(BindingFlags.Public | BindingFlags.Instance).Where((property) => property.GetIndexParameters().Length == 0 && property.CanRead && property.CanWrite).ToArray();
} // eo GetPublicProperties
} // eo class TypeExtensionMethods
Most simple seems to use reflexion : get the properties and/or fields you want to compare, and loop through them to compare your two objects.
This will be done with getType(Customer).getProperties and getType(Customer).getFields, then using getValue on each field/property and comparing.
You might want to add custom informations to your fields/properties to define the ones that needs
comparing. This could be done by defining a AttributeUsageAttribute, that would inherit from FlagsAttribute for instance. You'll then have to retrieve and handle those attributes in your isEqualTo method.
I don't think there's much of a purpose to checking the entire object in this scenario - they'd have to type every property in perfectly exactly as they did before, and a simple "do they match" doesn't really tell you a lot. But assuming that's what you want, I can see a few ways of doing this:
1) Just bite the bullet and compare each field. You can do this by overriding the bool Equals method, or IEquatable<T>.Equals, or just with a custom method.
2) Reflection, looping through the properties - simple if your properties are simple data fields, but more complex if you've got complex types to worry about.
foreach (var prop in typeof(Customer).GetProperties()) {
// needs better property and value validation
bool propertyMatches = prop.GetValue(cust1, null)
.Equals(prop.GetValue(cust2, null));
}
3) Serialization - serialize both objects to XML or JSON, and compare the strings.
// JSON.NET
string s1 = JsonConvert.SerializeObject(cust1);
string s2 = JsonConvert.SerializeObject(cust2);
bool match = s1 == s2;
How do you give a C# auto-property an initial value?
I either use the constructor, or revert to the old syntax.
Using the Constructor:
class Person
{
public Person()
{
Name = "Initial Name";
}
public string Name { get; set; }
}
Using normal property syntax (with an initial value)
private string name = "Initial Name";
public string Name
{
get
{
return name;
}
set
{
name = value;
}
}
Is there a better way?
In C# 5 and earlier, to give auto implemented properties an initial value, you have to do it in a constructor.
Since C# 6.0, you can specify initial value in-line. The syntax is:
public int X { get; set; } = x; // C# 6 or higher
DefaultValueAttribute is intended to be used by the VS designer (or any other consumer) to specify a default value, not an initial value. (Even if in designed object, initial value is the default value).
At compile time DefaultValueAttribute will not impact the generated IL and it will not be read to initialize the property to that value (see DefaultValue attribute is not working with my Auto Property).
Example of attributes that impact the IL are ThreadStaticAttribute, CallerMemberNameAttribute, ...
Edited on 1/2/15
C# 6 :
With C# 6 you can initialize auto-properties directly (finally!), there are now other answers that describe that.
C# 5 and below:
Though the intended use of the attribute is not to actually set the values of the properties, you can use reflection to always set them anyway...
public class DefaultValuesTest
{
public DefaultValuesTest()
{
foreach (PropertyDescriptor property in TypeDescriptor.GetProperties(this))
{
DefaultValueAttribute myAttribute = (DefaultValueAttribute)property.Attributes[typeof(DefaultValueAttribute)];
if (myAttribute != null)
{
property.SetValue(this, myAttribute.Value);
}
}
}
public void DoTest()
{
var db = DefaultValueBool;
var ds = DefaultValueString;
var di = DefaultValueInt;
}
[System.ComponentModel.DefaultValue(true)]
public bool DefaultValueBool { get; set; }
[System.ComponentModel.DefaultValue("Good")]
public string DefaultValueString { get; set; }
[System.ComponentModel.DefaultValue(27)]
public int DefaultValueInt { get; set; }
}
When you inline an initial value for a variable it will be done implicitly in the constructor anyway.
I would argue that this syntax was best practice in C# up to 5:
class Person
{
public Person()
{
//do anything before variable assignment
//assign initial values
Name = "Default Name";
//do anything after variable assignment
}
public string Name { get; set; }
}
As this gives you clear control of the order values are assigned.
As of C#6 there is a new way:
public string Name { get; set; } = "Default Name";
Sometimes I use this, if I don't want it to be actually set and persisted in my db:
class Person
{
private string _name;
public string Name
{
get
{
return string.IsNullOrEmpty(_name) ? "Default Name" : _name;
}
set { _name = value; }
}
}
Obviously if it's not a string then I might make the object nullable ( double?, int? ) and check if it's null, return a default, or return the value it's set to.
Then I can make a check in my repository to see if it's my default and not persist, or make a backdoor check in to see the true status of the backing value, before saving.
In C# 6.0 this is a breeze!
You can do it in the Class declaration itself, in the property declaration statements.
public class Coordinate
{
public int X { get; set; } = 34; // get or set auto-property with initializer
public int Y { get; } = 89; // read-only auto-property with initializer
public int Z { get; } // read-only auto-property with no initializer
// so it has to be initialized from constructor
public Coordinate() // .ctor()
{
Z = 42;
}
}
Starting with C# 6.0, We can assign default value to auto-implemented properties.
public string Name { get; set; } = "Some Name";
We can also create read-only auto implemented property like:
public string Name { get; } = "Some Name";
See: C# 6: First reactions , Initializers for automatically implemented properties - By Jon Skeet
In Version of C# (6.0) & greater, you can do :
For Readonly properties
public int ReadOnlyProp => 2;
For both Writable & Readable properties
public string PropTest { get; set; } = "test";
In current Version of C# (7.0), you can do : (The snippet rather displays how you can use expression bodied get/set accessors to make is more compact when using with backing fields)
private string label = "Default Value";
// Expression-bodied get / set accessors.
public string Label
{
get => label;
set => this.label = value;
}
In C# 9.0 was added support of init keyword - very useful and extremly sophisticated way for declaration read-only auto-properties:
Declare:
class Person
{
public string Name { get; init; } = "Anonymous user";
}
~Enjoy~ Use:
// 1. Person with default name
var anonymous = new Person();
Console.WriteLine($"Hello, {anonymous.Name}!");
// > Hello, Anonymous user!
// 2. Person with assigned value
var me = new Person { Name = "#codez0mb1e"};
Console.WriteLine($"Hello, {me.Name}!");
// > Hello, #codez0mb1e!
// 3. Attempt to re-assignment Name
me.Name = "My fake";
// > Compilation error: Init-only property can only be assigned in an object initializer
In addition to the answer already accepted, for the scenario when you want to define a default property as a function of other properties you can use expression body notation on C#6.0 (and higher) for even more elegant and concise constructs like:
public class Person{
public string FullName => $"{First} {Last}"; // expression body notation
public string First { get; set; } = "First";
public string Last { get; set; } = "Last";
}
You can use the above in the following fashion
var p = new Person();
p.FullName; // First Last
p.First = "Jon";
p.Last = "Snow";
p.FullName; // Jon Snow
In order to be able to use the above "=>" notation, the property must be read only, and you do not use the get accessor keyword.
Details on MSDN
In C# 6 and above you can simply use the syntax:
public object Foo { get; set; } = bar;
Note that to have a readonly property simply omit the set, as so:
public object Foo { get; } = bar;
You can also assign readonly auto-properties from the constructor.
Prior to this I responded as below.
I'd avoid adding a default to the constructor; leave that for dynamic assignments and avoid having two points at which the variable is assigned (i.e. the type default and in the constructor). Typically I'd simply write a normal property in such cases.
One other option is to do what ASP.Net does and define defaults via an attribute:
http://msdn.microsoft.com/en-us/library/system.componentmodel.defaultvalueattribute.aspx
My solution is to use a custom attribute that provides default value property initialization by constant or using property type initializer.
[AttributeUsage(AttributeTargets.Property, AllowMultiple = false, Inherited = true)]
public class InstanceAttribute : Attribute
{
public bool IsConstructorCall { get; private set; }
public object[] Values { get; private set; }
public InstanceAttribute() : this(true) { }
public InstanceAttribute(object value) : this(false, value) { }
public InstanceAttribute(bool isConstructorCall, params object[] values)
{
IsConstructorCall = isConstructorCall;
Values = values ?? new object[0];
}
}
To use this attribute it's necessary to inherit a class from special base class-initializer or use a static helper method:
public abstract class DefaultValueInitializer
{
protected DefaultValueInitializer()
{
InitializeDefaultValues(this);
}
public static void InitializeDefaultValues(object obj)
{
var props = from prop in obj.GetType().GetProperties()
let attrs = prop.GetCustomAttributes(typeof(InstanceAttribute), false)
where attrs.Any()
select new { Property = prop, Attr = ((InstanceAttribute)attrs.First()) };
foreach (var pair in props)
{
object value = !pair.Attr.IsConstructorCall && pair.Attr.Values.Length > 0
? pair.Attr.Values[0]
: Activator.CreateInstance(pair.Property.PropertyType, pair.Attr.Values);
pair.Property.SetValue(obj, value, null);
}
}
}
Usage example:
public class Simple : DefaultValueInitializer
{
[Instance("StringValue")]
public string StringValue { get; set; }
[Instance]
public List<string> Items { get; set; }
[Instance(true, 3,4)]
public Point Point { get; set; }
}
public static void Main(string[] args)
{
var obj = new Simple
{
Items = {"Item1"}
};
Console.WriteLine(obj.Items[0]);
Console.WriteLine(obj.Point);
Console.WriteLine(obj.StringValue);
}
Output:
Item1
(X=3,Y=4)
StringValue
little complete sample:
using System.ComponentModel;
private bool bShowGroup ;
[Description("Show the group table"), Category("Sea"),DefaultValue(true)]
public bool ShowGroup
{
get { return bShowGroup; }
set { bShowGroup = value; }
}
You can simple put like this
public sealed class Employee
{
public int Id { get; set; } = 101;
}
In the constructor. The constructor's purpose is to initialized it's data members.
private string name;
public string Name
{
get
{
if(name == null)
{
name = "Default Name";
}
return name;
}
set
{
name = value;
}
}
Have you tried using the DefaultValueAttribute or ShouldSerialize and Reset methods in conjunction with the constructor? I feel like one of these two methods is necessary if you're making a class that might show up on the designer surface or in a property grid.
Use the constructor because "When the constructor is finished, Construction should be finished". properties are like states your classes hold, if you had to initialize a default state, you would do that in your constructor.
To clarify, yes, you need to set default values in the constructor for class derived objects. You will need to ensure the constructor exists with the proper access modifier for construction where used. If the object is not instantiated, e.g. it has no constructor (e.g. static methods) then the default value can be set by the field. The reasoning here is that the object itself will be created only once and you do not instantiate it.
#Darren Kopp - good answer, clean, and correct. And to reiterate, you CAN write constructors for Abstract methods. You just need to access them from the base class when writing the constructor:
Constructor at Base Class:
public BaseClassAbstract()
{
this.PropertyName = "Default Name";
}
Constructor at Derived / Concrete / Sub-Class:
public SubClass() : base() { }
The point here is that the instance variable drawn from the base class may bury your base field name. Setting the current instantiated object value using "this." will allow you to correctly form your object with respect to the current instance and required permission levels (access modifiers) where you are instantiating it.
public Class ClassName{
public int PropName{get;set;}
public ClassName{
PropName=0; //Default Value
}
}
This is old now, and my position has changed. I'm leaving the original answer for posterity only.
Personally, I don't see the point of making it a property at all if you're not going to do anything at all beyond the auto-property. Just leave it as a field. The encapsulation benefit for these item are just red herrings, because there's nothing behind them to encapsulate. If you ever need to change the underlying implementation you're still free to refactor them as properties without breaking any dependent code.
Hmm... maybe this will be the subject of it's own question later
class Person
{
/// Gets/sets a value indicating whether auto
/// save of review layer is enabled or not
[System.ComponentModel.DefaultValue(true)]
public bool AutoSaveReviewLayer { get; set; }
}
I know this is an old question, but it came up when I was looking for how to have a default value that gets inherited with the option to override, I came up with
//base class
public class Car
{
public virtual string FuelUnits
{
get { return "gasoline in gallons"; }
protected set { }
}
}
//derived
public class Tesla : Car
{
public override string FuelUnits => "ampere hour";
}
I think this would do it for ya givng SomeFlag a default of false.
private bool _SomeFlagSet = false;
public bool SomeFlag
{
get
{
if (!_SomeFlagSet)
SomeFlag = false;
return SomeFlag;
}
set
{
if (!_SomeFlagSet)
_SomeFlagSet = true;
SomeFlag = value;
}
}