I am relatively new to Visual Studio, C#, and using Github. I am trying to get the example for AncestralTrees working (Found here: https://github.com/fire-eggs/Ancestral-Tree). I cloned the repo and try to build, but I get a set of errors that do not make sense.
First is that AppSettings.cs and MruStripMenu.cs could not be found. Are these default config files I have to provide, or am I missing something?
And second is that .NET framework v4.5 wasn't found. For this I am a bit confused, because I thought it was backwards compatible, and I have v6.0.301 installed. To try and fix this error, I went to the website provided and downloaded it, but it wouldn't install as I already have a newer version. Again, am I missing something?
Any help would be greatly appreciated!
For the compatibility issue, .Net Core (6.0) and .Net Framework (4.5) are different animals, with .Net Core as more of a successor to Framework. They are very similar, but there are some breaking changes between Framework and Core, and if a project was intended for .Net Framework 4.5 you will want to have it installed on your system and set as the build target for the project in Visual Studio. You could probably also build for 4.7 or 4.8.
For the files, if they are part of the repo I would expect them to be there. I'd check your file system and see if the files are there, and then check the repo on github and see if they are included in the repo. If not, you may need an additional repo or you may need to manually add a NuGet package.
I did notice this at the bottom of the github page:
This program is both a demo of my GEDCOM library: YAGP, and a hopefully useful program in itself.
Where the "YAGP" text is a dead link. So I would expect to also need this project, which either no longer exists or is not public. This is probably the correct address:
https://github.com/fire-eggs/YAGP
(I submitted a change with the fixed link.)
Two most prominent error messages I get are those:
Failed to load project file 'c:\Forest\Assembly-CSharp.csproj'.
I'll also mention that I changed the omnisharp.path to latest and have installed mono in futile hopes it might help
c:\Users\myusername.vscode\extensions\ms-dotnettools.csharp-1.23.13.omnisharp\1.37.14-beta.3.msbuild\Current\Bin\Microsoft.Common.CurrentVersion.targets(1217,5):
Error: The reference assemblies for .NETFramework,Version=v4.7.1 were not found. To resolve this, install the Developer Pack (SDK/Targeting Pack) for this framework version or retarget your application. You can download .NET Framework Developer Packs at https://aka.ms/msbuild/developerpacks
I don't know if it's the core of the problem I'm having but I tried to reinstall the developer package mentioned.
My operating system is Windows 10
Alright i did open project in Visual Studio (not Code) and thn it told me that im using wrong version of .NET Framework Developer pack, after i downloaded the right one the problem is fixed so thank you all for answers
Have you tried to create a script on an object?
I want to debug an empty WebApi Project based on .NET Core 2.2.
I installed the "Core 2.2 SDK x86" and changed the target framework to 2.2:
<Project Sdk="Microsoft.NET.Sdk.Web">
<PropertyGroup>
<TargetFramework>netcoreapp2.2</TargetFramework>
</PropertyGroup>
When I started to debug this project, IIS starts, but in the route api/values I see nothing (it loads forever) and I get this error:
The target process exited without raising a CoreCLR started event.Ensure that the target process is configured to use .NET Core. This may be expected if the target process did not run on .NET Core
In my solution WPF and Class Library projects exist. I wanted to make a WebApi for it. Like I said, it's an empty base project generated by Visual Studio 2019. I just installed Core 2.2. Why do I get that error and what am I doing wrong?
I had the same issue.
I ran Program.cs file from the command line and the error message was different.
So, apparently, I didn't have the appropriate .NET Core runtime installed.
You can download it by the following link - https://dotnet.microsoft.com/download
I was facing the same issue!
I updated my Visual Studios to the most recent via the VS Installer.
While updating, I also added the following VS Workloads:
ASP.NET and web development
.NET desktop development
See about workloads here:
https://github.com/MicrosoftDocs/visualstudio-docs/blob/master/docs/install/modify-visual-studio.md
This worked for me! 😊
I did not have to downgrade or remove anything
I had to do a "clean" and "rebuild" of the project and after that it worked again.
I ran with the same problem. But for me it was that my project was running in .NET Core 2.2, which I didn't have installed. I'm using VS 2019.
So for the solution, just go to Visual Studio Installer and for your VS 2019 hit "Modify" like in the following image (it's in spanish though):
Then, click "Individual Components", like
And then, make sure you checked in ".NET Core 2.2 Runtime (EOL)" (and above like .NET Core 3.0, if you want) and click "Modify", as shown
Hope this works for you.
In my case, switching to x64 save the day.
It seems like there are lots of different causes for this. For me, it was because I had upgraded a .csproj file but I hadn't updated the image used in my docker file.
I had same issue after package upgrading. You don't need any vs update.
Just go to
dotnet.microsoft.com/download/dotnet-core/2.2
and get runtime
dotnet-hosting-2.2.7-win.
I had the same error. Remove "Microsoft.AspNetCore.All" from dependencies.
I have downgraded "Microsoft.AspNetCore.App" version and error gone .
Deleting all bin folders of my solution
building everything again did the trick for me
(.NET Core 3.1 VS 2019)
I see many answers like try and error
after searching about the issue, I got the following :
it simply depends on three parameters and they have to be compatible
Windows platform "x86,x64" you can change it from the CPU option of the visual studio
or choose any CPU hence the install .net x framework should be compatible with the windows
The target framework for the project
(check the project target framework "right-click on the project and check target framework") if it is 5 so the enabled in the third parameter should be 5 or change this one but take care you should tell the other team members if you change it
The Enabled framework go for tools and get tools and go for individuals component and chose the target framework the same as found in step 2 and press modify
Faced this issue during xUnit testing. Downgrading nuget package "Microsoft.NET.Test.Sdk" to 15.9.0 worked for me
I got this error because of a Project reference pointing to a project, that did not exist anymore (was removed in merged git-commit). Solved it by right-clicking the project, then Edit Project File, delete the reference and save.
I was trying to run a project that used net core 2.2 but I didn't have it, and there was no error(I had 1.1), so after installing the 2.2 using the "Visual Studio Installer" it worked like a charm. =)
I restarted my Visual Studio instance in Admin mode and I was able to debug.
After closing Visual Studio I can now start in normal mode and debug as expected. I'm not sure what changed though.
I was missing a reference to AWSSDK.Core. After installing the specific version and re-starting VS2019 and rebuilding, the project ran fine.
All of a sudden it stopped working. For me clean solution and re-build solution worked.
I was getting a similar error with my project: The target process exited without raising a CoreCLR started event.
My startup project was targeting multiple frameworks: netstandard2.0;netcoreapp2.2
I fixed this issue by changing my target framework from netstandard2.0 to netcoreapp2.2 using the following stackoverflow directions: How to switch between target frameworks for .NET Core projects in Visual Studio
Be sure to install the exact version of .net core that you want your project to run on
I had this issue and finally tracked it down to doing a "publish" operation with a deployment mode of: "Self contained" That resulted in dropping all .NET runtime binaries in my bin directory. Where I think things got totally messed up is I have several solutions all using that same common bin directory, each build different exe's and dll's.
Only one was for a self contained deployment as a test. I think that started mixing up some of the minor dlls for the .NET core and causing this issue. Once I purged all the dll's that were "not mine" and rebuilt things started working again. I'm using Visual Studio 2019 16.8.2 / .NET Core 3.1
I realize the original question is regarding .NET Core 2.2 but this question comes up first when searching for the main issue.
.Net Core 2.2 is required to be installed. I fixed when I added this in Visual Studio Installer.
VS2019 16.7.1 ASP.Net Core 3.1
Our Nunit test projects that issued this error, only worked with a very select set of Nunit and Microsoft packages.
Microsoft.NET.Test.sdk - 16.5
Nunit - 3.12
Nunit3TestAdapter 3.16.1
But here's the catch, you have to go into
c:\users\yourname\.nuget\packages and look for all three folders shown above. If you find any other version in those folders, delete it.
I found two versions in the Microsoft.NET.Test.SDK folder. I suspect the newer version was being loaded. Why? Because when I deleted it everything ran fine.
A corrupt layout is also possible, had this happen myself. To fix, go to projpath\bin\x64\configtype\AppX, for example:
C:\Users\Foo\Documents\Visual Studio 2019\projectname\bin\x64\Debug\AppX
Delete everything here, rebuild and you're good to go.
Since I don't see it here yet, here's what worked for me. I have a UWP project, Win32 project, and Windows application packaging project in the same solution. Running the Win32 app using FullTrustProcessLauncher.LaunchFullTrustProcessForCurrentAppAsync was giving this message and not working.
What fixed it was changing a setting in the packaging project's project settings:
Debug -> Debugger type -> Background task process: Native Only
I had same issue. Now in VS2022 you cannot download NetCore2.2.
So just download and install NetCore 2.2 from microsoft dotnet website.
https://dotnet.microsoft.com/en-us/download/dotnet/2.2
This error occurred when I tried changing C# projects in my solution to use Docker and running it:
The error went away when I changed the C# projects back to use the Visual Studio's debug server and running it:
In the Test Explorer window of Visual Studio 2019, make sure that there are no references to any *.testsettings or *.runsettings files if you are not using them intentionally. I had referenced a *.testsettings file unintentionally, and that was causing the issue.
For me, I'd just installed Visual Studio 2022 on a fresh installation of Windows 11. My project uses .Net 5, which wasn't installed by default (I only had .Net 6). I simply used the Visual Studio installer, modified my VS2022, selected Individual Components, and enabled .Net 5. Viola!
I started to get this error after updating Visual Studio from 2019 to 2022. It turned out that the project target framework was set to .Net Core 3.1, which was removed when I uninstalled VS2019, and the solution was to change it to .Net 6.0 which is the component I had selected during installation (Installing .Net Core 3.1 from the Visual Studio Installer should work as well).
To do so, right click on the project name and look for the "Target framework" option (my installation is in Spanish so that's what I presume it should say).
I've encountered this issue multiple times, using VS 2017 and VS 2019 across .NET Core 2.1, 3.1 and 5.0.
There are many conditions that can cause this problem to occur:
Microsoft Update can install a version of .Net Core at any time, automatically and outside of your awareness and knowledge.
It can also change the installation of any .Net Core SDK version's installed components.
Your version of VS has to be compatible with the version of the .Net Core SDK that you have installed.
You must have all of the following components installed for this error to be resolved/pre-empted for .NET 5.0 (please check the dotnet 5.0 site for the compatibility list by versions).
Microsoft .NET SDK 5.0.408 which includes (the following below) must all be installed and listed in the control panel:
.NET Core 5.0.17 Windows Desktop Runtime,.NET Runtime, Windows Server Hosting, Shared Framework
If any .NET Core 3.1 SDK are installed without your knowledge, you must uninstall it and repair your targeted .net core version's installation.
So i'm doing this project for my Computer Programming Class (That's due tomorrow) and i'm basically done with everything. Our school has Visual Studio 2010, and I have Visual Studio 2017. However, when I open it, it asks me to change to ".NET Framework 4.6.1" as my computer doesn't have ".Net Framework =v4.0". When I do, I can edit the program, but I can't debug/compile the program, as it outputs this error:
The reference assemblies for framework ".NETFramework,Version=v4.6.1" were not found. To resolve this, instal the SDK or Targeting Pack for this framework version... Therefore your assembly may not be correctly trageted for the framework you intend.
However, when I tried to go online and install the v4.6.1, the installer said that I had already had a version of 4.6.1 or a more updated version on my computer. I don't understand why this is, and if there's another question like this it would be helpful if you could link it as a reply. Thanks.
The answer to your problem is directly in the error message. "To resolve this, instal the SDK or Targeting Pack for this framework version."
My advice: Download and install .NET 4.0 SDK on your computer.
You can try one of these links to get the SDK:
https://www.microsoft.com/en-us/download/details.aspx?id=8279
https://www.microsoft.com/en-us/download/details.aspx?id=8442
You can also try the multi-targeting pack.
https://www.microsoft.com/en-us/download/details.aspx?id=29052
Also, checkout:
You can use the setup verification tool to diagnose your .Net Framework here: .Net Framework Setup Verification Tool or Alternative Download.
Also check the .NET Framework Setup Verification Tool User’s Guide
If you do find problems with your .Net Framework, you can use the Repair Tool to fix it, it is designed to fix issues specifically concerning the .Net Framework as well as updates: Microsoft .NET Framework Repair Tool
Hope this will be useful, good luck.
For VS2017 to support .NET 4.0, you need to make sure you've installed the correct component: