Think my understanding about OO is wrong.
Say I have these classes
public class BaseValidator{
public Result Validate(BaseRequest r){
xxxx
}
}
public class BaseRequest{
}
Then in my child class, I have this:
Public class ChildValidator : BaseValidator{
public Result Validate(ChildRequest r){
xxxx,
base.Validate(r);
}
}
public class ChildRequest: BaseRequest{
}
When using the classes:
BaseValidator cr = new ChildValidator();
ChildRequest r = new ChildRequest();
cr.Validate(r);
I thought this will call ChildValidator's Validate method, but turned out it calls BaseValidator's method.
What is the right way to do this? I want to pass my ChildValidator to another method, which takes BaseValidator as a parameter.
You are currently casting ChildValidator to BaseValidator, as such you are calling BaseValidator.Validate(BaseRequest) which at present has a different signature to ChildValidator.Validate(ChildRequest). You can pass an instance of ChildRequest to either method without issue because it inherits from BaseRequest.
Without this cast you would call ChildValidator.Validate() as you are expecting:
ChildValidator cr = new ChildValidator();
ChildRequest r = new ChildRequest();
cr.Validate(r); // Calls ChildValidator.Validate() method
If you want the ChildValidator.Validate() method to always be called then you would need to use a virtual / override method. You can't do that as your classes are currently written because you are accepting different parameter types (BaseRequest and ChildRequest).
Interfaces
You could utilise interfaces to help you out in this case, as shown below:
public interface IValidator {
bool Validate(IRequest r);
}
public class BaseValidator : IValidator {
public virtual bool Validate(IRequest r) {
return true;
}
}
public class ChildValidator : BaseValidator {
public override bool Validate(IRequest r) {
return base.Validate(r);
}
}
public interface IRequest { }
public class ChildRequest : BaseRequest { }
public class BaseRequest : IRequest { }
With the above classes / interfaces the original calls would work as follows:
BaseValidator cr = new ChildValidator(); // cast to BaseValidator
ChildRequest r = new ChildRequest();
cr.Validate(r); // Still calls ChildValidator.Validate() method
Generic Class
Alternatively, and as Jon Skeet pointed towards, you may want to look at implementing a generic Validator class. That could perhaps look something like the below:
public class Validator<T> where T : BaseRequest {
public bool Validate(T r) {
return true;
}
}
public class BaseRequest { }
public class ChildRequest : BaseRequest { }
You can use that as below:
var validator = new Validator<ChildRequest>();
ChildRequest request = new ChildRequest();
validator.Validate(r);
The best method for you will depend on the rest of your implementation and what the methods are doing.
Related
I have a parent class like this:
public class WebserviceResultPerNode
{
public List<DBMappingResult> mapTable { get; set; }
public static WebserviceResultPerNode newInstanceFromError(ErrorResponse error)
{
return new WebserviceResultPerNode
{
mapTable = null,
responseCode = error.responseCode,
responseMessage = error.responseMessage
};
}
}
It have some derived classes such as below:
public class WebserviceInsertResultPerNode : WebserviceResultPerNode
{
}
Now I want to make derived classes like WebserviceInsertResultPerNode such that when I call WebserviceInsertResultPerNode.newInstanceFromError() their return type be same as derived class not parent class. Currently return type of newInstanceFromError is type of parent class, i.e. WebserviceResultPerNode.
I want to know are there any ways to override WebserviceInsertResultPerNode.newInstanceFromError such that its return type be WebserviceInsertResultPerNode but I don't need to initialize fields of parent class without the need to rewrite them.
How can I rewrite my code to achieve this goal?
You can simply achieve this by using reflection, providing child classes will always have a parameter-less constructor:
public class WebserviceResultPerNode<T> where T : WebserviceResultPerNode<T>, new()
{
public static T NewInstanceFromError(ErrorResponse error)
{
return new T() { … };
};
}
Then the descendant class will look like this:
public class MyWebServiceResult : WebserviceResultPerNode<MyWebServiceResult> { … }
However, I do strongly recommend decomposing the factory method into a separate factory class for the sake of separation of concerns.
I have the following classes
public abstract class BaseViewPresenter { }
public abstract class BaseView<T> : UserControl
where T : BaseViewPresenter { }
public class LoginPresenter : BaseViewPresenter { }
public partial class LoginView : BaseView<LoginPresenter> { }
I have a method that looks like this (simplified)
public BaseView<BaseViewPresenter> Resolve(BaseViewPresenter model)
{
var type = model.GetType();
var viewType = _dataTemplates[type];
// Correctly creates BaseView object
var control = Activator.CreateInstance(viewType);
// Fails to cast as BaseView<BaseViewPresenter> so returns null
return control as BaseView<BaseViewPresenter>;
}
When I call this using an instances of LoginPresenter
var login = new LoginPresenter();
var ctl = Resolve(login);
The line Activator.CreateInstance(viewType) correctly resolves into a new instances of my LoginView, however control as BaseView<BaseViewPresenter> can't do the cast correctly so returns null.
Is there a way to correctly cast the control into BaseView<BaseViewPresenter> without using specific type generics?
Since LoginView inherits from BaseView<LoginPresenter>, and LoginPresenter inherits from BaseViewPresenter, I would assume there's a way to convert LoginView to BaseView<BaseViewPresenter>.
I am stuck with using .Net 3.5
This is a very frequently asked question. Let's rename your types:
abstract class Fruit { } // was BaseViewPresenter
abstract class FruitBowl<T> where T : Fruit // was BaseView
class Apple : Fruit { } // was LoginPresenter
class BowlOfApples : FruitBowl<Apple> { } // was LoginView
Your question now is:
I have a BowlOfApples, which inherits from FruitBowl<Apple>. Why can I not use it as a FruitBowl<Fruit>? An apple is a fruit, so a bowl of apples is a bowl of fruit.
No, it isn't. You can put a banana in a bowl of fruit, but you can't put a banana in a bowl of apples, and therefore a bowl of apples is not a bowl of fruit. (And by similar argument, a bowl of fruit is not a bowl of apples either.) Since the operations you can legally perform on the two types are different, they cannot be compatible.
Here is a photo of StackOverflow legend Jon Skeet demonstrating this fact:
The feature you want is called generic contravariance, and it is supported only on interfaces and delegate types when the compiler can prove that the variance is safe, and when the varying type is a reference type. For example, you can use an IEnumerable<Apple> in a context where IEnumerable<Fruit> is needed because the compiler can verify that there is no way that you can put a Banana into a sequence of fruit.
Do a search on "C# covariance and contravariance" on this site or on the web and you'll find many more details about how this feature works. In particular, my series of articles on how we designed and implemented this feature in C# 4 starts here: http://blogs.msdn.com/b/ericlippert/archive/2007/10/16/covariance-and-contravariance-in-c-part-one.aspx
I accepted Eric's answer since it provides a great explanation of why what I wanted wasn't possible, but I also thought I'd share my solution in case anyone else runs into this same problem.
I removed the generic type parameter from my original BaseView class, and created a 2nd version of the BaseView class that included the generic type parameter and specifics for it.
The first version is used by my .Resolve() method or other code that doesn't care about the specific types, and the second version is used by any code that does care, such as the implentation of a BaseView
Here's an example of how my code ended up looking
// base classes
public abstract class BaseViewPresenter { }
public abstract class BaseView : UserControl
{
public BaseViewPresenter Presenter { get; set; }
}
public abstract class BaseView<T> : BaseView
where T : BaseViewPresenter
{
public new T Presenter
{
get { return base.Presenter as T; }
set { base.Presenter = value; }
}
}
// specific classes
public class LoginPresenter : BaseViewPresenter { }
public partial class LoginView : BaseView<LoginPresenter>
{
// Can now call things like Presenter.LoginPresenterMethod()
}
// updated .Resolve method used for obtaining UI object
public BaseView Resolve(BaseViewPresenter presenter)
{
var type = model.GetType();
var viewType = _dataTemplates[type];
BaseView view = Activator.CreateInstance(viewType) as BaseView;
view.Presenter = presenter;
return view;
}
You're expecting to treat the type as being covariant with respect to the generic argument. Classes can never be covariant; you'd need to use an interface rather than (or in addition to) an abstract class to make it covariant with respect to T. You'd also need to be using C# 4.0.
My usual solution to this problem is to create an intermediary class that has access to the type-parametric class's methods through delegates. Fields can also be accessed through getters/setters.
The general pattern goes:
public abstract class Super {}
public abstract class MyAbstractType<T> where T : Super {
public MyGeneralType AsGeneralType() {
return MyGeneralType.Create(this);
}
// Depending on the context, an implicit cast operator might make things
// look nicer, though it might be too subtle to some tastes.
public static implicit operator MyGeneralType(MyAbstractType<T> t) {
return MyGeneralType.Create(t);
}
public int field;
public void MyMethod1() {}
public void MyMethod2(int argument) {}
public abstract bool MyMethod3(string argument);
}
public delegate T Getter<T>();
public delegate void Setter<T>(T value);
public delegate void MyMethod1Del();
public delegate void MyMethod2Del(int argument);
public delegate bool MyMethod3Del(string argument);
public class MyGeneralType {
public Getter<int> FieldGetter;
public Setter<int> FieldSetter;
public MyMethod1Del MyMethod1;
public MyMethod2Del MyMethod2;
public MyMethod3Del MyMethod3;
public static MyGeneralType Create<T>(MyAbstractType<T> t) where T : Super {
var g = new MyGeneralType();
g.FieldGetter = delegate { return t.field; };
g.FieldSetter = value => { t.field = value; };
g.MyMethod1 = t.MyMethod1;
g.MyMethod2 = t.MyMethod2;
g.MyMethod3 = t.MyMethod3;
return g;
}
public int field {
get { return FieldGetter(); }
set { FieldSetter(value); }
}
}
The above exemplifies getting all the methods and fields but normally I only need a few of them. This is a general solution to the problem and one could feasibly write a tool to generate these intermediary classes automatically, which I might at some point.
Try it here: https://dotnetfiddle.net/tLkmgR
Note that this is enough for all my cases, but you can be extra hacky with this:
public abstract class MyAbstractType<T> where T : Super {
// ... Same everything else ...
// data fields must become abstract getters/setters, unfortunate
public abstract int field {
get;
set;
}
public static implicit operator MyAbstractType<Super>(MyAbstractType<T> t) {
return MyGeneralType.Create(t);
}
}
public class MyGeneralType : MyAbstractType<Super> {
// ... same constructors and setter/getter
// fields but only keep method fields
// that contain the method references for
// implementations of abstract classes,
// and rename them not to clash with the
// actual method names ...
public MyMethod3Del myMethod3Ref;
// Implement abstract methods by calling the corresponding
// method references.
public override bool MyMethod3(string argument) {
return myMethod3Ref(argument);
}
// Same getters/setters but with override keyword
public override int field {
get { return FieldGetter(); }
set { FieldSetter(value); }
}
}
And there you go, now you can literally cast a MyAbstractType<Sub> where Sub : Super to a MyAbstractType<Super>, although it's no longer the same object anymore, but it does retain the same methods and data, it's sort of a complex pointer.
public class Sub : Super {}
public class MySubType : MyAbstractType<Sub> {
public int _field;
public override int field {
get { return _field; }
set { _field = value; }
}
public override bool MyMethod3(string argument) {
Console.WriteLine("hello " + argument);
return argument == "world";
}
}
public class MainClass {
public static void Main() {
MyAbstractType<Sub> sub = new MyAbstractType<Sub>();
MyAbstractType<Super> super = sub;
super.MyMethod3("hello"); // calls sub.MyMethod3();
super.field = 10; // sets sub.field
}
}
This isn't as good in my opinion, the other version of MyGeneralType is a more straighforward layer over the concrete types, plus it doesn't require rewriting the data fields, but it does actually answer the question, technically. Try it here: https://dotnetfiddle.net/S3r3ke
Example
Using these abstract classes:
public abstract class Animal {
public string name;
public Animal(string name) {
this.name = name;
}
public abstract string Sound();
}
public abstract class AnimalHouse<T> where T : Animal {
List<T> animals;
public AnimalHouse(T[] animals) {
this.animals = animals.ToList();
}
public static implicit operator GeneralAnimalHouse(AnimalHouse<T> house) {
return GeneralAnimalHouse.Create(house);
}
public List<string> HouseSounds() {
return animals.Select(animal => animal.Sound()).ToList();
}
}
We make this "general" variant:
public delegate List<string> HouseSoundsDel();
public class GeneralAnimalHouse {
public HouseSoundsDel HouseSounds;
public static GeneralAnimalHouse Create<T>(AnimalHouse<T> house) where T : Animal {
var general = new GeneralAnimalHouse();
general.HouseSounds = house.HouseSounds;
return general;
}
}
And finally with these inheritors:
public class Dog : Animal {
public Dog(string name) : base(name) {}
public override string Sound() {
return name + ": woof";
}
}
public class Cat : Animal {
public Cat(string name) : base(name) {}
public override string Sound() {
return name + ": meow";
}
}
public class DogHouse : AnimalHouse<Dog> {
public DogHouse(params Dog[] dogs) : base(dogs) {}
}
public class CatHouse : AnimalHouse<Cat> {
public CatHouse(params Cat[] cats) : base(cats) {}
}
We use it like this:
public class AnimalCity {
List<GeneralAnimalHouse> houses;
public AnimalCity(params GeneralAnimalHouse[] houses) {
this.houses = houses.ToList();
}
public List<string> CitySounds() {
var random = new Random();
return houses.SelectMany(house => house.HouseSounds())
.OrderBy(x => random.Next())
.ToList();
}
}
public class MainClass {
public static void Main() {
var fluffy = new Cat("Fluffy");
var miu = new Cat("Miu");
var snuffles = new Cat("Snuffles");
var snoopy = new Dog("Snoopy");
var marley = new Dog("Marley");
var megan = new Dog("Megan");
var catHouse = new CatHouse(fluffy, miu, snuffles);
var dogHouse = new DogHouse(snoopy, marley, megan);
var animalCity = new AnimalCity(catHouse, dogHouse);
foreach (var sound in animalCity.CitySounds()) {
Console.WriteLine(sound);
}
}
}
Output:
Miu: meow
Snoopy: woof
Snuffles: meow
Fluffy: meow
Marley: woof
Megan: woof
Notes:
I added names so it's clear that the method references carry their owner's data with them, for those unfamiliar with delegates.
The required using statements for this code are System, System.Collections.Generic, and System.Linq.
You can try it here: https://dotnetfiddle.net/6qkHL3#
A version that makes GeneralAnimalHouse a subclass of AnimalHouse<Animal> can be found here: https://dotnetfiddle.net/XS0ljg
I have the following method in public abstract A : IVirtualMachineExporter :
public override void Prepare() { ... }
I call the Prepare from another class B:
public sealed class B
{
public new ExportJobRequest Request { get { return (ExportJobRequest)base.Request; } }
private void ExportTask()
{
IVirtualMachineExporter exporter = CreateExporter();
exporter.Prepare();
}
}
Request containing public bool isAdHoc { get; set; }. I want to use information from this property inside Prepare(). How can I do this? I don't want to change Prepare() signature.
How can I do this without changing Prepare signature?
Well, somehow Prepare needs an instance to call isAdHoc on, so if you don't want to change the method signature, can you change the class or interface?
something like:
IVirtualMachineExporter exporter = CreateExporter(Request);
exporter.Prepare();
or
IVirtualMachineExporter exporter = CreateExporter();
exporter.Request = Request;
exporter.Prepare();
In class A, expose a public property IsAdhoc.
Set the IsAdhoc property on class A, prior to calling Prepare from class B.
So...
Class A
public bool IsAdhoc { get; set; }
// Inside this method, do something based on the IsAdhoc property above.
public override void Prepare() { ... }
Class B
public sealed class B
{
public new ExportJobRequest Request { get { return (ExportJobRequest)base.Request; } }
private void ExportTask()
{
IVirtualMachineExporter exporter = CreateExporter();
exporter.IsAdhoc = this.Request.isAdhoc;
exporter.Prepare();
}
}
Or, you could pass the boolean value to the CreateExporter method, which could set it on the new exporter class via its constructor.
It looks like B depends on an IVirtualMachineExporter, and the implementation of IVirtualMachineExporter (A) depends on a Request.
B shouldn't know anything about A or what it depends on. It should only care about the IVirtualMachineExporter interface and calling Prepare().
You could create it like this:
public abstract class A : IVirtualMachineExporter
{
private readonly ExportJobRequest _request;
public A(ExportJobRequest request)
{
_request = request;
}
public override void Prepare()
{
//Now Prepare() has access to the Request because
//it's contained within A, the class that actually needs it.
}
}
Similarly, pass an interface (not a concrete implementation) to the constructor for B.
public sealed class B
{
private readonly IVirtualMachineExporter _exporter;
public B(IVirtualMachineExporter exporter)
{
_exporter = exporter;
}
private void ExportTask()
{
//Can this isAdhoc property be a property of IVirtualMachineExporter,
//or can the Request be a property? Will every implementation of the
//interface have a request?
//exporter.IsAdhoc = this.Request.isAdhoc;
_exporter.Prepare();
}
}
I don't have the specifics of your design. But if B is going to depend on an interface (IVirtualMachineExplorer) then it shouldn't know or care about any of the inner details of any class that implements the interface.
I'm trying to stub out a mock with a base class parameter, and have it return the same value for every call. I can't seem to get it to work correctly, and I can't get the wording correct on Google.
Basic data structures
public abstract class Base { }
public class BaseImplA : Base { }
public class BaseImplB : Base { }
public interface IDoStuff
{
bool DoStuff(Base b);
}
Implementation:
var MockDoStuff = MockRepository.GenerateMock<IDoStuff>();
MockDoStuff.Stub(x => x.DoStuff<Arg<Base>.Is.TypeOf);
.Return(true);
The stub isn't returning true because it's type checking to BaseImpl instead of Base.
What do I need to change to get it to accept Base rather than adding stubs for each of my BaseImpl-esque types?
There are syntax errors in your sample implementation code. Furthermore, in order to set a concrete method of a Mock to return a value, the target method must be marked Virtual or Override.
Here is code that should work as desired:
public abstract class Base { }
public class BaseImplA : Base { }
public class BaseImplB : Base { }
public class IDoStuff
{
public virtual bool DoStuff(Base b)
{
return true;
}
}
Implementation
public void TestMethod1()
{
var mockDoStuff = MockRepository.GenerateMock<IDoStuff>();
mockDoStuff.Stub(x => x.DoStuff(Arg<Base>.Is.Anything)).Return(true);
Assert.IsTrue(mockDoStuff.DoStuff(new BaseImplA()));
}
I have the following classes
public abstract class BaseViewPresenter { }
public abstract class BaseView<T> : UserControl
where T : BaseViewPresenter { }
public class LoginPresenter : BaseViewPresenter { }
public partial class LoginView : BaseView<LoginPresenter> { }
I have a method that looks like this (simplified)
public BaseView<BaseViewPresenter> Resolve(BaseViewPresenter model)
{
var type = model.GetType();
var viewType = _dataTemplates[type];
// Correctly creates BaseView object
var control = Activator.CreateInstance(viewType);
// Fails to cast as BaseView<BaseViewPresenter> so returns null
return control as BaseView<BaseViewPresenter>;
}
When I call this using an instances of LoginPresenter
var login = new LoginPresenter();
var ctl = Resolve(login);
The line Activator.CreateInstance(viewType) correctly resolves into a new instances of my LoginView, however control as BaseView<BaseViewPresenter> can't do the cast correctly so returns null.
Is there a way to correctly cast the control into BaseView<BaseViewPresenter> without using specific type generics?
Since LoginView inherits from BaseView<LoginPresenter>, and LoginPresenter inherits from BaseViewPresenter, I would assume there's a way to convert LoginView to BaseView<BaseViewPresenter>.
I am stuck with using .Net 3.5
This is a very frequently asked question. Let's rename your types:
abstract class Fruit { } // was BaseViewPresenter
abstract class FruitBowl<T> where T : Fruit // was BaseView
class Apple : Fruit { } // was LoginPresenter
class BowlOfApples : FruitBowl<Apple> { } // was LoginView
Your question now is:
I have a BowlOfApples, which inherits from FruitBowl<Apple>. Why can I not use it as a FruitBowl<Fruit>? An apple is a fruit, so a bowl of apples is a bowl of fruit.
No, it isn't. You can put a banana in a bowl of fruit, but you can't put a banana in a bowl of apples, and therefore a bowl of apples is not a bowl of fruit. (And by similar argument, a bowl of fruit is not a bowl of apples either.) Since the operations you can legally perform on the two types are different, they cannot be compatible.
Here is a photo of StackOverflow legend Jon Skeet demonstrating this fact:
The feature you want is called generic contravariance, and it is supported only on interfaces and delegate types when the compiler can prove that the variance is safe, and when the varying type is a reference type. For example, you can use an IEnumerable<Apple> in a context where IEnumerable<Fruit> is needed because the compiler can verify that there is no way that you can put a Banana into a sequence of fruit.
Do a search on "C# covariance and contravariance" on this site or on the web and you'll find many more details about how this feature works. In particular, my series of articles on how we designed and implemented this feature in C# 4 starts here: http://blogs.msdn.com/b/ericlippert/archive/2007/10/16/covariance-and-contravariance-in-c-part-one.aspx
I accepted Eric's answer since it provides a great explanation of why what I wanted wasn't possible, but I also thought I'd share my solution in case anyone else runs into this same problem.
I removed the generic type parameter from my original BaseView class, and created a 2nd version of the BaseView class that included the generic type parameter and specifics for it.
The first version is used by my .Resolve() method or other code that doesn't care about the specific types, and the second version is used by any code that does care, such as the implentation of a BaseView
Here's an example of how my code ended up looking
// base classes
public abstract class BaseViewPresenter { }
public abstract class BaseView : UserControl
{
public BaseViewPresenter Presenter { get; set; }
}
public abstract class BaseView<T> : BaseView
where T : BaseViewPresenter
{
public new T Presenter
{
get { return base.Presenter as T; }
set { base.Presenter = value; }
}
}
// specific classes
public class LoginPresenter : BaseViewPresenter { }
public partial class LoginView : BaseView<LoginPresenter>
{
// Can now call things like Presenter.LoginPresenterMethod()
}
// updated .Resolve method used for obtaining UI object
public BaseView Resolve(BaseViewPresenter presenter)
{
var type = model.GetType();
var viewType = _dataTemplates[type];
BaseView view = Activator.CreateInstance(viewType) as BaseView;
view.Presenter = presenter;
return view;
}
You're expecting to treat the type as being covariant with respect to the generic argument. Classes can never be covariant; you'd need to use an interface rather than (or in addition to) an abstract class to make it covariant with respect to T. You'd also need to be using C# 4.0.
My usual solution to this problem is to create an intermediary class that has access to the type-parametric class's methods through delegates. Fields can also be accessed through getters/setters.
The general pattern goes:
public abstract class Super {}
public abstract class MyAbstractType<T> where T : Super {
public MyGeneralType AsGeneralType() {
return MyGeneralType.Create(this);
}
// Depending on the context, an implicit cast operator might make things
// look nicer, though it might be too subtle to some tastes.
public static implicit operator MyGeneralType(MyAbstractType<T> t) {
return MyGeneralType.Create(t);
}
public int field;
public void MyMethod1() {}
public void MyMethod2(int argument) {}
public abstract bool MyMethod3(string argument);
}
public delegate T Getter<T>();
public delegate void Setter<T>(T value);
public delegate void MyMethod1Del();
public delegate void MyMethod2Del(int argument);
public delegate bool MyMethod3Del(string argument);
public class MyGeneralType {
public Getter<int> FieldGetter;
public Setter<int> FieldSetter;
public MyMethod1Del MyMethod1;
public MyMethod2Del MyMethod2;
public MyMethod3Del MyMethod3;
public static MyGeneralType Create<T>(MyAbstractType<T> t) where T : Super {
var g = new MyGeneralType();
g.FieldGetter = delegate { return t.field; };
g.FieldSetter = value => { t.field = value; };
g.MyMethod1 = t.MyMethod1;
g.MyMethod2 = t.MyMethod2;
g.MyMethod3 = t.MyMethod3;
return g;
}
public int field {
get { return FieldGetter(); }
set { FieldSetter(value); }
}
}
The above exemplifies getting all the methods and fields but normally I only need a few of them. This is a general solution to the problem and one could feasibly write a tool to generate these intermediary classes automatically, which I might at some point.
Try it here: https://dotnetfiddle.net/tLkmgR
Note that this is enough for all my cases, but you can be extra hacky with this:
public abstract class MyAbstractType<T> where T : Super {
// ... Same everything else ...
// data fields must become abstract getters/setters, unfortunate
public abstract int field {
get;
set;
}
public static implicit operator MyAbstractType<Super>(MyAbstractType<T> t) {
return MyGeneralType.Create(t);
}
}
public class MyGeneralType : MyAbstractType<Super> {
// ... same constructors and setter/getter
// fields but only keep method fields
// that contain the method references for
// implementations of abstract classes,
// and rename them not to clash with the
// actual method names ...
public MyMethod3Del myMethod3Ref;
// Implement abstract methods by calling the corresponding
// method references.
public override bool MyMethod3(string argument) {
return myMethod3Ref(argument);
}
// Same getters/setters but with override keyword
public override int field {
get { return FieldGetter(); }
set { FieldSetter(value); }
}
}
And there you go, now you can literally cast a MyAbstractType<Sub> where Sub : Super to a MyAbstractType<Super>, although it's no longer the same object anymore, but it does retain the same methods and data, it's sort of a complex pointer.
public class Sub : Super {}
public class MySubType : MyAbstractType<Sub> {
public int _field;
public override int field {
get { return _field; }
set { _field = value; }
}
public override bool MyMethod3(string argument) {
Console.WriteLine("hello " + argument);
return argument == "world";
}
}
public class MainClass {
public static void Main() {
MyAbstractType<Sub> sub = new MyAbstractType<Sub>();
MyAbstractType<Super> super = sub;
super.MyMethod3("hello"); // calls sub.MyMethod3();
super.field = 10; // sets sub.field
}
}
This isn't as good in my opinion, the other version of MyGeneralType is a more straighforward layer over the concrete types, plus it doesn't require rewriting the data fields, but it does actually answer the question, technically. Try it here: https://dotnetfiddle.net/S3r3ke
Example
Using these abstract classes:
public abstract class Animal {
public string name;
public Animal(string name) {
this.name = name;
}
public abstract string Sound();
}
public abstract class AnimalHouse<T> where T : Animal {
List<T> animals;
public AnimalHouse(T[] animals) {
this.animals = animals.ToList();
}
public static implicit operator GeneralAnimalHouse(AnimalHouse<T> house) {
return GeneralAnimalHouse.Create(house);
}
public List<string> HouseSounds() {
return animals.Select(animal => animal.Sound()).ToList();
}
}
We make this "general" variant:
public delegate List<string> HouseSoundsDel();
public class GeneralAnimalHouse {
public HouseSoundsDel HouseSounds;
public static GeneralAnimalHouse Create<T>(AnimalHouse<T> house) where T : Animal {
var general = new GeneralAnimalHouse();
general.HouseSounds = house.HouseSounds;
return general;
}
}
And finally with these inheritors:
public class Dog : Animal {
public Dog(string name) : base(name) {}
public override string Sound() {
return name + ": woof";
}
}
public class Cat : Animal {
public Cat(string name) : base(name) {}
public override string Sound() {
return name + ": meow";
}
}
public class DogHouse : AnimalHouse<Dog> {
public DogHouse(params Dog[] dogs) : base(dogs) {}
}
public class CatHouse : AnimalHouse<Cat> {
public CatHouse(params Cat[] cats) : base(cats) {}
}
We use it like this:
public class AnimalCity {
List<GeneralAnimalHouse> houses;
public AnimalCity(params GeneralAnimalHouse[] houses) {
this.houses = houses.ToList();
}
public List<string> CitySounds() {
var random = new Random();
return houses.SelectMany(house => house.HouseSounds())
.OrderBy(x => random.Next())
.ToList();
}
}
public class MainClass {
public static void Main() {
var fluffy = new Cat("Fluffy");
var miu = new Cat("Miu");
var snuffles = new Cat("Snuffles");
var snoopy = new Dog("Snoopy");
var marley = new Dog("Marley");
var megan = new Dog("Megan");
var catHouse = new CatHouse(fluffy, miu, snuffles);
var dogHouse = new DogHouse(snoopy, marley, megan);
var animalCity = new AnimalCity(catHouse, dogHouse);
foreach (var sound in animalCity.CitySounds()) {
Console.WriteLine(sound);
}
}
}
Output:
Miu: meow
Snoopy: woof
Snuffles: meow
Fluffy: meow
Marley: woof
Megan: woof
Notes:
I added names so it's clear that the method references carry their owner's data with them, for those unfamiliar with delegates.
The required using statements for this code are System, System.Collections.Generic, and System.Linq.
You can try it here: https://dotnetfiddle.net/6qkHL3#
A version that makes GeneralAnimalHouse a subclass of AnimalHouse<Animal> can be found here: https://dotnetfiddle.net/XS0ljg