I need to create an interface from a Hotel PMS application to a Broadworks PBX using OCI. I am on the hotel PMS side. I have located broadworks-connector-net
1: https://github.com/cwmiller/broadworks-connector-net and I am trying to work my way in
The objective is whenever a room is checked in in the PMS application, to get the extension and instruct the PBX to open the line and assign the name of guest in it (so the receptionist can see who is calling from each room).
I have found no API manual and the Cisco sandbox is not open.
So I am working "theoretically" until I get access to the actual PBX
I have assembled this code in order to find the Extension 200. I do not even know if I am searching inside the correct Model.
var req1 = new BroadWorksConnector.Ocip.Models.UserPhoneDirectoryGetListRequest
{
SearchCriteriaExtension = new List<BroadWorksConnector.Ocip.Models.SearchCriteriaExtension>
{
new SearchCriteriaExtension
{
IsCaseInsensitive = false,
Mode = BroadWorksConnector.Ocip.Models.SearchMode.EqualTo,
Value = "200"
}
}
};
try
{
var response = await ocip.CallAsync(req1);
foreach (var row in response.DirectoryTable.Row)
{
Console.WriteLine(row.Col[0]);
}
}
catch (BroadWorksConnector.Ocip.ErrorResponseException ej)
{
SetText(ej.Message.ToString());
}
catch (ValidationException ek)
{
SetText(ek.Message.ToString());
}
Now that I theoretically have the Extension, how can I make the PBX assign a Name on that Extension and open it so it can be usable by the guest?
For the Name part, I have found the GroupVirtualOnNetEnterpriseExtensionsModifyUserRequest but I do not understand how can I set the Name for a specific Extension.
var req2 = new BroadWorksConnector.Ocip.Models.GroupVirtualOnNetEnterpriseExtensionsModifyUserRequest
{
ServiceProviderId = "test-service-provider",
GroupId = "test-group",
CallingLineIdFirstName = "Smith"
};
Generally I cannot understand how can I use this API to selectively modify a value in a model (eg to assign Smith to PhoneNumber 200 or to assign John into Device 234)
Any help appreciated.
Thank you
Related
I'm creating a new customer and adding them to a subscription in one call like so:
StripeConfiguration.SetApiKey(StripeData.ApiKey);
var customerService = new CustomerService();
var myCustomer = new CustomerCreateOptions
{
Email = stripeEmail,
Source = stripeToken,
Plan = StripeData.MonthlySubscriptionPlanId
};
Customer stripeCustomer = customerService.Create(myCustomer);
Then I used to be able to do this:
myLocalUser.StripeCustomerId = stripeCustomer.Id;
myLocalUser.StripeSubscriptionId = stripeCustomer.Subscriptions.Data[0]?.Id;
But now the API isn't returning the customer's subscriptions so the second line fails
I'm now having to call the API again with this ugly code to get the customer's subscriptionId:
if (stripeCustomer.Subscriptions != null)
{
user.StripeSubscriptionId = stripeCustomer.Subscriptions.Data[0]?.Id;
}
else
{
//get subscriptionId
var cust = customerService.Get(stripeCustomer.Id, new CustomerGetOptions
{
Expand = new System.Collections.Generic.List<string> { "subscriptions" }
});
if (cust.Subscriptions.Any())
{
stripeSubscriptionId = cust.Subscriptions.First().Id;
}
}
CustomerService.Create() doesn't have the same Expand parameter option that the Get() method does...
This is expected, as subscriptions are no longer included by default on a customer object unless you expand them since API version 2020-08-27.
Creating a customer with a source and plan is still possible (although not the recommended integration path anymore since you might run into problems with 3DS and tax rates), although since you are on a newer API version you won't get the subscriptions list back. If you can you should update to creating subscriptions via their own API.
If you however still want to use this old integration path, you can still get the subscriptions back in the customer create call, you just need to expand the subscriptions on creation:
var customerService = new CustomerService();
var myCustomer = new CustomerCreateOptions
{
Email = stripeEmail,
Source = stripeToken,
Plan = StripeData.MonthlySubscriptionPlanId
};
myCustomer.AddExpand("subscriptions");
Customer stripeCustomer = customerService.Create(myCustomer);
I am trying to get the full contents of my modules From Zoho to our local Server. The deluge code does work as it returns to me the data which is being sent via the API. However, once it reaches the API, it is null. Any idea?
Below is the deluge code:
// Create a map that holds the values of the new contact that needs to be created
evaluation_info = Map();
evaluation_info.put("BulkData",zoho.crm.getRecords("Publishers"));
data = Map();
data.put(evaluation_info);
response = invokeurl
[
url :"https://zohoapi.xxxxx.com/publisher/publish"
type :POST
parameters:data
connection:"zohowebapi"
];
info data; (data returns all the data from publishers)
Here is my ASP.NET core restful API. It does ping it and create the file but the content of the file is null.
Route("[controller]")]
[ApiController]
public class PublisherController : ControllerBase
{
[HttpGet("[action]"), HttpPost("[action]")]
public void Publish(string data)
{
(it's already null when it comes here. why?)
string JSONresult = JsonConvert.SerializeObject(data);
string path = #"C:\storage\journalytics_evaluationsv2.json";
using (var file = new StreamWriter(path, true))
{
file.WriteLine(JSONresult.ToString());
file.Close();
}
}
}
}
What am I missing? Thank you
After contacting Zoho support, the solution he offered was to loop through the data in order to get all the contents from a module (if they are more than 200 records. With the solution provided, one doesn't really need the deluge code anymore as long as you have the ZOHO api set to your account in code. This was my final solution. This solution is not scalable at all. It's best to work with the BULK CSV.
// Our own ZohoAPI which lets us connect and authenticate etc. Yours may look slightly different
ZohoApi zohoApi = new ZohoApi();
zohoApi.Initialize();
ZCRMRestClient restClient = ZCRMRestClient.GetInstance();
var allMedicalJournals = new List<ZCRMRecord>();
for (int i = 1; i <= 30; i++)
{
List<ZCRMRecord> accountAccessRecords2 =
restClient.GetModuleInstance("Journals").SearchByCriteria("Tag:equals:MedicalSet", i, 200).BulkData.ToList();
foreach (var newData in accountAccessRecords2)
allMedicalJournals.Add(newData);
}
I'm making a c# call to the Stripe.net API to fetch a balance history for a connected account. I'm trying to expand on the balance transaction object to see where the charge is coming from (ex. the customer who made the charge) as all the charges to connected accounts on my platform are from charge objects with a destination property to the connected account.
Here is my code and a screenshot of what the expanded source looks like, but think I should see a charge id or a customer or something refering me to the initial customer somewhere, but I don't...
var balanceService = new StripeBalanceService();
balanceService.ExpandSource = true;
var list = new List <string> () {
"data.source.source_transfer"
};
StripeList <StripeBalanceTransaction> balanceTransactions
= balanceService.List(
new StripeBalanceTransactionListOptions() {
Limit = 20,
Type = "payment",
Expand = list
},
new StripeRequestOptions() {
StripeConnectAccountId = accountId
}
);
foreach(var transaction in balanceTransactions) {
var test = transaction;
}
I feel like I should see a charge id (ex. ch_xxx) or a Customer value (which is null) all I see of any relevance is a payment id (ex. py_xxx)
It is possible to get the charge object(ch_xxx), it is just a little involved!
As you are using destination charges, the charge(ch_xxx) takes place on the platform account, and then a transfer(tr_xxx) is made to the connected account. That transfer creates a payment(py_xxx) on the connected account, which results in a balance transaction(txn_xxx).
As your code expands the source of those balance transactions, you get the payment(py_xxx). The payment is equivalent to a charge, so it has a source_transfer field. You can expand this field also! This will give you the transfer object(tr_xxx). Finally, the transfer has a source_transaction field, and this can be exapanded to give the original charge(ch_xxx)!
Putting that all together, you will want to expand on "data.source.source_transfer.source_transaction".
If you use a Stripe library in a dynamic language you can see this in action ... unfortunately, stripe-dotnet has an open issue right now which means that you can not do this directly. Instead, you will need to make the API calls manually by calling the various Retrieve functions on the IDs, instead of doing a single expansion. It would look something like this:
var paymentId = transaction.Source.Id;
var chargeService = new StripeChargeService();
var payment = chargeService.Get(
paymentId,
new StripeRequestOptions()
{
StripeConnectAccountId = accountId
}
);
var transferService = new StripeTransferService();
transferService.ExpandSourceTransaction = true;
var transfer = transferService.Get(payment.SourceTransferId);
var charge = transfer.SourceTransaction;
Console.WriteLine(charge.Id);
I am using stripe connect(destination payment) with the help of stripe.net library from Jaymedavis.
The problem that I am facing is that I am not able to retrieve the destination payment ID to update the metadata in the connected account. The following line returns a null preventing me from updating meta data on the connected account. But the strange thing is that when I log in to the dashboard the destination payment ID exists. I am not sure why I am not able to retreive it in code.
Is the charge creation asynchronous?. I am not sure. Stripe's connect documentation does not help either. The following line returns a null. My code is down below. Seeking help.
String deschargeID = result.Transfer.DestinationPayment;
Here is the code that I am using
var service = new StripeChargeService(ZambreroSecretKey);
var result = (Stripe.StripeCharge) null;
try {
result = service.Create(newCharge);
if (result.Paid) {
//get the chargeID on the newgen account and update the metadata.
//Returns null even though it exists in the dashboard
String deschargeID = result.Transfer.DestinationPayment;
var chargeService = new StripeChargeService(newgenSecretKey);
StripeCharge charge = chargeService.Get(deschargeID);
charge.Metadata = myDict;
Response.Redirect("PgeCustSuccess.aspx?OrderID=" + OrderID);
}
} catch (StripeException stripeException) {
Debug.WriteLine(stripeException.Message);
stripe.Text = stripeException.Message;
}
The charge object's transfer attribute is not expanded by default, meaning it's just a string with the ID of the transfer object ("tr_..."), not a full transfer object.
According to Stripe.net's documentation, you can expand the transfer attribute by adding this line:
service.ExpandTransfer = True
before sending the charge creation request.
Hello I recently got into development around EWS. One of the issue came up to me is that a client ask me to import emails into database and he wants to detect the duplicate based on InternetMessageID this way he doesn't have to import the duplicate emails and my code came up to this point.
private static string GetInternetMessageID(Microsoft.Exchange.WebServices.Data.Item email)
{
EmailMessage emailMsg = email as EmailMessage;
string returnId = string.Empty;
if ((emailMsg != null)) {
try {
emailMsg.Load();
//loads additional info, without calling this ToRecipients (and more) is empty
} catch (ArgumentException ex) {
//retry
email.Load();
}
returnId = emailMsg.InternetMessageId;
} else {
//what to do?
}
return returnId;
}
I can handle regular emails, but for special exchange objects such as contact, Calendar, Posts etc it does not work because it could not cast it to an EmailMessage object.
And I know you can extract the internetMessageId from those objects. Because the client used to have another software that extract this ID for them, maybe the property is not called internetMessageID, I think I probally have to extract it from the internetMessageHeader. However when ever I try to get it from the item object it just throws me an error. How do I get the internet messageID from these "Special" exchange items?
PS i am aware of item.id.UniqueID however that is not what I want as this id changes if I move items from folder to another folder in exchange
Only objects that have been sent via the Transport service will have an InternetMessageId so things like Contacts and Tasks because they aren't messages and have never been routed via the Transport service will never have an Internet MessageId. You probably want to look at using a few properties to do this InternetMessageId can be useful for messages PidTagSearchKey https://msdn.microsoft.com/en-us/library/office/cc815908.aspx is one that can be used (if you good this there are various examples of using this property).
If your going to use it in Code don't use the method your using to load the property on each item this is very inefficient as it will make a separate call for each object. Because these I'd's are under 256 Kb just retrieve then when using FindItems. eg
ExtendedPropertyDefinition PidTagSearchKey = new ExtendedPropertyDefinition(0x300B, MapiPropertyType.Binary);
ExtendedPropertyDefinition PidTagInternetMessageId = new ExtendedPropertyDefinition(0x1035, MapiPropertyType.String);
PropertySet psPropSet = new PropertySet(BasePropertySet.IdOnly);
psPropSet.Add(PidTagSearchKey);
psPropSet.Add(PidTagInternetMessageId);
ItemView ItemVeiwSet = new ItemView(1000);
ItemVeiwSet.PropertySet = psPropSet;
FindItemsResults<Item> fiRess = null;
do
{
fiRess = service.FindItems(WellKnownFolderName.Inbox, ItemVeiwSet);
foreach (Item itItem in fiRess)
{
Object SearchKeyVal = null;
if (itItem.TryGetProperty(PidTagSearchKey, out SearchKeyVal))
{
Console.WriteLine(BitConverter.ToString((Byte[])SearchKeyVal));
}
Object InternetMessageIdVal = null;
if (itItem.TryGetProperty(PidTagInternetMessageId, out InternetMessageIdVal))
{
Console.WriteLine(InternetMessageIdVal);
}
}
ItemVeiwSet.Offset += fiRess.Items.Count;
} while (fiRess.MoreAvailable);
If you need larger properties like the Body using the LoadPropertiesForItems Method https://blogs.msdn.microsoft.com/exchangedev/2010/03/16/loading-properties-for-multiple-items-with-one-call-to-exchange-web-services/