I have one wcf service on this site http://wswob.somee.com/wobservice.svc
I try to consume that service with my winform app. This is the error I receive when I create an instant of the service
com.somee.wobservice.IwobserviceClient myservice = new com.somee.wobservice.IwobserviceClient();
error:
Could not find default endpoint element that references contract
'com.somee.wobservice.Iwobservice' in the ServiceModel client configuration section. This
might be because no configuration file was found for your application, or because no
endpoint element matching this contract could be found in the client element.
I searched and modified my app.config file:
<system.serviceModel>
<behaviors>
<endpointBehaviors>
<behavior name="wobservice">
<clientVia />
</behavior>
</endpointBehaviors>
</behaviors>
<client>
<endpoint
name="wobservice"
address="http://wswob.somee.com/wobservice.svc"
binding="webHttpBinding"
contract="com.somee.wobservice"
behaviorConfiguration="wobservice" />
</client>
</system.serviceModel>
</configuration>
And my web.config in wcf folder:
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="false"/>
</behavior>
</serviceBehaviors>
<endpointBehaviors>
<behavior name="Web">
<webHttp/>
</behavior>
</endpointBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true">
<baseAddressPrefixFilters>
<add prefix="http://wswob.somee.com/"/>
</baseAddressPrefixFilters>
</serviceHostingEnvironment>
<bindings>
<webHttpBinding>
<binding>
<security mode="None" />
</binding>
</webHttpBinding>
</bindings>
<protocolMapping>
<add binding="basicHttpsBinding" scheme="https"/>
<add binding="basicHttpBinding" scheme="http"/>
</protocolMapping>
<services>
<service name="wobwcf.wobservice">
<endpoint address=""
binding="webHttpBinding"
behaviorConfiguration="Web"
contract="wobwcf.Iwobservice" />
</service>
</services>
</system.serviceModel>
I don't really sure which part I got wrong. My experience of wcf is just a week...
Copy system.serviceModel section from the app.config in your library project and put it in your web.config and refresh service reference. See also this answer. Could not find default endpoint element
Add "WSHttpBinding" end point in your WCF service web.config file like below
<endpoint address="web" behaviorConfiguration="jsonBehavior" binding="webHttpBinding" bindingConfiguration="webHttpBindingWithJsonP" contract="DataService.IDataService"/>
<endpoint address="" binding="wsHttpBinding" bindingConfiguration="wsHttpBinding" contract="DataService.IDataService" />
and in your app.config file write code like below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding name="WSHttpBinding_IDataService" maxBufferPoolSize="2147483647" maxReceivedMessageSize="2147483647">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/pricedataservice/DataService.svc" binding="wsHttpBinding"
bindingConfiguration="WSHttpBinding_IDataService" contract="DataService.IDataService"
name="WSHttpBinding_IDataService" />
</client>
I am sure this will fix your problem and below blog will help you to understand different type of binding in WCF service
http://www.dotnet-tricks.com/Tutorial/wcf/VE8a200713-Understanding-various-types-of-WCF-bindings.html
Add client definition in your client web.config file like below;
<system.serviceModel>
/////
<client>
<endpoint address="referencedurl"
binding="webHttpBinding" bindingConfiguration=""
contract="MemberService.IMemberService"
name="MemberServiceEndPoint"
behaviorConfiguration="Web">
</endpoint>
</client>
////
</system.serviceModel>
AND Service Reference Name must same as the Interfaces prefix. contract="ReferenceName.IMemberService"
Related
Getting the following error when attempting to start a Windows service hosting a WCF service:
Could not find a base address that matches scheme net.msmq for the endpoint with binding NetMsmqBinding. Registered base address schemes are [http].
Works fine if I remove the netmsmq binding and use the basichttp binding. Config is as below:
<system.serviceModel>
<services>
<service name="ManageContactService.ManageContact" behaviorConfiguration="ContactServiceBehavior">
<host>
<baseAddresses>
<add baseAddress="http://localhost:8888/ManageContact/ContactService"/>
</baseAddresses>
</host>
<endpoint address="net.msmq//localhost/private/testqueue" binding="netMsmqBinding"
bindingConfiguration="MyMsmqBinding" contract="ManageContactService.IManageContact" />
<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
</services>
<bindings>
<netMsmqBinding>
<binding name="MyMsmqBinding">
<security mode="None"></security>
</binding>
</netMsmqBinding>
</bindings>
<behaviors>
<serviceBehaviors>
<behavior name="ContactServiceBehavior">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="False"/>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
You need a colon:
net.msmq://localhost/private/testqueue
I am trying to create a WCF service that requires session support so I added a section in my web.config to enable wsHttpBinding. But when I test the service in the WCF Test Client and check the config it seems to have taken the default auto generated config instead of my own.
See my config :
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<behaviors>
<serviceBehaviors>
<behavior>
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="true"/>
</behavior>
</serviceBehaviors>
</behaviors>
<services>
<service name="UserService">
<endpoint address="" binding="wsHttpBinding" contract="ICenterPlaceUserService" />
</service>
</services>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
And the result :
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_ICenterPlaceUserService" sendTimeout="00:05:00" />
</basicHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost:57418/L1.WCF/CenterPlaceUserService.svc"
binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_ICenterPlaceUserService"
contract="ICenterPlaceUserService" name="BasicHttpBinding_ICenterPlaceUserService" />
</client>
</system.serviceModel>
What am I missing ?
The name attribute of the <service> attribute must have the fully-qualified name of the service class. Otherwise it will be ignored, and you'll see the behavior you're seeing: the default binding is used for the service (basicHttpBinding).
<services>
<service name="TheNamespaceOfYourClass.UserService">
<endpoint address=""
binding="wsHttpBinding"
contract="TheNamespaceOfYourContract.ICenterPlaceUserService" />
</service>
</services>
I developed a WCF in a Managed Windows Service, based on this tutorial
This is how my interface are defined :
namespace HomeAutomationWindowsService
{
[ServiceContract]
public interface IHomeAutomation
{
[OperationContract]
string connect();
[OperationContract]
Boolean sendAction(string address, string command);
}
}
And my App.config file is like this :
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding name="Unsecured">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<services>
<service name="HomeAutomationWindowsService.HomeAutomationService"
behaviorConfiguration="HomeAutomationServiceBehavior">
<host>
<baseAddresses>
<add baseAddress="http://192.168.11.178:8000/service"/>
</baseAddresses>
</host>
<!-- this endpoint is exposed at the base address provided by host: http://localhost:8000/service -->
<endpoint address=""
contract="HomeAutomationWindowsService.IHomeAutomation"
binding="wsHttpBinding"
bindingConfiguration="Unsecured" />
<!-- the mex endpoint is explosed at http://192.168.11.178:8000/ mex -->
<endpoint address="mex"
binding="mexHttpBinding"
contract="IMetadataExchange" />
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="HomeAutomationServiceBehavior">
<serviceMetadata httpGetEnabled="true"/>
<serviceDebug includeExceptionDetailInFaults="False"/>
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
When I make a call from a Console or a WPF App I can see the public methods, but when I do it using Windows Phone I can't see anything.
What I should do to make my WCF or Windows Phone communicating together.
I think WsHttpBinding is not supported by WP7. Try using BasicHttpBinding:
Web.config:
<system.serviceModel>
<services>
<service name="MyProject.MyService" behaviorConfiguration="behavior">
<endpoint address="" binding="basicHttpBinding" bindingConfiguration="binding" contract="MyProject.MyService" />
</service>
</services>
<behaviors>
<serviceBehaviors>
<behavior name="behavior">
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<bindings>
<basicHttpBinding>
<binding name="binding">
</binding>
</basicHttpBinding>
</bindings>
</system.serviceModel>
After adding the webservice to your WP7 project (add service reference) the ServiceReferences.ClientConfig should look like (adding web service with WsHttpBinding generates an empty file):
<configuration>
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="BasicHttpBinding_DataService" maxBufferSize="2147483647"
maxReceivedMessageSize="2147483647">
</basicHttpBinding>
</bindings>
<client>
<endpoint address="https://localhost:44300/Services/DataService.svc"
binding="basicHttpBinding" bindingConfiguration="BasicHttpBinding_DataService"
contract="DataService.DataService" name="BasicHttpBinding_DataService" />
</client>
</system.serviceModel>
</configuration>
I'm trying to use WCF 4 to set up a RESTful web service. I'd like the service to be accessible both using HTTP and HTTPS. By default the service is created with the following configuration which works for http but not https:
<system.serviceModel>
<behaviors>
<endpointBehaviors>
<behavior>
<webHttp helpEnabled="true" />
</behavior>
</endpointBehaviors>
</behaviors>
<protocolMapping>
<add scheme="http" binding="webHttpBinding" />
</protocolMapping>
</system.serviceModel>
I can then turn on HTTPS for the service by changing the configuration slightly to this:
<system.serviceModel>
<behaviors>
<endpointBehaviors>
<behavior>
<webHttp helpEnabled="true" />
</behavior>
</endpointBehaviors>
</behaviors>
<bindings>
<webHttpBinding >
<binding name="SecureWebBinding" >
<security mode="Transport"></security>
</binding>
</webHttpBinding>
</bindings>
<protocolMapping>
<add scheme="http" binding="webHttpBinding" bindingConfiguration="SecureWebBinding"/>
</protocolMapping>
</system.serviceModel>
My question is how do I get the service working with both?
You should try to create two separate end-points. For example,
<system.serviceModel>
<services>
<service name="MyNameSpace.MyService">
<endpoint address="https://www.example.com/MyService.svc"
binding="wsHttpBinding" bindingConfiguration="SecureWebBinding"
contract="MyNameSpace.IMyContract" />
<endpoint address="http://www.example.com/MyService.svc"
binding="basicHttpBinding"
contract="MyNameSpace.IMyContract" />
</service>
<bindings>
<webHttpBinding >
<binding name="SecureWebBinding" >
<security mode="Transport"></security>
</binding>
</webHttpBinding>
</bindings>
</services>
</system.serviceModel>
I have SSL working for my SOAP endpoint.
But as soon as I enable my REST endpoint, it throws a fit:
Could not find a base address that matches scheme http for the endpoint with binding WebHttpBinding. Registered base address schemes are [https].
My app.config:
<system.serviceModel>
<bindings>
<basicHttpBinding>
<binding name="IIncreasedBufferSize" maxBufferSize="1024000"
maxReceivedMessageSize="1024000">
<readerQuotas maxArrayLength="1024000" />
<security mode ="Transport">
<transport clientCredentialType= "None" />
</security>
</binding>
</basicHttpBinding>
</bindings>
<services>
<service behaviorConfiguration="WCFBehaviourSSL"
name="IWCF.IService">
<endpoint name="soap" address="soap" binding="basicHttpBinding" bindingConfiguration="IIncreasedBufferSize"
contract="IWCF.IServices">
<identity>
<dns value="localhost" />
</identity>
</endpoint>
<endpoint name="rest"
address="rest"
binding="webHttpBinding"
contract="IWCF.IServices"
behaviorConfiguration="REST" />
<host>
<baseAddresses>
<add baseAddress="http://localhost:8732/Design_Time_Addresses/WcfServiceLibrary2/Service1/" />
</baseAddresses>
</host>
</service>
</services>
<behaviors>
<endpointBehaviors>
<behavior name="REST">
<webHttp/>
</behavior>
</endpointBehaviors>
<serviceBehaviors>
<behavior name="WCFBehaviourSSL">
<serviceMetadata httpGetEnabled="False" httpsGetEnabled="True"/>
<serviceDebug includeExceptionDetailInFaults="True" />
</behavior>
</serviceBehaviors>
</behaviors>
</system.serviceModel>
I found this question: REST WCF Service Over SSL
But rest assured, None of the answers provided are of use.
I have certificates, and it does work with SSL using the SOAP end point. (when rest endpoint is commented out).
I was missing a WebHTTPBinding, that uses Transport security:
<webHttpBinding>
<binding name ="REST SSL">
<security mode ="Transport">
<transport clientCredentialType= "None" />
</security>
</binding>
</webHttpBinding>
. . .
<endpoint name="rest"
address="rest"
binding="webHttpBinding"
contract="IWCF.IServices"
behaviorConfiguration="REST"
bindingConfiguration="REST SSL"/>