I am trying to understand some code (for performance reasons) that is processing tasks from a queue. The code is C# .NET Framework 4.8 (And I didn't write this stuff)
I have this code creating a timer that from what I can tell should use a new thread every 10 seconds
_myTimer = new Timer(new TimerCallback(OnTimerGo), null, 0, 10000 );
Inside the onTimerGo it calls DoTask() inside of DoTask() it grabs a task off a queue and then does this
System.Threading.Tasks.Task.Factory.StartNew(ProcessTask, task).ContinueWith(c => DoTask());
My reading of this is that a new thread should start running OnTimerGo every 10 seconds, and that thread should in parralel run ProcessTask on tasks as fast as it can get them from the queue.
I inserted some code to call ThreadPool.GetMaxThreads and ThreadPool.GetAvailableThreads to figure out how many threads were in use. Then I queued up 10,000 things for it to do and let it loose.
I never see more then 4 threads in use at a time. This is running on a c4.4xlarge ec2 instance... so 16 vCPU 30 gb mem. The get max and available return over 2k. So I would expect more threads. By looking at the logging I can see that a total of 50ish different threads (by thread id) end up doing the work over the course of 20 minutes. Since the timer is set to every 10 seconds, I would expect 100 threads to be doing the work (or for it to finish sooner).
Looking at the code, the only time a running thread should stop is if it asks for a task from the queue and doesn't get one. Some other logging shows that there are never more than 2 tasks running in a thread. This is probably because they work is pretty fast. So the threads shouldn't be exiting, and I can even see from the logs that many of them end up doing as many as 500 tasks over the 20 minutes.
so... what am I missing here. Are the ThreadPool.GetMaxThreads and ThreadPool.GetAvailableThreads not accurate if run from inside a thread? Is something shutting down some of the threads while letting others keep going?
EDIT: adding more code
public static void StartScheduler()
{
lock (TimerLock)
{
if (_timerShutdown == false)
{
_myTimer = new Timer(new TimerCallback(OnTimerGo), null, 0, 10 );
const int numberOfSecondsPerMinute = 60;
const int margin = 1;
var pollEventsPerMinute = (numberOfSecondsPerMinute/SystemPreferences.TaskPollingIntervalSeconds);
_numberOfTimerCallsForHeartbeat = pollEventsPerMinute - margin;
}
}
}
private static void OnTimerGo(object state)
{
try
{
_lastTimer = DateTime.UtcNow;
var currentTickCount = Interlocked.Increment(ref _timerCallCount);
if (currentTickCount == _numberOfTimerCallsForHeartbeat)
{
Interlocked.Exchange(ref _timerCallCount, 0);
MonitoringTools.SendHeartbeatMetric(Heartbeat);
}
CheckForTasks();
}
catch (Exception e)
{
Log.Warn("Scheduler: OnTimerGo exception", e);
}
}
public static void CheckForTasks()
{
try
{
if (DoTask())
_lastStart = DateTime.UtcNow;
_lastStartOrCheck = DateTime.UtcNow;
}
catch (Exception e)
{
Log.Error("Unexpected exception checking for tasks", e);
}
}
private static bool DoTask()
{
Func<DataContext, bool> a = db =>
{
var mtid = Thread.CurrentThread.ManagedThreadId;
int totalThreads = Process.GetCurrentProcess().Threads.Count;
int maxWorkerThreads;
int maxPortThreads;
ThreadPool.GetMaxThreads(out maxWorkerThreads, out maxPortThreads);
int AvailableWorkerThreads;
int AvailablePortThreads;
ThreadPool.GetAvailableThreads(out AvailableWorkerThreads, out AvailablePortThreads);
int usedWorkerThreads = maxWorkerThreads - AvailableWorkerThreads;
string usedThreadMessage = $"Thread {mtid}: Threads in Use count: {usedWorkerThreads}";
Log.Info(usedThreadMessage);
var taskTypeAndTasks = GetTaskListTypeAndTasks();
var task = GetNextTask(db, taskTypeAndTasks.Key, taskTypeAndTasks.Value);
if (_timerShutdown)
{
Log.Debug("Task processing stopped.");
return false;
}
if (task == null)
{
Log.DebugFormat("DoTask: Idle in thread {0} ({1} tasks running)", mtid, _processingTaskLock);
return false;
}
Log.DebugFormat("DoTask: starting task {2}:{0} on thread {1}", task.Id, mtid, task.Class);
System.Threading.Tasks.Task.Factory.StartNew(ProcessTask, task).ContinueWith(c => DoTask());
Log.DebugFormat("DoTask: done ({0})", mtid);
return true;
};
return DbExtensions.WithDbWrite(ctx => a(ctx));
}
The Task.Factory.StartNew by default doesn't create a new thread. It borrows a thread from the ThreadPool instead.
The ThreadPool is intended as a small pool of reusable threads, to help amortize the cost of running frequent and lightweight operations like callbacks, continuations, event handers etc. Depleting the ThreadPool from available workers by scheduling too much work on it, results in a situation that is called saturation or starvation. And as you've already figured out, it's not a happy situation to be.
You can prevent the saturation of the ThreadPool by running your long-running work on dedicated threads instead of ThreadPool threads. This can be done by passing the TaskCreationOptions.LongRunning as argument to the Task.Factory.StartNew:
_ = Task.Factory.StartNew(ProcessTask, task, CancellationToken.None,
TaskCreationOptions.LongRunning,
TaskScheduler.Default).ContinueWith(t => DoTask(), CancellationToken.None,
TaskContinuationOptions.ExecuteSynchronously,
TaskScheduler.Default);
The above code schedules the ProcessTask(task) on a new thread, and after the invocation is completed either successfully or unsuccessfully, the DoTask will be invoked on the same thread. Finally the thread will be terminated. The discard _ signifies that the continuation Task (the task returned by the ContinueWith) is fire-and-forget. Which, to put it mildly, is architecturally suspicious. 😃
In case you are wondering why I pass the TaskScheduler.Default explicitly as argument to StartNew and ContinueWith, check out this link.
My reading of this is that a new thread should start running OnTimerGo every 10 seconds, and that thread should in parralel run ProcessTask on tasks as fast as it can get them from the queue.
Well, that is definitely not what's happening. It's a lot of uncertainty about your code, but it's clear that another DoTask is starting AFTER ProcessTask completes. And that is not parallel execution. Your line of code is this
System.Threading.Tasks.Task.Factory.StartNew(ProcessTask, task).ContinueWith(c => DoTask());
I suggest you to start another DoTask right there like this:
System.Threading.Tasks.Task.Factory.StartNew(ProcessTask, task);
DoTask();
Make sure your code is ready for parallel execution, though.
We could abort a Thread like this:
Thread thread = new Thread(SomeMethod);
.
.
.
thread.Abort();
But can I abort a Task (in .Net 4.0) in the same way not by cancellation mechanism. I want to kill the Task immediately.
The guidance on not using a thread abort is controversial. I think there is still a place for it but in exceptional circumstance. However you should always attempt to design around it and see it as a last resort.
Example;
You have a simple windows form application that connects to a blocking synchronous web service. Within which it executes a function on the web service within a Parallel loop.
CancellationTokenSource cts = new CancellationTokenSource();
ParallelOptions po = new ParallelOptions();
po.CancellationToken = cts.Token;
po.MaxDegreeOfParallelism = System.Environment.ProcessorCount;
Parallel.ForEach(iListOfItems, po, (item, loopState) =>
{
Thread.Sleep(120000); // pretend web service call
});
Say in this example, the blocking call takes 2 mins to complete. Now I set my MaxDegreeOfParallelism to say ProcessorCount. iListOfItems has 1000 items within it to process.
The user clicks the process button and the loop commences, we have 'up-to' 20 threads executing against 1000 items in the iListOfItems collection. Each iteration executes on its own thread. Each thread will utilise a foreground thread when created by Parallel.ForEach. This means regardless of the main application shutdown, the app domain will be kept alive until all threads have finished.
However the user needs to close the application for some reason, say they close the form.
These 20 threads will continue to execute until all 1000 items are processed. This is not ideal in this scenario, as the application will not exit as the user expects and will continue to run behind the scenes, as can be seen by taking a look in task manger.
Say the user tries to rebuild the app again (VS 2010), it reports the exe is locked, then they would have to go into task manager to kill it or just wait until all 1000 items are processed.
I would not blame you for saying, but of course! I should be cancelling these threads using the CancellationTokenSource object and calling Cancel ... but there are some problems with this as of .net 4.0. Firstly this is still never going to result in a thread abort which would offer up an abort exception followed by thread termination, so the app domain will instead need to wait for the threads to finish normally, and this means waiting for the last blocking call, which would be the very last running iteration (thread) that ultimately gets to call po.CancellationToken.ThrowIfCancellationRequested.
In the example this would mean the app domain could still stay alive for up to 2 mins, even though the form has been closed and cancel called.
Note that Calling Cancel on CancellationTokenSource does not throw an exception on the processing thread(s), which would indeed act to interrupt the blocking call similar to a thread abort and stop the execution. An exception is cached ready for when all the other threads (concurrent iterations) eventually finish and return, the exception is thrown in the initiating thread (where the loop is declared).
I chose not to use the Cancel option on a CancellationTokenSource object. This is wasteful and arguably violates the well known anti-patten of controlling the flow of the code by Exceptions.
Instead, it is arguably 'better' to implement a simple thread safe property i.e. Bool stopExecuting. Then within the loop, check the value of stopExecuting and if the value is set to true by the external influence, we can take an alternate path to close down gracefully. Since we should not call cancel, this precludes checking CancellationTokenSource.IsCancellationRequested which would otherwise be another option.
Something like the following if condition would be appropriate within the loop;
if (loopState.ShouldExitCurrentIteration || loopState.IsExceptional || stopExecuting) {loopState.Stop(); return;}
The iteration will now exit in a 'controlled' manner as well as terminating further iterations, but as I said, this does little for our issue of having to wait on the long running and blocking call(s) that are made within each iteration (parallel loop thread), since these have to complete before each thread can get to the option of checking if it should stop.
In summary, as the user closes the form, the 20 threads will be signaled to stop via stopExecuting, but they will only stop when they have finished executing their long running function call.
We can't do anything about the fact that the application domain will always stay alive and only be released when all foreground threads have completed. And this means there will be a delay associated with waiting for any blocking calls made within the loop to complete.
Only a true thread abort can interrupt the blocking call, and you must mitigate leaving the system in a unstable/undefined state the best you can in the aborted thread's exception handler which goes without question. Whether that's appropriate is a matter for the programmer to decide, based on what resource handles they chose to maintain and how easy it is to close them in a thread's finally block. You could register with a token to terminate on cancel as a semi workaround i.e.
CancellationTokenSource cts = new CancellationTokenSource();
ParallelOptions po = new ParallelOptions();
po.CancellationToken = cts.Token;
po.MaxDegreeOfParallelism = System.Environment.ProcessorCount;
Parallel.ForEach(iListOfItems, po, (item, loopState) =>
{
using (cts.Token.Register(Thread.CurrentThread.Abort))
{
Try
{
Thread.Sleep(120000); // pretend web service call
}
Catch(ThreadAbortException ex)
{
// log etc.
}
Finally
{
// clean up here
}
}
});
but this will still result in an exception in the declaring thread.
All things considered, interrupt blocking calls using the parallel.loop constructs could have been a method on the options, avoiding the use of more obscure parts of the library. But why there is no option to cancel and avoid throwing an exception in the declaring method strikes me as a possible oversight.
But can I abort a Task (in .Net 4.0) in the same way not by
cancellation mechanism. I want to kill the Task immediately.
Other answerers have told you not to do it. But yes, you can do it. You can supply Thread.Abort() as the delegate to be called by the Task's cancellation mechanism. Here is how you could configure this:
class HardAborter
{
public bool WasAborted { get; private set; }
private CancellationTokenSource Canceller { get; set; }
private Task<object> Worker { get; set; }
public void Start(Func<object> DoFunc)
{
WasAborted = false;
// start a task with a means to do a hard abort (unsafe!)
Canceller = new CancellationTokenSource();
Worker = Task.Factory.StartNew(() =>
{
try
{
// specify this thread's Abort() as the cancel delegate
using (Canceller.Token.Register(Thread.CurrentThread.Abort))
{
return DoFunc();
}
}
catch (ThreadAbortException)
{
WasAborted = true;
return false;
}
}, Canceller.Token);
}
public void Abort()
{
Canceller.Cancel();
}
}
disclaimer: don't do this.
Here is an example of what not to do:
var doNotDoThis = new HardAborter();
// start a thread writing to the console
doNotDoThis.Start(() =>
{
while (true)
{
Thread.Sleep(100);
Console.Write(".");
}
return null;
});
// wait a second to see some output and show the WasAborted value as false
Thread.Sleep(1000);
Console.WriteLine("WasAborted: " + doNotDoThis.WasAborted);
// wait another second, abort, and print the time
Thread.Sleep(1000);
doNotDoThis.Abort();
Console.WriteLine("Abort triggered at " + DateTime.Now);
// wait until the abort finishes and print the time
while (!doNotDoThis.WasAborted) { Thread.CurrentThread.Join(0); }
Console.WriteLine("WasAborted: " + doNotDoThis.WasAborted + " at " + DateTime.Now);
Console.ReadKey();
You shouldn't use Thread.Abort()
Tasks can be Cancelled but not aborted.
The Thread.Abort() method is (severely) deprecated.
Both Threads and Tasks should cooperate when being stopped, otherwise you run the risk of leaving the system in a unstable/undefined state.
If you do need to run a Process and kill it from the outside, the only safe option is to run it in a separate AppDomain.
This answer is about .net 3.5 and earlier.
Thread-abort handling has been improved since then, a.o. by changing the way finally blocks work.
But Thread.Abort is still a suspect solution that you should always try to avoid.
And in .net Core (.net 5+) Thread.Abort() will now throw a PlatformNotSupportedException .
Kind of underscoring the 'deprecated' point.
Everyone knows (hopefully) its bad to terminate thread. The problem is when you don't own a piece of code you're calling. If this code is running in some do/while infinite loop , itself calling some native functions, etc. you're basically stuck. When this happens in your own code termination, stop or Dispose call, it's kinda ok to start shooting the bad guys (so you don't become a bad guy yourself).
So, for what it's worth, I've written those two blocking functions that use their own native thread, not a thread from the pool or some thread created by the CLR. They will stop the thread if a timeout occurs:
// returns true if the call went to completion successfully, false otherwise
public static bool RunWithAbort(this Action action, int milliseconds) => RunWithAbort(action, new TimeSpan(0, 0, 0, 0, milliseconds));
public static bool RunWithAbort(this Action action, TimeSpan delay)
{
if (action == null)
throw new ArgumentNullException(nameof(action));
var source = new CancellationTokenSource(delay);
var success = false;
var handle = IntPtr.Zero;
var fn = new Action(() =>
{
using (source.Token.Register(() => TerminateThread(handle, 0)))
{
action();
success = true;
}
});
handle = CreateThread(IntPtr.Zero, IntPtr.Zero, fn, IntPtr.Zero, 0, out var id);
WaitForSingleObject(handle, 100 + (int)delay.TotalMilliseconds);
CloseHandle(handle);
return success;
}
// returns what's the function should return if the call went to completion successfully, default(T) otherwise
public static T RunWithAbort<T>(this Func<T> func, int milliseconds) => RunWithAbort(func, new TimeSpan(0, 0, 0, 0, milliseconds));
public static T RunWithAbort<T>(this Func<T> func, TimeSpan delay)
{
if (func == null)
throw new ArgumentNullException(nameof(func));
var source = new CancellationTokenSource(delay);
var item = default(T);
var handle = IntPtr.Zero;
var fn = new Action(() =>
{
using (source.Token.Register(() => TerminateThread(handle, 0)))
{
item = func();
}
});
handle = CreateThread(IntPtr.Zero, IntPtr.Zero, fn, IntPtr.Zero, 0, out var id);
WaitForSingleObject(handle, 100 + (int)delay.TotalMilliseconds);
CloseHandle(handle);
return item;
}
[DllImport("kernel32")]
private static extern bool TerminateThread(IntPtr hThread, int dwExitCode);
[DllImport("kernel32")]
private static extern IntPtr CreateThread(IntPtr lpThreadAttributes, IntPtr dwStackSize, Delegate lpStartAddress, IntPtr lpParameter, int dwCreationFlags, out int lpThreadId);
[DllImport("kernel32")]
private static extern bool CloseHandle(IntPtr hObject);
[DllImport("kernel32")]
private static extern int WaitForSingleObject(IntPtr hHandle, int dwMilliseconds);
While it's possible to abort a thread, in practice it's almost always a very bad idea to do so. Aborthing a thread means the thread is not given a chance to clean up after itself, leaving resources undeleted, and things in unknown states.
In practice, if you abort a thread, you should only do so in conjunction with killing the process. Sadly, all too many people think ThreadAbort is a viable way of stopping something and continuing on, it's not.
Since Tasks run as threads, you can call ThreadAbort on them, but as with generic threads you almost never want to do this, except as a last resort.
I faced a similar problem with Excel's Application.Workbooks.
If the application is busy, the method hangs eternally. My approach was simply to try to get it in a task and wait, if it takes too long, I just leave the task be and go away (there is no harm "in this case", Excel will unfreeze the moment the user finishes whatever is busy).
In this case, it's impossible to use a cancellation token. The advantage is that I don't need excessive code, aborting threads, etc.
public static List<Workbook> GetAllOpenWorkbooks()
{
//gets all open Excel applications
List<Application> applications = GetAllOpenApplications();
//this is what we want to get from the third party library that may freeze
List<Workbook> books = null;
//as Excel may freeze here due to being busy, we try to get the workbooks asynchronously
Task task = Task.Run(() =>
{
try
{
books = applications
.SelectMany(app => app.Workbooks.OfType<Workbook>()).ToList();
}
catch { }
});
//wait for task completion
task.Wait(5000);
return books; //handle outside if books is null
}
This is my implementation of an idea presented by #Simon-Mourier, using the dotnet thread, short and simple code:
public static bool RunWithAbort(this Action action, int milliseconds)
{
if (action == null) throw new ArgumentNullException(nameof(action));
var success = false;
var thread = new Thread(() =>
{
action();
success = true;
});
thread.IsBackground = true;
thread.Start();
thread.Join(milliseconds);
thread.Abort();
return success;
}
You can "abort" a task by running it on a thread you control and aborting that thread. This causes the task to complete in a faulted state with a ThreadAbortException. You can control thread creation with a custom task scheduler, as described in this answer. Note that the caveat about aborting a thread applies.
(If you don't ensure the task is created on its own thread, aborting it would abort either a thread-pool thread or the thread initiating the task, neither of which you typically want to do.)
using System;
using System.Threading;
using System.Threading.Tasks;
...
var cts = new CancellationTokenSource();
var task = Task.Run(() => { while (true) { } });
Parallel.Invoke(() =>
{
task.Wait(cts.Token);
}, () =>
{
Thread.Sleep(1000);
cts.Cancel();
});
This is a simple snippet to abort a never-ending task with CancellationTokenSource.
I am playing with the async/await in the C# and while I think that I understand most of the concepts, I can not explain why the code line "var rxres = await ..." first time runs on my UDP thread, and after further receptions of the packets runs on the worker thread. As far as I understand, I am not "yielding" back to the thread function and it is still alive and so all invocations of ReceiveAsync should run on the thread I created.
static void Main(string[] args)
{
var ewh = new EventWaitHandle(false, EventResetMode.ManualReset);
var udpThread = new Thread(async () =>
{
ListenUdpAsync().Wait();
});
udpThread.Name = "UDP THREAD";
udpThread.Start();
ewh.WaitOne();
}
static public async Task ListenUdpAsync()
{
var localPort = 5555;
var localBind = new IPEndPoint(IPAddress.Any, localPort);
using (var udpc = new UdpClient(localBind))
{
while(true)
{
var rxres = await udpc.ReceiveAsync();
Console.WriteLine("Rx From: " + rxres.RemoteEndPoint);
Console.WriteLine("Rx Data: " + Encoding.ASCII.GetString(rxres.Buffer));
}
}
}
I am not "yielding" back to the thread function
The method yields once hitting await udpc.ReceiveAsync(), that is how async-await works. ListenAsync itself synchronously blocks, but since there is no sync context that comes into play, the continuation is able to marshal itself onto an arbitrary thread pool thread.
so all invocations of ReceiveAsync should run on the thread I created.
Not really. Generally, when you're running inside a console application, it uses the default TaskScheduler, which internally uses the thread pool to execute continuations on an arbitrary threadpool thread. Ones ReceiveAsync() completes, its continuation needs to be scheduled somewhere, and that place is on the thread pool.
On a side note - there is no reason to use the async modifier on the delegate, as you're not awaiting anything inside, but synchronously blocking.
I have a method called WaitForAction, which takes an Action delegate and executes it in a new Task. The method blocks until the task completes or until a timeout expires. It uses ManualResetEvent to wait for timeout/completion.
The following code shows an attempt to test the method in a multi-threaded environment.
class Program
{
public static void Main()
{
List<Foo> list = new List<Foo>();
for (int i = 0; i < 10; i++)
{
Foo foo = new Foo();
list.Add(foo);
foo.Bar();
}
SpinWait.SpinUntil(() => list.Count(f => f.finished || f.failed) == 10, 2000);
Debug.WriteLine(list.Count(f => f.finished));
}
}
public class Foo
{
public volatile bool finished = false;
public volatile bool failed = false;
public void Bar()
{
Task.Factory.StartNew(() =>
{
try
{
WaitForAction(1000, () => { });
finished = true;
}
catch
{
failed = true;
}
});
}
private void WaitForAction(int iMsToWait, Action action)
{
using (ManualResetEvent waitHandle = new ManualResetEvent(false))
{
Task.Factory.StartNew(() =>
{
action();
waitHandle.SafeSet();
});
if (waitHandle.SafeWaitOne(iMsToWait) == false)
{
throw new Exception("Timeout");
}
}
}
}
As the Action is doing nothing I would expect the 10 tasks started by calling Foo.Bar 10 times to complete well within the timeout. Sometimes this happens, but usually the program takes 2 seconds to execute and reports that only 2 instances of Foo 'finished' without error. In other words, 8 calls to WaitForAction have timed out.
I'm assuming that WaitForAction is thread safe, as each call on a Task-provided thread has its own stack. I have more or less proved this by logging the thread ID and wait handle ID for each call.
I realise that this code presented is a daft example, but I am interested in the principle. Is it possible for the task scheduler to be scheduling a task running the action delegate to the same threadpool thread that is already waiting for another action to complete? Or is there something else going on that I've missed?
Task.Factory utilizes the ThreadPool by default. With every call to WaitHandle.WaitOne, you block a worker thread. The .Net 4/4.5 thread pool starts with a small number of worker threads depending on your hardware platform (e.g., 4 on my machine) and it re-evaluates the pool size periodically (I believe it is every 1 second), creating new workers if necessary.
Since your program blocks all worker threads, and the thread pool doesn't grow fast enough, your waithandles timeout as you saw.
To confirm this, you can either 1) increase the timeouts or 2) increase the beginning thread pool size by adding the following line to the beginning of your program:
ThreadPool.SetMinThreads(32, 4);
then you should see the timeouts don't occur.
I believe your question was more academic than anything else, but you can read about a better implementation of a task timeout mechanism here, e.g.
var task = Task.Run(someAction);
if (task == await Task.WhenAny(task, Task.Delay(millisecondsTimeout)))
await task;
else
throw new TimeoutException();
I have a long running method and I want to add timeout into it. Is it feasible to do that? Something like:
AbortWaitSeconds(20)
{
this.LongRunningMethod();
}
Where when it reached 20 seconds, the method will be aborted. The method doesn't have loop and I do not have a control/code over that method.
try this
class Program
{
static void Main(string[] args)
{
if (RunWithTimeout(LongRunningOperation, TimeSpan.FromMilliseconds(3000)))
{
Console.WriteLine("Worker thread finished.");
}
else
{
Console.WriteLine("Worker thread was aborted.");
}
}
static bool RunWithTimeout(ThreadStart threadStart, TimeSpan timeout)
{
Thread workerThread = new Thread(threadStart);
workerThread.Start();
bool finished = workerThread.Join(timeout);
if (!finished)
workerThread.Abort();
return finished;
}
static void LongRunningOperation()
{
Thread.Sleep(5000);
}
}
you can see it
See my answer to this question for a generic solution.
Do the calculation in a background thread and wait until the thread finishes. To abort calculation, use Thread.Abort(), this will throw a ThreadAbortException in the calculation thread.
You can only abort long running process from the same thread if you have a code point in which to introduce a check and exit. This is because - clearly - the thread is busy, so it can't process checks to abort itself. So, your example which only contains one call to 'LongRunningMethod' could not be aborted from the same thread. You'd need to show more code in order to get direction on that.
As a general rule, long-running tasks are best sent to different threads (e.g; via a BackgroundWorker or new Thread) so they can be aborted.
Here is a simple way to do this;
private void StartThread()
{
Thread t = new Thread(LongRunningMethod);
t.Start();
if (!t.Join(10000)) // give the operation 10s to complete
{
// the thread did not complete on its own, so we will abort it now
t.Abort();
}
}
private void LongRunningMethod()
{
// do something that'll take awhile
}
Since you have no control over that code I believe the correct approach would be to run that code using WaitHandles and the ThreadPool:
WaitHandle waitHandle = new AutoResetEvent(false);
ThreadPool.QueueUserWorkItem(new WaitCallback(<long running task delegate>), waitHandle);
WaitHandle.WaitAll(new[]{ waitHandle }, <timeout>);
Here you can find more info on how WaitHandle works.